9ias post infrastructure installation problem

1-I install Infrastructure (9ias release 2) on win2000 server & it has a DNS on it,At the end of the installation it gives me that installation is done succesfully
2-after I login to the Enterprise manager website I found 9ias partially up but I tried with each component till it's fully up
3-I tried to login to the Oracle Internet directory using the oracle directory manager but it gives me the following error(bind of request to LDAP server failed)
So what to do since also I can't install Business intelligence 9ias since it needs to connect to oracle internet directory

Before re-install verify this error:
Passwordjavax.naming.CommunicationException: amilsys.ansun-nt.com:4032.
The installer couldn't connect to the OID, is it running?.
If you thing it is running then try the following in the repository iasdb.
select * from ods.ods_process
You should se the info about the oidserver. Look for a
-p parameter that indicates the port, you should see 4032, otherwise that is the problem, some times it is started on port 389.
If it's not installed then verify if port 4032 is free or is used by some other process.
If it was installed byt not working then try to start oidserver.
Carlos

Similar Messages

Oracle 9iAS infrastructure installation problem

Hello
I am installing oracle 9i infrastructure on my new windows 2000 box with 1GB RAM and no oracle product preinstalled. in the end of installation process, some processes fail:
infrastructure instance configuration assistant
oracle 9i application server randomize password
single sign on config assistance
infrastructure mod-osso config assistance
OPMN config assistance
log file says:
Configuration failed for IAS
IAS Instance creation failed
Configuration failed for JAZN
JAZN configuration failed: unable to establish a directory context.
Configuration succeeded for IASProperty
Configuration failed for IAS
Configuration failed for JAZN
and then SSO etc services dont start. can somebody please tell me how to fix this.
ashish

no. i had nothing installed over windows 2000 when i started installing oracle9i infrastructure.
the route problem(the point i could look into) is that the directory server(ldap) is not started during installation. is there any way we can reconfigure and start directory server after installation? as there is ssocfg.bat and ssoreg.bat for single sign-on..
ashish

Oracle infrastructure installation problem

hello everybody
I am new to Oracle OID SSO configuration ,i want to use the concept of SSO in my project.
i followed the OIM Disk1 and Disk2 for windows installer from the following link
http://onlineappsdba.com/index.php/2007/12/27/install-oidsso-1014-oas-infrastructure/
but i was not successful for the installation
please guide me to install it.
i have followed all the step from the above link.
if any body have successfully configure it please guide me with the link and with the installer file.
regards
Sandy

thanks for the your information.
i have problem in selecting different intallation type.when i start the installer i get these screen
1.wel-come screen
2.select the dir for the Oracle_home and path.screen
3 click the final install button screen .(as in doc it is 12th or 13th screen).
i do not get option to select different component of Oracle infrastructure.
is there any problem in my download.
i have download the windows X86 cd1 and cd2 from the link which you have given.(1.2GB) i hope i have done the right.
i want to configure the Oracle infrastructure for Windows OS.
regrads
Sandy

Fusion middleware Infrastructure installation problem

Hi , i am new to Oracle fusion middleware 12c and trying to download and configure Fmw, WLS and BI Publisher ,
the problem im facing is when ever i download fmw_12.1.3.0.0_infrastructure_Disk1_1of1.zip from OTN ( as im a free user there ) i cant unzip it ,
winrar breaks the operation by saying this message : Checksum errror in fmw_12.1.3.0.0_infrastructure_Disk1_1of1.jar ,file is corrupt ,
dont know what to do ,
i download it again n again from OTN but got same error , here i am using Windows 7 64 bit , JDK 1.8.0_25 , and already install oracle database 11g
and my download location is : Oracle Enterprise Repository Management Downloads
Under this heading : Prerequisites & Recommended Install Process

Hi,
Could you please use checksum to check the integrity of the file "fmw_12.1.3.0.0_infrastructure_Disk1_1of1.zip" and also check if the file is valid file.
Regards,
Prakash.

Oracle9ias Infrastructure Installation Problem

At Oracle9i Application Server randomize Password - failed
Release2(9.0.2.0.1)
Got the following error:
javax.naming.communicationException:ussvap02.ad.sjm.com:4032. Root Exception in Java.net.
Connect Exception: Connection Refused: Connect
at java.net.PlainSocketlmpl.socketConnect(Native Method)
at java.net.PlainSocketlmpl.doConnect(PlainSocketlmpl.java:355)
at java.net.PlainSocketlmpl.connectToAddress(PlainSocketlmpl.java:142)......
Please help!

