9iAS installation with 9i DB on same machine(Urgent)

Hi,
I have installed Oracle 9i on windows NT. The installation was successful. And am now trying to install Oracle 9iAS 1.0.2.2.1 on same machine.I have done all the necessary pre-installation tasks.
But as soon I run setup of disk 1 of 9iAS it gives error as =>
Dialogue box title: "SEVERE: Unable to verify iSuite Product Install Configuration"
And message is:
"Setup has detected that your iSuite Product Install has not been setup correctly, probably because the installation was aborted.
Please restart Setup."
The installation of Oracle 9i was successful and was not aborted in between or so.
Even if I restart the setup same errors comes.
I am not able to understand why this error is coming. Is it a problem related to the installer version? Has somebody come across such a problem? Please help. I need it quite urgently.
Thanks,
Pallavi.

Also make sure to check out the recently published whitepaper on Portal Center: (http://otn.oracle.com/portalcenter - item #2 in What's New in Portal?). Summary is listed below:
Step-by-step Guide for Installing Oracle9i EE (9.0.1.1.1), Oracle9i Application Server (1.0.2.2.2), and Oracle9iAS Portal (3.0.9.8.2) on Windows 2000
The guide takes you through the entire installation process in a clear, easy to understand manner. While designed for those with minimal Oracle-specific knowledge, it can also be quite useful for those who wish to quickly set up a stand-alone evaluation or test system using the default settings.

Similar Messages

32 bit coexist with 64 bity on same machine

Can Tuxedo 8.1 32-bit coexist with Tuxedo 8.1 64-bit, on same machine?

Absolutely.
Make sure that when you specify an installation directory, you use a name to explicitly define what you are installing For example, /opt/beahome/tuxedo81.32 and
/opt/beahome/tuxedo81.64. Developers can then set their TUXDIR to point at the right version, or you can build a link, /opt/beahome/tuxedo, to the version you want and then leave the TUXDIR alone.

FCP6 on Snow Leopard and Adobe CC on ML with GTX card in same machine?

Hello, I have a couple 5,1 Mac Pros in a post production environment running Snow Leopard and FCP6. We would like to upgrade to Adobe CC and take advantage of CUDA with GTX cards. However, we still need to be able to open/re-edit old FCP projects for a while.
FCP6 needs SL, while GTX cards need ML. My plan is to have each OS on separate HDDs and boot into the one we need at the time.
Problem with this: The 5,1s currently have 5770s which require one of the two 6-pin power connectors but the GTX cards need them both.
1. Is the best solution to open the case and switch which card is powered every time, depending on need?
2. Is it ok to leave the non-powered card in the PCI slot while doing this?
3. Is there a better solution to this problem?
Thanks for any help.

Separate machines if you can.
The whole "drivers" and how you can't use that GTX in SL... I can run Windows with any card because drivers are available.

CS4 Production Pro installation with Final Cut on same drive (mac)

Can the CS4 suite be installed and coexist with Final Cut Suite (not Final Cut X) on the same hard drive with mac os? Do not plan to open FCS apps while I am working on a project in CS4. Just want to see if I like the CS4 suite to make the transition from Final Cut Suite.
Will there be conflicts, bottlenecks, etc.
Thanks in advance.

no, I know that final cut pro 4 wont run on the macbook pro. I am wondering about the media files, capture scartch, quicktime etc. If I have final cut pro 5 on the macbook pro will it recognise those files and update them? Not the application itself but the files from the media created.
Basically I have projects I made in final cut 4 on the old system, that I want to work on in final cut 5 on the mac book pro. How do I do that?
sorry for being unclear.

Captivate 7 with other versions on same machine

Have a client running several versions of Adobe Captivate on a single machine including Ver 6. She would like to keep those on the machine for use with projects created on older versions. Would like to also install Captivate version 7. I am planning to install it and choose a new directory during the install. Are there any issues I should be aware of installing Ver 7 with these other versions in place?
Thanks...

Hello,
Welcome to Adobe Forums!
Yes you can install multiple version of Captivate on Single computer.
But make sure that you also upgrade the computer according to the systems requirements of Adobe Captivate 7 so that you won't run into any memory related issues , like slow performance etc. .
http://www.adobe.com/products/captivate/tech-specs.html
Thanks and Regards
Himanshu Satija

Can Always On Availability Group co-exist with mirroring on the same machine

So imagine 2 server Server A and Server B hosting database A and Database B.
Database A Principal resides on Server A uses AOAG to create a replica on Server B.
Database B Principal resides on Server A and uses Mirroring to create a replica on Server B.
Is this type of topology possible or sensible?
Given that AOAG requires windows clustering and the listner is used for the DNS.

