9iAS installation

Hi,
I have a problem when I install 9i Database and 9iAS. I installed 9i Database 9.0.1 successfully on Windows/2000 Pro with SP1. Then I changed shared_pool_size to 125829120 and something needed for 9iAS. I used OUI v2.01 (from 9i Database) to install 9iAS 1.0.2.2. It's fine until configure Portal. It prompt error message of "The SHARED_POOL_SIZE is 32K less then demeand". BUT, the origin databse's initialization value for this parameter is already been changed to 125829120. I try to copy admin folder from 9i Database_Home to 9iAS Home to let 9iAS installer can find the init.ora.
Can some one help me to figure out what happen to it?
Thanks in advance!
Alex Lu

you must have installed the Standard Edition, a midtier databsse
will be installed, mainly as a db cache. However, this databse
is not intented to be used as the backend databse and the using
of this as a backend databse is not supported by oracle.

Similar Messages

Oracle 9iAS installation question-oci.dll error

Hi all
I have a question about 9iAS installation. Can we install 9iAS in NT??. I downloaded from the site, installation for NT. While installing I get error like "could not write oci.dll error"..I'm installing the portal and wireless type and I have my Oracle9i database installed on the same machine. Can anybody suggest how to rectify this error.
Thanks a lot

Are you trying to install in the same Oracle Home directory as the database? You should install in a different OH. Furthermore, 9iAS itself also installs in 2 OH's. You will end up with 3 OH's.
It is not a good idea to install the database and 9iAS on the same server, unless you have a really big one.

Error starting the 9iAS installer on Windows 2000 on P4 laptop

I am having problem running 9iAS Installer on my P4 Laptop.
any solution?

Hi
I have successfully installed Oracle products in P4 hardware configuration and there is a know bug in Oracle & P4. Follow these steps below and I am sure that you will be successful in installing Oracle on P4.
Background:
When installing and configuring Oracle 8i to support a Syllabus Plus timetabling application on a Pentium 4 Server with Windows 2000 Advance Server, the following issues were encountered:
1.     The Oracle 8i Universal Installer (OUI) aborts without notice
2.     When installed using either the Oracle 9i OUI or the patched 8i OUI downloaded from Oracle Corporation, errors occurred during installation and java based configuration tools such as the Database Configuration Assistant and the Network Configuration Assistant would not run.
Problem Causes
Oracle Corporation have documented the following known issues:
1.     The OUI 8.1.x fails to recognize the P4 processor and aborts without notice.
2.     The OUI 8.1.x or above has problems on machines that use the Sun JRE and Symantec JIT. Windows 2000 (all versions) and Netware platforms are affected by this.
Work Around
The following work around has been used successfully at the Northern Territory University to overcome these problems.
     1.     Install Oracle 9i patched installer available from Oracle Technology Network website on the machine running on Pentium 4 Processor.
     2.     After installing Oracle Universal Installer, open file oraparam.ini and make the following modifications: (Assuming CD-ROM Drive is d: and you are installing Oracle from CD-ROM)
     a.     Change the Source= line to use the full path to the CD instead of relative path. (i.e. Source=d:\stage\products.jar)
     b.     Change the JRE_Location line to use the full path to the CD instead of relative path. (i.e. JRE_Location=d:\stage\components\oracle\swd\jre\1.1.7\1\datafiles\expanded)
     c.     Change the OUI_Location line to use the full path to the C drive (where the installer is installed) instead of relative path. (i.e. JRE_Location=c:\stage\components\oracle\swd\oui\1.6.0.9.0\1\datafiles\expanded)
     d.     Change the JRE_MEMORY_OPTIONS line to add -nojit as the first argument. (i.e. JRE_MEMORY_OPTIONS=-nojit ms16m ms32m) Other entries should remain same.
     3.     Launch OUI and this will use the modified oraparam.ini file and pick up the information from the CD-ROM. (since the absolute locations are specified)
     4.     Choose the custom install and choose not to create the database during the install. This way, the DBCA will not be launched during installation.
5.     The Net8 Configuration assistant will still be launched and there is no way to suppress it. If you need to kill it due to installer hanging then in the configuration tools window highlight the Net8 Configuration Assistant and click Stop. If this does not work then look for the most recent JRE process using task manager and kill it manually. Note: The OUI itself will also have a jre process. Make sure to kill the only the most recent process.
6.     After killing the configuration tool, continue through the installation to the End of Installation screen. We can modify the configuration tool to use this option nojit.
     7.     Once installation is complete, each of the following files in the ORACLE_HOME needs to be modified:
Each file will contain a command similar to the one following, which should be modified to include the option -nojit.
Eg: Command=(c:\program files\oracle\jre\1.1.7\bin\jrew nojit classpath.
     a.     assistants\dbca\dbassist.cl
     b.     assistants\dbma\dbmig.cl
     c.     assistants\ifa\ifa.cl
     d.     bin\owm.cl
     e.     ldap\oidamdin\oidadmin.cl
     f.     network\tools\netasst.cl
     g.     network\tools\netca.cl
     h.     owm\install\instelogin.cl
     i.     owm\install\instowm.cl
This (-nojit) is the only modification required to enable the configuration tools. After these changes the configuration tools like Net8CA and DBCA can be launched from the start menu.
Note: if your Oracle server is already installed and running but configuration tools are not running then just edit these files mentioned above (from a to i) and then launched configuration tools, they all will work.
Thank you
Amit

