9iAS Installation on HP Tru64 Cluster
We have sucessfully managed to install both the Infrastructure and middle-tier on a Tru 64 Cluster. The application (forms 9i) runs perfectly OK, however, we cannot get the report server to work. (report server called reportserver rather than rep_apollo)
We have a development environment, which is also running Tru64 which runs perfectly OK.
We have the osagent installed on an NT machine on the same sub-net, and works OK for development.
On the Cluster machine, if we go to the middle-tier's $ORACLE_HOME/vbroker4/bin directory and type osfind, nothing is found. If we set the environment variable OSAGENT_ADDR to the machine running the osagent, and then perform an osfind it works OK - we have therefore set the environment variable in the profile, reports.sh and rwengine.sh but still the reportserver does not register with the osagent
Is there any other file that we need to change for the reportserver engine to know where the osagent is ?
Thanks in advance
Richard,
We have also installed 9iAS on a non-clustered Tru64 box. Sometimes the reports server starts, mostly not the first time, stays up for no more than 24 hours and dies. We are using version 9.0.2.3 (fully patched) on Tru64 5.1a box.
I have logged numerous TARs but not getting andy real answers. The osfind problem you reported i believe is spurious because the osgaent we have running on a windows box as the Visibroker people never wrote it for Tru64, don't know if this is still the case for 9.0.4 which is only certified on 5.1b. If i issue the osfind on windows it's running!
We are going to try 9.0.4 on a windows 2000 box and if it works then we will go done that path. Personally i feel the problem is with 9iAS not communicating with the osagent on windows properly?
Regards,
Trent
Similar Messages
-
During the installation of grid infra(cluster) for Oracle 11.2 RAC one.
Good Day All, and thanks in advance…
During the installation of grid infrastructure(cluster) for Oracle 11.2 RAC One Node on AIX6.1 ( PROD) , ASM used. I am getting below errors when executing ./root.sh
Upon investigation ,I managed to get note: 1068212.1 from the support oracle site ( see below for details) . I might be hitting Unpublished bug 8670579. I also logged Severity 2 SR with Oracle support to get the bug/patch fix and no one has attended the call.
This might be configuration issue or otherwise , if you have experienced the same issue please assist ? ( if you need more logfiles please feel free to request)….
I ran the Cluster Verify Check – all passed.
Many Thanks
Ezekiel Filane
/u01/app/11.2.0/grid#./root.sh
Running Oracle 11g root.sh script...
The following environment variables are set as:
ORACLE_OWNER= grid
ORACLE_HOME= /u01/app/11.2.0/grid
Enter the full pathname of the local bin directory: [usr/local/bin]:
The file "dbhome" already exists in /usr/local/bin. Overwrite it? (y/n) [n]:
The file "oraenv" already exists in /usr/local/bin. Overwrite it? (y/n) [n]:
The file "coraenv" already exists in /usr/local/bin. Overwrite it? (y/n) [n]:
Creating /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
2010-10-19 10:33:11: Parsing the host name
2010-10-19 10:33:11: Checking for super user privileges
2010-10-19 10:33:11: User has super user privileges
Using configuration parameter file: /u01/app/11.2.0/grid/crs/install/crsconfig_params
Creating trace directory
User grid has the required capabilities to run CSSD in realtime mode
LOCAL ADD MODE
Creating OCR keys for user 'root', privgrp 'system'..
Operation successful.
root wallet
root wallet cert
root cert export
peer wallet
profile reader wallet
pa wallet
peer wallet keys
pa wallet keys
peer cert request
pa cert request
peer cert
pa cert
peer root cert TP
profile reader root cert TP
pa root cert TP
peer pa cert TP
pa peer cert TP
profile reader pa cert TP
profile reader peer cert TP
peer user cert
pa user cert
Adding daemon to inittab
CRS-4123: Oracle High Availability Services has been started.
