9i installation problem on a Win 2000 P4 PC

Hi,
Although I am new to Oracle, with the help of documentation I successfully managed to install it on a Window 2000 PC without any major problems except for the one described below.
The problem is this:
When the PC was part of a campus domain (e.g., claflin.edu) I got "end-of-file on communication channel" and "internal error. hostdef extension doesn't exist" errors repeatedly many times during installation but I didn't get any when the PC was taken off the network and added to a workgroup.
Is there something I need to do to make it work on a network? Has anyone seen this same behavior on Win 2000 or is it something unique in my case?
By the way, I am also running the personal web server (PWS) in the same PC.
Any help will be greatly appreciated.
Thanks
Kuha M.

Hi Eric,
Ther should not be any problem in stalling NWDS SP9. Your case the problem may be
1)Insufficient Disk Space
2)Outdated vesrion of JDK
3) you might not have been downloded full fledged NWDS SP9 installer.
4)May be while installing NWDS it is not able to locate JDK in Directory.
if you check all these, i hope it will work!!!.
Regards,
RK

Similar Messages

  • Problems with installing Win 2000 on MS6380

    Hello,
    I have a problem with installing Win 2000 SP 2 on a PC assembled with a MS 6380 (Kt 266 pro) mainboard.
    The setup starts but the system blocks just after the boot, when showing the message "Detecting Hardware configuration" .
    The configuration is the following:
    Athlon TB 800
    MS 6380
    128 MB DDR
    Matrox G200
    20 Gb Quantum Fireball CX HDD
    Intel Ethernet card 100 pro + S
    I tried to update the Bios to the latest version (1.90) and set the most conservative settings on the RAM timings. I have disabled ACPI, too.
    Could someone please help me with solving this problem?
    Thanks

    You have format the BootCamp partition during the Windows installation, since OSX can only do a preformat using FAT32 (MS-DOS) and Windows 7 needs NTFS as file system.
    See page 7 of the BootCamp Installation Guidehttp://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
    Stefan

  • Problem EP7 with Win 2000

    Hi experts,
    Almost end users portal have OS win 2000 and IE 6. When those users are logged in into ep7, the system shows the following error “EPCM is undefined”. That only happened with users in win2000 because in winXP all works fine.
    Please help me

    Hi Nelson,
    I had same problem like "EPCM  is undefined". I applied the solution given in the link above but it did not work then i found another solution for that problem.Just download the registry file in below and run it then restart your pc and try run portal again on the computers which have  problem .
    <a href="http://www.fiddlertool.com/dl/IE6SP2.reg">Download</a>
    Regards,

  • 8i PE Installation problem on P4, Win Me

    Hi!
    I am new to Oracle. I had successfully installed Oracle 8.1.5 on my P3, Win 98 machine. But now, when I tried to install the same on my P4, WinMe machine I came across a lot of problems!
    After adding the line "Jrew=0x00080000" to my WIN.INI, I was finally able to install 8.1.5. But after that, nothing works! I dont get a "Database Assistant" folder or any listener!
    So I downloaded 8.1.6, but that is not even performing the installation! I get an error "Jrew has caused an error in JAVAI.DLL. Jrew will now close. If you continue to experience problems, try restarting the computer."
    I have JDK1.3 for my Java work (and for P4). But, I guess, Oracle uses its own Java files. Any help would be greatly appreciated.
    Thanx
    Bharath

    Hi!
    I am new to Oracle. I had successfully installed Oracle 8.1.5 on
    my P3, Win 98 machine. But now, when I tried to install the same
    on my P4, WinMe machine I came across a lot of problems!
    After adding the line "Jrew=0x00080000" to my WIN.INI, I was
    finally able to install 8.1.5. But after that, nothing works! I
    dont get a "Database Assistant" folder or any listener!
    So I downloaded 8.1.6, but that is not even performing the
    installation! I get an error "Jrew has caused an error in
    JAVAI.DLL. Jrew will now close. If you continue to experience
    problems, try restarting the computer."
    I have JDK1.3 for my Java work (and for P4). But, I guess,
    Oracle uses its own Java files. Any help would be greatly
    appreciated.
    ThanKS IN ADVANCE
    RAJDEEP MANE
    [email protected]
    cell 9822133073

  • Drivers installation problems after replacing Win Xp Home Ed by Win Xp pro.