Portal 9iAS installation package errors

All,
Upon Portal 9iAS installation, i get the following package errors. Are there some special database packages/objectsmission. We have installed intermedia text package, but still get errors.
can anyone help?
Errors for PACKAGE BODYWWSBR_IMT_SERVICES:
LINE/COL ERROR
291/7 PL/SQL:Statement ignored
291/20 PLS-00201: identifier 'CTX_DOC.PKENCODE' must be declared
293/8 PL/SQL: Statement ignored
293/21 PLS-00201: identifier 'CTX_DOC.PKENCODE' must be declared
ERROR: CTXSYS does not exist
ERROR: Cannot install InterMedia text options
PL/SQL procedure successfully completed.
SECOND ERROR:-
ctx_ddl.drop_preference('GLOBAL_LEXER');
ERROR at line 3:
ORA-06550: line 3, column 8:
PLS-00201: identifier 'CTX_DDL.DROP_PREFERENCE' must be declared
ORA-06550: line 3, column 8:
PL/SQL: Statement ignored
ORA-06550: line 7, column 36:
PLS-00201: identifier 'CTX_USER_PREFERENCES' must be declared
ORA-06550: line 7, column 15:
PL/SQL: SQL Statement ignored
ORA-06550: line 11, column 33:
PLS-00364: loop index variable 'I' use is invalid
ORA-06550: line 11, column 9:
PL/SQL: Statement ignored
Ctx_Ddl.Create_Preference ( 'GENERIC_BASIC_LEXER', 'BASIC_LEXER' );
ERROR at line 40:
ORA-06550: line 40, column 3:
PLS-00201: identifier 'CTX_DDL.CREATE_PREFERENCE' must be declared
ORA-06550: line 40, column 3:
PL/SQL: Statement ignored
ORA-06550: line 49, column 3:
PLS-00201: identifier'CTX_DDL.CREATE_PREFERENCE' must be declared
ORA-06550: line 49, column 3:
PL/SQL: Statement ignored
ORA-06550: line 50, column 3:
PLS-00201: identifier
'CTX_DDL.SET_ATTRIBUTE' must be declared
ORA-06550: line 50, column 3:
PL/SQL: Statement ignored
ORA-06550: line 51, column 3:
PLS-00201: identifier 'CTX_DDL.SET_ATTRIBUTE' must be declared
ORA-06550: line 51, column 3:
PL/SQL: Statement ignored
ORA-06550: line 52, column 3:
PLS-00201: identifier 'CTX_DDL.SET_ATTRIBUTE' must be declared
ORA-06550: line 52, column 3:
PL/SQL: Statement ignored
ORA-06550: line 60, column 3:
PLS-00201: identifier 'CTX_DDL.CREATE_PREFERENCE' must be declared
ORA-06550: line 60, column 3:
PL/SQL: Statement ignored
ORA-06550: line 61, column 3:
PLS-00201: identifier'CTX_DDL.SET_ATTRIBUTE' must be declared
ORA-06550: line 61, colu
regards, Matt.

Jay,
We have now installed the Intermedia text option, but still get errors on the installation. (Portal version 3.0.8.9.8 NT).
After installation, we still get errors. These are generally "Synonym already exists" errors, even though we are starting with a blank database each time. The exact errors are.
"cannot create synonym wwctx_api_vpd for portal30_sso.wwctx_api_vpd name already used by an existing object"
"synonym owa_vpd_ctx, name already used by existing object"
We suspect these errors are causing the error message wwc-00000 to appear when we attempt to access the Login Server Administration page and create users.
Any ideas?
Regards, Matt.