The Member Feedback forum is for suggestions and feedback for OTN Developer Services. This forum is not monitored by Oracle support or product teams and so Oracle product and technology related questions will not be answered. We recommend that you post this thread to the Oracle Technology Network (OTN) > Products > Application Server > Products - Application Server - General forum.
OTN

Oracle 8.0.5 Post Installation Problem

Hi all,
I have installed Oracle 8.0.5.1 is installed on my RH 6.0 box.
However, I am running into a couple of post-installation
problems.
1. root.sh (sucessfully ran).
2. glibc patch (successfuly ran). There were a few errors on the
screen with the "mv" commands (file does not exist). Is tha
alright?
3. catrep.sql (problem). This is where I have a problem.
I ran dbstart as oracle805 (installation account), but I have no
idea whether or not I really started the database. ps -aux did
not yield any clue.
I also tried svrmgrl and "startup", but the file "initXXX.ora"
did not exist, so I copied the existing "init.ora" to
"initXXX.ora". XXX is my ORACLE_SID. Instead alert_XXX.log gave
me the following:
ORA-00202: controlfile: 'ora_control1'
ORA-27037: unable to obtain file status
So, in other words, I have no idea whether or not I have
successfully installed Oracle. All insights are greatly
appreciated.
Thanks a bunch...
Anh
null

Phan Anh Tran (guest) wrote:
: Hi all,
: I have installed Oracle 8.0.5.1 is installed on my RH 6.0 box.
: However, I am running into a couple of post-installation
: problems.
: 1. root.sh (sucessfully ran).
: 2. glibc patch (successfuly ran). There were a few errors on
the
: screen with the "mv" commands (file does not exist). Is tha
: alright?
: 3. catrep.sql (problem). This is where I have a problem.
: I ran dbstart as oracle805 (installation account), but I have
no
: idea whether or not I really started the database. ps -aux did
: not yield any clue.
: I also tried svrmgrl and "startup", but the file "initXXX.ora"
: did not exist, so I copied the existing "init.ora" to
: "initXXX.ora". XXX is my ORACLE_SID. Instead alert_XXX.log
gave
: me the following:
: ORA-00202: controlfile: 'ora_control1'
: ORA-27037: unable to obtain file status
: So, in other words, I have no idea whether or not I have
: successfully installed Oracle. All insights are greatly
: appreciated.
: Thanks a bunch...
: Anh
Hei !
I also did this fault :-( See this webpage - it's excellent
and describes everything.
http://jordan.fortwayne.com/oracle/rh6x.html
null

Post installation problems in vista 32bit

Sir
i am newbie.i installed 10gr2 in my vista,but sometimes its starting perfectly and sometimes not.Then i need to restart my machine and then only i am getting access in sql*plus.i have posted it here but the problem is still the same.[post installation problem its not solved yet|http://forums.oracle.com/forums/thread.jspa?threadID=930824&tstart=0] .
when the command maintained bellow is leaving no output at all.
emctl start dbconsoleIN the service panel is showing dbconsole status as server starting only.
what to do?
regards
Sayantan

Hans F wrote:
1) Vista is not an operating system. It is a family of operating systems. Which operating system within that family are you using?windows 7.
>
2) Oracle Database is designed to work on a server. It should have a static IP address and host name, or at least use a loopback adapter as a workaround. How is the IP address and host name on your Vista-xyz assigned?
using it for local machine in laptop.
HOST = FAXCOOLWAREZ037)(PORT = 1521)
>
Hopefully you are not using DHCP to assign the IP address, or you were sharp enough to install the loopback adapter first.

Post Moved Order installation problem

Post Moved to Phones Board http://community.bt.com/t5/Phones/Order-installation-problem/td-p/558275
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

you need to phone sales on 0800800150 and ask them what is happening
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Blog Post: Grid Infrastructure installation for Standalone

I hope This document should be useful for who trying to install Grid infrastructure for Standalone server..., Expect comments Also.Read it Enjoy it.
http://mohamedazar.wordpress.com/2010/11/29/grid-infrastructure-installation-guide-for-standalone-server/

Please check this metalink note:
OHASD Failed to Start: Inappropriate ioctl for device (Doc ID 1069182.1)

