9i on RedHat 7.1 was successful but i can only open html pages.

If i take a blank page (index.html) and rename it to (index.jsp) I cannot open the index.jsp. Permissions are all correct and Im not sure that the problem is. Might be a problem with Jserv but I have no idea
THanks in advance
Adam

I guess i should have added that i can only open the html pages from a browser. I cannot open .jsp pages from a browser

Similar Messages

I have transferred a load of files from my PC to my iMac using the migration assistant. The message on both machines say that the process was successful bu tI can not find the files on the mac. Any ideas?

I have transferred a load of files from my PC to my iMac using the migration assistant. The message on both machines say that the process was successful but I can not find the files on the mac. Any ideas?

When you use Migration Assitant it creates another user account and puts your files there. Please log out of your normal account and log into the new account. Had you use Setup Assistant when it asked if you were migrating that would not have occured. You have a couple of options, combine the two accounts (not recommended) or start over, use Setup Assistant and have everything in one user account. Here is a link to Pondin's guide for Lion Setup Assistant tips however if you want to combine the two accounts he has addressed that in
http://pondini.org/OSX/Transfer.html

Dear support @Apple, I have tried to log in App Store with my Apple ID 3 times but never possible. I have tried to change password 2 times. It was successful.But soon after change of my password, I could not log in App store. It says always incorrect u

Dear support @Apple,
I have tried to log in App Store with my Apple ID 3 times but never possible.
I have tried to change password 2 times.
It was successful.But soon after change of my password, I could not log in App store.
It says always incorrect user name or password. But I input correct ! Because just I successfully changed my password through secret question.
Third time when I tried to change password, the page did not open!
So I checked my connection by netstat , and I trace the IP address ; 17.154.66.17 this is apple IP, but when I trace , it did not show the route. I will copy
Traceroute has started…
traceroute to 17.154.66.17 (17.154.66.17), 64 hops max, 72 byte packets
1 220.224.141.129 (220.224.141.129) 490.517 ms 64.527 ms 94.524 ms
2 115.255.239.97 (115.255.239.97) 65.157 ms 89.128 ms 89.806 ms
3 124.124.251.241 (124.124.251.241) 104.972 ms 79.051 ms 96.948 ms
4 * * *
5 62.216.147.137 (62.216.147.137) 102.266 ms 85.581 ms 88.352 ms
6 xe-0-0-0.0.pjr04.ldn001.flagtel.com (85.95.25.186) 221.939 ms 225.223 ms 236.605 ms
7 xe-11-0-0.edge5.london1.level3.net (212.187.138.53) 231.629 ms 232.045 ms 233.673 ms
8 ae-52-52.csw2.london1.level3.net (4.69.139.120) 373.798 ms 390.412 ms 383.277 ms
9 ae-57-222.ebr2.london1.level3.net (4.69.153.133) 382.653 ms 382.558 ms 376.740 ms
10 ae-43-43.ebr1.newyork1.level3.net (4.69.137.74) 405.088 ms 377.679 ms 386.527 ms
11 ae-91-91.csw4.newyork1.level3.net (4.69.134.78) 378.499 ms 389.733 ms 396.375 ms
12 ae-92-92.ebr2.newyork1.level3.net (4.69.148.45) 391.706 ms 389.605 ms
ae-82-82.ebr2.newyork1.level3.net (4.69.148.41) 381.615 ms
13 4.69.135.185 (4.69.135.185) 380.183 ms 414.398 ms 387.054 ms
14 ae-91-91.csw4.sanjose1.level3.net (4.69.153.14) 384.980 ms 381.375 ms 386.453 ms
15 ae-4-90.edge2.sanjose3.level3.net (4.69.152.209) 377.304 ms 365.457 ms 373.281 ms
16 * * *
17 * * *
18 * * *
19 * * *
20 * * *
21 * * *
22 * * *
23 * * *
24 * * *
25 * * *
26 * * *
27 * * *
28 * * *
29 * * *
30 * * *
31 * * *
32 * * *
33 * * *
34 * * *
35 * * *
36 * * *
37 * * *
38 * * *
39 * * *
40 * * *
41 * * *
42 * * *
43 * * *
44 * * *
45 * * *
46 * * *
47 * * *
48 * * *
49 * * *
50 * * *
51 * * *
52 * * *
53 * * *
54 * * *
55 * * *
56 * * *
57 * * *
58 * * *
59 * * *
60 * * *
61 * * *
62 * * *
63 * * *
64 * * *
What it means??
Please help !!
To post this question, I tried thierd time to change password, and before I tried to log in to App store, I logged in this community, and I could !
Then I could finally log in App store also.
But still I feel something is wrong with my connection.
Why the trace route does not show to the apple site ?

