9i Lite - JDK 1.3 is not installed on Your system

OK... so I installed J2SE SDK 1.4.0 on the system but still it won't continue to install the database. Does this only work with the JDK 1.3 or is there any other solution to this message? Do I just have to not install a repository, or won't it have any effect on this error?

I'm getting exactly the same problem.
By default I have J2SE SDK 1.4.0 on my path & classpath. As soon as I attmept to run msql I'm told:
'Unable to create JVM. You need jre/jdk 1.3.1 or higher'
Even when I change my path & classpath to point to the JDK 1.3.1 executables & jar files I still receive this error message.
Can somebody please tell me what I'm missing?
thanks
- Garry

Similar Messages

The plug-in for the selected item is not installed on your system

Hello,
When I want to build an application there is a "!" mark before the application and for the Installer, in the Project Explorer under Build Specification.
When I ask for "explain warning" I got the message "The plug-in for the selected item is not installed on your system"
Previously it worked well, whats happend?? (during my holyday's )
Thanks for help, Huub

Well, something obviously changed. Install any software and/or hardware recently? Using any hardware in your LabVIEW project? Could be the drivers for that hardware got corrupted. Try identifying what you're using and reinstall the drivers.

The description for Event ID 0 from source VSTTExecution cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

Hi,
Can any one help me on the below issue ?
while executing automated test case in test center it is showing as test case is in progress, then i navigated to virtual machine (where the test agent is online), there Internet
explore has opened automatically and my test case execution started, but with in a seconds IE has closed . However, in test center, test case status is showing as in
progress, after 2 or 3 min some of test cases getting passed and some are failed.
Here my question is in lab center-->virtual machine, IE has opened automatically and navigated the 2 or 3 links and with in seconds IE has getting closed. Why IE is getting closed without completing execution?
Error Message :
The description for Event ID 0 from source VSTTExecution cannot be found. Either the component that raises this event is not installed on your local computer or the
installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
(mtm.exe, PID 5240, Thread 4) FileAggregatorSessionInfo: Error occurred while deleting temporary directoryException: System.IO.DirectoryNotFoundException: Could not find a part of the path
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.Directory.Delete(String fullPath, String userPath, Boolean recursive, Boolean checkHost)
at Microsoft.VisualStudio.TestTools.Execution.Aggregation.FileAggregator.FileAggregatorSessionInfo.DeleteTemporaryDirectory(String temporaryDirectory)
the message resource is present but the message is not found in the string/message table
Thanks
Suresh
Suresh

Hi,
Can any one help me on the below issue ?
while executing automated test case in test center it is showing as test case is in progress, then i navigated to virtual machine (where the test agent is online), there Internet
explore has opened automatically and my test case execution started, but with in a seconds IE has closed . However, in test center, test case status is showing as in
progress, after 2 or 3 min some of test cases getting passed and some are failed.
Here my question is in lab center-->virtual machine, IE has opened automatically and navigated the 2 or 3 links and with in seconds IE has getting closed. Why IE is getting closed without completing execution?
Error Message :
The description for Event ID 0
from source VSTTExecution cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
(mtm.exe, PID 5240, Thread 4) FileAggregatorSessionInfo: Error occurred while deleting temporary directoryException: System.IO.DirectoryNotFoundException:
Could not find a part of the path
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.Directory.Delete(String fullPath, String userPath, Boolean recursive, Boolean checkHost)
at Microsoft.VisualStudio.TestTools.Execution.Aggregation.FileAggregator.FileAggregatorSessionInfo.DeleteTemporaryDirectory(String
temporaryDirectory)
the message resource is present but the message is not found in the string/message table
We are using VS 2013 (premium) and IE 10.0, scripts have been created on the same versions. It is working fine on
developers command prompt but the same tests are getting failed in lab center test agent machine
test agent log:
QTAgentService.exe, AgentService: calling AgentObject.RunEndFileCopyComplete
QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: waiting for agents to start.
QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: Agents started.
QTAgentService.exe, AgentProcessManager.PerformActionIgnoringExceptions: Successfully called 'Cleanup' on the test agent
QTAgentService.exe, AgentProcessManager.PerformActionIgnoringExceptions: Calling 'StopDataCollection(int)' on the data collection agent
QTAgentService.exe, AgentProcessManager.IsDataCollectionAgentNeeded: IsExecutedOutOfProc? True
QTAgentService.exe, AgentPro
QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: Agents started.
QTAgentService.exe, AgentService: Connection to controller is up.
Thanks
Suresh

While installing Acrobat XI Pro, the installation automatically rolls back and I get the message "The wizard was interrupted before Adobe Acrobat XI Pro (11.0.07) could be completely installed. Your system has not been modified. To complete installation a

While installing Acrobat XI Pro, the installation automatically rolls back and I get the message "The wizard was interrupted before Adobe Acrobat XI Pro (11.0.07) could be completely installed. Your system has not been modified. To complete installation at another time, please run setup again." How to resolve it.
How do I modify the system.