Installation Problem on iTunes 6.0.1.3 - HpSdpAppCoreApp

Help!
I'm trying to install the new iTunes 6.0 and I'm getting a message during installation that says
HpSdpAppCoreApp
"The feature you are trying to use in on a network resource that is unavailable.
Click OK to try again, or enter an alternative pathway to a folder containing the installation package "HpSdpAppCoreApp.msi" in the box below."
The last time I dug through some files on my own, bad things happened.
Thanks,
C

good gracious, Chris ...
okay, try applying the general advice on installation problems given here:
http://docs.info.apple.com/article.html?artnum=93976
... and the InstallShield Tips and Pointers are also helpful with these less-well-documented errors:
http://consumer.installshield.com/faq.asp#ts
keep us posted.
love, b

Installation problem on SUSE 12.1

Hi
I'm a Linux beginner and I am trying to install LV on SUSE 12.1
I've also posted my problems on Lava:
http://lavag.org/topic/15240-labview-installation-problem-on-suse-121/
The installation started and it looks quite all right, but when I try to start LabVIEW, the application just sits in the taskbar for about 20 seconds and then just disappears.
Any ideas?
Is there a way to debug to see what's going on?
Cheers,
Mike
Solved!
Go to Solution.

Hi Mike,
Unfortunately, there are no versions of LabVIEW supported on SUSE 12.1 at present. Here's a link to LabVIEW version compatibility with different Linux distributions. I saw from your other forum that you're attempting to install LabVIEW 2009, which is certified for SUSE 11.0 at the latest.
Best,
Dan N
Applications Engineer
National Instruments

Oracle database 11g release 2 installation problem on windows 7 (64-bit)

First of all my windows is not genuine, but on my friend's desktop oracle download and installation worked fine, he chose "create and configure database" options, and it works very well on his desktop, though his windows is also illegitimate. In my case, when I select "Create and configure database" option and pressed 'next",
(Go to my blog to see it with snapshots: Computer Science: Oracle database 11g release 2 installation problem on windows 7 (64-bit))
it asks to select class, I select "Desktop class" and pressed "next". The moment I pressed "next", the whole setup thing disappeared like it was never started. I searched for all possible reasons for why its not getting installed on my laptop, I used registry cleaner s/w, deleted 25 GB of data to create free space if it were the problem, increased the virtual memory to increase the space for RAM, I did almost everything to get this setup working, but I found no success with the "Create and Configure database" option
and
then
I chose a "database software only" option and chose to store in a folder w/o spaces. This way, I got database s/w only and then later I found "Database configuration Assistant (DBCA)" from windows START button and clicked to create and configure database manually. The steps are pretty much interactive and doesn't involve much brainstorming.
The values I filled for
1) Global Database Name : orcl
2) System Identifier : orcl
3) I chose common password for both SYS and SYSTEM
4) while on Enterprise Manager Configuration step, It asked me to create and configure listener in oracle home, so for that too, I typed "netca" in windows START menu and clicked it. There I added a listener.
5) I chose a Storage area which was the Oracle-home itself i.e. where our installation files goes , in my case it is : C:\oracle_base\product\11.2.0\dbhome_1\oradata
6) Then after few more nitty-gritty clicks, we are set to go !
Finally to write SQL code and to create your first TABLE , type "sqlplus" in windows "START" menu and click it when it appears. A command-prompt like window appears , which will ask you for username and password, so here they are :
Username : sys/ as sysdba
Password : (its the one you created in step 3 stated above )
After this you are ready to write your first SQL command.

Is this your solution to your original post at Oracle database 11g release 2 installation on windows 7 (64-bit) ?
Pl be aware that you should not create any custom objects in SYS or SYSTEM schema - you should create any such objects in a separate custom schema.
About Database Administrator Security and Privileges

Oracle8.1.5 installation problem on Solaris2.6

I am trying to install oracle 8.1.5 on Sun Solaris 2.6
system using OUI. During the installation and while creating
the database using DB configuration assistant, I am getting
the error message:
java.lang.StringIndexOutOfBoundsException: String index out of range: -1
at java.lang.String.substring(String.java)
at WizOSD.DBQueryAvailableRAM(WizOSD.java:245)
at CheckerClass.CheckAvailableRAM(CheckerClass.java:475)
at CheckerClass.DetectAll(CheckerClass.java:62)
at DBConfigInfo_base.<init>(DBConfigInfo_base.java:901)
at DBConfigInfo.<init>(DBConfigInfo.java:44)
at DBCreateWizard.<init>(DBCreateWizard.java:414)
at DBCreateWizard.main(DBCreateWizard.java:1075)
any suggestion
thanks a lot
larry([email protected])

good gracious, Chris ...
okay, try applying the general advice on installation problems given here:
http://docs.info.apple.com/article.html?artnum=93976
... and the InstallShield Tips and Pointers are also helpful with these less-well-documented errors:
http://consumer.installshield.com/faq.asp#ts
keep us posted.
love, b

