9i PE won't install after unzip

So that we may better diagnose DOWNLOAD problems, please provide the following information.
- Server name
- Filename A91514-01 Oracle 9i PE for Win 98
- Date/Time 2/19/2002
- Browser + Version ME 6
- O/S + Version Win 98
- Error Msg none
After download and unzip the Setup.exe file will not run - it gives a flicker of an hourglass, then nothing.
Please help. Thanks

We worked with Oracle Support using ODC and they determined that the rwrun.jar on the two machines was different. What we had done was apply one-off patch p2938002_9022_GENERIC to the 'prod' machines and this caused our problem.
David

Similar Messages

Flash won't install after downloading...early 2013 MBP/Retina, 8GB DDR3 1600 MHz Ram, 3GHz Intel Core i7 Processor (clean installation)

Flash Player won’t install after downloading
On the first attempt to install v14, Flash Player v13 was installed and working fine.
I opened the installation package for the new Flash Player, followed standard protocol for installing Mac software and it hung before retrieving anything.
Subsequently, while watching the beach ball spin, I got an error message that the installer could not retrieve the v13 Flash Player software.
So I uninstalled Flash Player 13 and again attempted to install v14, only to see the spinning beach ball followed by a message that the installer could not retrieve the v14 Flash Player software.
I am running OS X v10.9.4 on an early 2013 MBP/Retina display with 3GHz Intel Core i7 processor and 8GB DDR3 1600 MHz Ram.
If you have any ideas or suggestions regarding my issue, please let me know.
Sincerely.
JWH

Try un-installing and then re-installing via the web site.
Adobe Flash Uninstaller
Adobe Flash Player

ITunes won't install after I click license agreement page

iTunes won't install after I click license agreement page

I had the same problem as many are having, I am running Win XP Pro and after installing the latest greatest version fresh no go, tried all the fixes mentiond around the net and no go all you get is the dam agree screen ... so I had enogh, I completly uninstalled the new version and then installed version 10 and it works fine so I think they droped the ball in the programing of the latest release thats my 2 cents. I am so glad i always keep older versions on hand because many times new versions are buggy or just do not work NOTE TO APPLE DO NOT FIX IT IF IT AINT BROKE comes to mind ... the older just work and the new junk fails don't they test the programs anymore? accross the dif supported platforms? whlth all these peole having the same problems I would say they botched the program code or installer.
It says after the install there is a newer version great after waisting all this time I will not be updating till they claime and prove they have a big prob and fix it and then test it compleatly.
Important my problem started on first installing Itunes ona newely set up XP comp so I had no settings or anything and did not care a full uninstall worked for me. Not sure with those that have tons of stuff allready in the iTunes system,
Complete working version 10.0.0.68 works fine in win XP Pro ...

Flash player won't install after Antivirus8

I had the Antivirus8 problem this week. Malwarebytes seems to have uninstalled it. I have also run Eset Online Scanner and Microsoft malicious remover tool. They all now say I'm clean. But my flash player no longer works. I have turned off my AVG 9.0 (why didn't it catch the virus!!), and have downloaded the flash uninstaller and the installer. Ran them both, rebooting inbetween. flash player seems to install, but when I go to the adobe test site i get the red x instead of the video showing that the flash player is working. Online sites that require flash player do not work either.
This all is new since the antivirus 8. I never had a problem with flash before. I am running Windows 7 Home, 64 bit, and internet explorer I also have mozilla firefox. I have tried using the both IE 32 bit and IE 64 bit, as well as firefox, and all say that flash needs to be installed.
Help please!

Thank you so much for your support,GLPCPA.
It is a good idea but some Japanese can not do system restore(have no point of system restore).
So I want another new infos on adobe F player will not install after Antivirus 8 infection.
Thank you ,GLPCPA
Have a good time.
See you again
from Japan

Grub won't install after reformat from gentoo install (error 18)

Previously I had gentoo installed with grub in the / partition in sdb2 (hd1,1). I got through the arch install after reformatting that jfs partition except grub wouldn't install because it said the "Selected Cylinder exceeds maximum supported by BIOS". I didn't change any partitioning so I don't understand how that would be possible.
I ran fdisk to fix the partition order, but it didn't have anything to fix. Another oddity is that when I try to boot up, I get a grub command prompt with no errors, and that mapping is different (sdb is hd0). I can't really change my partitions, because sdb1 is a 1.5+ tb partition and I don't have room to backup the data.

Well I found a workaround for my problem. It's not ideal, but I installed grub to sdb1, which is a home partition instead of sdb2 (my /).

Firefox won't install after downloading.

