9i's Oracle Universal Installer problem in W2K server! Please Help.

Hi all,
I am trying to install Oracle database 9i on my w2k server (domain controller). The Oracle Universal Installer quits right after I choose install in autorun menu with this message:
'Error in writing to directory C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\OraInstall. Please ensure that this directory is writable and has at least 25 MB of Disk Space. Installation could not continue.'
I am installing as the administrator of the domain/server and I have 17GB left on my harddisk. I am using a P3 600 with 384 MB of RAM. My HD is Seagate ATAIV Baracuda and my motherboard uses VIA chipset.
Thanks in advance for your help.
Regards,
Hartono

I am using Diamond TNT2 video card. I have tried to install new (not newest) detonator drive and VIA 4 in 1 driver ver4.29 but it still gives me the error. Would it help if I install Java2 runtime on this computer?
Regards,
Ari

Similar Messages

Oracle 11gR2 installation problem on Windows Server 2008 R2 datacenter

Hi
I am trying to install Oracle 11Gr2 64 bit on Windows server 2008 R2.The system configuration is "Intel Xeon, RAM 8.00 GB.
i
The installation is getting paused at the 8th step of Oracle installation.Neither i am getting any error message nor an entry is recorded in the Oracle inventory log.
It is showing a blank screen after the prerequiste checks are complete.
Request you to help me out in resolving the issue.
Thanks in advance for your cooperation.

Hi Helios
Thanks for the response. The database is still not created to check in the Alert log .It is still in the phase of pre-requisite checks. I did not go with Silent installation.It is a plain single instance installation.
The installation screen is greyed out with out any message or error.
Please could you share if you have any thoughts on this.

OUI - Oracle Universal Installer problem and questions

Hi.
I have Oracle9i Release 9.2.0.6.0 installed on my pc, its connecting to Oracle on a AIX server. I am trying to installed the odbc drivers I have downloaded from the oracle website.
Odbc - 9.2.0.6 , but when running the installer it is version 2,2 and says i need 2.3 .
I dont see anywhere to download the newer version of the installer?
And how do I run the installer - where is it located on my machine?
thanks
in
advanc e

If u have metalink access then try there.
I know that latest OUI ver is 2.2.0.18. This patch is available in metalink or from download.oracle.com

Critical problem with directory server--please help!

We are having issues with some applications and the root cause seems to be the directory server. We see the following errors in the directory server log.
[03/Oct/2008:11:58:25 -0600] - DEBUG - conn=-1 op=-1 msgId=-1 - PR_SetSocketOption(PR_SockOpt_NoDelay) failed, error -5962 (The value requested is too large to be stored in the data buffer provided.)
some other stuff in the log file:
[03/Oct/2008:11:48:25 -0600] - DEBUG - conn=-1 op=-1 msgId=-1 - PR_SetSocketOption(PR_SockOpt_NoDelay) failed, error -5962 (The value requested is too large to be stored in the data buffer provided.)
[03/Oct/2008:11:50:26 -0600] - WARNING<20805> - Backend Database - conn=2361383 op=1 msgId=2 - search is not indexed
[03/Oct/2008:11:50:27 -0600] - WARNING<20805> - Backend Database - conn=2361384 op=1 msgId=2 - search is not indexed
[03/Oct/2008:11:50:28 -0600] - WARNING<20805> - Backend Database - conn=2361385 op=1 msgId=2 - search is not indexed
[03/Oct/2008:11:53:25 -0600] - DEBUG - conn=-1 op=-1 msgId=-1 - PR_SetSocketOption(PR_SockOpt_NoDelay) failed, error -5962 (The value requested is too large to be stored in the data buffer provided.)
[03/Oct/2008:11:57:27 -0600] - WARNING<20805> - Backend Database - conn=2197806 op=82101 msgId=686205 - search is not indexed
[03/Oct/2008:11:57:57 -0600] - ERROR<5897> - Schema - conn=-1 op=-1 msgId=-1 - User error: Entry "uid=s0224025,ou=People,dc=lethbridgecollege,dc=ab,dc=ca", attribute "pabURI" is not allowed
[03/Oct/2008:11:58:25 -0600] - DEBUG - conn=-1 op=-1 msgId=-1 - PR_SetSocketOption(PR_SockOpt_NoDelay) failed, error -5962 (The value requested is too large to be stored in the data buffer provided.)
[03/Oct/2008:12:03:25 -0600] - DEBUG - conn=-1 op=-1 msgId=-1 - PR_SetSocketOption(PR_SockOpt_NoDelay) failed, error -5962 (The value requested is too large to be stored in the data buffer provided.)
top shows the following: but cpu many times maxes out and runs 100%. Do i need to perform some indexing somewhere or is there other issues?
load averages: 3.04, 3.15, 3.55 12:11:26
224 processes: 222 sleeping, 1 running, 1 on cpu
CPU states: 37.7% idle, 40.2% user, 22.1% kernel, 0.0% iowait, 0.0% swap
Memory: 2048M real, 36M free, 2429M swap in use, 2979M swap free
PID USERNAME LWP PRI NICE SIZE RES STATE TIME CPU COMMAND
10828 mwadmin 129 59 0 0K 0K run 148.1H 24.83% ns-slapd
9466 mwadmin 70 59 0 151M 65M sleep 743:06 1.98% ns-httpd
10738 root 1 59 0 4240K 1032K sleep 34.3H 1.73% top
26298 root 1 0 0 4096K 1696K cpu 0:00 1.51% top
5759 root 9 59 0 14M 96K sleep 851:54 0.77% cctransport
13378 ward 1 59 0 0K 0K sleep 1:23 0.57% prstat
25284 root 1 59 0 68M 27M sleep 561:22 0.50% mixer_applet2
10005 mwadmin 1 59 0 68M 27M sleep 604:43 0.49% mixer_applet2
10003 mwadmin 1 59 0 69M 2600K sleep 306:12 0.25% gnome-netstatus
25282 root 1 59 0 69M 2664K sleep 274:36 0.23% gnome-netstatus
9881 mwadmin 1 59 0 17M 11M sleep 241:04 0.21% Xvnc
9896 root 1 59 0 17M 6856K sleep 245:53 0.19% Xvnc
9911 root 1 59 0 15M 5512K sleep 159:38 0.13% gconfd-2
9901 mwadmin 1 59 0 15M 5576K sleep 157:18 0.13% gconfd-2
7962 mwadmin 45 59 0 0K 0K sleep 749:45 0.10% ns-slapd
any advice would be great.
Darren

