9iAS WE v2 Beta: which adapter to use for BC4J-UIX-XML components?

hi,
through official TAR i still have no answer after 3 weeks, so maybe someone here can help me out.
using Jdveloper 9i RC i create a BC4J-based client project (BC4J-UIX-XML components) which i want to use for wireless services. the only thing i know is that oracle recommends this framework. together with WE v2 we got more than 1000 pages of documentation, but nothing about the new adapters (the most important thing i believe, what else am i supposed to do as official beta tester?!!).
any piece of information about the new adapters (especially the oc4j-adapter) or any kind of examples are really appreciated.
TIA, trevi

automatic mode is just for quick demos. You cannot internationalize your application while using automatic mode.
You will need to turn off automatic mode, and have bc4j:column beans in your table and databind the data to come from your resource bundles.

Similar Messages

  • HT4341 which adapter is used in Israel?

    which adapter is used in Israel? when reffering to world adapter kit?

    Isreal use "H" type socket.
    http://holytourist.blogsome.com/2008/07/14/electrical-power/
    http://www.adaptelec.com/index.php?main_page=document_general_info&products_id=3 15

  • Which adapter to use to integrate 2 instances of oracle apps 11.5.10

    We are using Oracle application server 10g integration interconnect(iSTUDIO) to integrate two instances in oracle apps 11.5.10 for the purpose of implementing customer data hub. We are not sure which adapters to use for this pupose. Whether it will be
    1. database adapters
    2. oracle application adapter
    3. Or any other adapters.
    We have to use publish/subscribe messaging paradigm.
    Any kind of help is welcome
    Regards
    Sourav Biswas

    Soubi,
    Yan is right but to add a bit more.
    Consider 2 application instances APP1 and APP2.
    If you install an OA (Oracle Apps) adapter into an OracleAS Oracle Home and point to APP1, you must use copyAdapter to "clone" another adapter of the same type (e.g. another OA adapter) for APP2. I don't think the copyAdapter script runs any of the post installation steps either so, you'll have to run the OAI schema scripts to create the OAI schema on APP2. See the post_installation.txt file for more information. This is in the adapter home directory.
    If you install an OA adapter for APP1 and decide to install a DB adapter for APP2, you can use the installation media to install both.
    However, if you decide (for whatever reason) to install an OA adapter and a DB adapter for APP1, you should be aware that the installation of the second adapter will drop and recreate the OAI schema for the spoke database. If you have been using one of the adapters before the second install this may cause you problems.
    Regards,
    David

  • How to decide which adapter to use from IDOC and RFC?

    Hi All,
    When interating XI with an SAP system,
    How to decide which adapter to use from IDOC and RFC?
    Thanks.

    Hi,
    you can also consider to use ABAP Proxy if you are working with Systems based on SAP Web AS 6.40.
    Here some useful links:
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/02/265c3cf311070ae10000000a114084/content.htm">ABAP Proxy Runtime</a>
    ABAP Proxies in XI(Client Proxy)
    /people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
    ABAP Server Proxies
    /people/siva.maranani/blog/2005/04/03/abap-server-proxies
    How do you activate ABAP Proxies?
    /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
    XI: Reliable Messaging EOIO in ABAP Proxies
    /people/arulraja.ma/blog/2006/08/18/xi-reliable-messaging-150-eoio-in-abap-proxies
    More links for proxy:
    proxies and performance...
    Hope this help
    Francesco

  • Please tell me for BAPI which adapter is used

    Hi friends this is  shalini, for BAPI's which adapter is used
    i think RFC adapter is used it is correct or wrong.
    please tell me friends.
    Regards
    Shalini shah

    Shah,
    Check this weblog for one of the integration on this:
    Weblog to send Response from RFC to File in Asyn Mode Using Proxy [original link is broken]
    /people/michal.krawczyk2/blog/2006/04/19/xi-rfc-or-abap-proxy-abap-proxies-with-attachments
    Regards,
    ---Satish

  • Which method is used for event creation

    Dear All,
    My client has more then one Purchase Organization. Workflow for Purchase order release very from pur org to pur org. For example - workflow WS92000030 is trigger when PO is created for India pur org where as workflow WS92000021 is trigger when PO is created for US pur org.  
    I checked and found that same Object Type - BUS2012 & event - RELEASESTEPCREATED is used in all Pur. Org PO release workflow. Also I found in Transaction code - SWETYP that Type linkage activate for  BUS2012, RELEASESTEPCREATED in all the PO workflow - WS92000030 & WS92000021.
    As per my knowledge, event can be created in various way such as Function module, Change document, General status management, Business Transaction Events etc.
    Can some one guide me, how can I found that which method is used for event creation in different pur org?
    How can I fould what is the fuctional module used for event creation if Fuctional module used for event creation. 
    For your information, I can see in T. Code - SWUO that 'Result dependent on a check function module'  for all the workflow - WS92000030, WS92000021 etc.
    Thanks in

    Hi Sahu,
    I dont think they have used the Function module or change document or any other kind of methods to trigger the workflow. This is because RELEASESTEPCREATED method is a standard method and it will be triggered by standard SAP. They can not make changes in standard sap saying RELEASESTEPCREATED should be triggered for this Purchase Org .
    Istead what i think is, they might have given the Event Condition for each workflow.
    In SWDD>> basic settings>> Start Events, we can give condition on triggering the workflow.
    Please check this.
    Regards,
    Gautham

  • Which CKM is used for moving data from Oracle to delimited file ?