ohasd is starting
CRS-2672: Attempting to start 'ora.gipcd' on 'csgipm'
CRS-2672: Attempting to start 'ora.mdnsd' on 'csgipm'
CRS-2676: Start of 'ora.gipcd' on 'csgipm' succeeded
CRS-2676: Start of 'ora.mdnsd' on 'csgipm' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'csgipm'
CRS-2676: Start of 'ora.gpnpd' on 'csgipm' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'csgipm'
CRS-2676: Start of 'ora.cssdmonitor' on 'csgipm' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'csgipm'
CRS-2672: Attempting to start 'ora.diskmon' on 'csgipm'
CRS-2676: Start of 'ora.diskmon' on 'csgipm' succeeded
CRS-2676: Start of 'ora.cssd' on 'csgipm' succeeded
CRS-2672: Attempting to start 'ora.ctssd' on 'csgipm'
Start action for daemon aborted
CRS-2674: Start of 'ora.ctssd' on 'csgipm' failed
CRS-2679: Attempting to clean 'ora.ctssd' on 'csgipm'
CRS-2681: Clean of 'ora.ctssd' on 'csgipm' succeeded
CRS-4000: Command Start failed, or completed with errors.
Command return code of 1 (256) from command: /u01/app/11.2.0/grid/bin/crsctl start resource ora.ctssd -init
Start of resource "ora.ctssd -init" failed
Clusterware exclusive mode start of resource ora.ctssd failed
CRS-2500: Cannot stop resource 'ora.crsd' as it is not running
CRS-4000: Command Stop failed, or completed with errors.
Command return code of 1 (256) from command: /u01/app/11.2.0/grid/bin/crsctl stop resource ora.crsd -init
Stop of resource "ora.crsd -init" failed
Failed to stop CRSD
CRS-2500: Cannot stop resource 'ora.asm' as it is not running
CRS-4000: Command Stop failed, or completed with errors.
Command return code of 1 (256) from command: /u01/app/11.2.0/grid/bin/crsctl stop resource ora.asm -init
Stop of resource "ora.asm -init" failed
Failed to stop ASM
CRS-2673: Attempting to stop 'ora.cssdmonitor' on 'csgipm'
CRS-2677: Stop of 'ora.cssdmonitor' on 'csgipm' succeeded
CRS-2673: Attempting to stop 'ora.cssd' on 'csgipm'
CRS-2677: Stop of 'ora.cssd' on 'csgipm' succeeded
CRS-2673: Attempting to stop 'ora.gpnpd' on 'csgipm'
CRS-2677: Stop of 'ora.gpnpd' on 'csgipm' succeeded
CRS-2673: Attempting to stop 'ora.gipcd' on 'csgipm'
CRS-2677: Stop of 'ora.gipcd' on 'csgipm' succeeded
CRS-2673: Attempting to stop 'ora.mdnsd' on 'csgipm'
CRS-2677: Stop of 'ora.mdnsd' on 'csgipm' succeeded
Initial cluster configuration failed. See /u01/app/11.2.0/grid/cfgtoollogs/crsconfig/rootcrs_csgipm.log for details
csgipm:/u01/app/11.2.0/grid#ps -ef | grep pmon
root 6160492 3932160 0 10:54:13 pts/2 0:00 grep pmon
more /u01/app/11.2.0/grid/log/csgipm/client/ocrconfig_5767204.log
csgipm:/usr/sbin#more /u01/app/11.2.0/grid/log/csgipm/client/ocrconfig_5767204.log
2010-10-19 10:33:14.435: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 4
2010-10-19 10:33:14.435: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 5
2010-10-19 10:33:14.435: [ OCRRAW][1]propriogid:1_1: Failed to read the whole bootblock. Assumes invalid format.
2010-10-19 10:33:14.435: [ OCRRAW][1]proprioini: all disks are not OCR/OLR formatted
2010-10-19 10:33:14.435: [ OCRRAW][1]proprinit: Could not open raw device
2010-10-19 10:33:14.442: [ default][1]a_init:7!: Backend init unsuccessful : [26]
2010-10-19 10:33:14.461: [ OCRCONF][1]Exporting OCR data to [OCRUPGRADEFILE]
2010-10-19 10:33:14.461: [ OCRAPI][1]a_init:7!: Backend init unsuccessful : [33]
2010-10-19 10:33:14.461: [ OCRCONF][1]There was no previous version of OCR. error:[PROCL-33: Oracle Local Registry is not configured]
2010-10-19 10:33:14.461: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 0
2010-10-19 10:33:14.461: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 1
2010-10-19 10:33:14.462: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 2
2010-10-19 10:33:14.462: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 3
2010-10-19 10:33:14.462: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 4
2010-10-19 10:33:14.462: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 5
2010-10-19 10:33:14.462: [ OCRRAW][1]propriogid:1_1: Failed to read the whole bootblock. Assumes invalid format.