9iAS Installation Question

Hi,
I have successfully installed 9iDB on a Linux server and am now
attemting to install 9iAS on a different Linux server (both Red
Hat 7.1).
I am confused by the preinstallation section of the 9iAS
Installation guide.
Part way through the documentation it starts to talk about
the 'origin database' without ever mentioning where this
database has sprung from. Is this a database I need to create on
my 9i database server? If so how do I create it?
The documentation seems to imply that the database must already
exist as it's telling me I need to edit the initSID.ora file.
There is also some implication that this 'origin database' needs
to be 8i. If it does, should I install 8i on the database server
or on the AS server?
I'd really prefer to use the 9i database if possible. Not least
because I've got that on CD and would need to download 8i over
ISDN!!
I'm sure I'll have other questions as I get further into this,
but answers to the above will keep me quiet for a while!
Many thanks in advance for any help anyone can offer.
Tom Steele.

The infrastructure install is available on the 9.0.2.0.1 CDs. Did you try and install 9.0.3 of 9iAS? 9.0.3 is only available for the midtier (application tier) install.

Changing DNS after 9iAS installation

Could anyone share with me how to change the DNS name (which starts with www) that shows the Oracle HTTP Server Components page when a browser is invoked to other desired web page (in which the DNS does not start at www)after the 9iAS installation.
Thank you.

I am having difficulty understanding your sentence ... is it possible to give an example?
There is a ServerName directive in httpd.conf that you could change ... but without understanding the problem I don't want to recommend it.

9iAS installation problem--not the same user

I had once interrupted my 9iAS installation, when I start installation again, OUI reports lack of query component. I tried to install it in a new oracle home path, aborted the installation, and copy the inventory folder to the original oracle home path. Then I install oracle in the original oracle home again, OUI gives error message of "All oracle9iAS in one host must be installed by the same user". How can I bypass this message and install 9iAS?

I just had that too. I deleted all Oracle installed directories (app server install directory and Program Files\Oracle) then deleted the registry key HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE and that problem goes away....

Setmgr.dll error during 9iAS installation

Hi all
I'm getting setmgr.dll could not move from xx location to yy location error during 9iAS installation. Has anyone faced the same problem?.
I just tried doing the Core Edition installation.
Any suggestion is appreciated..
Thanks

I am encountering similar errors but much earlier and in a much higher number.
For me the problem starts at 62% completion of the linking process with
Error in invoking target install of makefile /ora/product/9.0.1/plsql/lib/ins_plsql.mk
and it continues
Error in invoking target install of makefile /ora/product/9.0.1/plsql/lib/ins_plsql.mk
Error in invoking target relink of makefile /ora/product/9.0.1/precomp/lib/ins_precomp.mk
etc.
As ins_?????.mk in fact is a makefile I am now trying to
cp ins_?????.mk makefile
and then type
make
Then something happens (watch the processes) that looks very much as if it links
and builds the libraries. Next I click on [Ignore].
But I am not sure yet whether this helps. Right now I am still in the process of
installing oracle.
Can anybody state on this?
Ciao, Toni

Oracle 8.1.7/9iAS installation problem on IBM AIX 5.1 - loadext fails

Dear colleagues,
tried to install Oracle 8.1.7 and then Oracle 9iAS over AIX 5.1 on IBM eServer p-series. The installation fails in the very beginning - loadext for post-wait Kernel Extension (/etc/pw-syscall) fails with 'exec format error'. Documentation states 'AIX 4.3.3 or later required', no clear indication for AIX5, though. Any ideas or suggestions?
I understand, it is possible to roll back to AIX 4.3.3, although machine came with 5.1 pre-installed.
Alexei

I had the same problem and finally used the loadext program from the 64-bit cpio-archive (Disk1). Just replace the file and startover again.
It worked and still works!
Hope this helps.

Domain problem still persists -9iAS installation on windows 2000 profto do?

Hi
I tried installing 9iAS rel 2 on Windows 2000 prof.
As per the pop-up during installation I did the changes. I did the changes as per the instructions. In the "hosts" file
c:\windows\system32\drivers\etc\hosts
I added
127.0.0.1 <my computer name>.WORKGROUP
So the resultant details in hosts file were
127.0.0.1 localhost
127.0.0.1 <my computer name>.WORKGROUP# my entry
IT DID NOT WORK THIS WAY TOO..
So I tried with a space instead of a "."
127.0.0.1 <my computer name> WORKGROUP# my entry
THIS ALSO DID NOT WORK..
Please help me.

see original post :)

9i and 9ias installation on SuSE linux 7.3

Hi,
Are there any known issues involved in installation of 9i
and 9ias on SuSE linux 7.3 ??
Also please let me know what are the workarounds for those
problems and where the patches may be downloaded from ??
I am asking this question because SuSE 7.3 is not yet
certified by oracle.
Thanks,

For the database, look at
http://www.suse.com/en/support/oracle/db/9i_73.html

9IAS Installation Failed giving errors.