    Help needed.
    I have a Toshiba stellite M70 -SR2(purchased last December), which came with Win Xp Home Ed pre-installed on it. I remove the Home Ed and installed my XP pro Spk2. Now I can't get my wireless connection to communicate with my Linsys router so I can connect to the internet, the video card can't be installed,...
    I only managed to download and install the sound drivers and the modem drivers.
    I downloaded the Display Drivers, unzipped the file but unable to install them like I managed with the sound drivers.
    In my device manager screen I still get a yellow marke in front of:
    -Eternet Controller
    -SM Bus Controller
    -Video Controler (VGA Compatible)
    Can some one gives instructions on how to get and install these drivers or where can I find the instructions.
    Thankx

    Hi
    Well, the right installation order is very important because some drivers and utilities cannot be installed without the other drivers.
    I recommend to follow the installation instruction and to install the whole stuff.
    If you dont need something so you can remove it from the OS in Add & remove software.
    To solve the yellow question mark problem you have only to install the drivers.
    Chipset driver (at the beginning), Lan/Wlan driver, display driver.
    But if you follow the installation instruction you shouldnt get any yellow question marks.
    Regards

  • ITunes 6 installation problem on Windows 2000

    Hi Gayle,
    I read your note on Apple's discussion board ( Gayle B, "If you are experiencing installation issues...", 06:20pm Oct 12, 2005 CDT) and I followed your instructions to generate logs.
    I'm trying to install latest iTunes 6 and it gets hung forever. When I kill it, it fails with error 1628. I'm logged as Administator on this win 2000 system and I have disabled anti-virus.
    Following is test from "log.txt". I couldn't find the other log - QTPluginInstaller_XXXX.log.
    Thanks,
    Akshay
    === Verbose logging started: 10/13/2005 1:14:42 Build type: SHIP UNICODE 3.01.4000.2435 Calling process: C:\PROGRA~1\COMMON~1\INSTAL~1\Driver\11\INTEL3~1\IDriver.exe ===
    MSI (c) (C4:24) [01:14:42:156]: Cloaking enabled.
    MSI (c) (C4:24) [01:14:42:156]: Attempting to enable all disabled priveleges before calling Install on Server
    MSI (c) (C4:24) [01:14:42:156]: End dialog not enabled
    MSI (c) (C4:24) [01:14:42:156]: Original package ==>
    MSI (c) (C4:24) [01:14:42:156]: Package we're running from ==> C:\WINNT\Downloaded Installations\{13616DE2-9795-4910-8C93-80D45AF09658}\iTunes.msi
    MSI (c) (C4:24) [01:14:42:156]: Transforming table Property.
    MSI (c) (C4:24) [01:14:42:156]: APPCOMPAT: looking for appcompat database entry with ProductCode '{13616DE2-9795-4910-8C93-80D45AF09658}'.
    MSI (c) (C4:24) [01:14:42:156]: APPCOMPAT: no matching ProductCode found in database.
    MSI (c) (C4:24) [01:14:42:156]: MSCOREE not loaded loading copy from system32
    MSI (c) (C4:24) [01:14:42:156]: APPCOMPAT: looking for appcompat database entry with ProductCode '{13616DE2-9795-4910-8C93-80D45AF09658}'.
    MSI (c) (C4:24) [01:14:42:156]: APPCOMPAT: no matching ProductCode found in database.
