9i install error "error writting to C:|windows\system32\mfcan32.dll"
I'm trying to install Oracle on a "brand new" computer running WIN 2003 XP Home, so I'll be ready for the fall semester.
I was installing Oracle9i DS Release 2 (9.0.2.1) and at the "Install" screen this Oracle message.
ERROR writting to C:|windows\system32\mfcan32.dll
I then "clicked" the ignore button.
Then Windows shut down oracle and restarted with this error message.
Win signatur error
BCCode : 10000050 BCP1 : DAD45CD4 BCP2 : 00000000 BCP3 : 805020A4
BCP4 : 00000000 OSVer : 5_1_2600 SP : 2_0 Product : 768_1
MICROSOFT's REPLY
Error Caused By A Device Dr iver
I'm just to new at this and haven't got a clue so any assistance would truely be appriciated.
Mathew
You have a basic problem: You try to install desupported software on an unsupported platform.
I assume mfcan32.dll is write-protected (maybe for good reasons), you may remove write-protection and try again, but I don't know the consequences.
Similar Messages
-
Backup error due to System Writer missing (enumeration of system32 printer dlls takes too long)
Hi,
On a Windows 2008 R2 we get a Windows Backup error while backupping System State (event id: 5, error code: '2155347997').
We tried *ALL* solutions found on Internet regarding the same issue (and we also applied the suggested hotfix KB2807849) but without success. So we DIGGED INTO VSS to see what is happening.
***1) First we saw that an USB printer had a problem and this resulted in
hundreds of entries in the following registry keys:
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StillImage\DeviceNameStore\Canon MF6500 Series #100010]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StillImage\DeviceNameStore\Canon MF6500 Series #100011]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StillImage\DeviceNameStore\Canon MF6500 Series #100012]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StillImage\DeviceNameStore\{6BDD1FC6-810F-11D0-BEC7-08002BE2092F}\79590]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StillImage\DeviceNameStore\{6BDD1FC6-810F-11D0-BEC7-08002BE2092F}\79591]
***2) We completely removed ALL drivers/devices related to that printer (now the DeviceNameStore is empty and
pnputil -e returns no driver related to the printer)
***3) Using process monitor we saw that during vssadmin list writers the system is searching for the DLLs related to that printer AND SEEMS CAUGHT IN AN ENDLESS LOOP: this is an excerpt of the scan:
09:56:34,5205954 svchost.exe 324 RegSetValue HKLM\System\CurrentControlSet\services\VSS\Diag\System Writer\IDENTIFY (Enter) SUCCESS
09:57:18,2310377 svchost.exe 324 QueryDirectory C:\Windows\System32\spool\drivers\color\cnz005.icc NO SUCH FILE Filter: cnz005.icc
09:57:18,2312877 svchost.exe 324 QueryDirectory C:\Windows\System32\spool\drivers\color\cnf6500m.icc NO SUCH FILE Filter: cnf6500m.icc
09:57:18,2314854 svchost.exe 324 QueryDirectory C:\Windows\System32\cncmfp20.ini NO SUCH FILE Filter: cncmfp20.ini
09:57:18,2316416 svchost.exe 324 QueryDirectory C:\Windows\System32\cnclsi20.dll NO SUCH FILE Filter: cnclsi20.dll
... and so on
.... THE SAME FILES ARE REPEATED HUNDREDS OF TIMES!!!! ...
It seems that somewhere there is a catalog of system files which still contains the references to the (same) files used by the hundreds of devices that WERE present in the DeviceNameStore (see point ***1 above, but now it is empty), and the System
Writer continues to search/enumerate those files and fails.
How can I fix it ? Is there a way to "reset" the System Writer and "rebuild" (???) the correct files that it should backup? (in order to complete a successfull system state backup)
Can you help me?
Thank you in advance.
EDIT: some additional (useful?) information:
* we also ran chkdsk /f C:
* sfc /scannow completes without errors
* in the vssadmin list writers the "system writer" is missing (but - as said above - when we run it the associated process repeatedly search printer dll files in the System32 directory)
* perhaps those file are contained is some filemaps catalog ?!? Is there a way to "reset" them?!?
***EDIT 2***:
I found that the reference to those missing DLLs are in ***C:\Windows\inf\setupapi.ev3*** but if I move the file away the System Writer continues not being listed in vssadmin list writer (though the vssadmin command complete very fast).