Darren,
For this error:
[03/Oct/2008:11:58:25 -0600] - DEBUG - conn=-1 op=-1 msgId=-1 - PR_SetSocketOption(PR_SockOpt_NoDelay) failed, error -5962 (The value requested is too large to be stored in the data buffer provided.)
some other stuff in the log file:
[03/Oct/2008:11:48:25 -0600] - DEBUG - conn=-1 op=-1 msgId=-1 - PR_SetSocketOption(PR_SockOpt_NoDelay) failed, error -5962 (The value requested is too large to be stored in the data buffer provided.)
Solution/Notes:_
The below errors are "informational" in nature.
This is not an issue with the directory server, but with a connection to the directory server and whatever(device,script, or application) is attempting this connection.
These informational errors you are seeing in the logs are typically related to incoming connections from a load balancer or switch.
It is usually some device,script or application doing monitoring of the LDAP server,port or connection.
It is found that one of the biggest culprits to be the Cisco Content Switch or load balancer.
Generally the cause of this error is a "sticky bit" setting within the Cisco Content Services Switch that is causing these errors.
These load balancers periodically ping the servers (every five seconds) to verify that they are alive.
After turning off the "sticky bit" setting, which disables the ping to the server every 5 seconds, the errors will no longer show up.
The best course of action is to find the client doing this kind of monitoring and change it's behavior.You can look at the directory server's access log for B1 errors (the same client causing the PR accept errors in the errors log will cause B1 errors in the access log) at the same time you see these errors in the errors log. Then back track the connection in the access log to find the connectiing IP address of the clienton the first BIND.
If you can not determine the client causing these errors and are concerned about your errors logs filling up then you can either turn off this error logging.
This can be done dynamically on the server with a ldapmodify command:
cd /install-root/shared/bin or cd /var/opt/mps/serverroot/shared/bin
./ldapmodify -p port -h hostname -D "cn=Directory Manager" -w password
dn: cn=config
changetype: modify
replace: nsslapd-infolog-area
nsslapd-infolog-area: 0
If you don't want to do that then you can try and modify this attribute.
"nsslapd-nagle
When the value of this attribute is off, the TCP_NODELAY option is set so that LDAP responses
(such as entries or result messages) are sent back to a client immediately.
When the attribute is turned on, default TCP behavior applies.
That is, the sending of data is delayed, in the hope that this will enable additional data to be grouped into
one packet of the underlying network MTU size (typically 1500 bytes for Ethernet)."
This will require you to stop and restart the server.
NOTE: Below is the suggested fix, however, please apply this at your own discretion as this may or may not fix the issue. It depends on the client making these connections.
1. Stop the directory server
2. Edit the dse.ldif configuration file
3. In the "cn=config
" entry, add the attribute "nsslapd-nagle" with a value of "on".
4. Start the directory server.

Oracle Universal Installer cannot be run... getting this error due to Java path. Pleath help.

Hi Experts,
Trying to Deinstall the OBIEE 11g. OUI is not launching... after digging the issue find out that "Java RunTime Environment was not found".
But Java software is available at the specified path.
"C:\DOCUME~1\user\LOCALS~1\Temp\OraInstall2013-09-05_01-10-08PM\jre\bin\javaw.exe"
Can you please help me on this... The complete error is...
Oracle Universal Installer
The Java RunTime Environment was not found at C:\DOCUME~1\v859971\LOCALS~1\Temp\OraInstall2013-09-05_01-10-08PM\jre\bin\javaw.exe. Hence, the Oracle Universal Installer cannot be run.
Please visit http://www.javasoft.com and install JRE version 1.3.1 or higher and try again.
OK
Arjun

Hi Srini,
I have tried as you mentioned like installing Java in C:\Java... and I have tried the by setting the JRE_LOCATION of local path. No use of it.
tried with -jreloc and setting the java path in environment variables too.
As I understand, the problem i have seen at files copied path is not expected as required. Please see the path below...
C:\DOCUME~1\v859971\LOCALS~1\Temp\OraInstall2013-09-06_03-36-31PM\jre\bin\javaw.exe.
After running the Setup.exe -deinstall... temporary folder is creating with timestamp and all the required files are coping here...
"jre" folder also created and copied required java files directly into jre folder, but not in jre\bin folder.
folder path is like this
C:\DOCUME~1\v859971\LOCALS~1\Temp\OraInstall2013-09-06_03-36-31PM\jre\javaw.exe.
Setup application is expecting jre\bin\javaw.exe, but folder structure is created as jre\javaw.exe. There it is coming the issue.
I have even tried with copying all the files into bin folder and executed the setup.exe, it again creating a new temporary file
not able to resolve it...