2010-10-19 10:33:14.462: [ OCRRAW][1]proprioini: all disks are not OCR/OLR formatted
2010-10-19 10:33:14.462: [ OCRRAW][1]proprinit: Could not open raw device
2010-10-19 10:33:14.462: [ default][1]a_init:7!: Backend init unsuccessful : [26]
2010-10-19 10:33:14.462: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 0
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 1
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 2
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 3
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 4
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 5
2010-10-19 10:33:14.463: [ OCRRAW][1]propriogid:1_1: Failed to read the whole bootblock. Assumes invalid format.
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 0
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 1
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 2
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 3
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 4
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 5
2010-10-19 10:33:14.483: [ OCRRAW][1]ibctx: Failed to read the whole bootblock. Assumes invalid format.
2010-10-19 10:33:14.483: [ OCRRAW][1]proprinit:problem reading the bootblock or superbloc 22
2010-10-19 10:33:14.483: [ OCROSD][1]utread:3: Problem reading buffer 104fe000 buflen 4096 retval 0 phy_offset 102400 retry 0
2010-10-19 10:33:14.483: [ OCROSD][1]utread:3: Problem reading buffer 104fe000 buflen 4096 retval 0 phy_offset 102400 retry 1
2010-10-19 10:33:14.483: [ OCROSD][1]utread:3: Problem reading buffer 104fe000 buflen 4096 retval 0 phy_offset 102400 retry 2
2010-10-19 10:33:14.484: [ OCROSD][1]utread:3: Problem reading buffer 104fe000 buflen 4096 retval 0 phy_offset 102400 retry 3
2010-10-19 10:33:14.484: [ OCROSD][1]utread:3: Problem reading buffer 104fe000 buflen 4096 retval 0 phy_offset 102400 retry 4
2010-10-19 10:33:14.484: [ OCROSD][1]utread:3: Problem reading buffer 104fe000 buflen 4096 retval 0 phy_offset 102400 retry 5
2010-10-19 10:33:14.484: [ OCRRAW][1]propriogid:1_1: Failed to read the whole bootblock. Assumes invalid format.
2010-10-19 10:33:14.541: [ OCRAPI][1]a_init:6a: Backend init successful
2010-10-19 10:33:14.646: [ OCRCONF][1]Initialized DATABASE keys
2010-10-19 10:33:14.650: [ OCRCONF][1]Exiting [status=success]...Hi,
We are also trying to install 11.2.0.2 Grid infrastructure for Oracle RAC One Node on AIX 6.1. We did a POC in our lab environment and after much struggle got that working. Now we are building 4 clusters in the production environment and the first cluster installation failed while running root.sh on node2. We already have a Sev1 ticket open with Oracle Support but have not heard anything.
Here is root.sh output from node2. The two node names are p01dou416 and p01dou417.
CRS-4402: The CSS daemon was started in exclusive mode but found an active CSS daemon on node p01dou416, number 1, and is terminating
An active cluster was found during exclusive startup, restarting to join the cluster
Failed to start Oracle Clusterware stack
Failed to start Cluster Synchorinisation Service in clustered mode at /u01/app/11.2.0/grid/crs/install/crsconfig_lib.pm line 1020.
