9i DB and 9iAS

Need help in setting up 9iDB and 9iAS 1.0.2.2.1 on the same box
running solaris 8.
My question is, can I run these two on the same box, if so how?

yes, you need to install infra and apps instance using same user account
also, install infra and instance on the other servers, as it needs lot of memory.
you may end up hanging your system

Similar Messages

9i and 9ias installation on SuSE linux 7.3

Hi,
Are there any known issues involved in installation of 9i
and 9ias on SuSE linux 7.3 ??
Also please let me know what are the workarounds for those
problems and where the patches may be downloaded from ??
I am asking this question because SuSE 7.3 is not yet
certified by oracle.
Thanks,

For the database, look at
http://www.suse.com/en/support/oracle/db/9i_73.html

Diff between Oracle 9i database and 9ias application server.

Can any one brief in detail the difference between Oracle 9i database and 9ias application server.

Hi,
Your question is the answer. Oracle9i Database manages all your eBusiness data and Oracle9iAS runs all your eBusiness
applications. In a 3 tier architecture, Oracle9i Database fits in the Database tier where as Oracle9iAS fits in the middle
tier. Oracle9iAS provides an infrastructure to run different types of applications(J2EE thru OC4J, Forms applns, Portal
based applns, Wireless applns etc..)
Cheers !
-- Rajesh
Can any one brief in detail the difference between Oracle 9i database and 9ias application server.

Installing Oracle 9i Database and 9iAS on the same machine

I have read conflicting comments about this. Will Oracle 9i and 9iAS work if installed on the same server ?
I have seen a note before that the ORACLE_HOME will conflict if done.
However, for 8i it has been stated "the OAS does not seem to conflict with the Oracle 8i database, so select the default ORACLE_HOME to install".
Can you give me the diffinitive answer for 9i for this.
Many Thanks

I performed the installation and used a different Oracle_Home and had no issues. Now configuring Portal was another story...

Forms6i and 9iAS

I would appreciate if anyone can share their experiences with running web enabled forms. We are considering developing mission critical application for 70 users in Oracle Forms, but we want to make sure this is the way to go.
If you could tell me your experience with Forms performance, CPU load, what type of network bandwith is required. Is it stable? Any other thoughts?
Thank you
Dragana Solarov

Hi,
That is really great!! We are now, in the process of migrating our earlier Forms3.0 based applications to 6i/9iAS. Thank you for giving this encouraging news, boosting our confidence. Though, we are still not that clear about the changes in the hardware configurations that our clients have to make, that Oracle paper about 6iscalability has really given more light to it. Could you please give additional suggestions..
Again, thank you..
Regards,
Ranjith..
hi there,
i am currently working in Govt Dept in sydney and we have system supporting more than 250 users which is build around 6i and 9iAS .
we had few issuses when we changed to 9iAS but mostly all sorted out now .

Linux and 9iAS Installation - Some Effort Finding The Easy Way

I'm reading forums and documention for days. During the past 12 months, I spent more time as administrator of 'my versions' of Portal and 9iAS then in development process. Now, I'm ready to start clean instalation on Linux, reather then another upgrade.
I found that 9iAS 1.0.2.2.x is certified with 9i Database, but... Always there is some but...
Also, I expirienced problems with diferent distributions / versions of Linux.
Try start with hypotesis that:
1. I have not any prefered LINUX distribution or version.
2. Database 8.1.7.1 or 9i - no prejudice.
What combination can satisfy one simple criteria - clean and quick instalation - no tricks, no cheating. Just simple StepByStep guide.
Is RedHat7.2 + 9i + 9iAS 1.0.2.2.1 OK.?
Or RedHat6.2 + 8.1.7 + 1.0.2.2.1 ?
Or some Suse + ... ?
... anything that works ;)
ciao
''''Srdjan

OK. We made some progress :)
It looks like Suse is more Oracle friendly than RH :)
Damir, thanks for useful link.
In this moment, we can assume that:
- >>Suse7.2 + 9iAS 1.0.2.2.1<< will work fine.
- >>9i database + RH or Suse 7.x<<, too (according to link provided by Damir, there is acceptable procedure to get these things together).
BUT, what is with combination
9iAS 1.0.2.2.1 + 9i Database (9.0.1)<<?Is there real compatibility within these two products, or there is just casual sharing of small italic i and some numbers in their names :)
ciao
Srdjan

Which flavour of Linux to choose for database 9i Rel2 and 9iAS rel2

I am getting the Oracle 9i rel2 and 9iAS rel2 from OTN (OTN Tracks) for Linux.
I wih to know what flavour of Linux to choose (Red Hat or Suse).
Again this is only for my own PC.
Any suggestion?
Thanks,
Dhananjay

Thank you! Do I need to apply any special O/S patches first?