Oracle Universal Installer not starting, failing on pre-requisites

--[This is where the application server 10g Forms and Reports (9.0.4) cd resides for Solaris version 5.9]
/data02/FMSinvoice/appsFR904/INSTALL/SOLARIS
--[The runInstaller is using oraparam.ini from the following temp location (/data02/FMSinvoice/appsFR904...). This is a patch which allows above cd to run on Soalris ver 5.10]
bash-3.2$ runInstaller -paramFile /data02/FMSinvoice/appsFR904/INSTALL/ForSolaris5_10/4494701/oraparam.ini
Debug1
encoding = UTF-8
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 5.8, 5.9 or 5.10. Actual 5.10
Passed
Checking operating system packages: SUNWarc,SUNWbtool,SUNWhea,SUNWlibm,SUNWlibms,SUNWsprot,SUNWtoo,SUNWi1of,SUNWxwfnt,SUNWi1cs,SUNWi15cs Passed
Checking swap space: must be greater than 1536 MB. Actual 14791MB Passed
Checking Temp space: must be greater than 150 MB. Actual 12596 MB Passed
All installer requirements met.
Checking if CPU speed is above 250 MHz. Actual 1200 MHz Passed
Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-08-29_03-54-34PM. Please wait ...sh: /apps/oracle/product/9.2.0/oui/bin/unzip: not found
Error in writing to directory /tmp/OraInstall2012-08-29_03-54-34PM. Please ensure that this directory is writable and has atleast 75 MB of disk space. Installation cannot continue.
The tmp seems to have enough space...
bash-3.2$ df -kh
Filesystem size used avail capacity Mounted on
/dev/dsk/c3t201500A0B826A22Cd4s0
9.8G 5.2G 4.6G 54% /
/devices 0K 0K 0K 0% /devices
ctfs 0K 0K 0K 0% /system/contract
proc 0K 0K 0K 0% /proc
mnttab 0K 0K 0K 0% /etc/mnttab
swap 12G 1.7M 12G 1% /etc/svc/volatile
objfs 0K 0K 0K 0% /system/object
sharefs 0K 0K 0K 0% /etc/dfs/sharetab
/platform/sun4u-us3/lib/libc_psr/libc_psr_hwcap1.so.1
9.8G 5.2G 4.6G 54% /platform/sun4u-us3/lib/libc_psr.so.1
/platform/sun4u-us3/lib/sparcv9/libc_psr/libc_psr_hwcap1.so.1
9.8G 5.2G 4.6G 54% /platform/sun4u-us3/lib/sparcv9/libc_psr.so.1
fd 0K 0K 0K 0% /dev/fd
/dev/dsk/c3t201500A0B826A22Cd4s3
9.8G 409M 9.3G 5% /var
swap 12G 1.0M 12G 1% /tmp
swap 12G 80K 12G 1% /var/run
/dev/dsk/c3t201500A0B826A22Cd4s4
9.8G 4.6G 5.2G 47% /apps
/dev/dsk/c3t201500A0B826A22Cd0s5
128G 73G 53G 58% /data01
/dev/dsk/c3t201500A0B826A22Cd1s6
262G 13G 247G 5% /data02/FMSinvoice
Can someone help kick off the OUI installer. Our customer if getting impatient in not getting it to run. Any help appreicaited
Thanks

Thanks for the replies...
FYI.
I have cloned an Oracle 9i database on a DR test server.
Now I am installing Oracle Application server 10g Forms and Reports (9.0.4) on Solaris 5.10
This is using a Oracle CD which is for Solaris 5.9 but using twp patches supplied by oracle to run the CD from. So it is able to run on Solaris 5.10. It has been done before but by some past DBA some 5 years ago. This is the first time I am attempting this being a new employee here.
I have implemented these suggestions.
Especially the fact that it was looking for a gunzip utuility which it couldn't find. To make it easirer Ij ust copied the gunzip utility to the place it was looking for, and renamed it unzip. As it was loooking for unzip
This worked and passed through.
Created the temp temp directory as welll so it would not have issues in not writting to the tmp directory.
The error I'm getting is below
bash-3.2$ pwd
/data02/FMSinvoice/appsFR904/INSTALL/ForSolaris5_10/4494701
bash-3.2$ /data02/FMSinvoice/appsFR904/INSTALL/SOLARIS/RUNINSTA -paramFile /data02/FMSinvoice/appsFR904/INSTALL/ForSolaris5_10/4494701/ORAPARAM.INI
Starting Oracle Universal Installer ...
Checking requirements...
Checking operating system version: must be 5.8, 5.9 or 5.10.
Actual 5.10 Passed
Checking operating system packages: SUNWarc,SUNWbtool,SUNWhea,SUNWlibm,SUNWlibms,SUNWsprot,SUNWtoo,SUNWi1of,SUNWxwfnt,SUNWi1cs,SUNWi15cs Passed
Checking swap space: must be greater than 1536 MB.
Actual 14791MB Passed
Checking Temp space: must be greater than 150 MB.
Actual 252715 MB Passed
All requirements met.
Checking if CPU speed is above 250 MHz.
Actual 1200 MHz Passed
Checking monitor: must be configured to display at least 256 colors
^C Failed <<<<
>>> Could not execute auto check for display colors using command /usr/openwin/bin/xdpyinfo
Some optional pre-requisite checks have failed (see above). Continue? (y/n) [n] y
Preparing to launch Oracle Universal Installer from /data02/FMSinvoice/appsFR904/tmp/OraInstall2012-08-31_11-12-17AM. Please wait ...The Java RunTime Environment was not found at /data02/FMSinvoice/appsFR904/tmp/OraInstall2012-08-31_11-12-17AM/jre/bin/java. Hence, the Oracle Universal Installer cannot be run.
Please visit http://www.javasoft.com and install JRE version 1.3.1 or higher and try again.
: No such file or directory
I am running humingbird Exceed, and have also set the DISPLAY to my screen.
FYI I am running this from home so the 256 collours error would probably be ok if I did it from work (as I will on Monday)
However I would prbably still get the java error. Should this not be resolved using Exceed though?

