9iAS Linux - ADMN 100999 - configuration tools aborted
Hi
I installed on SUSE Linux 8.0 the 9iAS R2, only the option A - J2EE and WebChache. Now I have following problems.
1. Some configuration tools (OC4J, OPMN, DCM)were not initialized in the end of the installation. I read other postings with the same problems, but i never read a solution of these problems.
2. After installing, i want to start the http server manually (dctml start -ct ohs) , but it doesn't work. I got the error message ADMN 100999. dctml -resyncInstance was not successful.
Other admins has same problem, they reset the admin password and it worked.
But I can not use the script resetiAspassword.sh because I never installed the infrastructure.
If i want to start the http-server with enterprise manager (EM worked) I got an EMException.
I have no idea to resolve the problems, perhaps you
Thank You
Hello Diana, i am having the same exact problem except it is on rh7.2. my initializations were also a problem: i have emctl but not dcmctl and therefore cannot run http. i am convinced i need to de-install/wipe clean/re-install. u r lucky because u r runninng on suse 8. u may consider de-install/re-install. i am going to wipe the directory clean this time becaue i have already tried de-install/re-install many times. thanx, david brown. webitplanet.com.
Similar Messages
-
ADMN-100999 (Very urgent)
I have installed 9iAS R2 on RH Linux 7.2. The installation of infrastructure remained successful except OC4J instance configuration assistant. The installation of Forms(Mid tear) also remained almost successful but opmn failed giving the message partial success 4 of 5 succeeded.
After installing I checked forms sever it was working perfectly. but when i restarted dcmctl failed giving message ADMN-100999. I saw the log file, it contains oracle.ias.repository.schema.schemaexception
Unable to connect to Directory Server:javax.naming.CommunicationException
The steps I followed were
1. Started listner (Successfull)
2. Started Database (Successfull)
3. oidmon start (Successfull)
4. oidctl instance=1 server=oidldapd start (Successfull)
I am installing on Xeon 2.4, 40 GB hdd, 1 GB ram, 2 GB swap space.
Somebody please help me out.
ZulqarnainTell us which opmn.log contains the error. (infra o middle?)
Ldap in your infrastructure is not working properly or is stopped. Perhaps the middle tier tries to make a connection to ldap on a wrong port. try netstat -tlp to see the ports and tcpdump to see which port dcmctl is tring to connect to.
The defaults is 4032. Also if the OC4J_Das is running.
ciao Aure -
ADMN-100999, oracle.ons.SubscriptionException when dcmctl start
The power of the Oracle 9iAS Release 9.0.2.0.1 on Linux machine went off and got this error while starting ' fsck failed, root file system is mounted read only...'. So we repaired it and remounted in read-write mode.
Now when I start dcmctl start in infra server, I get the error ADMN-100999, oracle.ons.SubscriptionException: Subscription requests timed out after 30000ms.
Please help..This looks like password mismatch problem.
try to reset your ias_admin password in OID using
$ORACLE_HOME/bin/resetiASpasswd.sh script
USAGE="resetiASPasswd.sh username password ORACLE_HOME" -
Service Configuration Tool (svc) for Archlinux
Hello, I'm providing you with a very simple Service Configuration Tool for the management of system services (scripts located inside /etc/rc.d).
DOWNLOAD LINK: http://aur.archlinux.org/packages.php?ID=30660
Usage:
svc DAEMON subcommand
DAEMON = name of the service to manage
subcommand = subcommand to pass to the service (e.g. start)
Example (DAEMON=samba):
svc samba enable
svc samba disable
svc samba configure
It acts as a wrapper for services and provides a mechanism for enabling (starting and adding the daemon to /etc/rc.conf) and disabling (stopping and removing the daemon from /etc/rc.conf) them. The tool does not constrain your subcommands to only enable and disable, any other service subcommand should act as expected (the value of this subcommand is passed to the rc.d script directly).
By its own, the script doesn't do much. It is with the help of a shell with a completion system (like zsh or recent versions of bash) that you can get the full benefits of it. For example, I only have to type "svc <TAB>" and all available system services will be available for completion, once a service is typed, it's subcommands (start, stop, restart, etc) will be available for completion too, along with enable and disable.
Other feature I integrate into some rc.d scripts is the subcommand "configure", which simply calls an editor with the service configuration file (e.g. vim /etc/samba/smb.conf). By combining this and the "svc" tool I can easily configure some services (the ones that make sense, apache is not a good candidate for this since it's got many configuration files): "svc samba configure".