HTTP Server - Win2K and Oracle 8.1.7 and 9iAS

I have a problem with the APACHE WEB SERVER on Windows 2000 Server. It does not come up - I get "error 1067 - process terminated unexpectedly". I have installed Oracle 8.1.7 and installed 9iAS with no errors, using the 101 Web Apps book. However, I get the above error. Also, when I go to a dos prompt, I got "Can't locate Cwd.pm in @INC (@INC contains: .) at (eval 1) line 1."
Many reboots and reinstalls later with no errors and perusing this site, I have had no luck - I am an expert now in installing and wiping clean of Oracle... I would appreciate if any of you can assist me over the edge (I mean, over the top)...
null

So, here we are. I have Oracle 8.1.7 on the Windows 2000 server. I have tried everything, including dropping everything twice, trying to install 9iAS portal - then installing Portal 3.0.8. Even just trying to use the HTTP server from 8i. I continue to get the Error 1067 from the Win2K services trying to start the HTTP server. When I go to the prompt and run apache.exe from the apache\apache directory, I get a "Can't locate Cwd.pm in @INC (@INC contains: .) at (eval 1) line 1." message.
HELP!!

Function-Based Indexes for 8.1.6 SE and 9iAS

I have installed the 9iAS Portal into a 8.1.6 SE database, and I cannot get the Function-Based Index feature to turn on. I have set QUERY_REWRITE_INTEGRITY=trusted, QUERY_REWRITE_ENABLED=true and COMPATIBLE="8.1.0.0.0". The feature will still not enable.
I have 2 questions:
1. Is there anything else I can do to turn this feature on.
2. If not, do I have to upgrade to 8.1.7 or to 8.1.* Enterprise Edition to make use of this feature.

Could you give the statement for the index you have used, the query you try to do and a description of columns and datatypes of the table? How do you know/check that is doesn't work? Execution plan, errors?...

OC4J 9.0.3 Standalone and 9iAS 9.0.2 mid-tier

We are currently running Forms9i and Reports 9i services on a mid-tier installation of Oracle9iAS 9.0.2. (Solaris). We have also developed some JDeveloper 9.0.3 applications that need to be deployed onto the same server. I understand from previous discussions on both Metalink and OTN Discussion Forums that it is not possible to upgrade the OC4J components of the mid-tier installation to 9.0.3 as the Forms9i and Reports 9i services are only certified to work with 9iAS 9.0.2.
My next question is can I install Oracle9iAS Release 2 OC4J 9.0.3 standalone components into a separate ORACLE_HOME from the mid-tier 9iAS 9.0.2 in order to deploy the JDeveloper 9.0.3 applications ?.
Regards,
Chris

hello,
i am not sure how you invoke report services from your java application. i assume you are using a URL to access the report. in that case your application will still be able to point back to the 902 servlet to access reports services.
regarding the use of classes on the 903 application : reports services can only access classes that are in its classpath. so if you can put the classes you need in reports' classpath defined by the environment of the 902 instance you should be able to access it.
you might also look into our Thin Client that is available here on OTN. http://otn-stage.us.oracle.com/products/reports/htdocs/getstart/examples/Tools/index.html
regards,
philipp

TopLink and 9iAS/OC4J 9.0.2

We are working on project that have
to work with 9iAS/OC4J 9.0.2, upgrade
to OC4J 9.0.3 in NOT an option.
Our J2EE application will only use
Servlets/JSP (NO EJBs), we need
to do O/R mapping from Servlets to db.
How can we install / use TopLink (9.0.3
or earlier version) from 9iAS/OC4J 9.0.2 ?
Regards, Radomir.