Getting error while running Oracle universal installer to run the deinstall

I am running oracle universal installer to run the deinstallation process and getting an error "java runtime environment was not found at C:\TEMP\OraInstall2011-11-14_01-31-42PM\jre\bin\javaw.exe hence oracle universal installer cannot be run. Please visit www.javasoft.com and install jre 1.3.1 or higher and try again"
Is there any workaround for this?

This is regarding an issue while trying to unistall Fusion middleware (11g forms, reports) from the server.
I am running oracle universal installer to run the deinstallation process and getting an error "java runtime environment was not found at C:\TEMP\OraInstall2011-11-14_01-31-42PM\jre\bin\javaw.exe hence oracle universal installer cannot be run. Please visit www.javasoft.com and install jre 1.3.1 or higher and try again"
Is there any workaround for this?

Cygwin X Server to run Oracle Universal Installer

Hi,
I used to run Oracle Universal Installer on my unix server using an Exceed X Server on my Windows laptop. Recently my laptop was upgraded to Windows 7 and I can no longer use my version of Exceed on this version of Windows.
Therefore I was going to try and use the freeware Cygwin X Server on my laptop instead.
I connected to the Cygwin X Server site http://x.cygwin.com/ - I wasn't sure what to download, so I downloaded the following using their setup.exe program ( which gets downloaded to my windows pc )
- X Console
- Xhost
- Xinit
- Xorg Server
- XTerm
Q1. In order to run the Oracle OUI, I am not sure I needed anything other than Xorg Server - is that correct ? I am not really sure what the others do
Q2. I was surprised when I downloaded these components they were supplied as packages with an extension of *.tar.bz2. To me these are components you would not / could not install onto a windows pc ?
All I am simply trying to is - to run an X Server solution ( in this case I was hoping Cygwin ) on my pc, set the $DISPLAY ( as approrpiate ) on my backend unix server, launch the OUI on the unix server and have the OUI appear on the X Server running on my pc.
But alas I am a bit stuck around getting the correct Cygwin X Server solution for my pc
Any ideas where I am gong wrong ?
thanks,
Jim

Jimbo wrote:
Hi,
I used to run Oracle Universal Installer on my unix server using an Exceed X Server on my Windows laptop. Recently my laptop was upgraded to Windows 7 and I can no longer use my version of Exceed on this version of Windows.
Therefore I was going to try and use the freeware Cygwin X Server on my laptop instead.
I connected to the Cygwin X Server site http://x.cygwin.com/ - I wasn't sure what to download, so I downloaded the following using their setup.exe program ( which gets downloaded to my windows pc )
- X Console
- Xhost
- Xinit
- Xorg Server
- XTerm
Q1. In order to run the Oracle OUI, I am not sure I needed anything other than Xorg Server - is that correct ? I am not really sure what the others do
Q2. I was surprised when I downloaded these components they were supplied as packages with an extension of *.tar.bz2. To me these are components you would not / could not install onto a windows pc ?
All I am simply trying to is - to run an X Server solution ( in this case I was hoping Cygwin ) on my pc, set the $DISPLAY ( as approrpiate ) on my backend unix server, launch the OUI on the unix server and have the OUI appear on the X Server running on my pc.
But alas I am a bit stuck around getting the correct Cygwin X Server solution for my pc
Any ideas where I am gong wrong ?
thanks,
JimAs sb alluded to by giving a link to the site, you can use xming as your x-server. It's free, lightweight, and drop-dead simple to install. No bells and whistles. Just a solid x-server.
And once I discovered x11 port forwarding, I no longer even have to set DISPLAY to match the ever-changing DHCP-assigned ip address of my pc. I use PuTTY as my ssh client, and configure the session to allow x11 port forwarding. I can't remember the last time I had to monkey around with DISPLAY.

ODBC 8.1.7.4 - Oracle Universal Installer v. 1.7.1.3.0

Hi all,
Situation
I'm trying to install ODBC 8.1.7.4 - however when having selected the products.jar the OUI (1.7.0.something) says that this package needs OUI 1.7.1.3.0 to be installed.
Problem
The OSP (which is the only component I can find on OTN that has the OUI) on the OTN download - is version 1.7.0.something).
Does anyone know where to get the latest - required - OUI ??
Extra Q
Do I need more than the ODBC to connect from a W2K to a SUN based Oracle ?
(I saw something about Net8 - but have no clue if that's part of the ODBC package)
Best regards and (urgent :-) thanks
Vitus

The ODBC driver relies on a lot of different libraries that are part of the Oracle client. The Net8 protocol, the NLS libraries, etc. in addition to the Oracle Universal Installer. If you do a custom install of the Oracle client, you can get the minimal set of libraries required by the ODBC driver.
Client/ server systems like ODBC, however, aren't designed to be particularly lightweight. A protocol like JDBC, which is designed to be used with thin clients, is designed to be used without the Oracle client.
Justin

