9i report won't die after completing successfully

We are running 9iAS 9.0.2.2 and 9iDB 9.2.0.3, all machines are Linux RedHat Linux.
We have a development 9iAS server whose reports run and cleanup successfully off the 9iDB, and we have 3x9iAS production servers (when we go live) that run reports but they do NOT cleanup successfully. That is, both the main report process and the 9i DBMS_DEBUG / DBMS_PIPE special process persist in the 9iDB after the run has finished.
Does anyone know why one 9iAS report request cleans up and the other 9iAS report request does not clean up. This is a 100% repeatable activity.
Is there some hand-shaking between the 9iAS and 9iDB that could be different between the two 9iAS boxes?
Where would I look to find them? I am not a server techie, I need help on this.
I need an answer in 24 hours please.
David Martin
[email protected]
+61 2 6243 8777
+61 4 0335 0524

We worked with Oracle Support using ODC and they determined that the rwrun.jar on the two machines was different. What we had done was apply one-off patch p2938002_9022_GENERIC to the 'prod' machines and this caused our problem.
David

Similar Messages

  • How to re-activate 'Mail' after complete successful Time machine re-installation except 'Mail' backup keeps getting stuck?

    How to re-activate 'Mail' after complete successful Time machine re-installation except 'Mail' backup keeps getting stuck?

    Trying to re-instal my email history the 'Mail Message Import' dialogue screen says: 'Mail needs to import your messages. This might take a few minutes. You won't be able to use Mail until the import is finished'.
    The problem is: after importing 5,000 messages it stops and the 'Time remaining' only keeps adding up to many hours (17 hours). There are almost 80,000 email messages in my Time machine backup.
    How to get this working? I am even prepared to give up my email history if i can only get my 'Mail' application working again.

  • Scheduling of Concurrent Program stops after completed successful.

    Hi
    I need to create a check or procedure to create a alarm, which helps in checking the scheduling of all those concurrent programs whose scheduling has been stopped after completing successful. There has been lot of occurrences in our environment that led to programs not running for next run.
    Aviral

    If you have a trace, then just post the tkprof output here (put the tag before and after it).
    Hopefully you've traced the session with WAIT EVENTS, so we can see where much time is being spent.
    If not, I suggest you first trace the session again with WAIT EVENTS.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • Blank Screen of Windows 7 after complete successful installation

    I installed Windows 7 on my latest iMac using the SD card method without a hitch.
    After installing the bootcamp drivers via windows the mac restarted to complete the installation but after the initial white boot up screen, the screen remains black.
    I had previously installed parallels and started experiencing this problem after uninstalling it. So I decided to do a fresh install of Windows 7 but the problem still remains.
    Kindly help me out in this regard.
    Thank you.

    Me too - just sits there - no signs of life. No solutions I've found in the forums either

  • Flash player won't work after a successful download

    About my Mac:
    OS X version 10.8.4
    1.3 GHz
    Safari: version 6.0.5
    I have installed and unistalled flash player several times, and even restarted my computer. I followed all the steps to do so correctly, but the Flash Player won't work at all. Youtube and other websites give me error messages when I try to watch a video. They say "missing plug-in".
    I really can't seem to find the problem.
    (For what this info is worth: I just got my computer a couple days ago)

    How to perform a "clean install" of Flash Player in Mac OS X
    Give that a shot.

  • I downloaded the Flash player on Mac, but won't work after downloading successfully

    I don't know what to do because I have been trying to download the Flash Player and it says download successful and everything. But when I go to a certain site or watcha certain video, it says I need to download the Flash Player. What should I do?

    See if anything in here helps http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-mac.html

  • I tried to update my sons iPad and now it won't turn on or off just a picture of a cable and I tunes symbol. Can it be fixed or is it broken I've seen posts saying their iPads died after doing updates.

    I tried to update my sons iPad now it won't turn on or off it shows a cable and iTunes symbol tried holding down sleep button & screen button but no luck does this mean it's Broken I've seen posts saying their iPad died after doing updates.

    It's not broken, it just means that the iPad has gone into recovery mode : http://support.apple.com/kb/ht1808
    You will need to connect the iPad, via its cable, to a computer's iTunes (you will need an up-to-date version of iTunes installed on the computer), and you should then be able to reset the iPad and restore/resync the content to it.