    MSI (c) (C4:24) [01:14:42:156]: Transforms are not secure.
    MSI (c) (C4:24) [01:14:42:171]: Transforming table Property.
    MSI (c) (C4:24) [01:14:42:171]: No Command Line.
    MSI (c) (C4:24) [01:14:42:171]: Note: 1: 2262 2: Control 3: -2147287038
    MSI (c) (C4:24) [01:14:42:171]: PROPERTY CHANGE: Adding PackageCode property. Its value is '{CB1FD484-A5C5-44C0-842A-CC5B3F0278FE}'.
    MSI (c) (C4:24) [01:14:42:171]: Product Code passed to Engine.Initialize: '(none)'
    MSI (c) (C4:24) [01:14:42:171]: Product Code from property table before transforms: '{13616DE2-9795-4910-8C93-80D45AF09658}'
    MSI (c) (C4:24) [01:14:42:171]: Product Code from property table after transforms: '{13616DE2-9795-4910-8C93-80D45AF09658}'
    MSI (c) (C4:24) [01:14:42:171]: Product not registered: beginning first-time install
    MSI (c) (C4:24) [01:14:42:171]: PROPERTY CHANGE: Adding ProductState property. Its value is '-1'.
    MSI (c) (C4:24) [01:14:42:171]: Entering CMsiConfigurationManager::SetLastUsedSource.
    MSI (c) (C4:24) [01:14:42:171]: User policy value 'SearchOrder' is 'nmu'
    MSI (c) (C4:24) [01:14:42:171]: Adding new sources is allowed.
    MSI (c) (C4:24) [01:14:42:171]: PROPERTY CHANGE: Adding PackagecodeChanging property. Its value is '1'.
    MSI (c) (C4:24) [01:14:42:171]: Package name extracted from package path: 'iTunes.msi'
    MSI (c) (C4:24) [01:14:42:171]: Package to be registered: 'iTunes.msi'
    MSI (c) (C4:24) [01:14:42:171]: Note: 1: 2729
    MSI (c) (C4:24) [01:14:42:171]: Note: 1: 2729
    MSI (c) (C4:24) [01:14:42:187]: Note: 1: 2262 2: AdminProperties 3: -2147287038
    MSI (c) (C4:24) [01:14:42:187]: Machine policy value 'AlwaysInstallElevated' is 0
    MSI (c) (C4:24) [01:14:42:187]: User policy value 'AlwaysInstallElevated' is 0
    MSI (c) (C4:24) [01:14:42:187]: Running product '{13616DE2-9795-4910-8C93-80D45AF09658}' with user privileges: It's not assigned.
    MSI (c) (C4:24) [01:14:42:187]: TRANSFORMS property is now:
    MSI (c) (C4:24) [01:14:42:187]: PROPERTY CHANGE: Adding VersionDatabase property. Its value is '200'.
    MSI (c) (C4:24) [01:14:42:187]: SHELL32::SHGetFolderPath returned: C:\Documents and Settings\Administrator\Application Data
    MSI (c) (C4:24) [01:14:42:187]: SHELL32::SHGetFolderPath returned: C:\Documents and Settings\Administrator\Favorites
    MSI (c) (C4:24) [01:14:42:

    hi Akshay!
    Is there something in this log that looks fishy?
    i'm not a software engineer (kind of an installation nurse/paramedic), so i can't help you there. did you email the log to Gayle?
    love, b

  • SAP R/3 4.7 INSTALLATION ON WIN-2000 ADVANCED SERVER.

    Hello!
    IS THERE ANYONE WHO CAN HELP ME?????????
    Dear, plz. Give me the steps for sap r/3 installation on win 2000 advanced server.
    I am not having password for sap community market place.
    So, iam not able to get the steps for installation I AM HAVING THE FOLLOWING CD'S
    1) SAP 4.7 GUI
    2) JAVA
    3) SAP KERNEL
    4) ORACLE 9.2.1-  3 CD'S
    5) SAP EXPORT-  7 CD'S
    Plz. Help me in this.plz.mail me on my      ID-  [email protected]
    Thanks & regards,
    Sandeep Chaudhary
    m-09312406060
    0129-3260483,4120483