/u01/app/11.2.0/grid/perl/bin/perl -I/u01/app/11.2.0/grid/perl/lib -I/u01/app/11.2.0/grid/crs/install /u01/app/11.2.0/grid/crs/install/rootcrs.pl execution failed
[root@P01DOU417] /u01/app/11.2.0/grid #
LOG output: /u01/app/11.2.0/grid/cfgtoollogs/crsconfig/ rootcrs_p01dou417.log
2010-11-13 17:22:14: Successfully started requested Oracle stack daemons
2010-11-13 17:22:14: Starting CSS in clustered mode
2010-11-13 17:22:14: Executing cmd: /u01/app/11.2.0/grid/bin/crsctl start resource ora.cssd -init
2010-11-13 17:32:28: Command output:
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'p01dou417'
CRS-2672: Attempting to start 'ora.gipcd' on 'p01dou417'
CRS-2676: Start of 'ora.cssdmonitor' on 'p01dou417' succeeded
CRS-2676: Start of 'ora.gipcd' on 'p01dou417' succeeded> CRS-2679: Attempting to clean 'ora.cssd' on 'p01dou417'
CRS-2681: Clean of 'ora.cssd' on 'p01dou417' succeeded
CRS-2673: Attempting to stop 'ora.diskmon' on 'p01dou417'
CRS-2677: Stop of 'ora.diskmon' on 'p01dou417' succeeded
CRS-2673: Attempting to stop 'ora.gipcd' on 'p01dou417'
CRS-2677: Stop of 'ora.gipcd' on 'p01dou417' succeeded
CRS-2673: Attempting to stop 'ora.cssdmonitor' on 'p01dou417'
CRS-2677: Stop of 'ora.cssdmonitor' on 'p01dou417' succeeded
CRS-5804: Communication error with agent process
CRS-4000: Command Start failed, or completed with errors.
End Command output2010-11-13 17:32:28: Executing cmd: /u01/app/11.2.0/grid/bin/crsctl check css
2010-11-13 17:32:28: Command output:
CRS-4530: Communications failure contacting Cluster Synchronization Services daemon
End Command output2010-11-13 17:32:28: Checking the status of css
2010-11-13 17:32:33: Executing cmd: /u01/app/11.2.0/grid/bin/crsctl check css
2010-11-13 17:32:33: Command output:
CRS-4530: Communications failure contacting Cluster Synchronization Services daemon
End Command output2010-11-13 17:32:33: Checking the status of css
2010-11-13 17:32:38: CRS-2672: Attempting to start 'ora.cssdmonitor' on 'p01dou417'
2010-11-13 17:32:38: CRS-2672: Attempting to start 'ora.gipcd' on 'p01dou417'
2010-11-13 17:32:38: CRS-2676: Start of 'ora.cssdmonitor' on 'p01dou417' succeeded
2010-11-13 17:32:38: CRS-2676: Start of 'ora.gipcd' on 'p01dou417' succeeded
2010-11-13 17:32:38: CRS-2672: Attempting to start 'ora.cssd' on 'p01dou417'
2010-11-13 17:32:38: CRS-2672: Attempting to start 'ora.diskmon' on 'p01dou417'
2010-11-13 17:32:38: CRS-2676: Start of 'ora.diskmon' on 'p01dou417' succeeded
2010-11-13 17:32:38: CRS-2674: Start of 'ora.cssd' on 'p01dou417' failed
2010-11-13 17:32:38: CRS-2679: Attempting to clean 'ora.cssd' on 'p01dou417'
2010-11-13 17:32:38: CRS-2681: Clean of 'ora.cssd' on 'p01dou417' succeeded
2010-11-13 17:32:38: CRS-2673: Attempting to stop 'ora.diskmon' on 'p01dou417'
2010-11-13 17:32:38: CRS-2677: Stop of 'ora.diskmon' on 'p01dou417' succeeded
2010-11-13 17:32:38: CRS-2673: Attempting to stop 'ora.gipcd' on 'p01dou417'
2010-11-13 17:32:38: CRS-2677: Stop of 'ora.gipcd' on 'p01dou417' succeeded
2010-11-13 17:32:38: CRS-2673: Attempting to stop 'ora.cssdmonitor' on 'p01dou417'
2010-11-13 17:32:38: CRS-2677: Stop of 'ora.cssdmonitor' on 'p01dou417' succeeded
2010-11-13 17:32:38: CRS-5804: Communication error with agent process
2010-11-13 17:32:38: CRS-4000: Command Start failed, or completed with errors.
