9iAS and database on Linux
I'm about to try and install 9iAS and 8.1.7 on a machine running Red Hat 7.0.
Two questions:
1. Is it possible for them to reside on the same machine without conflict?
2. Any "tips" for a smooth installation?
Cheers
Steve
It's true, I have been able to run iAS 1.0.2, but I won't be able to run 8i 8.1.7 under RedHat 7.0 until Oracle solves a tricky problem. Oracle server 8.1.7 has been compiled with an older glibc library. RedHat 7.0 comes with glibc 2.1.9. Up till now, the only way to get 8.1.7 Server running under RedHat 7.0 is to install it under RedHat 6.X and then upgrade RedHat to 7.0. But, if you ever need to relink Oracle 8.1.7, you'll have to fool the gcc enviroment to make the server think it has an older glibc. All in all it's to messy to work with. Probably the best solution is to keep a machine running redHat 6.2 wiht Oracle 8.1.7 and install iAS 1.0.2 as the frontend machine. After all, frontend machines are those that interact with the user and those that benefit most from an up-to-date operating system. Metalink Alert states that Oracle is trying to solve the issue, but I think the only easy solution is comming up with a new full release of 8.1.7 server.
Similar Messages
-
Installing Oracle 9ias and Portal on Linux - hard work???
Has anyone else tried to install 9ias 1.2.2.1 onto an Intel Linux platform, specifically RedHat? If so I wonder if it has been straightforward to you? If so please let me know!!! I have been struggling away at it for over three weeks, and almost nothing works out of the box, so I have to start endless TARs with OSS, and the problem is that they seem to be struggling and floundering as well. So far I have been asked for a huge amount of information and config files etc (copies of which they presumably have already) with almost nothing back. The particular problems at the moment are: changing the login server to use ldap (Oracle Internet Directory) and running portal under ssl. We (OSS and I) just can't get these to work. The latest plan by OSS is to patch portal to version 3.0.9.8.3, however, when I install that it fails, with basic shell script errors (eg : command not found)!!
There are other problems - eg Forms doesn't work properly; Reports doesn't work at all. These things I will have to sort out later, as it gets a bit confusing for everyone having several TARs open at once.
If anyone has any ideas or insight into this I would be grateful.
DavidIt is not easy to configure. The patches produce side effects and this has caused delays from tech support. A bundle patch was applied to Rel 2 that has solved some problems. Why rel 2 production is not shipping is anybody's guess. The lack of practical expertise means that only corporate customers get preference. I have installed on quite few (NEW) solaris boxes in Europe and it does install ok but re-install gives some problems. BUT 'timeout' is a serious problem even after working on it (1.0.2.2 v2 3.0.9.8) for more than one year. The modules are not integrated smoothly, as you also experience. The cache is not efficient.
I suggest that you wait for rel 2 production (DOWNLOADED LACK THE PATCHES, so don't waste time) then try it on a clean box.
Sunder (An Oracle & Portal DBA Consultant) -
11gR2 RAC, ASM and database
Hi all,
I've installed 11gR2 RAC and database on Linux OEL 5.4. Everything seems Ok, I'm able to connect from client using SCAN, and load balancing works well, but "crs_stat -t" shows up some OFFLINE services, like gsd and oc4j.
Is this normal ? If yes, why it's so ? If not, what should I do to solve the problem ?
Thanks in advance.
AntoineThanks for your answer.
Those services are disabled, and I've found this one on MOS FAQs :
With Oracle Clusterware 11g Release 2, the GSD resource will be disabled by default. You only need to enable this resource if you are running Oracle 9i RAC in the cluster. -
CAN I INSTALL BOTH (ORACLE 9IAS AND ORACLE DATABASE )INTO SAME MACHINE.
oracle 9ias and oracle 9i database in same machine Feb 25, 2003 11:22 PM
Reply
Dear Friends,
I installed oracle 9ias. and then i hosted my form,report into that server . All was working properly.
at this time my database was into another machine.
then i installed oracle 9i database into the same machine
(as the oracle 9ias was installed)
at the instalation of oracle 9i database one error comes
and shows that Agent configuration Assistant Installation
fail.
but After installation of database it work properly.
there is no problem.
but when I try to run from through web(by using oracle 9ias)
it gives Internal error(500).
i check and find that my appache server for 9ias is working properly and in services of windows 2000 no error comes.