This was done for two reasons: 1) I used opensolaris for over a year and a half, and when I switched back to linux there was a utility I really missed: "svcadm" (actually, the whole SMF is what I miss, but such a complete/beautiful init framework/service management replacement won't make it into gnu/linux any time soon); 2) As a system administrator, it's daunting to have to type "/e<TAB>/r<TAB>.<TAB>/$SERVICE_NAME $SUBCOMMAND" when I need to manage a service, it's much more pleasant to simply write "svc <TAB> $SERVICE_NAME $SUBCOMMAND" ($SERVICE_NAME and $SUBCOMMAND show options for completion when pressing <TAB>).
Along with the "svc" script, a script for the zsh completion system is provided. Please contact me if you have an implementation for bash.
Enjoy,
Edgar Merino
Last edited by bimbo (2009-10-08 01:53:58)bimbo wrote:
You could easily get rid of those premade functions and integrate the functionality inside the _svc script:
In the "svc()" function, for every option of the switch (case) statement, prefix the calls to the rc.d scripts with "sudo", e.g. "sudo ${SERVICES_DIR}/$1 start". If you want to constrain completion options for services to only "( start stop restart)", remove the "enable" and "disable" bindings defined in the "svc()" function and modify the "_svc()" function (notice the underscore) like this:
_svc() {
case $CURRENT in
2) # Show services under /etc/rc.d for completion
_services
3) # Show current service subcommands for completion
# This is here so that _init_d works on the service name rather
# than on the actual function name "svc"
(( CURRENT-- ))
shift words
# CONSTRAIN COMPLETION OPTIONS TO ONLY start, stop and restart
compadd start stop restart
esac
So, would I have to call it via _svc $DAEMON start or something similar, then? -
Error startup dcmctl - ADMN-100999
Hello Guys,
Before this it works fine. After i change the ip address of the server it give me this error when i try to startup
ADMN-100999
See base exception for details.
Base Exception:
java.lang.NullPointerException:null
See base exception for details.
See base exception for details.
Root Cause: null
java.lang.NullPointerException
at oracle.ias.sysmgmt.persistence.PersistenceManager.getPersistenceFarm
Unknown Source)
at oracle.ias.sysmgmt.persistence.PersistenceManager.updateOnsConfig(Un
nown Source)
at oracle.ias.sysmgmt.task.TaskMaster.initRepository(Unknown Source)
at oracle.ias.sysmgmt.task.TaskMaster.<init>(Unknown Source)
at oracle.ias.sysmgmt.task.InstanceManager.sysInit(Unknown Source)
at oracle.ias.sysmgmt.task.InstanceManager.init(Unknown Source)
at oracle.ias.sysmgmt.cmdline.DcmCmdLine.execute(Unknown Source)
at oracle.ias.sysmgmt.cmdline.DcmCmdLine.main(Unknown Source)After i change the ip address of the server it give me this error when i try to startupNot so much information... AS version ? OS ?
Did you execute chgiphost script ? (chgiphost.sh on Linux/Unix). -
Oracle 8i Configuration Tools Fails on Install
I found problems on the Oracle 8i Installation, on my Windows XP Desktop (SP1). I've selected the Minimal Installation, and all goes on. When they reach the Configuration Tools Section of Setup...
It found the following fails:
- Net8 Configuration Assistant, fail:
Class not found: Files\Oracle\Ora81\network\jlib
- Oracle Database Configuration Assistant, fail:
There is no available output for this tool.
Apparently, it doesn't create the Starter Database (my main need). I'm newbie in Oracle Database world (I'm MS-SQL Server DBA), so, if anyone can help me, I'll be glad...
Thanks,
RafaelPlease turn on the debug trace in tip.properties
Since we want to see why B2B did not start, we want to have as much trace as possible. Please set the following (in tip.properties)
b2b.oracle.tip.DiagnosticLevel = DEBUG
oracle.tip.LogType = text
If there is an exception in also should be logged in /home/oracle/MTProd/opmn/logs/B2B~B2BServer~MTProd.helenab2b.helenachemical.com~1
Please gather as much trace information as possible when you start the B2B Server manually.
If opmn is not started, use the 'opmnctl start' command in $ORACLE_HOME/opmn/bin
Then use the following command to start B2B:
opmnctl startproc process-type=B2BServer
Thanks,
Eng -
ID: How to use the test Configuration tool
Hi all,
I have done one simple file2file scenario and it is working fine( source file is reaching the destination).