Oracle 10g Installation Problem on SUSE Linux 10

Hello Friends,
I want to install SAP Solution Manager 7.0 with Oracle 10g on SUSE Linux 10.0.
But, while starting the Installation i am getting following Errors.
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1,
asianux-2 or SuSE-10
                                      Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-04-22_03-59-38PM. Please wait ...
Error in writing to directory /tmp/OraInstall2009-04-22_03-59-38PM. Please ensure that this directory is
writable and has atleast 60 MB of disk space. Installation cannot continue.
: Success
I have checked the Permissions and the Size of /tmp Directory, which is as followed:
drwxr-xr-x 11 root root    0 2009-04-22 21:19 sys
drwxrwxrwt 52 root root 1824 2009-04-22 16:00 tmp
drwxr-xr-x 15 root root 408 2009-04-19 14:43 usr
Filesystem           1K-blocks      Used Available Use% Mounted on
/dev/sda10             2104376     73112   2031264   4% /tmp
I am starting the Oracle 10g Installation within orasm7 User which is a member of dba, users, disk groups.
The directories which are created upon starting the Oracle Installation in /tmp directory are having the situations as followed:
drwxr-xr-x 3 orasm7   dba          128 2009-04-21 18:41 OraInstall2009-04-21_06-41-14PM
drwxr-xr-x 3 orasm7   dba          128 2009-04-21 18:41 OraInstall2009-04-21_06-41-25PM
drwxr-xr-x 3 orasm7   dba          128 2009-04-22 15:59 OraInstall2009-04-22_03-59-38PM
The Oracle Installation log is as follwoed:
Using paramFile: /home/MyData/51031676/database/install/oraparam.ini
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1, asianux-2 or SuSE-10
                                      Passed
All installer requirements met.
The commandline for unzip:
/home/MyData/51031676/database/install/unzip -qqq ../stage/Components/oracle.swd.jre/1.4.2.0.8
/1/DataFiles/\*.jar -d /tmp/OraInstall2009-04-22_03-59-38PM
I have set DISPLAY variable in this way before starting Installation:
DISPLAY=$HOSTNAME:0.0
export DISPLAY
I tried to search the solution over the internet for this kind of problem, but i am not able to find its solution. Even i tried to start the Orale installation using this parameter: ./runInstaller ignoreSysPrereqs, but still it is giving the same unexpected error.
I have a doubt on File/Directory permissions which are created for Installation in /tmp. The umask setiing of the system is 0022.
Please, help me for this issue.
Thanks & Regards,
Bhavik G. Shroff

Hi Markus,
How are you ?
Thank you very much for your reply.
I was executing wrong runInstaller file. RUNINSTALLER is right file for starting the execution. But still i am facing the same error, which is as followed.
Preparing response files. Please wait:
======================================
Working on /home/MyData/51031676/database/SAP/SVRCUSTOM.RSP
/home/MyData/51031676/database/SAP/SVRCUSTOM.RSP --> /tmp/.orainst_rsp.27450: Done
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1, asianux-2 or SuSE-10
                                      Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM. Please wait ...
Error in writing to directory /home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM. Please ensure that
this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
: Success
SHROFF:~ # cd /home/orasm7/tmpora/
SHROFF:/home/orasm7/tmpora # ll
total 0
drwxr-xr-x 3 orasm7 dba 128 Apr 22 17:25 OraInstall2009-04-22_05-25-26PM
SHROFF:/home/orasm7/tmpora # cd OraInstall2009-04-22_05-25-26PM/
SHROFF:/home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM # ll
total 4
drwxr-xr-x 2 orasm7 dba 304 Apr 22 17:25 images
-rwxr-xr-x 1 orasm7 dba 504 Apr 22 17:25 installActions2009-04-22_05-25-26PM.log
SHROFF:/home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM #
I have a doubt on tmp_netca_file & tmp_dbca_file variable.
Please give your suggestion for the same.
Regards,
Bhavik G. Shroff
Edited by: Bhavik G. Shroff on Apr 22, 2009 2:10 PM

Oracle 10g Installation Problem in HP-UX 11.31

Hi
I am installing ERP 2005 SR2 on HP-UX 11.31 OS with ORACLE database. When I am running ./RUNINSTALLER getting following error. Error Log as follows
Using paramFile: /oracle/stage/102_64/database/install/oraparam.ini
Checking installer requirements...
Checking operating system version: must be B.11.23. Actual B.11.31
Failed <<<<
Exiting Oracle Universal Installer, log for this session can be found at /tmp/OraInstall2008-07-16_11-26-39AM/installActions2008-07-16_11-26-39AM.log
When I look into oraparam.ini file from given path found entries as follows
[Certified Versions]
#You can customise error message shown for failure through CERTIFIED_VERSION_FAILURE_MESSAGE
Solaris=5.6,5.7,5.8,5.9
Linux=redhat-2.1AS
HPUX=B.11.23
Decunix=V5.1A,V5.1
AIX=5.1.0.0
[HPUX-B.11.23-required]
#PATCHES required by JRE and Product, /usr/sbin/swlist -l patch gets list of patches on system
PATCHES=
#PACKAGES required by JRE and Product, /usr/sbin/swlist -l product gets list of packages on system
PACKAGES=
#Patch bundles required for Oracle.
#/usr/sbin/swlist -l bundle gives list of bundles.
#Each item should follow the format "bundle:version"
#ex.,GOLDBASE11i:B.11.11.0106.9,GOLDAPPS11i:B.11.11.0106.9
BUNDLE=
#Minimum swap space required by OUI, Increase it if your product installation so requires
SWAP_SPACE=250
TEMP_SPACE=250
BUNDLE_FAILURE_MESSAGE=Some patch bundles were not found on the system. Please verify if the system is at a higher bundle level.
Please let me know how to overcome this problem.
Regards
Jayakar

Hi ,
If anyone come across this kind of errors don't try to perform any workaround which is not recommended by sap as later in post installation steps there will be errors so please go through below SAP note as it has some workarounds recommends by SAP
Note 980426 - Oracle 10.2 Software installation on new operating systems
Shanaka.