    Hi All
    Please let me know Which CKM is used for moving data from Oracle to delimited file ?
    Also is there need of defining each columns before hand in target datastore. Cant ODI take it from the oracle table itself ?

    Addy,
    A CKM is a Check KM which is used to validate data and log errors. It is not going to assist you in data movement. You will need an LKM SQL to File append as answered in another thread.
    Assuming that you have a one to one mapping, to make things simpler you can duplicate the Oracle based model and create a file based model. This will take all the column definitions from the Oracle based model.
    Alternatively, you can also use an ODI tool odiSQLUnload to dump the data to a file
    HTH

  • How to specify which cert to use for software virt server?

    Is there a way to specify which certificate to use for each software virtual server? So, for example a user hitting https://somewhere.com would get the certificate for somewhere.com while the virtual server https://somewhereelse.com would use the certifcate with the name somewhereelse.com in it?

    No, this is not possible due to limitations of the underlying protocols.
    HTTP requests are sent over TCP connections which deal with IP addresses and port numbers (i.e. hardware virtual server properties), not hostnames (i.e. software virtual server properties). The HTTP protocol adds software virtual server support by allowing a client to identify the hostname (e.g. "www.iplanet.com") of the server it wishes to communicate with. This is achieved by including a "Host:" header with each HTTP request.
    Unfortunately, the SSL/TLS protocols require that the web server present its SSL/TLS certificate BEFORE the client sends its HTTP request. Since the software virtual server information is contained in the HTTP request, it is not possible for the server to select different certificates for different software virtual servers.
    You will need to use hardware virtual servers (i.e. virtual servers that have different IP addresses and/or port numbers) if you wish to use distinct SSL/TLS certificates.

  • In my scenario from r3 to CRM,IDOC for r3,which adapter is best for CRM

    from r3 to CRM which adapter is best for CRM for customer data

    Hi ,
    Some more info that might help you make a decision:
    CRM Middleware & XI
    Will SAP CRM Middleware be replaced by XI
    Regards
    Vijaya

  • After reopening Firefox does not remember which desktop was used for each window. Can you help, please.

    I'm using two displays and several desktops on my Mac (OS X 10.9.4).
    When I need to restart Firefox, it remembers to open windows from last session in correct display, but does not remember which desktop was used for each window. So when the application starts, it opens all windows on a desktop which is currently active instead of reopening them on desktops used during the last session. How to fix the issue?

    Hi Nerva,
    Thank you for your question, there is a add on I have been recommended to custom set up of opening windows in new monitors. It's called [https://addons.mozilla.org/en-US/firefox/addon/monitor-master/ Monitor Master].
    However, in regards to the session remembering which monitor the window was open in, in the profile folder there is a file that stores window positions and dimensions. It is called localstore.rdf.
    Please stay tuned for more investigation, as there are definitely bugs on file for similar issues. Pinpointing it is the hard part.

  • HT1918 I am trying to enter the No. Of my VISA card (which I normaly use for payments) in the billing info of my account and it is not accepted. Does anyone have any idea why?

    I am trying to enter the No. Of my VISA card (which I normaly use for payments) in the billing info of my account and it is not accepted. Does anyone have any idea why?

    JarleEkanger wrote:
    How about this? Use Delete array subset to extract chunks for averaging, and a shift register to retain the remaining array.
    It is typically not advisable to use "delete from array" in a tight loop. The constant memory reallocations due to array resizing are probably inefficient.
    Here's one simple way to do it..
    (If the number of points is not divisible by 10, the excess tail is discarded. You can easily modify that behavior if desired.)
    LabVIEW Champion . Do more with less code and in less time .
    Attachments:
    averages of 10.png ‏5 KB
    averages of 10.vi ‏9 KB

  • Can HTTP Receiver adapter be used for Sync Comm.  Pls advice urgent

    Hi All,
    I have some data present in XI.
    I need to send the data present in XI to System A through HTTP adapter in synchronous manner means that system should send response back to XI.
    Can HTTP Receiver adapter be used for Sync Commumication in my scenario.
    Please send blogs/link for it
    Regards

    Hi Henry,
    >>I have some data present in XI.
    In what form it is available on XI(e.g., IDOC or RFC or File etc..)?
    First let us know this.
    Thanks,
    Gujjeti

  • Which cable should use for Sony DV connect to iMac ?

    Which cable should use for Sony DV(IEEE 1394)connect to iMac ?

    If your iMac has just the FireWire 800 connection, you will need the 9 pin to 4 pin cable.
    http://www.cwol.com/firewire/firewire-800-1394b-cables.htm
    If your iMac has the FireWire 400 connection, you will need the 6 pin to 4 pin cable.
    http://www.radtech.us/Products/ProCableFW400800.aspx
    Links are to illustrate examples. You should be able to pick them up at most computer stores.