    how come you have the cds and no access to sapnet? strange....
    basically these are the steps:
    -> install win 2k server
    -> check for all hardware and software requirements (needed for sap installation)
    -> install oracle server 9.2 and the appropriate patchset (being 9.2.0.8 at the time) and the interim patches (opatch)
    -> install sap central instance using sapinst (you will be asked for the different cds such as java, kernel etc.)
    -> install sap database instnace using sapinst (you will be asked for the different cds such as java, kernel etc.)
    -> apply post-installation steps
    but: without the installation guide and the relevant sapnotes it will be difficult to succeed....get access to sapnet asap!
    GreetZ, AH

  • Oracle 10g problem on win 2000 server!!

    Hi,
    I have installed oracle 10g on win 2000 server with service pack 4 to my home machine but the problem I am facing is that when I start my db on the system my system gets slow it consumes most of the Ram.I alter few SGA parameters in init.ora file but the problem continues to be effect me.I need to get around that problem asap hope you guys help me as u did in past....
    thanks a lot...

    Hi,
    It's 128MB should i expand it? or what abt oracle 9i if i uninstall of oralce 10g.act I was earlier using oralce 9i.I would like to know that all the commands which used to support to oracle 9i will it support completly to 10g.
    thanks a lot..

  • Problem with NW04s SR2 installation with MS SQL Server 2000 SP4

    I’m struggling with the NW04s installation with MS SQL Server 2000.
    The installation stops at the step “Create/modify database schema SAPJ2EDB”.
    The following error/info from log file,
    INFO       2007-06-06 12:02:33 [iaxxgenimp.cpp:632]
               showDialog()
    Execute step doConfiguration of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|NW_MSS_SRVCFG|ind|ind|ind|ind|6|0.
    INFO       2007-06-06 12:02:35 [iaxxgenimp.cpp:632]
               showDialog()
    Execute step doTempdb of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssDowntimeConfig|ind|ind|ind|ind|7|0.
    INFO       2007-06-06 12:02:36 [iaxxgenimp.cpp:632]
               showDialog()
    Execute step doSwitch of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssDowntimeConfig|ind|ind|ind|ind|7|0.
    INFO       2007-06-06 12:02:36 [iaxxgenimp.cpp:632]
               showDialog()
    Execute step doTempDBAnalyze of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssDowntimeConfig|ind|ind|ind|ind|7|0.
    INFO       2007-06-06 12:02:37 [iaxxgenimp.cpp:632]
               showDialog()
    Execute step doTempDBBeforeRestart of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssDowntimeConfig|ind|ind|ind|ind|7|0.
    INFO       2007-06-06 12:02:38 [iaxxgenimp.cpp:632]
               showDialog()
    Execute step doRestartServer of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssDowntimeConfig|ind|ind|ind|ind|7|0.
    INFO       2007-06-06 12:02:58 [ianxbservi.cpp:697]
               CIaNtServices::stop(const map<iastring,iastring>&)
    The service 'MSSQLSERVER' stopped successfully on host 'GBCZ672C'.
    INFO       2007-06-06 12:03:10 [ianxbservi.cpp:632]
               CIaNtServices::start(const map<iastring,iastring>&)
    The service 'MSSQLSERVER' started successfully on host 'GBCZ672C'.
    INFO       2007-06-06 12:03:21 [ianxbservi.cpp:632]
               CIaNtServices::start(const map<iastring,iastring>&)
    The service 'SQLSERVERAGENT' started successfully on host 'GBCZ672C'.
    INFO       2007-06-06 12:03:21 [iaxxgenimp.cpp:632]
               showDialog()
    Execute step doTempDBAfterRestart of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssDowntimeConfig|ind|ind|ind|ind|7|0.
    INFO       2007-06-06 12:03:22 [iaxxgenimp.cpp:632]
               showDialog()
    Execute step doChangeTempSetNewSize of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssDowntimeConfig|ind|ind|ind|ind|7|0.
    INFO       2007-06-06 12:03:39 [iaxxgenimp.cpp:632]
               showDialog()
    Execute step CheckParameters of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSchemaCreate|ind|ind|ind|ind|9|0.
    INFO       2007-06-06 12:03:39 [iaxxgenimp.cpp:632]
               showDialog()
    Execute step CreateDirectories of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSchemaCreate|ind|ind|ind|ind|9|0.
    INFO       2007-06-06 12:03:40 [iaxxgenimp.cpp:632]
               showDialog()
    Execute step CreateDatabase of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSchemaCreate|ind|ind|ind|ind|9|0.
    ERROR      2007-06-06 12:03:40 [iaxxgenimp.cpp:731]
               showDialog()
    FCO-00011  The step CreateDatabase with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSchemaCreate|ind|ind|ind|ind|9|0|CreateDatabase was executed with status ERROR .
    ERROR      2007-06-06 12:03:40
               lib=iamodmssql module=CIaNtMssDmo
    MDB-05053  Errors when executing sql command: <p nr="0"/> If this message is displayed as a warning - it can be ignored. If this is an error - call your SAP support.
    INFO       2007-06-06 12:04:04 [iaxxgenimp.cpp:774]
               showDialog()
    An error occured and the user decided to retry the current step: "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSchemaCreate|ind|ind|ind|ind|9|0|CreateDatabase".
    ERROR      2007-06-06 12:04:05 [iaxxgenimp.cpp:731]
               showDialog()
    FCO-00011  The step CreateDatabase with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSchemaCreate|ind|ind|ind|ind|9|0|CreateDatabase was executed with status ERROR .
    Please let me know if you can help or if there is any other way around.
    Many Thanks in advance.
    Ritin Jain