HOW CAN I INSTALL BOTH (ORACLE 9IAS AND ORACLE DATABASE )INTO SAME MACHINE.
With regards
Siddharth Singh
[email protected]Hi James,
Have u ever tried ORACLE 9iAS R2 on Redhat Linux ?
If yes what is the version of RH Linux you were using ?
Any docs for that ?
[email protected]
Regards
Amudharasu -
Startup and shutdown of Apps and database on R12 with linux server reboot
Hi Guys,
Version : R12
Platform : Linux EL 5
Hi Guys,
I am trying to startup and shutdown the R12 apps and database automatically with Linux server reboots.
Does any one have steps to do this or metalink note:
Thanks in advance,
ZHi,
Please see this thread.
Autostart of Services
Re: Autostart of Services
Regards,
Hussein -
My question was about the necessity of implementing OID or any other version of LDAP.
We have a new 9iAS and 8.1.7 database implementation and i have a doubt about their networking architecture.
I want to know the ways of connecting 9iAS to Database and clients to database through 9iAS as middleware. We are debating if OID is compulsory or if we can go ahead with this implementation with out OID.
Can you please help me and provide me couple of implementation designs(i.e connecting clients to database through 9iAS). It would be great if any one can provide me the implementation's with and with out OID.
-ThanksHi ,
For all delta and full DTP loads you can get information in table RSICCONT .Check table RSMONICDP this will give you detail information .Here you will get all the information with timestamp and request id .
Hope these tables will serve your purpose .
Regards,
Jaya -
Installing 11i apps on windows xp and Red Hat linux AS 3.0
Hi,
I am a newbie to Oracle E-business suite............i will be very helpful if anybody could help me with the full procedure on how to install Oracle apps on windows on Windows XP and Red Hat linux AS 3.0.........starting with configuring ip.....i would really appreciate if somebody helps me out...........well thanks in advance..waiting for a optmistic reply...
Thanks again,
VirendraI have done installation on XP and 2000 servers are heres the steps... detailed ones. I also request those who install Oracle Apps 11i to first read the installtion pdf's which helps you understand clearly the prerequisites overall.
You cannot find the Pre installtion steps(such as Mks Toolkit and GNUMake config) in more clear terms from those documents.Which are explained here.
The Must PDF's to refer before installation
1)r1152ins.pdf
2)11iconcepts.pdf
According to the 11iconcepts PDF you can decide your business needs the N-Tier Architecture and Database Server and Application Tier Server File System in a very clear terms.
The installation process can be divided into
Pre Installtion,Installation and Post-Installation stages.
I would caution everyone to concentrate more on Pre Installation stage and which is more critical for a successfull installtion of Oracle Apps and to be free with later cropping up problems.
Further before moving into Installtion stages i have to Explain the Number of CD's and Installtion type's in Oracle App's.
In many places you may need to wait patiently even more than 10 minutes for screens(Dialog Boxes) to appear dont conclude prematurely some problem on system.
In oracle Apps 11.5.1 it consist of 12 CD's.
1) Start Here CD(RAPID Installation Wizard)
2)1-11 CD's
1-3 Application Top information
4th Oracle DB
5-6 IAS and other tools
7-11 Oracle Apps DB.
You have to decide whether you are going to do a Single Node Installation(No Post-Installation Task) or Multi Node Installation. Refer(r1152ins.pdf)
While installing for Multi Node you can see the Installation locations to be mentioned as
Appl_Top,Common_Top,Data_Top etc.Try to install Appl_top and common_Top in one drive and Data_Top in another Drive(Single Node) and in different nodes in Multi Node installation.
Installation Types
Production ==>Real time Env implementation's
Test ==>For test Env Purposes
Vision Demo==>R&D or learning Purposes.
Pre-Installation steps
======================
Space Requirement for types of installtions
Install VC++
How to Download and install MKS tool Kit
How to Download and Configure GNUMAKE
Env path setting
Create Applmgr user in Win2000
Space Requirement for types installtion:
Memory Requirement
1 GB of RAM(512 Fine for initial Installtion)
but planned for more user connections another 1 GB of Ram and according to the number of user's and Application needs you have to Increase the Memory.
HDD capacity
APP_Top(A)
COMMON_TOP(C)
DATA_TOP(D)
Test DB : 22 + 20 GB (60 GB recommended)
Prod DB : 22 + 20 GB (60 GB recommended)
Vision Demo DB: 22 + 35 GB (80 GB recommended).