By using this scenario, i would like to know the use of test configuration.( which is in Integration Directory).
I have given the input parameters what it has asked.
Header details:-
sender service,sender message interface and namespace.
payload:-
xml format( taken from message mapping)
log result:-
Sender Agreement
Internal Error
HTTP connection to ABAP Runtime failed. Error: 403 Forbidden URL: http://xxxxx:8000/sap/xi/simulation?sap-client=000 User: XIDIRUSER
Please help me how to work with this tool.
Regards,
Deviprasad.hi deviprasad...even i face the same problem whenever i tried using test configuration tool...
i think it means...its trying to make a connection : HTTP connection to ABAP Runtime ......which fails due to lack of proper authorization...
if u login to ur integration builder with a user having the proper authoriztion(i dont know exactly)...u can do the test..... coz during the test there is a connection between java and abap stack...
pls rectify me and convey me if u get the proper answer....or if i m wrong..
pls try to do use the test after login to IB through a user with maximum authorization.... -
Dynamic Configuration Tool Issues
Hi,
Has anyone run into issues with the cisco dynamic configuration tool? I recently noticed I cannot customize the hardware I am trying to configure. This was not like this in the past.Hi Laurence,
According to your description, you are creating a SQL Server Reporting Services report using SSAS cube as the data source, there are 40 parameters in the MDX query, so the performance is poor, right?
In your scenario, you said that 10 of the parameters using existing function, so you suspect that the issue can be caused by the existing function. Based on my research, it seems that the existing function is not a problem. Only issue is that use existing
function together with nonempty function, please refer to the link below to see the detail information about it.
http://cwebbbi.wordpress.com/2009/03/31/existing-and-nonempty/
In additional, I'd suggest you enable SQL profiler to monitor the queries fired by the query, once you find some queries took a very long time to run, consider creating the smaller cube partition or optimizing the query by adding index or partition
to improve the query performance. Here are some links about performance tuning.
http://www.bidn.com/blogs/DustinRyan/bidn-blog/2636/top-3-simplest-ways-to-improve-your-mdx-query
http://blogs.msdn.com/b/azazr/archive/2008/05/01/ways-of-improving-mdx-performance-and-improvements-with-mdx-in-katmai-sql-2008.aspx
http://www.packtpub.com/article/query-performance-tuning-microsoft-analysis-services-part1
Hope this helps.
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support -
So we just got a new Macbook and I also installed the apple configurator tool. I'm using it to prepare the iPads for deployment and it won't let me prepare them? It gets an error stating "retrieving iOS info from apple" then it stops and says "internet error". My Internet connection is fine with the Mac-book. It shows the iPad is listed under the Prepare logo up top as 1 but under supervise none are shown. Although it does show itself in iTunes. Also the profile I created is fresh and has no errors. We have tryed nearly everything I cna think of and online forums are not giving us to much info on this error.
A wag at this. A port issue?
"Apple Push Notification network setup
When MDM servers and iOS devices are behind a firewall, some network configuration may need to take place in order for the MDM service to function properly. To send notifications from an MDM server to Apple Push Notification service, TCP port 2195 needs to be open. To reach the feedback service, TCP port 2196 will need to be open as well. For devices connecting to the push service over Wi-Fi, TCP port 5223 should
be open."
http://www.google.com/url?sa=t&rct=j&q=ports%20ios%20configure%20ipad&source=web &cd=1&ved=0CC0QFjAA&url=http%3A%2F%2Fimages.apple.com%2Fipad%2Fbusiness%2Fdocs%2 FiOS_MDM.pdf&ei=5lXGUPCcJMXx0gH2wYG4BA&usg=AFQjCNFzINvs7ktT-6o6Q_l4Qk2HkpjtCA&ca d=rja
google: ports ios configure ipad
Try it on your home network where there isn't a lot of 'controls' -- network filtering , firewalls, etc.
Robert -
OCS 2007 R2 Response Group Configuration Tool Failure
Hello there.
We are bringing back to life an old OCS installation. Customer performed a clean AD reinstall and we are in the process of re-installing OCS 2007 R2. All seems to work fine, except the RGS. When accessing the web tool we get this error:
Response Group Configuration Tool Failure
An unknown error occurred. The operation cannot complete successfully. Please contact the administrator if this problem persists.
Click here to return Home.
the Event viewer for application on the FE shows:
Event code: 3005
Event message: Excepción no controlada.