Hi Rgardezi,
The only reason why Acrobat installation fails and throw this error message is when there are some services running in the background causing the installer not to complete the installation. My take is try the following steps and suggest if you were able to install the products or not :
1) Navigate to control panel and confirm that there is no line Item that talks about Acrobat. If you see Acrobat XI listed there, please remove them.
2) Perform a selective Start up using the steps mentioned in this link.
Please suggest if the above mentioned steps were able to resolve the query for you or not.
Cheers,
Kartikay Sharma

The expected version of the product not installed on the system when i try ti install dec 2013 cu in sharepoint 2010

HI
in my sharepoint farm has
Language Pack for SharePoint, Project Server and Office Web Apps 2010 - Arabic العربية
Microsoft SharePoint Server 2010
installed
is any service pack 2 there for language packs for arabic as i installed service pack 2 sharepoint 2010
sucessfully
and after i go to apply dec 2013 CU it is not installed
it thrown a messege the expected version of the product not installed on the system
dec 2013 cu in sharepoint 2010
current sharepoint farm has below
adil

Hi,please find the below URL that exactly talking about the issue.
http://expertsharepoint.blogspot.de/2013/10/the-excepted-version-of-product-was-not.html
Find the detailed installation of of CUs in Post categories on blog
Anil Avula[MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/

Using Windows 8.1 with Directx11, when I lauch Photoshop Elements Organizer, I see the error message "DirectX could not be initialized. Please be sure that it is installed on your system. You can download the latest DirectX installer from:[URL] I have the

Using Windows 8.1 with Directx11, when I lauch Photoshop Elements 12 Organizer, I see the error message "DirectX could not be initialized. Please be sure that it is installed on your system. You can download the latest DirectX installer from:[URL] I have the latest version, Directx11, as verified by running dxdiag.

Maybe you need to enable Direct Play under Legacy Components in the Turn Windows Features on or off dialog.
1. Right click on the windows start Logo on the taskbar, select Control Panel and click on Programs
2. Under Programs and Features click on Turn Windows Features on or off and then under Legacy Components enable Direct Play

After Effects CC: Quicktime is not installed on this system

Trying to find a solution for this weird message "Quicktime is not installed on this system" when starting After Effects CC on OSX 10.9.3 for days now, but nothing worked out so far. Read lots of threads to this topic and followed all the different kinds of instructions (like changing the firewall settings, deleting files from the preferences folder, reinstalling quicktime7, changing the default audio devices, deleting certain components, ...), but it seems hopeless. For some reason also Media Encoder CC doesn t start. Media Encoder CS6 works just perfect, like After Effects CS6 does too. Unfortunately I do need to use the mask tracker which forces me to work with CC.
Please help! What else can I do? Need to get After Effects going very urgently.
I m working on a MacBook Air 1.7 GHz Intel Core i7 with 8GB RAM.
Thanks a lot for any reply!!! Aloha!
Julia

Troubleshooting QuickTime errors with After Effects

"The language of this installation package is not supported by your system" Error Message when installing Office 2010

Hello, I am having a very hard time attempting to install Office 2010 Pro Plus on a system. The error message that I receive is as follows:
The language of this installation package is not supported by your system.
I have tried running the Microsoft FixIt tool to remove any traces of Office 2007 and Office 2010. Also, I have followed the instructions in
KB928218 to manually uninstall any traces of Office 2007.
I believe the user had both Office 2007 and Office 2010 installed previously. There is no article to remove all traces of Office 2010.
Here is some additional output from the Setup log:
Parsing setup.xml file: F:\Access.en-us\setup.xml
Error: Installation of this product requires operating system supplemental language support. Type: 54::NoSupportedCulture.
Error: Installation of this product requires operating system supplemental language support. Type: 54::NoSupportedCulture.
Error: Installation of this product requires operating system supplemental language support. Type: 54::NoSupportedCulture.
Showing parent-less message Title: 'Setup Error', Message: 'The language of this installation package is not supported by your system.
I have tried both running setup from a disc and a network share. I am completely stumped and have been trying to get this to load for hours now. Thanks in advance for any advice!