Plus space for ur staging area.
This are the actuall space required for the Oracle Apps Alone plan for more space for future needs etc.
Softwares on System
Win2000 server with Patch1,Winzip and Acrobat Reader Latest version etc.
Install VC++:
Install a clean installtion of VC++ of Visual Studio Family 6.0
It should be first installed before installing MKS or GNUMAKE
NOTE: When Visual C++ is installed, let the installer register all environment variables. This will allow executables to be linked from the command line.
How to Download and install MKS tool Kit:
Note:Try to purchase the MKS tool kit from the below site.
or try to download the trial version valid for a months time.
http://www.mkssoftware.com/products/tk/ds_tkio.asp
Evaluation copy from
http://www.mkssoftware.com/eval/
Choose "MKS Toolkit for Interoperability " Download it in C:\
Again you have to click the downloaded kit to start the actual download of 38 MB of MKS tollkit Evaluation version.
You will be sent a Demo serial number to your mail id==>copy the same to a Notepad on your desktop.
Now start the installtion of the MKSToolkit on your system by clicking on the MKStoolkit downloaded.
It will prompt you for the Demo serial number which has to be provided.
The MKStoolkit will be successfully installed.
How to Download and Configure GNUMAKE:
1) HOW TO GET AND INSTALL GNUMAKE ON WINDOWS2000
This can be done by performing the following steps:
NOTE: Please, be aware that you must install Visual C++ BEFORE installing GNUMAKE, because its installation process involves linking executables.
1) Before downloading GNUMAKE, you will need to acquire some utilities which will be used for unpacking files. You can obtain the required utilities at the following
URL: ftp://ftp.gnu.org/gnu/windows/emacs/utilities/i386/
The directory contains the following files:
README
djtarnt.exe
gunzip-1.2.4-i386.exe
gzip-1.2.4-i386.exe
tar-1.11.2-i386.exe
tar-1.11.2a.exe
Only two of the files are required:
gunzip-1.2.4-i386.exe and tar-1.11.2a.exe
2) After downloading the above files, rename them as follows:
gunzip-1.2.4-i386.exe => gunzip.exe
tar-1.11.2a.exe => tar.exe
Place them into a directory that you can set in you PATH environment variable.
3) Point your browser to the following
URL: ftp://ftp.gnu.org/gnu/make
The files needed from this directory are:
make-3.77.tar.gz
make-3.78.1.tar.gz
make-3.79.1.tar.gz
make-3.79.tar.gz
Development requires to install version 3.77 or above. Downloading the latest version is perhaps best decision, but there are advantages to downloading the version required by development (3.77). (This document assumes that version 3.77 has been downloaded) (NOTE: AVOID USING SPACES IN
DIRECTORY AND FILE NAMES. GNUMAKE,VISUAL C++, ETC. DO NOT ALWAYS DEAL WELL WITH SPACES)
4) For instance, suppose you have downloaded file make-3.77.tar.gz on a directory called C:\GNUMAKE, unpack this file using gunzip.exe from a Command Prompt Window
Example: C:\GNUMAKE>gunzip make-3.77.tar.gz This last action, will expand file make-3.77.tar.gz and the extension .gz will be removed.
5) On the same Command Prompt Window, you should UnTAR the file, with the following
command: C:\GNUMAKE>tar -xvf make-3.77.tar This will create a new subdirectory called MAKE-3.77 under C:\GNUMAKE, the original directory.
6) In the new subdirectory, there is a batch file
called build_w32.bat; run the batch file to generate GNUMAKE.EXE
Try this from Command Prompt more than once if succesfully not built message appers till you get Generated successfully.
Note:If Possible run all the bat files in the MAKE-3.77 and also config.bat in the sub directory by double clicking it.
WARNING: There is a known issue with this last step, "GNU make fails to build regardless of chosing build_w32 or nmake"
See [NOTE:115937.1]
for work around. RELATED DOCUMENTS ----------------- For Microsoft Visual C++, MKS Toolkit and
GNUMAKE support, you should contact their respective vendors Microsoft Visual C++, MKS Toolkit
and GNUMAKE are registered trademarks.
http://support.microsoft.com/ http://msdn.microsoft.com/ http://www.mks.com/
http://www.gnu.org/ Note:104010.1: Release 11i on NT: Software Requirements
Note:115937.1: GNU Make won't make on windows NT
Important:All the downloaded files from GNU makes web sites shall be put in a single folder called gnumake under c:\ .Try to search for config.bat file inside this folders just click and
run it.