Mandrake Linux 8.0 - can't get Oracle Universal Installer to run

Hi all.
I'm having trouble getting Oracle's Universal Installer to run.
I'm trying to become DBA certified, so I went and purchased
(among
other materials) a book titled "Oracle8i for LINUX Starter Kit",
authored by Steve Bobrowski, published by Oracle Press / Osborne
McGraw-Hill, ISBN 0-07-212442-3.
The book includes a CD-ROM with Oracle8i Enterprise Edition,
Release 2, version 8.1.6 for LINUX.
I'm running an Intel P-III 500 MHz with 512MB RAM, 30GB hard disk
exclusively configured for Linux (no other O/S on it) and Oracle
(so LOTS of hard disk space is available), Matrox Millennium G400
video card (32MB).
My hardware exceeds all requirements listed in aforementioned
book, and also in Oracle's own documentation (from their web
site).
I'm running Mandrake's Linux 8.0, PowerPack Edition, with:
kernel = 2.4.3
XFree 4.0.3 (and I've also tried 3.3.6, with identical results
to those listed below)
glibc 2.2.2
I've followed the book's instructions to the letter, and set up
the environment variables, oracle user, and subdirectories as
required.
So far, so good.
OK. Now, here's where the problem appears:
I log in as the oracle user, and try to start the Oracle
Universal Installer (following the instructions in the book)
as follows:
cd /mnt/cdrom
./runInstaller
The computer tries to do some stuff, then spews the information
listed at the bottom of this posting to the screen. I press
<ENTER> after "OK" and get dumped back to the bash prompt.
That's it. I can't go any further. No Oracle Universal
Installer.
By the way, I've also downloaded Oracle8i Enterprise Edition
Release 3, version 8.1.7 from Oracle's website, and tried to
install that, too. Exactly same results.
The nice folks at Oracle have politely told me to get lost,
and not bug them for unpaid support.
I'd really like to get this stuff up and running, so I can
start studying and practicing for DBA, but I need help 'cause
this problem is beyond me.
So... can anyone help??
Thanks in advance.
[email protected]
[email protected]
=================================================================
=========
Here's what shows up when I try to start the Oracle Universal
Installer:
[oracle@localhost cdrom]$ ./runInstaller
[oracle@localhost cdrom]$ Initializing Java Virtual Machine
from ../stage/Components/oracle.swd.jre/1.1.8/1/DataFiles/Expande
d/linux/bin/jre. Please wait...
SIGSEGV received at bfffedac
in /mnt/cdrom/stage/Components/oracle.swd.jre/1.1.8/1/DataFiles/E
xpanded/linux/lib/linux/native_threads/libjava.so. Processing
terminated
Sat Sep 29 12:58:56 2001
jre full version "JDK 1.1.8 IBM build l118-20000429 (JIT
enabled: jitc)"
Operating Environment
Host : localhost.localdomain.localdomain
OS Level : 2.4.3-20mdk.#1 Sun Apr 15 23:03:10 CEST 2001
glibc Version : 2.2.2
No. of Procs : 1
Memory Info:
total: used: free: shared: buffers: cached:
     Mem: 525901824 116862976 409038848 0 6377472
61140992
     Swap: 1069244416 0 1069244416
     MemTotal: 513576 kB
     MemFree: 399452 kB
     MemShared: 0 kB
     Buffers: 6228 kB
     Cached: 59708 kB
     Active: 63740 kB
     Inact_dirty: 2196 kB
     Inact_clean: 0 kB
     Inact_target: 1072 kB
     HighTotal: 0 kB
     HighFree: 0 kB
     LowTotal: 513576 kB
     LowFree: 399452 kB
     SwapTotal: 1044184 kB
     SwapFree: 1044184 kB
     User Limits (in bytes except for NOFILE and NPROC) -
     RLIMIT_FSIZE : infinity
     RLIMIT_DATA : infinity
     RLIMIT_STACK : 2093056
     RLIMIT_CORE : 0
     RLIMIT_NOFILE : 1024
     RLIMIT_NPROC : 16383
Application Environment
Signal Handlers -
SIGQUIT : ignored
SIGILL : sysThreadIDump (libjava.so)
SIGABRT : sysThreadIDump (libjava.so)
SIGFPE : sysThreadIDump (libjava.so)
SIGBUS : sysThreadIDump (libjava.so)
SIGSEGV : sysThreadIDump (libjava.so)
SIGPIPE : ignored
SIGUSR1 : doSuspendLoop (libjava.so)
Environment Variables -
PWD=/mnt/cdrom/install
LTDL_LIBRARY_PATH=/usr/lib
ORACLE_SID=oralin
TMPDIR=/usr/oracle/tmp
XAUTHORITY=/usr/oracle/.Xauthority
mc=
LC_MESSAGES=en_US
HOSTNAME=localhost.localdomain
LD_LIBRARY_PATH=/mnt/cdrom/stage/Components/oracle.swd.jre/1.1.8/
1/DataFiles/Expanded/linux/lib/linux/native_threads:/lib:/usr/lib
:/usr/lib
NLSPATH=/usr/share/locale/%l/%N
CLASSPATH=/usr/oracle/tmp/OraInstall:../stage/Components/oracle.s
wd.oui/1.7.0.18.0A/1/DataFiles/Expanded/lib/OraInstaller.jar:../s
tage/Components/oracle.swd.oui/1.7.0.18.0A/1/DataFiles/Expanded/l
ib/InstImages.jar:../stage/Components/oracle.swd.oui/1.7.0.18.0A/
1/DataFiles/Expanded/lib/InstHelp.jar:../stage/Components/oracle.
swd.oui/1.7.0.18.0A/1/DataFiles/Expanded/lib/oracleice.jar:../sta
ge/Components/oracle.swd.oui/1.7.0.18.0A/1/DataFiles/Expanded/lib
