A 200 - The 3 little buttons by the power button stopped working
Win XP, SP2, 1Gb memory, nothing else special.
Those pretty little buttons have stopped firing up software. The only function seems to work is that the one next to the power button turns the machine on!
Any Ideas?
The only recent change is I upgraded Microsoft Office 2003 recently.
The buttons ARE set to fire software up.
Hi
Well, I dont know why it doesnt work but these 3 little buttons are Toshiba Controls.
Did you try to update the controls driver? You can find it on the Toshiba website under
http://eu.computers.toshiba-europe.com and Support & Downloads.
Furthermore you can check the settings. Im not sure but I think you can find them in Control Panel .
Bye
Similar Messages
-
my iphone fell on the floor and the power botton wont work and also the screen went black i already tried to reset it throun itunes but the phone did not connect and i dont know what to do
You can take it to Apple and get replaced as long as you pay for the replacement.
Allan -
I cannot open my firefox broswer. The message box appeared that said a problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. Under that there are debug and close program buttons.
JackieMars71 I would recommend reviewing your installation log files to determine if there are any errors during the installation process. You can find information on how to locate and interpret your installation log files at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html. You are welcome to post any specific errors you discover to this discussion.
-
My iphone 4 wont turn on after hours of charging, normally i would press the lock button and home button together but my lock button stopped working afue weeks ago. Help!
Hello Kimbo1991,
It sounds like your phone is not successfully booting even though you have reset the device. I would next recommend attempting a backup and restore to iTunes with this article:
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/ht1766
If you are unable to restore with iTunes I would next put the device into recovery mode, and attempt the restore again:
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Thank you for using Apple Support Communities.
Regards,
Sterling -
I dropped my Iphone in water and the on/off button stopped working, how do I fix it?
I dropped my phone in some water and it was only in there for about two or three seconds. I grabbed it and dried it straight away and made sure to get in all of it, and it was fine, everything worked. But about an hour after the on/off button stopped working, so i have to use the home button to unlock it and have to wait for the screen to turn off after 1 minute of leaving it. I cant turn it off and dont know how to fix it. Will it go away on its own, do I have to send it off to get fixed? This literally happened like two hours ago, and my phone is a bit more than a year old. Can anyone help me?
Make an app;ointment at the genius bar and take your credit card. You can get an out of warrnty replacement for an iPhone 4 for $149.
If you had just done it, the advice would have been to shut it off and put it in a bowl or bag of uncooked rice or silica gel for a week. Unfortunately, since it's been powered on for several hours, since then, it may have been permanently damaged. You can try the rice trick, but be prepared to pay for a replacement at some point down the road. -
My top button stopped working, the physical button is broken.
My top button stopped working, the physical button is broken. Apple genius' stated they will not fix my phone because there are signs of moisture in my phone. What does that have to do with my broken button, and why can't my phone functioning the way it is supposed to due to an issue that is not my fault?
wow i dont know who you are getting your phone "fixed" through but its not apple.
Apple does not charge prices like that.
If you got it 1 year ago in september, the hardware warranty has expired by now unless you had your device covered by applecare insurance.
and if it WERE covered by limited hardware warranty, an obvious hardware issue like the power button not working is covered under the warranty UNLESS it was due to accidental damage.
So if you paid 198 dollars, chances are its because you dropped your phone and thats why the button was not working,.
..and even then, the iphone 4 out of warranty/accidental damage replacement fee is 149. not 198. -
I've had an iphone4 since April and recently the lock button stopped working, I was wondering since I hadn't had it for a year if it could get fixed for free
ONly way to find out is to go to your nearest Apple store and talk to the people at the genius bar.
-
Hello,
Today my M-Audio iContol play button stopped working after I unplugged it from the USB port and then plugged it back in. I have a Mac Book Pro Mac OS X 10.7.3 and I only use it for Garage Band. The iControl will only play a very short snippet of a song then shuts off? (Like a millisecond) My space bar works fine as well as the GB play button using the mouse. I have searched for the GB preference files listed on some blogs but I cannot find them...help please!! One more thing, I plgged the iControl into my other Imac and it works fine so the iControl is ok.
Thanks!I have searched for the GB preference files listed on some blogs but I cannot find them...help please!!
In MacOS 10.7.3 the User LIbrary is hidden. To find the Preferences Files use the Finder "Go" menu:
Click onto you Desktop to bring the Finder forward.
In the Finder Menu press "Go" and hold down the "option/alt" key, until your user library appears in the drop-down menu
Select "Library" and in the Finder window that opens navigate to the "Prederences" folder; move com.apple.garageband.plist to the Desktop.
Regards
Léonie -
my iphone 4 the vibrate has stopped working and the txt tone wont work even tho it says its got a tune and when i go to turn it up on side buttons it say (headfones) but they arent plugged in, but the sound works when someone rings me???