This is what is happening:
svchost.exe 324 CloseFile C:\Windows\inf SUCCESS
svchost.exe 324 CloseFile C:\Windows\System32\DriverStore\infpub.dat SUCCESS
svchost.exe 324 CreateFile C:\Windows\System32\DriverStore\infpub.dat ACCESS DENIED
svchost.exe 324 CreateFile C:\Windows\System32\DriverStore\infstor.dat ACCESS DENIED
svchost.exe 324 CreateFile C:\Windows\System32\DriverStore\infstrng.dat ACCESS DENIED
svchost.exe 324 CreateFile C:\Windows\System32\DriverStore\drvindex.dat ACCESS DENIED
svchost.exe 324 CreateFile C:\Windows\System32\DriverStore\INFCACHE.0 NAME NOT FOUND
svchost.exe 324 CreateFile C:\Windows\System32\DriverStore\INFCACHE.1 ACCESS DENIED
svchost.exe 324 CreateFile C:\Windows\System32\DriverStore\INFCACHE.2 NAME NOT FOUND
svchost.exe 324 CreateFile C:\Windows\inf SUCCESS
svchost.exe 324 QueryBasicInformationFile C:\Windows\inf SUCCESS
svchost.exe 324 RegCloseKey HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup SUCCESS
svchost.exe 324 CreateFile C:\Windows\inf\setupapi.ev1 SUCCESS
svchost.exe 324 QueryStandardInformationFile C:\Windows\inf\setupapi.ev1 SUCCESS
svchost.exe 324 CreateFileMapping C:\Windows\inf\setupapi.ev1
svchost.exe 324 QueryStandardInformationFile C:\Windows\inf\setupapi.ev1 SUCCESS
svchost.exe 324 CreateFileMapping C:\Windows\inf\setupapi.ev1
svchost.exe 324 CreateFile C:\Windows\inf\setupapi.ev2 SUCCESS
svchost.exe 324 QueryStandardInformationFile C:\Windows\inf\setupapi.ev2
svchost.exe 324 CreateFileMapping C:\Windows\inf\setupapi.ev2
svchost.exe 324 QueryStandardInformationFile C:\Windows\inf\setupapi.ev2 SUCCESS
svchost.exe 324 CreateFileMapping C:\Windows\inf\setupapi.ev2
svchost.exe 324 CreateFile C:\Windows\inf\setupapi.ev3 SUCCESS
svchost.exe 324 QueryStandardInformationFile C:\Windows\inf\setupapi.ev3
svchost.exe 324 CreateFileMapping C:\Windows\inf\setupapi.ev3
svchost.exe 324 QueryStandardInformationFile C:\Windows\inf\setupapi.ev3
svchost.exe 324 CreateFileMapping C:\Windows\inf\setupapi.ev3 SUCCESS
svchost.exe 324 CreateFile C:\Windows\System32\drivers SUCCESS
svchost.exe 324 QueryDirectory C:\Windows\System32\drivers\acpi.sys SUCCESS
svchost.exe 324 QueryDirectory C:\Windows\System32\drivers\rdpbus.sys SUCCESS
svchost.exe 324 QueryDirectory C:\Windows\System32\drivers\i8042prt.sys SUCCESS
.... EVERYTHING IS OK UP TO HERE ...
svchost.exe 324 CloseFile C:\Windows\System32\drivers SUCCESS
svchost.exe 324 CreateFile C:\Windows\System32 SUCCESS
svchost.exe 324 QueryDirectory C:\Windows\System32\cncc6500.dll NO SUCH FILE Filter: cncc6500.dll
svchost.exe 324 QueryDirectory C:\Windows\System32\cnci6500.dll NO SUCH FILE Filter: cnci6500.dll
svchost.exe 324 QueryDirectory C:\Windows\System32\cncc6500.dll NO SUCH FILE Filter: cncc6500.dll
svchost.exe 324 QueryDirectory C:\Windows\System32\cnci6500.dll NO SUCH FILE Filter: cnci6500.dll
... !!!!!GET CAUGHT IN AN ENDLESS LOOP!!!!!!!! (System Writer probably ends for timeout)...
Is there a way to rebuild/modify that file C:\Windows\inf\setupapi.ev3
Perhaps I can delete the catroot2 directory?Hi,
Please check if there are number of files in Temporary ASP.NET folders under "C:\Windows\Microsoft.Net\Framework". If so, clear these files then restart the server to check the results.