Env path setting:
Try to search make.exe generated in c:\program files\mkstoolkit\mksnt and copy and paste it
c:\gnumake\MAKE-3.77\windebug and c:\gnumake\MAKE-3.77\winRel also paste both this paths in the
My Computers==>Properties==>Advanced==>Environment variables==>Path setting's
After all this check as follows from CMD mode.
1)execute make at c:\>
2)execute gnumake at c:\>
In win2000 it may return error messages or Target wrong ignore it.If it is on Win NT then it will return proper status.
Create Applmgr user in Win2000:
Create a Applmgr user account in win2000 .
Installation:
=============
What here you require is the Patience .
Load the START HERE CD and run the C:\> cd \cdrom\rapidwiz
For Test and Prod it will ask for the location of Appl_Top,Common_Top and Data_Top location. Mention there path and ensure if more than one installtion say eg.Vision and Test or Prod to check the Path in all the tab pages its corresponding values and path's.
In Vision Demo many of the Options are not propmted from the user.
It will then do the system checking for Host Name and other details.All the checking should have been passed or if failed it will mark it in RED cross mark.Rectify the mistake and then onceagain proceed or else you will have problem after installation.
The Installation time takes around 5 to 6 Hrs of time.
For info on Post installation or on Multi Node follow the pdf's i have mentioned above.
The most tedious of all is succesfully crossing the Apps system checking it does for all
installed products it requires without any failure.
The GNUMAKE configuration or steps were nowhere given and it was all our trail and error exp.
This is possibly the most elaborate steps to install Apps on Win. post for further help. email me at [email protected] or [email protected]
Rajeev. -
Having trouble connecting SQL Developer to database on LINUX machine
Having trouble connecting SQL Developer to database on LINUX machine
Hello,
I am trying to connect my windows 7 home premium machine to an oracle database 11g on a RedHat 5 machine using SQL Developer. i got this error message on SQL Developer
Status : Failure - Test failed :The Network Adapter could not establish the connection
on Linux
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 03-APR-2013 16:13:13
Uptime 7 days 22 hr. 16 min. 41 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/product/11.2.0/db_1/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.X.X.X)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "orc11g" has 1 instance(s).
Instance "orc11g", status READY, has 1 handler(s) for this service...
Service "orc11gXDB" has 1 instance(s).
Instance "orc11g", status READY, has 1 handler(s) for this service...
Service "orc11g_XPT" has 1 instance(s).
Instance "orc11g", status READY, has 1 handler(s) for this service...
The command completed successfully
LSNRCTL> and TNSPING
tnsping 172.x.x.x
TNS Ping Utility for Linux: Version 10.2.0.1.0 - Production on 11-APR-2013 14:32:17
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
/u01/app/oracle/product/11.2.0/db_1/network/admin/sqlnet.ora
Used EZCONNECT adapter to resolve the alias
Attempting to contact (DESCRIPTION=(CONNECT_DATA=(SERVICE_NAME=172.x.x.x))(ADDRESS=(PROTOCOL=TCP)(HOST=172.x.x.x)(PORT=1521)))
OK (0 msec)
[oracle@ltebilling ~]$Tnsnames.ora On Linux ,
ORC11G =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.x.x.x)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orc11g)
)Listner on Linux ,
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.x.x.x)(PORT = 1521))
)/ect/hosts Linux ,
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
172.x.x.x LTEBillingand there is no problem of ping linux from windows
Edited by: user11309581 on Apr 11, 2013 3:16 PMyes really i'm already enaple the port 1521 and SELINUX=disabled