Hi Radomir,
This shouldn't be a problem, the easiest way to set things up would be to place the TopLink.jar file in the \j2ee\home\lib folder of OC4J v9.0.2. If there is something specific that you would like answered in terms of application deployment or setup and configurations, just ask.
Darren Melanson

Attachment on Report 6i and 9ias

Hi,
We have several reports made with reports 6i which we run in pdf format through 9ias. Now we want the report to include attachments in the pdf output.
In the oracle report 6i apparantly you can only include text and bitmap files. How can we make it work for other formats so that the can be merged into one pfd output on 9ias.
Ame

Can I install report 10g, if I have report 6i already
on that machine?Yes. Just install it in new oracle home.
Is it just you need to open reports into 10G and
recompile them?.Yes. It worked for me.
Does anybody had any problems with the obselete
objects. like buttons,graphics etc.There are no buttons in 10g. I don't have any idea about graphics.
Also, I have to migrate reports 9i to 10g (for
different project) what do I need to do?Not much difference in 9i and 10g. Just recompile in 10g (9.0.4).
Also see these links
http://www.oracle.com/technology/products/reports/index.html
http://www.oracle.com/technology/products/reports/migration/index.html

Question about HTTP Server and 9iAS

I am kind of new to Oracles 9is products. I installed Oracle 9i Rel. 2 recently and it installed HTTP Server and other stuff as part of that install. I am trying to write a small web application. Is this install good enough to do basic servlet's, jsp's and may be EJB's etc ... or do I need to install 9iAS. I am confused on the fact that I know 9iAS will give me j2ee container, web container, clustering, etc ..., what functionality is included in the 9i databases web server piece.
Also, can anyone point me to a good documentation that explains directory structure of 9i Rel. 2. I am familiar with the database part fairly well(oracle 7 release). However, I am confused as to new web related stuff (Apache, bc4j, etc..) in 9i Rel. 2.
Thanks.

Hi,
No, you cannot run EJB's in the Apache installation. For that you might want to download OC4J.
Basic Http pages and Servlets can run but I dont think it is advisable to use it for that. For any kind of development, I would suggest you to use OC4J.
Oracle9i Database is web enabled and you can access the table, etc.. from a browser too. This is the reason Apache is provided with the basic installation. Oracle9i Rel 2 has XML DB in it which again can be accessed from the Web.
For more help on any of these check http://otn.oracle.com/documentation/oracle9i.html
You will be able to get all the related Developer's Guide here.
Hope this helps,
Rajat

JSP parsing different between JDev 903 and 9ias 9.0.3

Ok -- we have code which looks like the following:
<SELECT name="app_region_id">
<OPTION></OPTION>
<jbo:RowsetNavigate datasource="RegionDs" action="First" />
<jbo:RowsetIterate datasource="RegionDs" >
<jbo:Row id="RegionRow" datasource="RegionDs" action="Current" ></jbo:Row>

<OPTION VALUE="<jbo:ShowValue datasource="RegionDs" dataitem="RegionId" />"
<%=(Integer.parseInt(RegionRow.getAttribute("RegionId").toString()) == nUserRegion) ? " SELECTED " : "" %> >
<jbo:ShowValue datasource="RegionDs" dataitem="RegionName" />
</OPTION>
</jbo:RowsetIterate>
</SELECT>
Here's the problem. The regions are: 1, 2, 3, etc.
What happens is it should output: VALUE="blah"
(and does under 9iAS 9.0.2, JDev 9.0.2, Jdev 9.0.3, but not 9iAS 9.0.3)
but it outputs: VALUE="blah
(no trailing quote) under 9iAS 9.0.3
That causes some HTML issues. I have other examples of output that is strange/different when deployed, but works fine under JDev...
There are workarounds, by changing the structure a bit, but the difference in behaviour is a problem...
I posted this in the Application Server forum, but have not received a response indicating that anyone is working on this (or if it's my fault).
Jeff

repost

Please help to install oracle and 9iAS

please check the sequence :
oracle 8.1.7
9ias 3.0
winnt 4.0
sp5
installation on one machine :
product path
1. winnt : ----> c:\winnt
2. sp5
3. explorer 5.5
4. oracle 8.7 -----> d:\oracle\ora81
5. 9ias -----> d:\oracle\isuites
error encounter
[1] giving problem while createing database cache error " connect string "
[2] after installion it is coming up http://shankar/pls/portal30/admin_/gateway.htm
and not showing portal30 dad.
if i am tring to create again same problem.
please help why it is fail
thanx
null

Did you lose your default route setting?
manually;
#route add net xxx.yyy.zzz
or
automatic;
IP in "defaultrouter" file in /etc/

9i DB and 9iAS

Similar Messages

Maybe you are looking for