2010-11-13 17:32:38: Failed to start Oracle Clusterware stack
2010-11-13 17:32:38: ###### Begin DIE Stack Trace ######
2010-11-13 17:32:38: Package File Line Calling
2010-11-13 17:32:38: --------------- -------------------- ---- ----------
2010-11-13 17:32:38: 1: main rootcrs.pl 324 crsconfig_lib::dietrap
2010-11-13 17:32:38: 2: crsconfig_lib crsconfig_lib.pm 1020 main::__ANON__
2010-11-13 17:32:38: 3: crsconfig_lib crsconfig_lib.pm 997 crsconfig_lib::start_cluster
2010-11-13 17:32:38: 4: main rootcrs.pl 697 crsconfig_lib::perform_start_cluster
2010-11-13 17:32:38: ####### End DIE Stack Trace #######
2010-11-13 17:32:38: 'ROOTCRS_STACK' checkpoint has failed
Any help on this is appreciated.
Edited by: user12019257 on Nov 17, 2010 1:26 PM -
Oracle 9iAS installation question-oci.dll error
Hi all
I have a question about 9iAS installation. Can we install 9iAS in NT??. I downloaded from the site, installation for NT. While installing I get error like "could not write oci.dll error"..I'm installing the portal and wireless type and I have my Oracle9i database installed on the same machine. Can anybody suggest how to rectify this error.
Thanks a lotAre you trying to install in the same Oracle Home directory as the database? You should install in a different OH. Furthermore, 9iAS itself also installs in 2 OH's. You will end up with 3 OH's.
It is not a good idea to install the database and 9iAS on the same server, unless you have a really big one. -
Oracle 9i installation on Windows 2003 Cluster
Hi
I Need any good documentation for Oracle 9i installation on Windows 2003 Cluster.Complete Guide is here
http://download-uk.oracle.com/docs/cd/B19306_01/install.102/b14207/toc.htm -
How to install and configure management agents on Tru64 Cluster
We are busy rolling out the Oracle 10g Grid Control to our enterprise and one of our targets is a two-node Tru64 cluster with shared file systems, i.e., each node can see (read/write) the file systems concurrently. Trucluster software is responsible for the clustering management.
On node1 we have a set of databases each with its own dedicated listener; the same for node2. Each cluster managed service set has its own logical hostname. For example, we have on node1:
db1 (database)
listener-db1 (listener for db1)
node-db1 (logical hostname for db1 service)
Upon switchover or failover, the database and listener are brought up on node2 and we need to cater for this in our management agent configuration. I am trying to work out how we install and configure the management agents in such a configuration. Has anyone done this or does anyone know how to set up the agents suitably?
I have already installed the agent on one of the nodes - that worked fine, and I have even managed to start another agent up using the installed software home on the other node using "agentca -f"You the Cluster type of configuration. It is documented in the install guide you have
-
Error starting the 9iAS installer on Windows 2000 on P4 laptop
I am having problem running 9iAS Installer on my P4 Laptop.
any solution?Hi
I have successfully installed Oracle products in P4 hardware configuration and there is a know bug in Oracle & P4. Follow these steps below and I am sure that you will be successful in installing Oracle on P4.
Background:
When installing and configuring Oracle 8i to support a Syllabus Plus timetabling application on a Pentium 4 Server with Windows 2000 Advance Server, the following issues were encountered:
1. The Oracle 8i Universal Installer (OUI) aborts without notice
2. When installed using either the Oracle 9i OUI or the patched 8i OUI downloaded from Oracle Corporation, errors occurred during installation and java based configuration tools such as the Database Configuration Assistant and the Network Configuration Assistant would not run.
Problem Causes
Oracle Corporation have documented the following known issues:
1. The OUI 8.1.x fails to recognize the P4 processor and aborts without notice.
2. The OUI 8.1.x or above has problems on machines that use the Sun JRE and Symantec JIT. Windows 2000 (all versions) and Netware platforms are affected by this.
Work Around
The following work around has been used successfully at the Northern Territory University to overcome these problems.
1. Install Oracle 9i patched installer available from Oracle Technology Network website on the machine running on Pentium 4 Processor.