[root@ltebilling ~]# /etc/init.d/iptables status
Table: filter
Chain INPUT (policy ACCEPT)
num target prot opt source destination
1 RH-Firewall-1-INPUT all -- 0.0.0.0/0 0.0.0.0/0
Chain FORWARD (policy ACCEPT)
num target prot opt source destination
1 RH-Firewall-1-INPUT all -- 0.0.0.0/0 0.0.0.0/0
Chain OUTPUT (policy ACCEPT)
num target prot opt source destination
Chain RH-Firewall-1-INPUT (2 references)
num target prot opt source destination
1 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0
2 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 255
3 ACCEPT esp -- 0.0.0.0/0 0.0.0.0/0
4 ACCEPT ah -- 0.0.0.0/0 0.0.0.0/0
5 ACCEPT udp -- 0.0.0.0/0 224.0.0.251 udp dpt:5353
6 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:631
7 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:631
8 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED
9 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:1521
10 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:22
11 REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-host-prohibitedbut from windows system when i'm try tnsping i got this error
C:\Windows\system32>tnsping orc11g
TNS Ping Utility for 64-bit Windows: Version 11.2.0.1.0 - Production on 11-APR-2
013 14:44:09
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
D:\app\ubai\product\11.2.0\dbhome_2\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 172.x.x
.x)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = orc11g))
TNS-12535: TNS:operation timed out
C:\Windows\system32> -
Copy database from linux to windows error
Hi,
I have my database on linux 4 as oracle 10g i want to copy it on windows xp oracle 10g. One option is to migrate using rman but both of them have same
format by
select * from V$DB_TRANSPORTABLE_PLATFORM
Microsoft Windows IA (32-bit) Little
Linux IA (32-bit) Littlei take cold backup of my database on linux and copy it to windows then edit pfile and mount the database now the issue to change the path of datafiles and log files
i am using
SQL> select * from v$logfile;
GROUP# STATUS TYPE
MEMBER
IS_
3 ONLINE
/home/oracle/oracle/product/10.2.0/oradata/orcl/redo03.log
NO
2 ONLINE
/home/oracle/oracle/product/10.2.0/oradata/orcl/redo02.log
NO
GROUP# STATUS TYPE
MEMBER
IS_
1 ONLINE
/home/oracle/oracle/product/10.2.0/oradata/orcl/redo01.log
NO
SQL> alter database rename file '/home/oracle/oracle/product/10.2.0/oradata/orcl/redo01.log' to 'D:\oracle\product\10.2.0\oradata\orcl\redo1.log';
alter database rename file '/home/oracle/oracle/product/10.2.0/oradata/orcl/redo01.log' to 'D:\oracle\product\10.2.0\oradata\orcl\redo1.log'
ERROR at line 1:
ORA-01511: error in renaming log/data files
ORA-01516: nonexistent log file, datafile, or tempfile
"/home/oracle/oracle/product/10.2.0/oradata/orcl/redo01.log"i know the original location '/home/oracle/oracle/product/10.2.0/oradata/orcl/redo01.log' doesn't exists but is there any way to solve it.
Thanks
umeshThanks for your help
SQL> ed
Wrote file afiedt.buf
1 CREATE CONTROLFILE REUSE DATABASE "ORCL" RESETLOGS ARCHIVELOG
2 MAXLOGFILES 16
3 MAXLOGMEMBERS 3
4 MAXDATAFILES 100
5 MAXINSTANCES 8
6 MAXLOGHISTORY 292
7 LOGFILE
8 GROUP 1 'D:\oracle\product\10.2.0\oradata\orcl\redo1.log' SIZE 50M,
9 GROUP 2 'D:\oracle\product\10.2.0\oradata\orcl\redo2.log' SIZE 50M,
10 GROUP 3 'D:\oracle\product\10.2.0\oradata\orcl\redo3.log' SIZE 50M
11 -- STANDBY LOGFILE
12 DATAFILE
13 'D:\oracle\product\10.2.0\oradata\orcl\system01.dbf',
14 'D:\oracle\product\10.2.0\oradata\orcl\undotbs01.dbf',
15 'D:\oracle\product\10.2.0\oradata\orcl\sysaux01.dbf',
16 'D:\oracle\product\10.2.0\oradata\orcl\users01.dbf',
17 'D:\oracle\product\10.2.0\oradata\orcl\example01.dbf'
18* CHARACTER SET WE8ISO8859P1
19 /
Control file created.