In additional, you could try the steps below to troubleshoot the issue:
1. Give NETWORK SERVICE Read permissions on COM+ Event System.
a. Open the registry editor and navigate to HKLM\CurrentControlSet\Services\EventSystem.
b. Right click on the EventSystem and then select ‘Permissions’
c. Click on ‘ADD’ button and then type in ‘NETWORK SERVICE’ and give it READ permission.
d. Reboot the machine and then run the 'VSS admin list writers' to check if it shows up the 'system writer'.
2. If the step 1 doesn't work then move the contents of C:\Windows\winsxs\FileMaps to an alternate location. Then run the command 'VSS admin list writers' to check if it shows up the 'system writer'. Is so, some of those files maybe corrupted and we
need to identify them and replace the files from a healthy machine.
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
every time I try to open itunes i get this message, C:\windows\system32\softpub.dll is either not designed to run on windows or contains an error. what should i do to fix this problem.
I suggest that you reinstall the Microsoft Visual Studio 2010 redistributable https://www.microsoft.com/en-us/download/details.aspx?id=5555
If you are on a 64-bit system you should also install the x64 version http://www.microsoft.com/en-us/download/details.aspx?id=13523 -
The message I get is the following:
"C:\WINDOWS\SYSTEM32\WRusr.dll is either not designed to run on Windows or it contain an error. Try installing the program again using the original installation media or contact your administrator or the software vendor for support."
I can't open Mozilla firefox anymore. I have tried reinstalling 3 times already.hello, the file you have referenced appears to be part of Webroot SecureAnywhere - try to remove that software in case you have it installed on your system.
-
C:\windows\system32\d2d1.dll error. Windows 7 ultimate, can't use half of my applications.
Built a pc a while ago, ever since I installed windows 7 ultimate, a genuine copy with key. I have been getting the following
error: C:\windows\system32\d2d1.dll is either not designed to run on windows, or it contains an error.
Can anyone PLEASE help me resolve this issue, it has been driving me crazy, I can't use steam in big picture mode, use my
mouse customization software, or windows movie maker, and many more.
Or is my only option a fresh install of windows 7? Because I no longer have possession of the disc/key.
Thanks for your help.AJ
Two things to try first
Run a system file check
Please run a system file check (SFC)
All instructions are in our Wiki article below...
Should you have any questions please ask us.
System file check (SFC) Scan and Repair System Files
Wanikiya and Dyami--Team Zigzag -
C:\Windows\system32\DCIMAN32.dll Error
When I try to start dreamweaver I get a "C:\Windows\system32\DCIMAN32.dll is either not designed to run on Windows or it contains and error" message.
Hi Nomcmicken,
Can you try logging in as the admin and seeing if that changes things?
Thanks,
Preran -
Keep getting c:/windows/system32/scarddlg.dll error message
Keep getting the same error message
c:/windows/system32/scarddlg.dll is not a valid windows image
need help asapAJ
Two things to try first
Run a system file check
Please run a system file check (SFC)
All instructions are in our Wiki article below...
Should you have any questions please ask us.
System file check (SFC) Scan and Repair System Files
Wanikiya and Dyami--Team Zigzag -
when I open Firefox I have to try several times because a Runtime Error with the program C:\Windows\System32\regsvr32.exe
'''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
''(If you're not using it, switch to the Default theme.)''
* You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Don't select anything right now, just use "Continue in Safe Mode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
'''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
Please follow the [[Troubleshooting extensions and themes]] article for that.
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.'' -
Error in Writing to File \Winnt\System32\mfcans32.dll
Error window with msg "Error in Writing to File \Winnt\System32\mfcans32.dll" is being popuped while trying to install 9.0.3 on windows 2000 Advanced Server.
My System Configuration Details are as follows.
Compaq Proliant
Ram : 2GB
HARD DISK : 80GB
PROCESSOR : 2.6
Please help me to install.
Thanks,
Srinivas Chowdhary Annamareddy.You might want to investigate why it became Read-Only in the first place and are there any other files that should not be Read-Only read only.
-
Office 365 crashing on C:\Windows\SYSTEM32\D3D10Warp.dll
Hello experts,
I am having problem with one of our office laptop. The user has an office 365 installed on windows 8.1 pro 64bit. Recently the user is unable to run any of the office 365 any longer . When I looked at the Application log the following had come up :
Faulting application name: WINWORD.EXE, version: 15.0.4641.1000, time stamp: 0x53c5c244
Faulting module name: D3D10Warp.dll, version: 6.3.9600.17211, time stamp: 0x539be18f
Exception code: 0xc0000005
Fault offset: 0x0006ec1f
Faulting process id: 0x1ca0
Faulting application start time: 0x01cfe1c4934fbe00
Faulting application path: C:\Program Files\Microsoft Office 15\Root\Office15\WINWORD.EXE
Faulting module path: C:\Windows\SYSTEM32\D3D10Warp.dll
Report Id: d2c96856-4db7-11e4-830a-fcf8ae64a9eb
Faulting package full name:
Faulting package-relative application ID:
The faulting error message appears on all the 365 component. And when I check the most recent windows update the following was installed prior was installed :
KB
2998527
2990967
2989647
2975719
Has anyone got any ideas if any of the KB above may cause the issue or anyone knows of any problem with the D3D10Warp.dll.