2. After installing Oracle Universal Installer, open file oraparam.ini and make the following modifications: (Assuming CD-ROM Drive is d: and you are installing Oracle from CD-ROM)
a. Change the Source= line to use the full path to the CD instead of relative path. (i.e. Source=d:\stage\products.jar)
b. Change the JRE_Location line to use the full path to the CD instead of relative path. (i.e. JRE_Location=d:\stage\components\oracle\swd\jre\1.1.7\1\datafiles\expanded)
c. Change the OUI_Location line to use the full path to the C drive (where the installer is installed) instead of relative path. (i.e. JRE_Location=c:\stage\components\oracle\swd\oui\1.6.0.9.0\1\datafiles\expanded)
d. Change the JRE_MEMORY_OPTIONS line to add -nojit as the first argument. (i.e. JRE_MEMORY_OPTIONS=-nojit ms16m ms32m) Other entries should remain same.
3. Launch OUI and this will use the modified oraparam.ini file and pick up the information from the CD-ROM. (since the absolute locations are specified)
4. Choose the custom install and choose not to create the database during the install. This way, the DBCA will not be launched during installation.
5. The Net8 Configuration assistant will still be launched and there is no way to suppress it. If you need to kill it due to installer hanging then in the configuration tools window highlight the Net8 Configuration Assistant and click Stop. If this does not work then look for the most recent JRE process using task manager and kill it manually. Note: The OUI itself will also have a jre process. Make sure to kill the only the most recent process.
6. After killing the configuration tool, continue through the installation to the End of Installation screen. We can modify the configuration tool to use this option nojit.
7. Once installation is complete, each of the following files in the ORACLE_HOME needs to be modified:
Each file will contain a command similar to the one following, which should be modified to include the option -nojit.
Eg: Command=(c:\program files\oracle\jre\1.1.7\bin\jrew nojit classpath.
a. assistants\dbca\dbassist.cl
b. assistants\dbma\dbmig.cl
c. assistants\ifa\ifa.cl
d. bin\owm.cl
e. ldap\oidamdin\oidadmin.cl
f. network\tools\netasst.cl
g. network\tools\netca.cl
h. owm\install\instelogin.cl
i. owm\install\instowm.cl
This (-nojit) is the only modification required to enable the configuration tools. After these changes the configuration tools like Net8CA and DBCA can be launched from the start menu.
Note: if your Oracle server is already installed and running but configuration tools are not running then just edit these files mentioned above (from a to i) and then launched configuration tools, they all will work.
Thank you
Amit -
Portal 9iAS installation package errors
All,
Upon Portal 9iAS installation, i get the following package errors. Are there some special database packages/objectsmission. We have installed intermedia text package, but still get errors.
can anyone help?
Errors for PACKAGE BODYWWSBR_IMT_SERVICES:
LINE/COL ERROR
291/7 PL/SQL:Statement ignored
291/20 PLS-00201: identifier 'CTX_DOC.PKENCODE' must be declared
293/8 PL/SQL: Statement ignored
293/21 PLS-00201: identifier 'CTX_DOC.PKENCODE' must be declared
ERROR: CTXSYS does not exist
ERROR: Cannot install InterMedia text options
PL/SQL procedure successfully completed.
SECOND ERROR:-
ctx_ddl.drop_preference('GLOBAL_LEXER');
ERROR at line 3:
ORA-06550: line 3, column 8:
PLS-00201: identifier 'CTX_DDL.DROP_PREFERENCE' must be declared
ORA-06550: line 3, column 8:
PL/SQL: Statement ignored
ORA-06550: line 7, column 36:
PLS-00201: identifier 'CTX_USER_PREFERENCES' must be declared
ORA-06550: line 7, column 15:
PL/SQL: SQL Statement ignored
ORA-06550: line 11, column 33:
PLS-00364: loop index variable 'I' use is invalid
ORA-06550: line 11, column 9:
PL/SQL: Statement ignored
Ctx_Ddl.Create_Preference ( 'GENERIC_BASIC_LEXER', 'BASIC_LEXER' );
ERROR at line 40:
ORA-06550: line 40, column 3:
PLS-00201: identifier 'CTX_DDL.CREATE_PREFERENCE' must be declared
ORA-06550: line 40, column 3:
PL/SQL: Statement ignored
ORA-06550: line 49, column 3:
PLS-00201: identifier'CTX_DDL.CREATE_PREFERENCE' must be declared
ORA-06550: line 49, column 3:
PL/SQL: Statement ignored
ORA-06550: line 50, column 3:
PLS-00201: identifier
'CTX_DDL.SET_ATTRIBUTE' must be declared
ORA-06550: line 50, column 3:
PL/SQL: Statement ignored
ORA-06550: line 51, column 3:
PLS-00201: identifier 'CTX_DDL.SET_ATTRIBUTE' must be declared
ORA-06550: line 51, column 3:
PL/SQL: Statement ignored
ORA-06550: line 52, column 3:
PLS-00201: identifier 'CTX_DDL.SET_ATTRIBUTE' must be declared
ORA-06550: line 52, column 3:
PL/SQL: Statement ignored
ORA-06550: line 60, column 3:
PLS-00201: identifier 'CTX_DDL.CREATE_PREFERENCE' must be declared
ORA-06550: line 60, column 3:
PL/SQL: Statement ignored
ORA-06550: line 61, column 3:
PLS-00201: identifier'CTX_DDL.SET_ATTRIBUTE' must be declared
ORA-06550: line 61, colu
regards, Matt.Jay,
We have now installed the Intermedia text option, but still get errors on the installation. (Portal version 3.0.8.9.8 NT).