This is a user to user forum. Apple is not here. Apple does not answer questions here.
iTunes Support -
http://www.apple.com/support/itunes/
Mac App Store Support -
http://www.apple.com/support/mac/app-store/

After installing itunes 10 installation was successful but then tells me error 2 (windows error 2), After installing itunes 10 installation was successful but then tells me error 2 (windows error 2)

After installing itunes 10 installation was successful but then tells me error 2 (windows error 2).

Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe, and select "Extract to iTunesSetup". WinRAR will expand the contents of the file into a folder called "iTunesSetup".
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

After an unsuccessful itunes update i now get an "msvcr80.dll file is missing on my computer message. I tried reinstalling it for the microsoft site and it says it was successful but i still get the error message when i reboot. Any suggestions? Thanks

After an unsuccessful Itunes update I started getting a "msvcr80.dll file is missing from your computer" message. I downloaded and installed the Microsoft Visual C++ file and it said the reinstallation was successful but I still get the same error message and Itunes won"t install or run. Any suggestions? Thanks

Hey colorado65,
Follow the steps in this link to resolve the issue:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
When you uninstall, the items you uninstall and the order in which you do so are particularly important:
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
Let us know if following that article and uninstalling those components in that order helped the situation.
Welcome to Apple Support Communities!
All the best,
Delgadoh

I downloaded the Newest version of Adobe Air. It said the Installation was Successful but it wasn't

I downloaded the Newest version of Adobe Air. It said the Installation was Successful but everytime I try to open up a file with it, it tells me to run Adobe air again as if Im trying to download it again. Please Help!

Hi,
I am on annual leave and will be back on Nov 8th 2011.In case of any urgent ,please get in touch with your respective IT person and details given below.
For GT/MT :Mr.Manish (09004356284)& Akshay (09987712384)
For BA :Mr.Vasantha Kumar (09987631333)
For Foods/ICD :Mr.Vishal (09987937513)
Any other query please get in touch with Mr.Vijay varshney (9987631300).
Thanks
Surendran

I just tried to update my iPhone 4 and it said it was successful, but now I have a message (USB icon - arrow- iTunes icon) that is frozen? I have turned off the phone, unplugged USB and reconnected and closed out of iTunes and back in. Any suggestions?

I just tried to update my iPhone 4 and it said it was successful, but now I have a message (USB icon - arrow- iTunes icon) that is frozen? I have turned off the phone, unplugged USB and reconnected and closed out of iTunes and back in. Any suggestions?

Hello, Spedellen.
Thank you for visiting Apple Support Communities.
When experiencing issues restoring an iPhone, here are the best articles to go through. If you received a specific error number when restoring, see the section labeled Get more help in the second article below.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/ts1275
Cheers,
Jason H.

HT4623 I have an iPhone 4s and I attempted to update my device's iOS to 7.0.2. The download was successful but when I tried to install the software, it asked me to connect my device to iTunes. I did but my phone failed to load: ERROR 4013. What to do?

I have an iPhone 4s and I attempted to update my device's iOS to 7.0.2. The download was successful but when I tried to install the software, it asked me to connect my device to iTunes. I did but my phone failed to load: ERROR 4013. What to do?

Hi there KrisonCastillo,
I would recommend taking a look at the troubleshooting steps found in the article below.
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
-Griff W.

Installed Flash and it said it was successful but it doesn't work?

I installed the Flash Player and it said it was successful, but when i went to use it the page that says "you need flash to view this content" came up. So, i uninstalled the program and reinstalled it, but the same thing happened. Then I checked the preferences on safari and made sure javascript and plugins were enabled (I tried to enable java too but i couldnt find it on the preference menu). This didnt help and it still gave me the same message. Then, i went to the adobe website and they had a button that checked to see if flash was installed on your computer and when I clicked it, it said i didnt, but it was installed. I have tried pretty much everything and have read all the forums and nothing seems to be working.
The computer I have is a MacBook pro, version 10.9 and safari is version 7.
Thank you

I am suddenly experiencing incredibly bizarre Flash Player 12 problems in Windows 7 64-bit in both the Firefox 27 and IE browsers. Unfortunately, I can't seem to find a way to post the appropriate details here in a new forum topic in order to get the help I need.
Thanks for your assistance!