/help.jar:../stage/Components/oracle.swd.oui/1.7.0.18.0A/1/DataFi
les/Expanded/lib/ewt.jar:../stage/Components/oracle.swd.oui/1.7.0
.18.0A/1/DataFiles/Expanded/lib/xmlparser.jar:../stage/Components
/oracle.swd.oui/1.7.0.18.0A/1/DataFiles/Expanded/lib/swingaccess.
jar:/mnt/cdrom/stage/Components/oracle.swd.jre/1.1.8/1/DataFiles/
Expanded/linux/lib/rt.jar:/mnt/cdrom/stage/Components/oracle.swd.
jre/1.1.8/1/DataFiles/Expanded/linux/lib/i18n.jar:/mnt/cdrom/stag
e/Components/oracle.swd.jre/1.1.8/1/DataFiles/Expanded/linux/lib/
math.jar:/mnt/cdrom/stage/Components/oracle.swd.jre/1.1.8/1/DataF
iles/Expanded/linux/lib/classes.zip
LESSKEY=/etc/.less
LANGUAGE=en_US:en
LESSOPEN=|/usr/bin/lesspipe.sh %s
BROWSER=kfmclient openProfile webbrowsing
LESS=-MM
USER=oracle
LC_TIME=en_US
LS_COLORS=no=00:fi=00:di=01;34:ln=01;36:pi=40;33:so=01;35:bd=40;3
3;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=01;32:*.cmd=01;
32:*.exe=01;32:*.com=01;32:*.btm=01;32:*.bat=01;32:*.tar=01;31:*.
tgz=01;31:*.tbz2=01;31:*.arc=01;31:*.arj=01;31:*.taz=01;31:*.lzh=
01;31:*.lha=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.bz
2=01;31:*.bz=01;31:*.tz=01;31:*.rpm=01;31:*.jpg=01;35:*.jpeg=01;3
5:*.gif=01;35:*.bmp=01;35:*.xbm=01;35:*.xpm=01;35:*.png=01;35:*.t
if=01;35:*.tiff=01;35:
THREADS_TYPE=native_threads
MACHTYPE=i586-mandrake-linux-gnu
KDE_MULTIHEAD=f
KDE_MULTIHEAD=false
HELP_BROWSER=kfmclient openProfile webbrowsing
THREADS_FLAG=native
MAIL=/var/spool/mail/oracle
INPUTRC=/etc/inputrc
GTK_RC_FILES=/etc/gtk/gtkrc:/usr/oracle/.gtkrc
XMODIFIERS=@im=none
LANG=en
JAVA_HOME=/mnt/cdrom/stage/Components/oracle.swd.jre/1.1.8/1/Data
Files/Expanded/linux
ORACLE_BASE=/usr/oraInventory
LC_NUMERIC=en_US
COLORTERM=
ORACLE_HOME=/usr/oracle
TMP=/usr/oracle/tmp
DISPLAY=localhost:0.0
LOGNAME=oracle
SHLVL=3
LC_CTYPE=en_US
SESSION_MANAGER=local/localhost.localdomain:/tmp/.ICE-
unix/1074
SHELL=/bin/bash
HOSTTYPE=i586
QT_XFT=0
OSTYPE=linux-gnu
HISTSIZE=1000
HOME=/usr/oracle
TERM=xterm
PATH=/bin:/usr/bin:/bin:/usr/bin:/usr/X11R6/bin:/usr/local/bin:/u
sr/X11R6/bin:/usr/games:/usr/oracle/bin
SECURE_LEVEL=3
LC_MONETARY=en_US
RPM_INSTALL_LANG=en_US:en
LC_COLLATE=en_US
LIBPATH=/mnt/cdrom/stage/Components/oracle.swd.jre/1.1.8/1/DataFi
les/Expanded/linux/lib/linux/native_threads
Libraries Loaded by the JVM
<main>
libjitc.so
libzip.so
Current Thread Details
"main" (TID:0x4032a2d8, sys_thread_t:0x804de98)
Native Thread State: ThreadID: 00000400 Reuse: 1 USER
PRIMORDIAL RUNNING
Native Stack Data : base: bfffef08 pointer bffdf764 used
(128932) free(-12196)
----- Monitors held -----
----- Native stack -----
Java_java_lang_System_initProperties_stub
invokeNativeMethod
invokeLazyNativeMethod
__irem_trap6
------ Java stack ------ () prio=5 *current
thread*
java.lang.System.initializeSystemClass(System.java)
Total Thread Count: 3
Active Thread Count: 3
JNI Thread Count: 0
Full thread dump:
"Async Garbage Collector" (TID:0x4032a238,
sys_thread_t:0x80dca78)
Native Thread State: ThreadID: 00000803 Reuse: 1 DAEMON
MONITOR WAIT
Native Stack Data : base: bf5ffb20 pointer bf5ff914 used
(524) free(116212)
----- Monitors held -----
----- Native stack -----
sysMonitorWait
sysThreadSleep
threadSleep
SetOrigArgs
sysThread_shell
pthread_detach
__clone
------ Java stack ------ () prio=1
"Finalizer thread" (TID:0x4032a288, sys_thread_t:0x80dc7f8)
Native Thread State: ThreadID: 00000402 Reuse: 1 DAEMON
MONITOR WAIT
Native Stack Data : base: bf7ffb20 pointer bf7ff988 used
(408) free(116328)
----- Monitors held -----
----- Native stack -----
sysMonitorWait - waiting on Finalize me queue lock
finalizeOnExit
sysThread_shell
pthread_detach
__clone
------ Java stack ------ () prio=1
"main" (TID:0x4032a2d8, sys_thread_t:0x804de98)
Native Thread State: ThreadID: 00000400 Reuse: 1 USER
PRIMORDIAL RUNNING
Native Stack Data : base: bfffef08 pointer bffdf758 used
(128944) free(-12208)
----- Monitors held -----
----- Native stack -----
Java_java_lang_System_initProperties_stub
invokeNativeMethod
invokeLazyNativeMethod
__irem_trap6
------ Java stack ------ () prio=5 *current
thread*
java.lang.System.initializeSystemClass(System.java)
System Monitor Status
Thread queue lock: unowned.
Name and type hash table lock: unowned.
String intern lock: unowned.
JNI pinning lock: unowned.
JNI global reference lock: unowned.
Zip lock: unowned.
BinClass lock: unowned.
Class loading lock: unowned.
Java stack lock: unowned.
Code rewrite lock: unowned.
Heap Lock: unowned.
Has finalization queue lock: unowned.
Finalize me queue lock: unowned.
Integer lock access-lock: unowned.
Monitor cache lock: unowned.
Monitor registry: unowned.
Object Monitor Status
OK
[oracle@localhost cdrom]$
=================================================================
=========
[email protected]
[email protected]