After installation, we still get errors. These are generally "Synonym already exists" errors, even though we are starting with a blank database each time. The exact errors are.
"cannot create synonym wwctx_api_vpd for portal30_sso.wwctx_api_vpd name already used by an existing object"
"synonym owa_vpd_ctx, name already used by existing object"
We suspect these errors are causing the error message wwc-00000 to appear when we attempt to access the Login Server Administration page and create users.
Any ideas?
Regards, Matt. -
Hi,
I have a problem when I install 9i Database and 9iAS. I installed 9i Database 9.0.1 successfully on Windows/2000 Pro with SP1. Then I changed shared_pool_size to 125829120 and something needed for 9iAS. I used OUI v2.01 (from 9i Database) to install 9iAS 1.0.2.2. It's fine until configure Portal. It prompt error message of "The SHARED_POOL_SIZE is 32K less then demeand". BUT, the origin databse's initialization value for this parameter is already been changed to 125829120. I try to copy admin folder from 9i Database_Home to 9iAS Home to let 9iAS installer can find the init.ora.
Can some one help me to figure out what happen to it?
Thanks in advance!
Alex Luyou must have installed the Standard Edition, a midtier databsse
will be installed, mainly as a db cache. However, this databse
is not intented to be used as the backend databse and the using
of this as a backend databse is not supported by oracle. -
Hi,
I have successfully installed 9iDB on a Linux server and am now
attemting to install 9iAS on a different Linux server (both Red
Hat 7.1).
I am confused by the preinstallation section of the 9iAS
Installation guide.
Part way through the documentation it starts to talk about
the 'origin database' without ever mentioning where this
database has sprung from. Is this a database I need to create on
my 9i database server? If so how do I create it?
The documentation seems to imply that the database must already
exist as it's telling me I need to edit the initSID.ora file.
There is also some implication that this 'origin database' needs
to be 8i. If it does, should I install 8i on the database server
or on the AS server?
I'd really prefer to use the 9i database if possible. Not least
because I've got that on CD and would need to download 8i over
ISDN!!
I'm sure I'll have other questions as I get further into this,
but answers to the above will keep me quiet for a while!
Many thanks in advance for any help anyone can offer.
Tom Steele.The infrastructure install is available on the 9.0.2.0.1 CDs. Did you try and install 9.0.3 of 9iAS? 9.0.3 is only available for the midtier (application tier) install.
-
Changing DNS after 9iAS installation
Could anyone share with me how to change the DNS name (which starts with www) that shows the Oracle HTTP Server Components page when a browser is invoked to other desired web page (in which the DNS does not start at www)after the 9iAS installation.
Thank you.I am having difficulty understanding your sentence ... is it possible to give an example?
There is a ServerName directive in httpd.conf that you could change ... but without understanding the problem I don't want to recommend it. -
9iAS installation problem--not the same user
I had once interrupted my 9iAS installation, when I start installation again, OUI reports lack of query component. I tried to install it in a new oracle home path, aborted the installation, and copy the inventory folder to the original oracle home path. Then I install oracle in the original oracle home again, OUI gives error message of "All oracle9iAS in one host must be installed by the same user". How can I bypass this message and install 9iAS?