I tried to install 9IAS Enterprise Edition(Release : 1.0.2.2.2a) from CD(three)
but all the times getting error as:
"Error while installing Report Server part tutil60.ins(33):File not found while
copying file c:\Oracle\806\CAUPREFS.ORA"
and after ignoring this error in the last part of installation in Configuration
Tools following services gives me error:
1. Oracle Database Cache Configuration Assistant (Failed)
Reason shown-- class not found: Oracle.cache.wta.WtaConfigApp
2.Oracle Portal 3.0 Configuration Assistant (Failed)
Reason Shown--
c:/Document_setting/ashwani/Locals....\Temp>REM
c:/Document_setting/ashwani/Locals....\Temp>REM $ Header:launch.bat@@main/6\
I just want to make use of Oracle Report Server Services from this 9IAS.So is
it necessary to install full 9IAS Enterprise Edition.
If only Report server services is to be installed then
A)what all services are required along with report server like for example
WebDB Listener and all?
B)Where should I place my Reports RDF files on this server?
C)What URL I have to pass to call the report from web/browser? like previously
for Report server 6i, I am passing the following URL:
http://fap02.:7778/dev60cgi/rwcgi60.exe?server=Rep60_FAP02&report=test.rdf&useri
d=scott/tiger@test&destype=cache&desformat=HTML

Did you have the Photoshop Beta installed? If yes, then you need to uninstall that one before you can install the trial.
Does your account have sufficient privileges? If not, you might need to log in as Admin.
Run the install again.
If the error recurs, then run CS Cleaner Tool and remove all products.
Reinstalling after that, should resolve the problem. Get the Cleaner tool here: http://www.adobe.com/support/contact/cscleanertool.html
Let us know how it goes.

9iAS Installation memory error

I am trying to install Oracle 9iAS on Linux (RH7.2), but the installation stops with the error "You must have at least 256 MB RAM installed on this machine to install Oracle9iAS Unified messaging"
I don't understand, "this machine" has 512 MB. Is this error referring to a different memory probem?
Louis

Never mind. The problem was caused by an incorrect oracle_home. Strange error message though...
Louis

9iAS installation problems w/ db cache and Portal

I am still trying for a succesful installation of the 9ias software. I have followed all of the suggestions that have been posted and I am now getting TNS cannot resolve service name during the database cache part of the install. I checked services and it seems that this install didn't set up a TNSListener service for the 9iSuites home? I set the oracle_sid = icache as it instructs in the appendix, set the o7_dictionary_accessibility = true, and renamed the spfile to a .txt file so Oracle wouldn't find it. Subsequent to the database cache errors, the Portal install can't find the database either. I'm frustrated because I had the server up and running succesfully with an 8.1.7 db and I'm trying to switch to 9iDB. Any help would be greatly appreciated! My boss is getting a little impatient.
Thanks.

Mark,
I was succesful on my 4th try. This is what I did differently and I'm not sure what triggered success.(a preface: database cache was not succesful but portal was). After install of db I followed these suggestions before install of 9ias(plus others offered by Tao Fan in a previous post:
in the init.ora file:
set o7_dictionary_accessibility=true(this is an o, not 0)
comment out the 'dispatchers' line.
rename the spfile in the <oracleHome>\database directory(i changed mine to xspfile.txt). Make sure you restart the db after any changes to the init.ora file. Set all oracle services to manual and disable the http server. Stop all services.
Start your install. Mine hung at 100% complete with a command window open. Before I closed the command window I started the database service but not the listener. The install proceeded to fail during the db cache and portal install. I exited out of the install, started the dbTNSlistener, and any iSuitesagent services(not sure if this helped but I'm happy now!)Then, I restarted the machine. Then start/programs/iSuites/portalConfigAssistant and it worked.
If none of this makes sense I can email you the documentation I kept while installing.

Forms Services and 9iAS Installation iisues

I need to use 9iAS and Forms and Report services only for my application. IS Portal a requirement for this. Is there a way that I could install the 9iAS core edition and then selectively install only Forms and Report Service?
Any help would be welcome.
Thanks
Arul

I need to use 9iAS and Forms and Report services only for my application. IS Portal a requirement for this. Is there a way that I could install the 9iAS core edition and then selectively install only Forms and Report Service?
Any help would be welcome.
Thanks
Arul Arul,
No, you cannot just install Forms and Reports without Portal and Wireless. You can however, stop the services that you don't need to use after installation.
HTH,
Ashesh Parekh
Oracle9iAS Product Management

9iAS installation

Similar Messages

Maybe you are looking for