Hi,
Thank you for contacting Excel IT Pro Discussions Services.
From your description, I understand that you encountered the following error when trying to install Office 2010:
"The language of this installation package is not supported by your system"
If there is any misunderstanding, please feel free to let me know.
Please check if this blog helps:
http://blogs.technet.com/b/jks/archive/2009/04/23/how-to-fix-the-error-the-language-of-this-installation-package-is-not-supported-by-your-system-during-office-products-installation.aspx
If anything is unclear or if there is anything I can do for you, please feel free to let me know.
Best Regards,
Sally Tang

Standard business contents are not installed in BI system

I am new to SAP Basis Team, Consultants are saying that standard business contents are not installed in BI system. What package should I install or what is the steps I should Do. Following is the content of SAINT
FINBASIS -- 600             -- 0013   -- FINBASIS 600 : Add-On Installation
PI_BASIS -- 2006_1_700   -- 0006 -- Basis Plug-In (PI_BASIS) 2006_1_700
SAP_BW -- 700                -- 0017 -- SAP NetWeaver BI 7.0
SEM-BW   -- 600               -- 0013 -- SEM-BW 600 : Add-On Installation
ST-A/PI     -- 01K_BCO700 -- 0000 -- Servicetools for other App./Netweaver 04
ST-PI        -- 2005_1_700    -- 0006 -- SAP Solution Tools Plug-In

I'm not on a 7.x system ... but on my 3.x system, the component BI_CONT is for the business content data.
Brian

Windows Media Player cannot play the file because the required video codec is not installed on your computer

I can not find solution to the issue "Windows Media Player cannot play the file because the required video codec is not installed on your computer" while attempting to play the file with *.wmv extension. Some computer fail in spite of said missing codec
being present according the windrows media player in Windows 7 box

If Rashid's link does not resolve it... consider the below:
A) As of this writing, the codec for GoToMeeting webinar recordings ("G2M4" codec) was only mentioned in *one* web page, of about 10 Microsoft web pages I read, to resolve this problem (and that codec is not included, yet, in their diagnostic tool),
so if you're trying to play a GoToMeeting webinar, simply get the codec for it from their site: http://www.GoToMeeting.com/codec
B) If Windows Media Player (WMP) will not even open the file, you won't be able to get the 4-character codec's name (like "G2M4") from WMP. But VLC's media player will tell you that code, even when it fails to run the video.... and then you can
search the internet for it.
C) The problem sometimes is not actually a missing codec. Other things that have helped others, some from:
http://answers.microsoft.com/en-us/windows/forum/windows_7-pictures/the-windows-media-player-12-could-not-play-the-wma/bb823460-44df-4e8d-ba2c-42ec0e111e5a?page=3
(1) running the System File Checker (SFC.exe),
(2) opening WMP first (running both the 32-bit and 64-bit versions) then opening the file from inside them,
(3) confirming that WMP was the file association for WMV files,
(4) Control Panel -> Hardware and Sound -> Sound, selecting my audio device, and looking for a "5.1" setting (I didn't have one), to change to "stereo",
(5) checking Tools\Options\Devices\Speakers\Properties\Speaker Properties\AdvancedPlayback\ Speakers /HP\Properties\Advanced\Default Format, to select "CD or DVD Quality" (if that setting appears for your device),
Good luck,
-- Doug
Doug Ivison

Eventlog Forwarding Issues - Either the component that raises this event is not installed on your local computer or the installation is corrupted.....