I have Mandrake 8.0 on PII-600, 256 RAM. I used the downloaded
8.1.7. Edit JRE_LOCATION in Disk1/install/oraparam.ini to point
to your version of JRE 1.1.8 v3 (JRE from
http://www.backdown.org). Then try with NUMLOCK=OFF.
I just clicked the 'typical' installation. It failed at the end
and did not install the database manager. The error message was:
SIGGEV received at bfffea90 in
/u01/app/oracle/jre/1.1.8/lib/linux/native_threads/libjava.so
Process terminated
Writing stack trace to javacore30299.txt... OK
/u01/app/oracle/product/8.1.7/bin/dbassist: line 103: 30229
Segmentation fault $JRE_EXEC -Duser.dir=$USER_DIR -classpath
$CLASSPATH DBCreateWizard $ARGUMENTS
If you get beyond this point, let me know. Good luck!

[b]Can't not run the Oracle Universal Installer (Oracle8.1.7 for Linux) on

I have a problem when try to install Oracle8i Release 8.1.7 Enterprise Edition on RedHat Linux 7.3. After I do the pre-installation tasks, i enter the command (runs as the oracle user):
$ /tmp/Disk1/runInstaller
I wait for the one minute and then nothing is happen. I don't understand the reason why the Oracle Universal Installer can't not display! Please tell me all reasons may be!

Sorry the Oracle version should be 1.7 not 1.1.7. I downloaded it from the web site. The JRE I downloaded is jre 1.18 because the installer asked for this version.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Bin Yao ([email protected]):
I have a problem to install Oracle8 1.1.7 for linux on Mandrake. When I run ./runIstaller I got a error message that the Java RunTime Enviroment was not found at ?/bin/jre. The "?"stands for a strange character and may change at diffrent time runing the installer. I downloaded a JRE from blackdown and make a link to /usr/local/jre and I also tried to make link to the JRE shiped with Oracle8 1.1.7. But I still get same error. Does Oracle8 1.1.7 still need JRE downloaded and insatll(or link) to /usr/local/jre? I don't know what else I can try. Please give me a help. Thanks.<HR></BLOCKQUOTE>
null

"Oracle Universal Installer" instead of "Oracle Webcenter Suite 10.1.3.2.0"

Hi,
I've installed HTTP_Server from [Oracle HTTP Server (Apache 2.0) (10.1.3.3.0) for Microsoft Windows (32-bit)|http://www.oracle.com/technology/software/products/database/oracle11g/111060_win32soft.html] ; unfortunately, I was unable to control the installation process (select advanced install, password, hostname, port number...), because I got the "Oracle Universal Installer" instead of the "Oracle Webcenter Suite 10.1.3.2.0 Installation" screen, as shown in the installation documentation.
Although I suspect I'll be able to configure via the various configuration files, I've had to install every single component, instead of just the one I need. Has anyone encountered the same problem and know how to fix it?
Thanks,
Chris.

Actually, my problem is that I was not prompted to choose between basic and advanced; that's in the "Oracle Webcenter Suite 10.1.3.2.0 Installation" screens, as seen in the installation instructions. But the "Oracle Universal Installer" screen that I get when I click setup.exe doesn't give you that choice.
This isn't actually a big deal, because HTTP_Server was still correctly installed, but I had to configure it manually. I'm just trying to figure out why it is that I didn't get the correct installer.
Does anyone know how I can get the "Oracle Webcenter Suite 10.1.3.2.0 Installation" application instead of the "Oracle Universal Installer"?
Edited by: gers32 on Nov 20, 2009 5:58 AM

Oracle Universal Installer response files and platform independency

Hi all,
The Oracle Universal Installer is a platform-independent system, to what extent are Oracle Universal Installer response files platform-independent? For sure it's not completely platform-independent, because path definitions aren't portable - Windows versus Linux for example. My hope is that all possible variables within response files are exactly the same as on different platforms. Also the possible values for the variables should be portable, except for the path definitions, of course.
Can anyone confirm that my thoughts are true?
Durk

Hi,
This problem frequently occurs because of the wrong DISPLAY settings. Please perform the steps on a X-term terminal screen;
1) under root user
2) xhost +
3) su - ora<sid>
4) echo $DISPLAY
5) setenv DISPLAY <client ip>:(result of echo $DISPLAY) (for example setenv DISPLAY 192.168.1.100:0.0)
6) xclock (test X-Client)
If it works then you will be able to run "./runInstaller", for example
cd /oracle/stage/102_64/database/Disk1/SAP
./RUNINSTALLER
You can check the [installation guide|https://websmp204.sap-ag.de/~sapidb/011000358700000359232008E], also. Search for "4.4.3 Running the Oracle Universal Installer" title and read the details,
Best regards,
Orkun Gedik

9i's Oracle Universal Installer problem in W2K server! Please Help.

Similar Messages

Maybe you are looking for