Hello,
I think this may be a common misconception amongst DBAs that they will co-exist.
Do you have any evidence that they can't co-exist? I certainly don't agree with your very strong statement of it being a "common misconception" when it hasn't been proven as such and can, in fact, work.
When you access AOAG, you only point the DNS to th eAOAG listener and when the failover occurs the AOAG listner automatically moves to the mirror server. So the IP address assosiated with the DNS automatically changes. This is not the concept in
mirroring where the IP remains same and failover is done via "failover partner"
You're making the assumption that you would setup mirroring to use the AG listener when in fact it would not be logical to do so as you'd have the issue you noted above. Instead you'd use the normal instance address which would not have a problem with what
you've just described.
So how will mirroring work when the IP assosiated with the DNS alias of SQL server itself changes
Again, you're assuming incorrectly that you'd use the AG listener for Mirroring. However, to give your question an example, you let DNS do the heavy lifting. For example, if there were a multi-subnet cluster just using WSFC and SQL Clustering the IP address
would change but the DNS lookup should point correctly, thus mirroring would still work just as it did (assuming the failover was successful, etc). That's just a single example.
I wonder if MS has some official documentation.
I highly doubt it since they deprecated mirroring.
The one ISSUE I could see arise would be that there can only ever be a single mirroring endpoint and I believe that could become a bottleneck just as it would with mirroring depending on how much AG and mirroring traffic was attempted to be pushed through
it.
Sean Gallardy | Blog |
Twitter

How to share iPhoto with other accounts in same machine

If I have a lot of pictures in iPhoto in my IMAC and want to be able to share with my wife when she login in as her. Is that possible. Thanks.

What version of iPhoto do you have?
The easiest and most reliable method is to move the Library to an external Hard Disk and point her iPhoto and yours at it.
Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
5. Then, in each account, Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Choose Library' and select the Library on the External.
Remember only one person can open the Library at a time.
Regards
TD

Keeping CS4 webpremium with CS6 Design on same machine

Subject says it all.... I have CS4 WebPremium installed on my Mac. We have purchased a CS6 Design Standard and I want to essentially, keep the DreamweaverCS4 on my machine so I don't want to remove CS4 web.
Can I have both versions installed w/o losing the CS4?

Yes.
For most Adobe software, different versions install into their own separate folder on your hard drive.
I have CS4, CS5 and CS6 happily co-existing.

Converting 9ias installation with infrastructure to standalone version

I have a 9ias web server which runs OC4J applications that was installed against an infrastructure server and which uses that server via OID to connect to the oracle databases.
The infrastructure server was to be used to administer SSO but this is no longer required. Is it possible to remove the link between the 9ias web server and the infrastucture and turn it into a standalone version ? If so how do I do it ?.
Regards,
Chris

dcmctl LeaveFarm

CAN I INSTALL BOTH (ORACLE 9IAS AND ORACLE DATABASE )INTO SAME MACHINE.

oracle 9ias and oracle 9i database in same machine Feb 25, 2003 11:22 PM
Reply
Dear Friends,
I installed oracle 9ias. and then i hosted my form,report into that server . All was working properly.
at this time my database was into another machine.
then i installed oracle 9i database into the same machine
(as the oracle 9ias was installed)
at the instalation of oracle 9i database one error comes
and shows that Agent configuration Assistant Installation
fail.
but After installation of database it work properly.
there is no problem.
but when I try to run from through web(by using oracle 9ias)
it gives Internal error(500).
i check and find that my appache server for 9ias is working properly and in services of windows 2000 no error comes.
HOW CAN I INSTALL BOTH (ORACLE 9IAS AND ORACLE DATABASE )INTO SAME MACHINE.
With regards
Siddharth Singh
[email protected]

Hi James,
Have u ever tried ORACLE 9iAS R2 on Redhat Linux ?
If yes what is the version of RH Linux you were using ?
Any docs for that ?
[email protected]
Regards
Amudharasu

Issue while installing TimesTen on the same machine as the Oracle DB.

Hi,
I am new to the TimesTen(TT) and facing the issue of installing TimesTen on the same machine as the Oracle DB(this is our project requirement ). I am trying to install on Solaris 32bit machine with 64GB RAM. When i installed only TT there is no issue. But I am not able to installed if I installed Oracle DB and after that I installed TimesTen on same machine.
Further if I tried to installed the TT with less size i.e.128MB along with oracle DB on same machine it installed successfully . But when i tried TimesTen with 16GB size it doesn't installed successfully along with oracle DB. Also, I tried to installed only TimesTen with size 16GB it installed without any error.
Could you please let me know what could be the possible reason for the above behavior.
Also i read in some threads in the same forum mentioning that "it is not recommend to installing TimesTen on the same machine as the Oracle DB as they can contend for resources (memory and CPU). Could you please elobrate more on this what kind of issues can possibly occur in this kind of scenario.
Please let me know in case more information is required.
Thanks in advance !!!
Regards,
Sanjay