HT5271 I cannot watch utube videos or any film content as of yesterday. I tried to download an updated version. I was successful but that did not change anything. What can i do?

I cannot watch utube or any other video on my macbook all of a sudden. It says "blocked plug ins". I tried upgrading and was successful but that did not help. I still cannot watch videos. Help! Anyone had this problem and found a sollution?

After installing, reboot your Mac and relaunch Safari, then in Safari Preferences/Security enable ‘Allow Plugins’. Then relaunch Safari and test.
If you're getting a "blocked plug-in" error, then in System Preferences… ▹ Flash Player ▹ Advanced
click Check Now. Quit and relaunch your browser.

HT4796 I did all of the above and the migration was successful, but I don't know where the files are. It says they're under a different user, 'owner' . I tried to access via sys pref/system/users&groups, but it asks for a password for owner which I don'

Migration Assit , PC to MAC - The migration was successful, but I don't know where the files are. It says they're under a different user, 'owner' . I tried to access via sys pref/system/users&groups, but it asks for a password for owner which I don't have. What must I do to access my files?
My experience is with MS PC's I'm new with the MAC Book Pro.

Then, see if this works:
Mac OS X 10.6 Help- If you forget your administrator password
If you are running Lion or Mountain Lion you may need to do the following to access the same utility:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
When the menubar appears select Terminal from the Utilities menu. Enter resetpassword at the prompt and press RETURN. Follow instructions in the dialog window that will appear.
Or see Reset a Mac OS X 10.7 Lion Password and OS X Lion- Apple ID can be used to reset your user account password.

When I download a document, I get a message saying download was successful, but a blank screen where the document should be. What am I doing wrong?

When I download a document, I get a message saying download was successful, but a blank screen where the document should be. What am I doing wrong?
I go to an internet company and try to download a document from it. A tab pops up saying the download was successful, but all I see is a blank screen with UI at the top. I don't understand where the download is going.

Thanks so much for your reply fanboy20.
Yes, just made sure of that. I do have the latest version of Flash player. But I have just staggered upon the answer. Chalk it up to being a newbi. I was not putting my apple tv to sleep and it would not allow me to see
you tube on my computer while it was still operating on my TV. When I realized that, I put the apple tv to sleep and bingo, my computer runs you tube fine. Thanks again for your response.

HT201210 hi i did update my iphone 3gs it was successful but it says that i have no sim card in it

i did update my iphone 3gs it was successful but when it restart it doesnt know my simcard, anybody can help me

Your iPhone was hacked or jailbroken to unlock it to use it on a different network. Now that you have updated the OS it has relocked to the original carrier. Call AppleCare and give them the serial and model numbers so they can tell you who it is locked to. Then contact that carrier and see if you can get the iPhone unlocked.

Was updating Flash drive says it was successful but will not work on daily games

was updating flash drive & it said it was successful, but willnot work

To help troubleshoot we'll need the following system information:
Operating system
Browser
Flash Player version
When reporting issues with video or audio, it's also helpful to get your system hardware and driver details. Instructions for finding this information can be found here:
Windows
Mac
Finally, sometimes video and audio problems are caused at a lower level and not directly related to Flash Player. I recommend trying both of the links below to see how they perform. If the problem exists with both, then Flash Player is most likely not the culprit as the HTML5 video link does not use Flash Player when playing. You can verify the user of HTML5 by right clicking the HTML5 video and looking for the words "About HTML5" at the bottom of the context menu.
HTML5 video
Non-HTML5 video

I operate an Amway Business and use the switch share duplicate APP. Initial log in was successful but now it reads " Log in failed ( GW900751 ). This is constant upon log in attempts. Is there a way to rectify this?

I operate an Amway Business and use the switch share duplicate APP. Initial log in was successful but now it reads " Log in failed ( GW900751 ). This is constant upon log in attempts. Is there a way to rectify this?

Hi Tracy,
I don't suspect Malware yet, Id guess Disk corruption or failing Hard Drive with Files not found.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

9i on RedHat 7.1 was successful but i can only open html pages.

Similar Messages

Maybe you are looking for