    Hi All,
    I was not able to solve the problem with MS SQL 2000, but I was able to resolve the issue with MS SQL 2005.
    You have to chhose the following settings while instalation,
    Service Account - Select one of the following options:
    1) Use the built-in System account for each service and choose Local system or Network Service.
    2) Use a domain user account, and enter the user name and password.
    Under Start services at the end of setup make sure that SQL Server and SQL Server Agent are selected.
    Authentication Mode      
    1) Select Mixed Mode (Windows Authentication and SQL Server Authentication).
    This mode is required for a Java or ABAP+Java system.
    If you choose this mode, you have to set the password for the sa login.
    Note: The password for the sa login must comply with the Windows password policy.
    Collation Settings      
    1) Select SQL collations (used for compatibility with previous versions of SQL Server).
    2) From the drop-down list select Binary order based on code point comparison, for use with the 850 (Multilingual) Character Set.
    I hope this helps!

  • SQLSERVER7 connection problem on WIN 2000

    Hello-
    Any help at all on this problem would be greatly appreciated. I'm running MSSqlServer 7.0 Desktop Version (with service pack 3) on Win 2000 and I get the follwing error when trying to connect to the db:
    [DataDirect][SQLServer JDBC Driver]Error establishing socket. Connection refused: connect
    The DataDirect driver is loading fine. My code is fine (in fact DataDirect has their own code I can use to test their driver and I get this same exception).
    Any ideas? Is there a JDBC issue with the desktop version of SqlServer7 or is this a Win 2000 issue?
    Thanks ahead of time!
    John

    SQL Server can be configured to use named pipes, TCP/IP and a number of other protocols. Probably your server does not enable TCP/IP (all type 4 JDBC drivers for SQL Server use TCP/IP, I know this since I'm developing one -- jTDS, http://jtds.sourceforge.net).
    You can configure SQL Server to use TCP/IP using the SQL Server Network Utility. It's quite intuitive, you'll see.
    And, by the way, you can give jTDS a try. :o)
    Alin.

  • Using Mac Office connecting to win 2000 share problems with links in Excel.