I recently was having troubles with Firefox, I was running Firefox Beta 18 - it started saying it could not update. So after repeat failed attempts, I figured I'd uninstall it and re-install a fresh version. It will download, I can find the file folder, but even when I try to run it as an administrator it won't open the installer. I downloaded three different versions, all do the same. I'm currently running Windows 8 and have had Firefox for over two years on Windows 7. When I upgraded to Windows 8 it transferred seamlessly with no problems. I'd like to be able to use Firefox again.

You can try booting the computer in Safe Mode with Network Support. This can be done by opening msconfig.
# Enter Desktop mode by pressing Windows Logo + D
# Windows Logo + R
# Type ''msconfig'' and press Enter
# Click on the ''Boot'' tab and choose Safe Mode with Network
# Click Apply/OK
Then restart your computer and it should automatically enter Safe Mode with Network Support. From there, find your installer and try running it again. When it's done, make sure to go back to msconfig and uncheck Safe Mode.
Finally, restart the computer.
Hope this helps!

10.4.11 won't install after download "disk does not meet requirements"

After successfully upgrading to 10.4.6, I was able to download (after three attempts) the upgrade to 10.4.11. When I went to install it, it said the volume I picked (the one the OS is on and just upgraded to Tiger) did not meet the requirements and had the red exclaimation point on it, as did all the other volumes. There is about 8.5 GB of free space on this volume. The upgrade was from the support website and was for the power PC, not the intel. What could be happening?

Hi BDAqua,
This is the only discussion that repeats the "disk does not meet requirements" message I'm getting. I downloaded the combo and get that message. These are my specs:
Machine Name: Power Mac G5
Machine Model: PowerMac7,2
CPU Type: PowerPC 970 (2.2)
Number Of CPUs: 1
CPU Speed: 1.8 GHz
L2 Cache (per CPU): 512 KB
Memory: 3 GB
Bus Speed: 900 MHz
But I can't seem to find any requirements documentation that explains why my PowerPC won't take this upgrade. It's my son's computer and one of his favorite games just raised its req's to 10.4.6. So I went hunting (software update gave me nothing) and found the combo. Any advice appreciated.

Flash player won't install after closing Firefox.

Flash player install is frozen half way through with message to close the following programs: Mozilla Firefox.
After closing browser, it won't continue.

What is your operating system?

Itunes won't install after deleting it

updated to 11.2.0 and didn't recognize my phone or ipod. deleted itunes and all the software updaters. tried to reinstall it and now it won't even run the install on my computer once i download it

Hello skozel,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning iTunes for Windows installation issues:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

OS X Mavericks won't install after erasing Mac Hardrive for reboot

So I decided to reboot my computing and now the new OS X software won't install

If you do have an iMac, Late 2012, restart the iMac holding the Command+Option+R keys so you boot from the Apple internet servers, you must be on the internet to do that. You can then choose Install Mac OS X and reinstall your operating system. Then proceed to go to the Mac App Store and download and install Mavericks.

E51 Driver won't install after XP reinstall

I have been using my E51 with PC Suite 6.86.9.3 on XPSP2 for several months and all was fine. I had need to reinstall XP using the "Upgrade" option - i.e. keeping all your applications and settings.
After the reinstall, the E51 will not load. It says:
"Nokia E51 USB Phone Parent - An error occurred during the installation of this device - Fatal error duing installation"
I have, of course, removed all the drivers by hand (wdfcoinstaller01005.dll nmwcdcocls.dll, ccdcmd.sys etc), cleaned the registry, rebooted, uninstalled and reinstalled PC Suite, located the correct inf file (oem31.inf in my case), tried automatic driver install, manual driver install etc etc and after several hours work trying various combinations of the above, still the same message whenever I update the driver for the phone.
Has anyone had this before? I don't want to do a clean install of XP and reinstall all my apps, but I might have to.

Fixed - this message helps!
/discussions/board/message?board.id=connectivity&thread.id=16751
Thanks to freespirit62 and USB Phone Parent error.

Zen W Software CD Won't Install after add & remove?