Installation problem oracle 11g R2 on oracle enterprise linux 5 update 5

hello support,
i've installation problems with oracle 11g R2 on oracle enterprise linux 5 update 5. In the section "ORACLE Net-Konfigurationsassisten" the failure "[INS-20802] Oracle NET-Konfigurationsassistent not success". What's wrong? I've followed the instructions on http://www.oracle.com/technology/pub/articles/smiley-11gr1-install.html
I've heard the problem can occur with problems in /etc/hosts? My /etc/hosts is configured:
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1          oracle localhost.localdomain localhost
::1          localhost6.localdomain6 localhost6
is this ok? what can I do to bring the database-installation to success?
Thank's for help ;-)
Edited by: user5782904 on 09.05.2010 14:06

Here I paste you the configuration of my latest linux box which has a similar environment like yours.
# hostname
vmrhel6032.quist.ch
# domainname
(none)
# cat /etc/hosts
192.168.1.205 vmrhel6032 vmrhel6032.quist.ch
127.0.0.1     localhost localhost.localdomain localhost4 localhost4.localdomain4
::1           localhost localhost.localdomain localhost6 localhost6.localdomain6
# cat /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=vmrhel6032.quist.ch
# cat /etc/sysconfig/network-scripts/ifcfg-eth0
# Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE]
DEVICE=eth0
HWADDR=00:0C:29:6A:98:70
ONBOOT=yes
NETWORK=192.168.1.0
NETMASK=255.255.255.0
IPADDR=192.168.1.205
#Thanks to your post I noted that the hostname consist already of my domain entry. Try your configuration first without domain entry. It should look like:
# hostname
vmrhel6032
# domainname
(none)
# cat /etc/hosts
192.168.1.205 vmrhel6032
127.0.0.1     localhost localhost.localdomain localhost4 localhost4.localdomain4
::1           localhost localhost.localdomain localhost6 localhost6.localdomain6
# cat /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=vmrhel6032
# cat /etc/sysconfig/network-scripts/ifcfg-eth0
# Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE]
DEVICE=eth0
HWADDR=00:0C:29:6A:98:70
ONBOOT=yes
NETWORK=192.168.1.0
NETMASK=255.255.255.0
IPADDR=192.168.1.205
#Otherwise use the first example and don't forget to restart your server resp. the network service. ;)

Photosmart d110 copy/scan & installation problems on Windows 8.1

I have a few issues with my d110... First, I have successfully gotten it to print from Windows 8.1 but it does nothing else. I tried using the installation disc and the setup screen literally only shows Exit as an option... no install option whatsoever. I even removed the device and everything and tried it again to no avail.
Next, I tried to make a scan or copy and it shows a Scanner Failure error message saying "Unable to Copy or Scan".
I've read through several of the forums and nobody seems to encounter the same problem I am.
I have had this printer for a few years and have had nothing but problems with it from the beginning. Most of them are solved through hours of troubleshooting, but this printer is the biggest hassle. I'm not sure if at this point I should just replace it or what.... So frustrating.

Hi,
The first issue happens due to incompatibility, the original CD is not intended for Windows 8.1 and therefore you did not see any Install option... any supported OS is listed on the CD label, Windows 8 is not listed among the options...
As you describe a scanner failure, we will need to troubleshoot such n hardware issue first, scanning would not be possible if the hardware is faulty...
Turn the printer off and unplug any cable but the power to avoid any affect.
Turn it on and try copying.
If the same error appear, the scanner hardware misfunction.. follow these steps to troubleshoot a such.. if those does not resolve the Scanner Failure issue it will require you to service the printer:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00587971&tmp_task=solveCategory&cc=us&dlc=en&lc...
If you were able to resolve the hardware failure by following the steps above, download and install the Windows 8.1 software below:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-109779-2&cc=us&dlc=en&lc=en...
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

9ias post infrastructure installation problem

Similar Messages

Maybe you are looking for