Other troubleshooting steps done :
1) Uninstall office 365 using the fix proposed by MS - when trying to run the installer the error message come sup but it continues to install office to completion at the background
2) Running office 365 on win 8 safe boot - same problem
Short of wiping and re-installing windows which I am trying to avoid, does anyone can offer any suggestion?
Thanks in advance.I ran the the Office Config Analyzer
the only warning I get is the add-in being disabled due to performance and stability. The following were addtional add-in added
1) ProAid Writing (which has been uninstalled)
2) endnote (also has been uninstalled)
Still same issue after the add-in are removed.
Answering to your earlier questions :
1) uninstalled and reinstalled Office 365 on the computer - YES several time
2) complete
error message that came up when you run the installer - just a window saying something like ".. has stopped working" and I press the cancel button. The install continued at the background.
3) any
changes to the computer recently - only the regular updates from MS as listed above.
4) Online
Repair of Office 365 - also done but same error message and quits.
Since app log report the faulting at
C:\Windows\SYSTEM32\D3D10Warp.dll
is there a way to find out the version of this and what's the latest version or maybe reinstall the version before, this possibly came through via the updates?? -
TS1717 ITUNES.EXE - Bad Image. C:\Window\System32\Softpub.dll Problem
I have been having a problem getting into ITUNES. my computer is giving me a Message when i launch Itunes and says
ITUNES.EXE - Bad Image
C:\Windows\System32\Softpub.dll is either not designed to run on windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support.
I have tried downloading the Softpub.dll file and tried replacing it, but my computer says I am not the trusted manager (I am the Admin on this PC and dont know why I cant change it. if anyone can help that would be great. Thanks....b noir - You are awesome! I was having the "bad image" problem with the after downloading ITunes 10. I also had a problem with a DEP error (as you know - data execution protection). I tried so many things in combination to fix these problems, I am not sure which piece of your advice finally did the trick! Regarding the bad image, I renamed the file as you recommended. I tried downloading a new softpub.dll. I didn't think I was successful, but there it was right where it was supposed to be. I used the Windows Error Checking feature (right click on C Drive, properties, tools) to clean things up. Lastly, a friend recommended using a different USB port to sync for the first time. UREKA! I can now sync. Thanks for all of your suggestions, b noir!
-
Windows\system32\QUARTZ.dll can't open in Windows. Can't use Premiere Elements.
I am looking for a way to get a solution to this error which keeps preventing me from opening my Premiere Elements 11 program. I have previously used the program without any problems. But last week I had a new HDD installed in my laptop (Dell Studio XPS 1640 running Windows 7 Ultimate 64-bit). Now I can't open Premiere Elements and can't edit my videos.
When I try to open the program, I get an error which reads:
Font Capture: Adobe Premiere Elements.exe - Bad Image
C:\Windows\system32\QUARTZ.dll is either not designed to run on Windows or it contains an error. Try installing the program again using the original instalation media or contact your system administrator or the software vendor for support
My computer technician did use an image of my laptop to transfer everything onto the new HDD. I have no idea if that is relevant to this software problem.
I posted this question previously and was directed to a link which instructed me to update my DirectX and other graphics drivers. I did all that already. I still can't open Premiere Elements. I want to ask Adobe Support, but since they just launched Premiere Elements 12, I guess I no longer get direct support from Adobe? Not sure but that is how it seems to work. I will try any advice given to resolve this issue, if anyone has ideas.
Thanks!
JaneenDid you try reinstalling as indicated by the error message? Transferring images is not a good way to install Adobe programs.
-
Open Procedure for service "BITS" in DLL "C:\Windows\system32\bitsperf.dll" failed
This error is occurring on my Windows Server 2008R2 server with SQL 2008R2 installed. I have found lots of "help" but none of it works...
The Open Procedure for service "BITS" in DLL "C:\Windows\system32\bitsperf.dll" failed. Performance data for this service will not be available. The first four bytes (DWORD) of the Data section contains the error code.