August 09 2009 Hello Creative Guys: I have a Zen W unit and I think firmware version .0., I'm running Windows XP SP3 but last week my Zen W stop communicating with my Window XP, what I tired first was using add/remove from control panel and doing a repair of software but that did not work, next I uninstalled all software that was installed from my CD Rom that can with my Zen W unit and reinstall from CD Rom again and that is when I ran into some problems listed below, can you please tell me how to fix those two errors. Installation is unable to continue one or more unresolved issues. Please contact support service and quote error I-00. Do install fails to launch D:\ctshared\ctplugin\vidconv\setup.inx.doinstall return error code is 2472332. These two errors come up about 6 times during install of CD Rom software from my Zen W unit, it does finish installing program but after reboot it does not show Zen icon on right side of tas bar. I'm using my Zen W unit only at home and I don?t have internet so no virus of any kind but I did run a virus scan on my computer but it can up all clean. Any Ideas on what is going onThank You for all your help

Have you met the requirements for a successful install:
You (who will be Hotsyncing) are the ONLY person logged onto the computer.
You have Windows Admin priveleges and are NOT logged on as Administrator.
ALL other applications are OFF, especially firewall and antivirus.
Do NOT plug the device into the hotsync cable until the install is completed and you are asked to sync.
Never, ever use Switch User; always Log On and Log Off.
Post relates to: Palm TX

Compressor doesn't work/won't install after FCP5 install

We recently "upgraded" one of the G5s in our lab to Final Cut Pro 5 from FCP HD 4.5 (these were both Academic versions if that matters, so it's not really an upgrade, you buy a new license at academic pricing). I don't remember which we did first, but we also upgraded this machine to Tiger at the same time.
The guy that does most of the video work on this machine reported to me that compressor wasn't working. That it would launch and crash, and sure enough it does. So I did some investigating, and the version of Compressor that appears to be installed on the system is 1.2.1, but doesn't Compressor 2 come with Final Cut Pro 5 (or is it just Studio)? I tried to reinstall from the disk and and on the install screen where it lists the packages to install (the 'Custom Install on "Macintosh HD"' screen), Compressor shows up as unchecked, greyed out and with "Skip" in the Action column. I've even tried removing Compressor from the Applications folder and that doesn't seem to make a difference. Is there any way for me to force the installer to install the version of Compressor on the Final Cut Pro 5 disk?
Something seems to be messed up. Any help would be greatly appreciated. Thanks!
PowerMac G5 Mac OS X (10.4.3)

OK, it took some fiddling, but I got Compressor to install correctly. First I tried the instructions Apple has here:
http://docs.info.apple.com/article.html?artnum=93234
but that didn't help.
So then I found this page with a brief article on "Tricks to install Compressor 2 on G3 Mac":
http://www.xlr8yourmac.com/archives/jun05/060305.html
Not very descriptive, but I basically had to make a local copy of the Compressor package from the Final Cut Pro Install disk, then go in and remove the InstallerCheck and VolumeCheck files and then manually install that package by itself.
I did a reinstall of FCP5 from the disk for good measure after that, and then a software update. It still says "Skip" for Compressor vs. "Update" for everything else when you are in the FCP installer. Everything seems to be working fine now though.
This seems like a serious problem in Apple's Final Cut Pro 5 installation package (at least for the academic version and whatever sequence of steps got us into this state).

OS won't install after restoring to factory settings

I restored my HP DV5 laptop to original factory settings. Once the restoration was complete, the computer restarted, but every time it boots back up and begins to install windows, a window pops up stating that an error was encountered during installation. I click on "ok" and the whole problem repeats. This is actually the second time I have restored the factory settings because after the first time, the screen would randomly go black and whatever program I was in would stop functioning ( the computer would still be on though). I have run a primary hard disk drive and memory test. Both have passed with no errors.
This question was solved.
View Solution.

A few links to read
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01612373&tmp_task=solveCategory&cc=us&dlc=en&la...
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01611761&tmp_task=solveCategory&cc=us&dlc=en&la...
http://h10025.www1.hp.com/ewfrf/wc/documentSubCategory?tmp_rule=48356&tmp_task=solveCategory&cc=us&d...

Programs won't install after Leopard Upgrade

I did an upgrade install of Leopard from Panther. It went very smoothly with no problems. However, when I tried to install my new copy of iLife '08, the installer hung on "starting installation" progress bar after I clicked the Install button. I never got to the "Installing" part of the process. I had to Force Quit it after a while.
I tried installing several other non-iLife application packages and they hang at the same place. It seems like the Apple Installer has been corrupted, but I have no idea how to begin fixing it. Can anyone help?

I've been having problems running installer packages since putting Leopard on my G5. I'll click thru the installer windows to the point where the Install button shows up. When I click that, all I get is a spinning beachball. No error message, tho-- it just hangs, so I have to Force Quit it. This has happened with Flip4Mac and Logitech Control Center, and maybe others I'm forgetting. Not to every app I've tried to install. But it HAS happened with the X.5.1 Update! And I'm having a devil of a time getting any relevant info about the problem.

9i PE won't install after unzip

Similar Messages

Maybe you are looking for