    I open up an excel document from a win 2000 server using AFP and click on a link and it does not work.
    It works using a windows xp pro client and excel.
    However, the Mac excel software seems to enterpret the link differently.
    Any thoughts out there?
    ~EJXPDOCS

    I think originally Excel uses a date epoch based on January 0 1900 whereas Apple OS uses January 1 1904. There is an option in excel to use the 1904 epoch format but once saved as such you can't return to the Microsoft favoured 1900 format...
    When importing into Numbers the date epoch is automatically changed to suit Appe's preferred format (1904). This does not present any particular problem for complete imports, it only fouls up when you try copy/pasting individual dates from one type of worksheet into the other type as you are trying to do.
    I suggest you try importing complete sheets and then do the merging within Numbers.

  • Problem installing Oracle 9i database entreprise edition on win 2000 server

    Hi,
    I am trying to install the oracle 9i database 2.0(release2) on Win 2000 server and get this error message.
    "Couldn't connect to the server - Please check the network and that server daemons are running. (Socket error 10061).
    Could somebody help...........
    Thanks in advance.
    Maya

    hi,
    try to install service pack for windows 2000 and try.

  • Win 2000 Installation from Linux OS

    Hi,
    I had Linux 8 running on my system. Now I want to install Windows 2000 on one of the partitions. So anyone of u guys can plz send me the procedure to install Win 2000 from linux..??
    Rgds
    Sachin

    Enter a CD with autoboot option and choose the apprpiate
    partition without affecting Linux partitions. For some Linux OS it is imposible to be in the same disk with
    windows but there are some that accepts it.
    You have only to test it.
    Joel P�rez

  • Installation problem CCM 4.0(1)

    I install ccm 4.0(1) on my pc with wins 2000 server plus sql 2000sp3a while install I got error about RPC connection fail duration installation cisco directory.
    please help and ref
    Thank in advance