I just had that too. I deleted all Oracle installed directories (app server install directory and Program Files\Oracle) then deleted the registry key HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE and that problem goes away....
-
Setmgr.dll error during 9iAS installation
Hi all
I'm getting setmgr.dll could not move from xx location to yy location error during 9iAS installation. Has anyone faced the same problem?.
I just tried doing the Core Edition installation.
Any suggestion is appreciated..
ThanksI am encountering similar errors but much earlier and in a much higher number.
For me the problem starts at 62% completion of the linking process with
Error in invoking target install of makefile /ora/product/9.0.1/plsql/lib/ins_plsql.mk
and it continues
Error in invoking target install of makefile /ora/product/9.0.1/plsql/lib/ins_plsql.mk
Error in invoking target relink of makefile /ora/product/9.0.1/precomp/lib/ins_precomp.mk
etc.
As ins_?????.mk in fact is a makefile I am now trying to
cp ins_?????.mk makefile
and then type
make
Then something happens (watch the processes) that looks very much as if it links
and builds the libraries. Next I click on [Ignore].
But I am not sure yet whether this helps. Right now I am still in the process of
installing oracle.
Can anybody state on this?
Ciao, Toni -
Oracle 8.1.7/9iAS installation problem on IBM AIX 5.1 - loadext fails
Dear colleagues,
tried to install Oracle 8.1.7 and then Oracle 9iAS over AIX 5.1 on IBM eServer p-series. The installation fails in the very beginning - loadext for post-wait Kernel Extension (/etc/pw-syscall) fails with 'exec format error'. Documentation states 'AIX 4.3.3 or later required', no clear indication for AIX5, though. Any ideas or suggestions?
I understand, it is possible to roll back to AIX 4.3.3, although machine came with 5.1 pre-installed.
AlexeiI had the same problem and finally used the loadext program from the 64-bit cpio-archive (Disk1). Just replace the file and startover again.
It worked and still works!
Hope this helps. -
Domain problem still persists -9iAS installation on windows 2000 profto do?
Hi
I tried installing 9iAS rel 2 on Windows 2000 prof.
As per the pop-up during installation I did the changes. I did the changes as per the instructions. In the "hosts" file
c:\windows\system32\drivers\etc\hosts
I added
127.0.0.1 <my computer name>.WORKGROUP
So the resultant details in hosts file were
127.0.0.1 localhost
127.0.0.1 <my computer name>.WORKGROUP# my entry
IT DID NOT WORK THIS WAY TOO..
So I tried with a space instead of a "."
127.0.0.1 <my computer name> WORKGROUP# my entry
THIS ALSO DID NOT WORK..
Please help me.see original post :)
-
9i and 9ias installation on SuSE linux 7.3
Hi,
Are there any known issues involved in installation of 9i
and 9ias on SuSE linux 7.3 ??
Also please let me know what are the workarounds for those
problems and where the patches may be downloaded from ??
I am asking this question because SuSE 7.3 is not yet
certified by oracle.
Thanks,For the database, look at
http://www.suse.com/en/support/oracle/db/9i_73.html
Maybe you are looking for
-
Scratches on the bottom of my MacBook Pro
My own carelessness has unfortunately resulted in scratches on the bottom edges of my MacBook Pro. There is also a rather unsightly crack that has appeared from the top right hand corner where the charger connects to the middle section on the bottom
-
im trying to update my account info. when i press done it tells me to go to support
-
SQL command to select first record
I would like to create an SQL command to link two tables on a field so that only the first matching record is selected. What would be the syntax for that? Thank you.
-
Protect Not Registering and Can't Change Default Browser
Hi All I have bought a new Z10 and I am trying (hard) to like it as a replacement for my current iphone 4....... But what's stopping me at the moment is that: 1. I can't see my z10 on the Protect website (http://...) even after I have turned on the P
-
New Version Of Skype, Now Mic Doesn't Work
Skype has been bugging me daily to install the latest version. So I finally did, from that moment on my mic no longer works. I had JUST used my mic right before installing the latest skype version and it worked fine, I tried to make a local call, and