ATtempt to power off your device and power it back on, if that doesn't work reset all settings should resolve it for you
-
My home button on the iPhone 5 stopped working. What can I do? Fixable?
My home button on the iPhone 5 stopped working. What can I do? Fixable?
take it to the Apple store.
-
What makes the Print Screen and End Buttons stop working?
I am 3 weeks into the trial period. Twice before, the Print Screen (manual capture) and End buttons stopped working. The only way I found to correct this is to uninstall and reinstall the application. Am I doing something wrong, or is this a bug?
More information on this issue: When I start recording in any mode, one screen is captured. No other screens are captured during execution on program functions, menu selection, navigation, etc. Once again I removed and re-installed the application. This time it made no difference.
-
Replaced my iphone 5 with new one because my first one the volume buttons stopped working. Now my contact list is all wrong. It's correct on my I pad but don't know how to correct it on my phone. And my email is loading hundreds of old emails,?
If the iPod is defective and not abused Apple will exchange it at no cost under your warranty.
Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
My iphone home button stopped working and the phone started getting hot. The camera also fogged up. What do I do?
I'm guessing it's a hardware problem. Your best option is to go to an Apple Store as soon as you can to try and sort this all out. While you're waiting to go visit an Apple Store, however, I'd imagine you still want to use your phone. To circumvent your hardware button problems, try enabling Assistive Touch by going to Settings>General>Accesibility>Assistive Touch. You'll see a small box appear on your screen. Tapping it will bring up several options for you to choose from, like the home button. Clicking the "Device" option will give you several options for controlling your phone that you would normally use hardware buttons for (i.e. volume, lock your phone, etc.) Hope this helps and good luck!
-
After plug to the charger i'phone 5 home button stop working
I have purchased Iphone 5. After the battery went off I try to charge and synchronize with ITune. Problem occurred. The Home button stopped working after first attempt to charge. OS has been replaced and Iphon returned to factory setting. I does no help. Self diagnostic online helped, however when I try plug again to the charger the same story. Home button off?
Hiya, siwynavline.
You might try following the following steps to see if they may help sort your home button.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Specifically the following sections:
The Home button is slow to respond
If the Home button is slow to respond when exiting one application, try another application.
If the issue exists only in certain applications, try removing and reinstalling those applications. For further assistance in installing and troubleshooting applications see this article
If the issue continues, Try turning iPhone off and then on again. If the iPhone will not restart, try resetting it.
If the issue is still happening, try to restore the iPhone
Seek service is the issue is still occurring.
The Home button is not working
Put the iPhone to sleep.
Wait a couple of seconds.
Press the Home button.
iPhone should wake up.
If iPhone does not wake up, then iPhone should be serviced.
If these steps don't resolve the issue, you can seek service via our Contact Apple Support webpage:
Contact Apple Support
http://expresslane.apple.com
Best regards,
Allen -
After installing ios7, my ipad buttons stopped working, I can't even turn off the ipad. Please help me. I don't know what to do.
Try to reset the device:
Device Reset (won't affect settings/data/music/apps/etc)
1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
2. Continue to hold BOTH (ignoring any other messages that may show) until you see the
Apple logo on the screen.
3. Release BOTH buttons when you see the Apple logo and allow the device to boot
normally. -
How common is it that the on/off button stops working? Time to throw away the ipod touch? Safe to fly? No more "print screen"?
Place the iPod in recovery mode using one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
For MAC or PC
The Firmware Umbrella - TinyUmbrella
and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Maybe you are looking for
-
Resource related billing (dp91) functionality
hi every one can some body explain me the concept of resource related billing. can v use cats for billing hours to our client . Any study material which can explain the functionality of dp91(rrb). Its really an emergency so any help would be gr8
-
SocialMiner Reporting using CUIC
Hi, I have just deployed SocialMiner 9.0 and from the dokwiki, I see that I require CUIC to run the reports. I have read that UCCX 9 comes with CUIC. My question is should I upgrade my UCCX 8.5 to 9 so I can make use of the CUIC to get SocialMiner re
-
Hi, all ! In transaction Miro, under Nota Fiscal, the field TAX RATE is filled with a apropriate value, but users are trying to input a value directly for the field TAX VALUE, so that the result should discard whatever is in Tax rate, but that's not
-
Calender suddenly crashing on iPod 1st Gen.
Suddenly this evening, my calender app crashes on startup. I've not changed any software. The calender is synced through iCloud with my iPhone which is operating fine. The iOS is 5.1.1 (Bear in mind it's a 1st Gen iPad and wont go to iOS6). Any ideas
-
hello when i create an oracle 10g database "ABC" on windows 2003 it creates also a service name "ABC". is this service used only to aumatically start the oracle insatnce on startup? dos it exist also on linux/unix how to make it automatic on linux ?