Event time: 13/05/2014 12:13:01 p.m.
Event time (UTC): 13/05/2014 06:13:01 p.m.
Event ID: a74ea242095f4e8099bca266a7a5cc83
Event sequence: 8
Event occurrence: 1
Event detail code: 0
Application information:
Application domain: /LM/W3SVC/1/ROOT/Rgs-1-130444779241580315
Trust level: Full
Application Virtual Path: /Rgs
Application Path: C:\Program Files\Microsoft Office Communications Server 2007 R2\Web Components\Acd Files\
Machine name: OCSR2-FE02
Process information:
Process ID: 6504
Process name: w3wp.exe
Account name: domain\RTCComponentService
Exception information:
Exception type: COMException
Exception message:
Request information:
Request URL: https://ocspool.domain.com:443/Rgs/Deploy/Default.aspx
Request path: /Rgs/Deploy/Default.aspx
User host address: 172.16.6.32
User: domain\user
Is authenticated: True
Authentication Type: Negotiate
Thread account name: domain\RTCComponentService
Thread information:
Thread ID: 9
Thread account name: domain\RTCComponentService
Is impersonating: False
Stack trace: en System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
en System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext()
en System.Management.ManagementObjectCollection.get_Count()
en Microsoft.Rtc.Acd.Management.OcsApplicationContactSetting.Select(String condition)
en Microsoft.Rtc.Acd.Web.UI.WorkflowTemplate.GetContactObject()
en Microsoft.Rtc.Acd.Web.UI.WorkflowTemplate.AddedControl(Control control, Int32 index)
en ASP.deploy_default_aspx.__BuildControl__control15(Control __ctrl)
en Microsoft.Rtc.Acd.Web.UI.TemplateHelper.InstantiateWorkflowTemplate(AcdWorkflow workflow, ITemplate template, ControlCollection controlsToAddTo, String resourceClass, String templateResourcePrefix)
en Microsoft.Rtc.Acd.Web.UI.AcdWorkflowList.CreateChildControls()
en System.Web.UI.Control.EnsureChildControls()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Custom event details:
on the OCS logs I have:
Unhandled exception occurred in the Response Group Service Configuration Tool. The operation could not complete successfully.
Requested URL: /Rgs/Deploy/Default.aspx
User / Host making the Request: domain\user/ 172.16.6.32
Unhandled exception: System.Web.HttpUnhandledException - Se produjo una excepción de tipo 'System.Web.HttpUnhandledException'.
Inner Exception: System.Runtime.InteropServices.COMException
Cause: An unhandled exception occurred.
Resolution:
Check the exception.
Windows server is installed in spanish, if you wonder why the mix in languages.
We have been battling with this error for the last 2 weeks. Any help is greatly appreciated!
FRHi,
Please check the configuration of the Response Group Service with the help of the link below:
http://technet.microsoft.com/en-us/library/dd441277(v=office.13).aspx
Please check the OCS components that are required to implement the Response Group Service below:
Application Server and Response Group Service
Language pack
Administrative tools
Web Components Server
Internet Information Services
Microsoft Office Communicator 2007 R2
You can try to use the workflows that you crated to validate the deployment.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
SQL Server Configuration Tools Disappeared
I know I used to have Server Configuration Tools, but when I just looked for it, it seems like it has disappeared. I'm looking at this.
I'm getting this login error.
I used to be able to reset SQL Server using the Configuration Tools, but now I can't reset it, and I can't login.
Please help!!
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.Hello,
When you connect using SSMS ( SQL server management studio) in server name give like
hostname\mssqlserver--if it is default instance
hostanme\instancename if it is named instance
hostname\SQLEXPRESS is it is express edition
now go to run tyoe services.msc look for SQL server services check if it starte dor not if not please start in try connection using above information
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
Test Configuration Tool: Sender Agreement Not Found
Hi, All:
We have new XI3.0 setup and I just want to test simple file to file scenario, but the file was picked up by sender file adapter, however, there is no message sent to Integration server.
When I use Test Configuration Tool, the sender agreement is green, however, it also mention Sender Agreement Not Found, see below:
================================================
Sender Agreement
================================================
futhermore, Interface Mapping is not found either. Actually, Interface has been created on IR. Sender Agreement also created in ID.
Anyone who has idea about these two errors ?
Thanks in advance
LiangHi, Raj and Srinivas:
Thanks for your reply.