    This problem is addressed in Cisco bug ID CSCed88931

  • Oracele 9i PE Installation problem on XP

    I am using Windows XP Pro on a 1.8GHz PC, with 80G hard drive.
    I downloaded Oracle 9i, unzipping to 3 folders, and began installation of the Personal Edition.
    The first disk installed without problems. However, when directed to the folder labeled Disk 2, it could find none of the files, even though those files are clearly visible in the folder.
    The log entry is:
    Starting install install phase 1 of component Oracle Complete DSS Starter Database
    Calling action fileActions2.0.1.7.0 finalClusterSetup
         selectedNodes =
         threadsActive = 2
         vectorInitialSize = 50
         vectorFactorSize = 25
    Calling action fileActions2.0.1.7.0 copyGroupFromJar
         selectedNodes = null
         copyGroup = complete_dss
         permissions = null
         owner = null
         group = null
         copyAsText = null
         JarLoc = C:\Disk 2\/Components/oracle.rdbms.seeddb.compdss/9.0.1.0.1/1/DataFiles/complete_dss.0.0.jar
         gpEntries = [[Data_Warehouse.dfj ->%ORACLE_HOME%/assistants/dbca/templates/Data_Warehouse.dfj 293242827 plats=0=>[912,615,50,453,601,173,467,295,87,610,198,918,913,162,2,46,30,21,10021,111,90,168,888] langs=0=>[en,fr,ar,bn,pt_BR,bg,fr_CA,ca,hr,cs,da,nl,ar_EG,en_GB,et,fi,de,el,iw,hu,is,in,it,ja,ko,es,lv,lt,ms,es_MX,no,pl,pt,ro,ru,zh_CN,sk,sl,es_ES,sv,th,zh_TW,tr,uk,vi]]
         DllGroup = false
    Exception thrown from action: copyGroupFromJar
    Exception Name: FileNotFoundException_name
    Exception String: File not found C:\Disk 2\/Components/oracle.rdbms.seeddb.compdss/9.0.1.0.1/1/DataFiles/complete_dss.0.0.jar
    Exception Severity: 2
    Exception thrown from action: copyGroupFromJar
    Exception Name: FileNotFoundException_name
    Exception String: File not found C:\Disk 2\/Components/oracle.rdbms.seeddb.compdss/9.0.1.0.1/1/DataFiles/complete_dss.0.0.jar
    Exception Severity: 2
    Exception thrown from action: copyGroupFromJar
    Exception Name: FileNotFoundException_name
    Exception String: File not found C:\Disk 2\/Components/oracle.rdbms.seeddb.compdss/9.0.1.0.1/1/DataFiles/complete_dss.0.0.jar
    Exception Severity: 2
    Exception thrown from action: copyGroupFromJar
    Exception Name: FileNotFoundException_name
    Exception String: File not found C:\Disk 2\/Components/oracle.rdbms.seeddb.compdss/9.0.1.0.1/1/DataFiles/complete_dss.0.0.jar
    Exception Severity: 2
    Exception thrown from action: copyGroupFromJar
    Exception Name: FileNotFoundException_name
    Exception String: File not found C:\Disk 2\/Components/oracle.rdbms.seeddb.compdss/9.0.1.0.1/1/DataFiles/complete_dss.0.0.jar
    Exception Severity: 2
    Exception thrown from action: copyGroupFromJar
    Exception Name: FileNotFoundException_name
    Exception String: File not found C:\Disk 2\/Components/oracle.rdbms.seeddb.compdss/9.0.1.0.1/1/DataFiles/complete_dss.0.0.jar
    Exception Severity: 2
    Exception thrown from action: copyGroupFromJar
    Exception Name: FileNotFoundException_name
    Exception String: File not found C:\Disk 2\/Components/oracle.rdbms.seeddb.compdss/9.0.1.0.1/1/DataFiles/complete_dss.0.0.jar
    Exception Severity: 2
    *** Cancel Dialog: ***
    User selected: Stop installation of all products.
    File not found C:\Disk 2\/Components/oracle.rdbms.seeddb.compdss/9.0.1.0.1/1/DataFiles/complete_dss.0.0.jar
    Unable to read C:\Program Files\Oracle\Inventory/Contents/OracleHomesList.ser. Some inventory information may be lost.
    Unable to read C:\Program Files\Oracle\Inventory/Contents/LibsList.ser. Some inventory information may be lost.
    What can be going wrong here? What do I do to fix it?
    Thank you,
    Fred Corbett

    Hello,
    I'm using jdk1.5.0_09 which was installed just before I tried to install Java studio creator. I installed the version without netbeans etc.
    I was successful installing on my professional laptop, which is a Win 2000 machine but it's to full to start trying out Java Studio on. That machine has a Jkd installed one year ago.
    I checked out most of the documents on the site, noteably:
    My installation of Java Studio Creator 2 Update 1 may not have completed successfully on Windows 2000 or XP. How should I proceed?
    and
    My installation of Java Studio Creator 2 Update 1 may not have completed successfully on Windows 2000 or XP. How should I proceed?
    Ragnar

Maybe you are looking for

  • IPhone hotspot not working with MacBook air

    Hi this is my first post I think and I'm hoping for a fix to my issues. My iPhone 4S hotspot won't work when connected to my MacBook Air in either USB mode or wireless/Bluetooth. A few weeks back I had the same issue, took both iPhone and MacBook to

  • Burning cd's or mp3's

    when burning cd's or mp3's onto a blank cd make sure there are no punctuation marks in your playlist title. I just learned after a frustrating past couple of days that that was why it wouldn't burn my cd's. I have learned my lesson.. thnx for everyon

  • Web content viewer analytics

    Is it possible to single out the analytics for the content viewer only?

  • Masterdata

    Hi,    I want to know what r the master data avilable in MM & there Required Fields for preparing master data file?

  • IWeb FTP help after a server crash

    I have been using IWeb to post changes to my web page. During one of these FTP sessions, the provider's server crashed. Now when I try to publish with IWeb, I get a message that the directory path can not be found. When I use CyberDuck to FTP to the