  • I have a MAC Pro from 2011 currently running MAC OS 10.9.5.  This weekend I cloned the MAC HD drive to a new SSD drive for improved performance.  The clone was completed successfully with no errors.  After the clone completed I successfull restarted my sy

    I have a MAC Pro from 2011 currently running MAC OS 10.9.5.  This weekend I cloned the MAC HD drive to a new SSD drive for improved performance.  The clone was completed successfully with no errors.  After the clone completed I successfully restarted my system using the SSD as the boot device.  I then successfully tested all of my products, including Photoshop CS6 and all of its plug-ins.  I successfully tested the key features that I frequently use.  Today while attempting to launch Photoshop CS6 a message is being displayed indicating that a scratch disk cannot be found.  All drives are available on the system via the Finder and Disk Utility.  I can access all drives including the old MAC HD which is no longer the boot device.  I've even attempted to launch Photoshop from the old device yet the same error persist.  Is there a way to review/edit/change Photoshop preferences if Photoshop doesn't launch?  I've even restarted my system several times to see if that would resolve the issues.  Does anyone have any recommendations for this issue?  Have you previously address this issue? 
    Thank you Gregg Williams

    Boilerplate text:
    Reset Preferences
    http://forums.adobe.com/thread/375776
    1) Close the program and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (not reversible)
    or
    2) Move the Folder. See:
    http://www.bugge.com/Family-and-friends/Illy/illy.html
    --OB

  • My 4th gen Shuffle just up and died after 2.5 years.  It won't charge when attached to my Mac.  Can I replace a battery or do I have to buy a new one?

    My 4th gen Shuffle just up and died after 2.5 years.  It won't charge when attached to my Mac.  Can I replace a battery or do I have to buy a new one?

    Hi Soldier7439,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Do you have the power adapter to plug into an electrical outlet?
    Apple - Support - iPod - iPod nano (4th generation) Troubleshooting
    http://www.apple.com/support/ipod/five_rs/nano4gen/#
    Apple - Support - iPod nano
    http://www.apple.com/support/ipodnano/
    Cheers,
    - Judy

  • Apple tv completely died after update

    apple tv completely died after update, not even light on. its brand new.

    Take it back and get another.

  • Session completed successfully with errors reported in error tables.

    Which table would contain the errors for this error message?
    "Session completed successfully with errors reported in error tables."
    The Snp_Exp_Txt table?
    Edited by: user8702914 on Mar 2, 2011 11:28 AM

    Sutirtha,
    The FLOW_CONTROL option must be set to 'Yes', as it is the CKM that creates and populates the E$ table. If it was set to 'No' there would not be any 'errors reported in error table' as the error table would not exist.
    Cheers
    Bos

  • My ipod shuffle won't charge after not being charged for a month... did the battery officially died?

    my ipod shuffle won't charge after not being charged for a month... did the battery officially die?

    maybe you can control the room temperature.... i try to charge iPod shuffle beside the mini fan, so heat from shuffle can blown away... or maybe, you can charge the iPod in Air Conditioned room....
    i think this device have a mechanism to cut off the charging process if device temperature too hot. such a safety system so this ipod won't burn out when overcharging.
    i hope it can help you...
    and trust me IT WORKS....

  • My IMAC seems to have died after power surge. It shut down and won't start.  What shall I do?

    my IMAC seems to have died after power surge. It shut down and won't start.  What shall I do?

    I would recommend you try an SMC reset at this point:
    Resetting the System Management Controller (SMC)
    Resetting the SMC for Mac Pro, Intel-based iMac, Intel-based Mac mini, or Intel-based Xserve
    Shut down the computer.
    Unplug the computer's power cord.
    Wait fifteen seconds.
    Attach the computer's power cord.
    Wait five seconds, then press the power button to turn on the computer.
    If that fails to solve it, it is probable that the power surge damaged some of your iMac's hardware components, and will need to be repaired at an Apple Authorized Service Center.

  • Photoshop CS6 won't launch after successful installing the upgrade on my PC

    After a successful installation process, Photoshop CS6 opens, starts to load, then vanishes....   I'm on a PC where I'd been running CS5, then upgraded to CS6 via internet. Had problems with installation setup, which were settled via Adobe Chat. Now the programme starts up ready to open but shortly after the PS sign comes up and before the window actually opens, just disapears. Can anybody help with this please?

    Ok, I found one more article talking about upgrading to 11.3 upgrade instead of 11.4(latest). Finaly worked. Hope this helps someone else, this was painful.

  • MacBook Pro won't start after I completed my first backup using TimeMachine

    Hello,
    My MacBook Pro won't restart after I did my first TimeMachine backup.  I tried in SafeMode but no luck.  My MacBook Pro is a 2009 early version running Snow Leopard.  Please help.
    Thanks,
    Serey

    I have managed to get into my computer through the OS X install disk but now my wi fi hardware is gone. Ie no airport.
    When I try to re install the airport extreme wi fi base station software  it tells me it can't be installed as this version of Mac OS X (Lion) on is volume is not supported.
    Not even an Ethernet cable gets me on line. In system preferences when I do a network diagnostic all I get is the spinning disk. Again, any ideas how to get around this?
    Thanks

Maybe you are looking for