First of all, all the objects are activated, secondly, when create sender agreement, I just need to input the Sender Service Name / Sender Interface / Sender Interface Namespace. Then finally select commnication channel.
For any Receiver sides, they are grey out, I am not able to input anything.
So, there is no "*" in any fields.
I doubt if there is any setup wrong, especially for adapter engine, maybe some modules that are not functional for file adapter engine, since I also see other problems, I might post them as separate thread.
In Adapter monitor page, I did not see the adapter.
In RWB, if I use IE, there is Error in the page, using Firefox, it is OK.
Thanks And Regards !
Liang -
Install Oracle 9i in Redhat 7.1 hangs at Configuration Tools
I have upgraded the binutil to binutil-2.10.91.0.4-1. Everything seems fine until Configuration Tools. The Oracle Net Configuation Assistant shows in progress status and did not completed. In the detail box, it shows Running Listener Control
/u01/app/oracle/product/9.0.1/bin/lsnrctl start LISTENER.
Any idea?
Thanks,
EdHi, I had the same problem. But I don't think its a serious problem at all.
What I did was, stop the Net Configuration, so that it can carry on with configuring the Apache web server, followed by database creation. Only after the database was created successfully, then restart the Net Configuration again. It should work after database configuration.
Cheers. -
Do any one can expalin me about the configuration tool and give any link for guide line purpose
Hi,
http://help.sap.com/saphelp_nw04/helpdata/en/fb/f69f3f12e1eb0ce10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/2f/f79f3f12e1eb0ce10000000a114084/frameset.htm
Template Configuration Tool
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/dc68ec90-0201-0010-cd85-de89a636a663
Regards,
Prateek -
Hi,
I tried to use Configuration Tool for VPN. When I open a *.vpn file the program says:
Impossible to reach temp folder.
I'm using Win7.
Can you help me, please?
ThanksHey serenc2, Welcome to the Nokia Forums!
Have you tried viewing this link which can help you to configure your VPN on Configuration Tool?
You can also try do the following steps to fix the problem:
Disconnect the USB cable and connect it again.
If you use a USB hub with an external power source, verify it has been switched on.
If you use a USB hub, try connecting the phone directly to the computer.
Inspect the USB cable for problems and replace if necessary.
Ensure that you are using an original Nokia cable and the correct cable type for your phone.
Verify that you have selected PC Suite USB mode in the phone.
Disconnect the cable, reboot the computer, and try again.
Note; The connection problems may occur if you have previously unplugged USB devices without using the system tray utility for ejecting devices.
Also if a working connection suddenly stops working you can try to repair it using the functionality existing in Nokia Configuration Tool
Start > Programs > Nokia > Nokia Configuration Tool 6.0 > Uninstall > Repair Nokia Configuration Tool.
This option fixes missing or corrupt files, shortcuts and registry entries.
OR
Go to Add/Remove programs on Control panel (called Programs in Windows 7).
Select Nokia Configuration Tool installation and click Change/Remove.
From the dialog choose Repair.
I hope this has helped!
Sheldrick
Press the 'Accept As Solution' icon if I have solved your problem, Kudos my post if my advice has helped you!
Maybe you are looking for
-
Photoshop CC 2014 Bridge CC: automated tasks missing
I Have downloaded the new Photoshop CC 2014 and updated to Bridge CC. I am no longer able to run automated tasks from Bridge in Photoshop because the "photoshop" submenu is no longer available under tools- unistalling en reinstalling brings no avail.
-
Can't hide the content in a text msg!! Help??
Each time I receive a new text msg it is open for anyone to see! I turned on the passcode feature but then I have to unlock it each time I want to do anything on my phone! If someone is talking on my phone for example, and I get a text msg, all that
-
Suspending Service Temporarily and Using a Local Sim
I had a question about using my Unlocked iPhone 4S Abroad. I am currently with Verizon on a contract and I was going to temporarily suspend my service for a month's time while I am on a work trip to Europe- since I will not be using the service in th
-
Desktop software has stopped working
See error message below: 10:54:15.775|FATAL|1|Exception|0|Fatal Error System.TypeInitializationException: The type initializer for 'System.Windows.Media.FontFamily' Upon launch of 6.0, the error occurs with this note: Blackberry Desktop Software has
-
Newbie Flex Question about ComboBox in DataGrid
Heya! Just downloaded Flex today and pleasantly surprised at how cool it is. Can any of you fine gents and girls help me out? Why doesn't this give me an editable column in my data grid?