  • I have a Comcast system and am going through a Bose amp for sound.  The comcast box has an HDMI port which I've used for the Apple TV connection.  Nothing works! Help.

    have a Comcast system and am going through a Bose amp for sound.  The comcast box has an HDMI port which I've used for the Apple TV connection.  Nothing works! Help.

    Thanks.  Thought that would be the solution but for my wall mounted TV it's going to be a problem but many thanks for your reply.....

  • Which function is used for  adding days to given month

    which function is used for  adding days to given month

    Hi Jagrut,
    Good ... Check out the following examples
    <b>Get a date</b>
    DATE_GET_WEEK Returns week for a date
    WEEK_GET_FIRST_DAY Returns first day for a week
    RP_LAST_DAY_OF_MONTHS Returns last day of month
    FIRST_DAY_IN_PERIOD_GET Get first day of a period
    LAST_DAY_IN_PERIOD_GET Get last day of a period
    RP_LAST_DAY_OF_MONTHS Determine last day of month
    <b>Date calculations</b>
    DATE_COMPUTE_DAY Returns a number indicating what day of the week the date falls on. Monday is returned as a 1, Tuesday as 2, etc.
    DATE_IN_FUTURE Calculate a date N days in the future.
    RP_CALC_DATE_IN_INTERVAL Add days/months to a date
    RP_CALC_DATE_IN_INTERVAL Add/subtract years/months/days from a date
    SD_DATETIME_DIFFERENCE Give the difference in Days and Time for 2 dates
    MONTH_PLUS_DETERMINE Add or subtract months from a date. To subtract a month, enter a negative value for the 'months' parameter.
    DATE_CREATE Calculates a date from the input parameters:
    Example: DATE_CREATE
    CALL FUNCTION 'DATE_CREATE'
    EXPORTING
       anzahl_jahre  = 1
       anzahl_monate = 2
       anzahl_tage   = 3
       datum_ein     = '20010101'
    IMPORTING
       datum_aus     = l_new_date.
       Result:
       l_new_date = 20020304
    Example: MONTH_PLUS_DETERMINE
    data: new_date type d.
    CALL FUNCTION 'MONTH_PLUS_DETERMINE'
    EXPORTING
    months = -5 " Negative to subtract from old date, positive to add
    olddate = sy-datum
    IMPORTING
    NEWDATE = new_date.
    write: / new_date.
    <b>Hollidays</b>
    HOLIDAY_GET Provides a table of all the holidays based upon a Factory Calendar &/ Holiday Calendar.
    HOLIDAY_CHECK_AND_GET_INFO Useful for determining whether or not a date is a holiday. Give the function a date, and a holiday calendar, and you can determine if the
    date is a holiday by checking the parameter HOLIDAY_FOUND.
    Example: HOLIDAY_CHECK_AND_GET_INFO
    data: ld_date                 like scal-datum  default sy-datum,
          lc_holiday_cal_id       like scal-hcalid default 'CA',
          ltab_holiday_attributes like thol occurs 0 with header line,
          lc_holiday_found        like scal-indicator.
    CALL FUNCTION 'HOLIDAY_CHECK_AND_GET_INFO'
      EXPORTING
        date                               = ld_date
        holiday_calendar_id                = lc_holiday_cal_id
        WITH_HOLIDAY_ATTRIBUTES            = 'X'
      IMPORTING
        HOLIDAY_FOUND                      = lc_holiday_found
      tables
        holiday_attributes                 = ltab_holiday_attributes
      EXCEPTIONS
        CALENDAR_BUFFER_NOT_LOADABLE       = 1
        DATE_AFTER_RANGE                   = 2
        DATE_BEFORE_RANGE                  = 3
        DATE_INVALID                       = 4
        HOLIDAY_CALENDAR_ID_MISSING        = 5
        HOLIDAY_CALENDAR_NOT_FOUND         = 6
        OTHERS                             = 7.
    if sy-subrc = 0 and
       lc_holiday_found = 'X'.
      write: / ld_date, 'is a holiday'.
    else.
      write: / ld_date, 'is not a holiday, or there was an error calling the function'.
    endif.
    Checking dates
    DATE_CHECK_PLAUSIBILITY Check to see if a date is in a valid format for SAP. Works well when validating dates being passed in from other systems.
    Converting dates
    DATE_CONV_EXT_TO_INT Conversion of dates to SAP internal format e.g. '28.03.2000' -> 20000328 Can also be used to check if a date is valid ( sy-subrc <> 0 )
    Function to return literal for month
    he table you want to use is T247. You can also use the function MONTH_NAMES_GET.
    You can also try table T015M. It has the month number in it's key.
    Formatting
    DATUMSAUFBEREITUNG Format date as the user settings
    Other
    MONTH_NAMES_GET It returns all the month and names in repective language.
    Good Luck and thanks
    AK

Maybe you are looking for