Hello all,
OK so I do have Event Forwarding working - but I've noticed that when it's first configured I get messages similar to:
The description for Event ID 104 from source Microsoft-Windows-Eventlog cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on
the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
The locale specific resource for the desired message is not present
If I alter the subscription (wecutil ss subname /cf:events) the forwarded events are rendered correctly.
However a product we are evaluating (which depends on event forwarding to work) always ends up with a couple of mal-rendered lines - always look something like:
Required Privs: %9
I built a standalone AD domain and joined the same 'problem' clients to this domain and re-configured Event Forwarding - there was no need to change the subscription format type to "events" and the events were forwarded correctly and also
the product we are looking at worked straight away.
It seems that when event forwarding is configured in our live domain (or any of the test labs we have) I always get the attached errors....
I've read a number of blogs that describe the issue and most recommend altering the subscription format - this however does not solve the issue entirely...
Has anyone else seen this issue and maybe found out how to resolve?
Thanks all
Carl

Yes,
I have ACS forwarder and OPSmgr Agent on Event log collector computer.
Event log collector computer shows some of the forwarded events incorrectly like "The
description for Event ID 104 from source Microsoft-Windows-Eventlog cannot be found"
When I change regional settings on Collector computer, event log shows all events(also previous) correctly.
Forwarded with ACS and Opsmgr Agent events
from collector computer were saved in DB correctly, even when event log show them incorrectly like "The
description for Event ID 104 from source Microsoft-Windows-Eventlog cannot be found"

After Effects CS5 Mac says "Quicktime is not installed on this system, some components...

the error message is "QuickTime is not installed on this system, some components will not work correctly."
And when I open After Effects CS5 on MacPro 2 x 2.26 GHz Quad-Core Intel Xeon with 16GB of 1066 MHz DDR3 running 10.6.3, it is basically not functionaly, because it will not open any quicktime movies without an error message.
Quicktime is installed on this mac.
I have run permissions and run diskwarrior, and it has not solved this problem.
Any ideas?

There are a few things that cause After Effects to report that QuickTime is not installed.
One is the obvious one: If QuickTime 7.x is not installed, After Effects will report that QuickTime is not installed.
The next most common reason is quite different: The TCP communication with the QuickTime server is blocked, so After Effects thinks that QuickTime isn't there at all. The fix for this to remove the blockage in communication. Sometimes the blockage is because of an aggressive firewall program, which sees the TCP communication and stops it. If this is the case, then you can either turn the firewall software off or specifically allow the QT32 Server component to communicate; instructions for letting a specific process communicate are different for each firewall program, so you'll have to look in the documentation for your security software for information about doing that. Here's a document with some more information about this general issue, though it refers to a more serious failure when the blockage happens at a different step in the After Effects startup process: http://kb2.adobe.com/cps/857/cpsid_85711.html
Another reason is that QuickTime can fail to initialize fully because it gets stuck loading a badly written importer component. If you have any AVI importers/codecs on your Mac, this could be the issue. Here's a message that goes into some detail about that: http://forums.adobe.com/message/2808379#2808379

Contract Accounts Receivable and Payable is not installed in the system

Hi ,
while i am executing EC sales list report i am getting the error as "Contract Accounts Receivable and Payable is not installed in the system".
could you please explain me what is contract accounts receivable and payable means and how to install it in the system.
Thank you.
Best regards,
Rajeswari

Typically this is installed with an Industry Solution, such as Utilities or Schools, were you have thousands of customers/accounts.
Most places probably just use the standard AP/AR functionality.
Thanks,
Tammy

The program used to create this object is AcroExch. That program is either not installed on your com

Need help fixing this. I have multiple users who use to be able to embed a pdf in word, but now are unable to. They receive the following:
The program used to create this object is AcroExch. That program is either not installed on your computer or it is not responding. To edit this object, install AcroExch or ensure that any dialog boxes in AcroExch are closed.

i found this happened too on my user.
i'm using :
1. Microsoft Office 2010 x64
2. Adobe Acrobat 10 Standard
I read some articles said that you need to disable the "Enable protection bla bla bla" which is disabled on AA 10 Standard by default.
At last it's solved after i uninstall the x64 Office 2010 and install the x86 Office 2010.
I don't know why but its works.
Hope its works to you too.
Regards,

"Quicktime not installed on this system" message when starting up AE CC 2014 for the first time...

Got a "Quicktime not installed on this system some functions disabled" -- or something to that effect -- message when starting up AE CC 2014 for the first time.
I'm on a Mac Pro OS 10.9.3.
Anyone know what I need to install to fix this? I have the Quicktime player and QT plugins for browser, etc... Never had to do anything for AE before.
Thanks!

solutions for problems with QuickTime files in After Effects CC (12.0) because of conflict with DVCPROHDVideoOutput Quic…

9i Lite - JDK 1.3 is not installed on Your system

Similar Messages

Maybe you are looking for