Can you please explain what you mean by 'install' in this context? Memory size is not an installation time option with TimesTen. It sounds to me like you mean 'am not able to configure a TimesTen database to use xxx MB/GB of memory' rather than 'unable to install TimesTen'?
With a 32-bit operating system the largest TimesTen database you will be able to create is 2 GB. If you need a larger TimesTen database then you need to run 64-bit TimesTen on a 64-bit OS.
It general it really isn't a good idea to run TimesTen on the same machine as the Oracle database. Perhaps you can share what your overall objectives are? WHat are you looking to achieve by using TimesTen? If we understand that we can give better advice.
Chris

 Ps installation on two different boot volumes of same machine?  Ps 11.0.2 Mac PPC  and then...

Hello, I'm new to this forum.
My goal here is to have two different Photoshop 11.0.2 installations on two different boot volumes of one and the same Power Mac (PPC) G5 Quad, one being a Tiger 10.4.11 system and the other one a Leopard 10.5.8 system, for the purpose of installing two different modalities of the same Epson Photo Stylus 2200 printer, one with the printer set to use the photo black ink cartridge for luster and glossy papers, and the other one using the matte blank ink.
This is because I prefer to simply change the startup disk when switching inks rather than having to delete and re-add the necessary printers. (This particular printer does not support ink cartridge switching under any version of Mac OS X.)
Photoshop is currently only used on this one machine. Obviously this intended scheme fits well within the EULA conditions.
My three questions are:
(a) whether there is any technical issue I have failed to consider,
(b) whether each copy of Photoshop on the same machine will have to be activated separately (in other words, is the activation tied to the CPU or to the boot volume drive?), and
(c) if the answer to the latter question is yes, whether this will count as one or two activations for purposes of later installing a single instance of the Photoshop 13.x ("CS6") upgrade on an Intel- MacBook, since obviously C6 will not run on my PPC Mac. Again in sum, will I be able to continue to run Photoshop 11.0.2 on two different volumes of the same PPC machine and the Photoshop 13.x upgrade on the laptop?
As further explanation, I would use Photoshop 13.x on the Mac-Intel laptop only in order to run ACR 7.x, but would keep my PPC G5 Quad as my photo editing and printing machine running Photoshop 11.0.2, since an upgrade of my desktop machine to a comparably powerful Mac Pro is simply not an option for both financial and technical reasons (the Classic environment is essential).
Any and all input and guidance will be appreciated.
Message was edited by: station_one

Thank you for the lightning-fast response—and on a Sunday morning too!
MichaelKazlow wrote:
…Is it technically a violation, that is something I'd leave Adobe to answer.
From my previous visits to other forums as a lurker, I was under the firm impression you were in fact an Adobe employee, Mr. Kazlow. I hope that is still the case and you are only referencing your participation in these user-to-user forums as a volunteer, not as an official representative of the corporation.
Much obliged.

Multiple installs of SAM on the same machine

I am trying to install SAM for DEV and QA environments on the same server by doing separate installs.
Has anyone tried to install multiple instances of SAM on the same machine? I've run into errors where the 2nd install will not recognize a new directory server for the policy/configuration settings.
Any help is greatly appreciated!

Post Author: sliese
CA Forum: General
I run Crystal 2008, 11, and 10 on the same machine.I teach in labs with Crystal 11, 10, 9 and 8.5 on the same machine.I have never run into any problems.

Installing Oracle 9i Database and 9iAS on the same machine

I have read conflicting comments about this. Will Oracle 9i and 9iAS work if installed on the same server ?
I have seen a note before that the ORACLE_HOME will conflict if done.
However, for 8i it has been stated "the OAS does not seem to conflict with the Oracle 8i database, so select the default ORACLE_HOME to install".
Can you give me the diffinitive answer for 9i for this.
Many Thanks

I performed the installation and used a different Oracle_Home and had no issues. Now configuring Portal was another story...

Can i run 9ias versions 1 and 2 on the same machine

i need to install 9ias versions 1 and 2 on the same machine but in separate databases, is this possible? if it is possible are there any issues that i need to be aware of?

You can install the portable Firefox 3.6.x version to access websites that do not work with Firefox 5+.
*http://portableapps.com/apps/internet/firefox_portable#legacy
*http://portableapps.com/apps/internet/firefox_portable/localization#legacy36
*Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
*Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html

9iAS installation with 9i DB on same machine(Urgent)

Similar Messages

Maybe you are looking for