SQL> alter database open;
alter database open
ERROR at line 1:
ORA-01589: must use RESETLOGS or NORESETLOGS option for database openThis is error in log file
Errors in file d:\oracle\product\10.2.0\admin\orcl\udump\orcl_ora_3836.trc:
ORA-30012: undo tablespace 'UNDOTBS' does not exist or of wrong type
Thu Nov 05 13:35:09 2009
Error 30012 happened during db open, shutting down database
USER: terminating instance due to error 30012
ARC1 started with pid=18, OS id=3680
Thu Nov 05 13:35:10 2009
Errors in file d:\oracle\product\10.2.0\admin\orcl\bdump\orcl_pmon_2316.trc:
ORA-30012: undo tablespace '' does not exist or of wrong type
Thu Nov 05 13:35:10 2009
ARC0: STARTING ARCH PROCESSES COMPLETE
Thu Nov 05 13:35:10 2009
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no SRL' ARCH
Thu Nov 05 13:35:11 2009
Errors in file d:\oracle\product\10.2.0\admin\orcl\bdump\orcl_reco_2544.trc:
ORA-30012: undo tablespace '' does not exist or of wrong type
Thu Nov 05 13:35:11 2009
Errors in file d:\oracle\product\10.2.0\admin\orcl\bdump\orcl_smon_756.trc:
ORA-30012: undo tablespace '' does not exist or of wrong type
Thu Nov 05 13:35:11 2009
ARCH: Detected ARCH process failure
ARCH: Detected ARCH process failure
ARCH: Detected ARCH process failure
ARCH: STARTING ARCH PROCESSES
Thu Nov 05 13:35:11 2009
Errors in file d:\oracle\product\10.2.0\admin\orcl\bdump\orcl_psp0_2888.trc:
ORA-30012: undo tablespace '' does not exist or of wrong type
Thu Nov 05 13:35:11 2009
Errors in file d:\oracle\product\10.2.0\admin\orcl\bdump\orcl_lgwr_1320.trc:
ORA-30012: undo tablespace '' does not exist or of wrong type
Thu Nov 05 13:35:11 2009
Errors in file d:\oracle\product\10.2.0\admin\orcl\bdump\orcl_dbw0_4012.trc:
ORA-30012: undo tablespace '' does not exist or of wrong type
Thu Nov 05 13:35:11 2009
Errors in file d:\oracle\product\10.2.0\admin\orcl\bdump\orcl_mman_3728.trc:
ORA-30012: undo tablespace '' does not exist or of wrong typethanks -
Strange problem with automattic start database on linux
HI,
We have Redhat Version 4.(update )
or
Oracle Version 10.1.0.2.0
we followed instruction mention in documentation. ( 10gr2) for automatic startup database when linux system reboot.
after create above script and followed all mention point when we reboot our linux machine it is hang.
Problem>>>
when we reboot our linux system. it HANG !!!! nothing happen..
On enabling swap space [ok]
| cursor blinksir please tell me How can open my linux machine... please anybody give me any type of advice..
thank you very much.
nomini.Hi,
thank your for your help and reply
but i am not able to open my linux machine so how can i update my oracle startup script.
it is hang during booting time ( linux server)
actually what happen.
i made script and just for test i reboot my linux machine.
every thing goes fine but "oracle startup script" run it will hang !!!
i know it is something wrong with my oracle startup script.
but without open my linux box i cann't do anything.
so
i have to first FIX linux problem
then i FIX my oracle script problem
hope you reply and understand my problem
thank you very much
nomini -
Hello,
I need to be able to test some software changes against an Oracle 9i database running under Linux as this is an environment used by one of my customers.
I have tried downloading the zip files found at http://www.oracle.com/technology/software/products/oracle9i/htdocs/linuxsoft.html but if I try to open or download any of these files I receive an Error 404 Page Cannot Be Loaded.
This happens when using IE6 or when using GetRight.
Are the links to these files still valid? If not, where can I download Oracle 9i Database for Linux?I don't find any problems with these files and they are still available.
-
How to create a database on linux
Good day friends Oracle forum, I started with Linux and have installed on a linux server with the Oracle 10g installation wizard, now my question is how I believe the database in windows did so through the wizard and configure all linux data but do not know how Algueña can help me with this step.
Very gratefulHi,
Have you able to run DBCA successfully?
If not kindly post the LINUX version in which your have installed oracle and also confirm that you did not got any error during your installation. It seems that you have missing prerequisite rpm.
Thanks,
Karthik -
Oracle Audit Vault and Database Firewall implementaion
Dear All,
we are planning to implement Oracle Audit Vault and Database Firewall on 2 node 11g RAC/solaris10, please advise me to ahead in details
ThanksRecently purchased Audit Vault and Database Firewall
My question is with Audit Vault.