The "help" I have found...
http://technet.microsoft.com/en-us/library/cc774913(WS.10).aspx
http://support.microsoft.com/kb/300956I was able to re-install BITS. The BITS error seems to have gone away, but this error is now showing...
The object length of an object returned by Extensible Counter DLL "C:\Windows\system32\wbem\wmiaprpl.dll" for the "WmiApRpl" service was not correct. The sum of the object lengths returned did not match the size of the buffer returned. The performance
data returned by the counter DLL will not be returned in the Perf Data Block. The first four bytes (DWORD) of the Data section contains the count of objects.
Help? -
Bad Image iTunes.exe c:windows/system32\d3d8thk.dll
I started to download 4.0 for iPhone and iTunes upgrade displayed, so I clicked OK. Download was successful installed no error. Clicked to open got this message:
Bad image iTunes.exe c:windows/system32\d3d8thk.dll designed not to rum on windows or it contains an error.
Uninstalled iTunes from system. New download of iTunes still get same error message.d3d8thk.dll
You're having trouble with one of your DirectX Windows operating system files there.
Perhaps the first thing we should try with that one is an sfc /scannow, as per:
[How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista or on Windows 7|http://support.microsoft.com/kb/929833]
Does the scannow find/repair any damage? If so, can you get iTunes to reinstall/launch now? -
Hello support team,
my window 7 media will not open- I tried turning feature on & off many times, I tried SFC scan, can fix the problem.
It keep saying " Wmplayer.exe bad image' 'c/windows/system32/wmp.dll ' has error ' window media player is not installed property and must be reinstall"
But I can anything on Microsoft download site that I can download. Any suggestions ?
Thank you so much for youer assistance
SAMHi,
First, I suggest you run a security program to scan your system to see if there is any virus may cause your issue.
Then, we can try to copy the wmp.dll from a good Windows 7 computer or installation media and manually replace to check the results: You'd better log into Safe mode to perform following steps.
1.Take administrative ownership of the corrupted system file. To do this, at an elevated command prompt, copy and then paste (or type) the following command, and then press ENTER:
takeown /f "C:\Windows\System32\wmp.dll"
2.Grant administrators full access to the corrupted system file. To do this, copy and paste (or type) the following command, and then press ENTER:
icacls "C:\Windows\System32\wmp.dll" /GRANT ADMINISTRATORS:F
3.Replace the corrupted system file with a known good copy of the file. To do this, copy and paste (or type) the following command, and then press ENTER:
Copy Source_File "C:\Windows\System32\"
Note The Source_File placeholder represents the path and file name of the known good copy of the file on your computer
If we still fail to fix this issue, I recommend your manually install WMP from a installation media:
I recommend you use following commands running as admin to reinstall Media player from a installation media:
Uninstall features:
Dism /online /Disable-Feature /FeatureName:WindowsMediaPlayer
Mount a wim file from installation media:
Dism /Mount-Image /ImageFile:C:\test\images\install.wim /index:1 /MountDir:C:\test\mount\windows
Install Windows Media player from mounted install.wim
Dism /Online /Enable-Feature /FeatureName:WindowsMediaPlayer /Source:C:\test\mount\windows /LimitAccess
Note: C:\test\mount\windows is the location you mount the install.wim from installation media
Kate Li
TechNet Community Support
Maybe you are looking for
-
I just loaded a bunch of music from my CD library into iTunes in the hopes of loading it onto my iPod. The problem is now I can't figure out how to do it. Two issues... First it says that if I synch it will delete what is already on my iPod which I a
-
Can I share one iTunes account for my iPad and two I phones? If so, how can I get the purchased apps and music on all three devices? How do I sync all the devices to have the same music and apps?
-
Where do I select the photos to share with my ATV?
I have updated to the latest iTunes but now can't find where to set up/manage home sharing so that I can get my ATV 'talking' to my iPhoto library on this computer. To be clear, Home Sharing is set up and working (kinda, sorta) -- for example, in iT
-
Safari 4.0.1 bounces in dock does not launch
I am running 10.5.7 all the latest updates and am on a Macbook. For some reason when I upgraded to Safari 4 the application would not launch. It started with the beta version and I have never been able to even get it to launch at all. It just bounces
-
Virtual Directory-Simple question
Hello! My application needs to access a number of files in several directories. They are mear static .PDF files.But when i call them my program is written in such a way that, it points out to the physical directory, like "C:\application\repots\myrepo