All of the documentation says that i need Oracle Linux 5.8 as part of the installation. We do not have any servers now that support 5.8 currently. When I check the HCL for Oracle Linux 5.8 i see only 4 Oracle servers that support this version
Sun Server X2-4
Sun Server X2-8
Sunfire X2270 M2
Sunfire X4470
The only two servers that are currently offer for purchase by Oracle are the X2-4 and X2-8 which are way overkill both in power and price for this application.
The X2270 M2 would fit nicely, but is no longer offered for sale. In it place is the X3-2 which would fit nicely, but it listed as supporting Oracle Linux 5.8. Oracle Linux 5.9 is supported on the X3-2.
My question is will Oracle Linux 5.9 or newer install to support Audit Vault? The documentation specifies Linux 5.8. Is this flexible or not?
Thanks, -
Install Portal and Database with modem turned off?
I am about to install Oracle Portal 9iAS with Oracle 8i database in a Win2000 PC. I have a cable internet connection that uses DHCP to dynamically assign IP and DNS addresses. Would DHCP be a problem? Should I make the installation with the modem turned off?
Thank you very much,
MelissaI installed Portal and Database on my machine at home which has both a public and private IP and there were NO problems doing it with the modem on and connected.
-
Separating ASM home and DATABASE home?
I just installed a new 2 node cluster on linux Itanium and I have configured my CLUSTERWARE_HOME and DATABASE_HOME. We are using ASM for our database storage and I had used dbca to create the ASM instances and when I ran the dbca to create the new ASM instance I used the dbca from the DATABASE_HOME.
I have been told that I should have created an additional home for the ASM instance? Is this correct and is this a best practice for RAC and ASM?
Everything is up and running fine and I and pondering if it is worth reconfiguring so that we can have a separate ASM home?
Is there a good doc out there concerning how to reconfigure the home for ASM once it is up and runnig and my database is currently utilizing it for it's storage?
I know that I would just have to lay down the binariies into a new directory but what alse needs to change? Will this affect how the ASM instances are registered with the clusterware?
What is the real benefit of having them separate? I have been told that you can patch then separately but I don't see the benefit as the db would have to be down anyhow if the ASM instance would need to be patched?
Any suggestions are greatly appreciated.
Thanks.Hi,
<< Oracle Documentation >>
Keep the following in mind when installing ASM:
When running more than one database instance on a single server or node, it is recommended that you install ASM in its own Oracle home on that server or node. This is advisable even if you are running only one database instance but plan to add one or more database instances to the server or node in the future.
With separate Oracle homes, you can upgrade and patch ASM and databases independently, and you can deinstall database software without impacting the ASM instance.
If an ASM instance does not already exist and you select the OUI option to install and configure ASM only, OUI installs ASM in its own Oracle home.
If you are running a single database instance on a server or node and have no plans to add one or more database instances to this server or node, ASM and the database can share a single Oracle home
If an ASM instance does not already exist and you select the OUI option to create a database that uses ASM for storage, OUI creates this single-home configuration.
Have a look at the following documents:
1) ML NOTE:265633.1 ASM Technical Best Practices
2) http://julian.dyke.users.btopenworld.com/com/Blog/2007_01_01_archive.html
3) http://www.dell.com/downloads/global/solutions/Oracle_DB_Deployment_with_Separate_ASM_and_Database_Home_Final_Web_Ready.pdf
4) http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/storeman.htm#i1021337
Maybe you are looking for
-
Follow Up to iMac G5 Crash n Burn
If you go here you will read of an issue my wife was having. We thought it was resolved and this is a follow up to that/those issues. In the end it was a defective hard drive. Which Apple replaced after confirming what Diskwarrior® had identified aft
-
How to print lever arch spine labels on HP Officejet Pro 8600
how do you print level arch spine labels on HP Officejet Pro 8600?
-
Account Assignment category -F
Dear Friends, what is the actual function of account assignment category -F (Order) I am purchasing Asset and inserting Account assignment cat- F (actualy this is wrong ,but clenit is saying that earlier MM consultant has suggested this, so i need to
-
Wish list: Voice recorder & address book
I would love to have a built-in voice recorder for recording memos. Doesn't seem that hard to do. I would also love to have an icon for the address book, a la OS X, instead of having to go through the phone icon. How about BlueTooth syncing? What oth
-
I book G4 1.42 1 Gig runs very slow on leopard
I just installed leopard on my I book G4. It now runs like death, dare I say like a bad PC. Even typing is often delayed. Many simple programs will not run at a decent speed or will slow down within ten minutes to an unacceptable speed. I also notice