A 5.25 firewire external that works?

Anyone know of a 5.25 firewire external enclosure that works with intel macs? I had a few, macally style, and they only work usb-2....
any help greatly appreciated.
thanks

Have a look at this 5.25" enclosure (link). OWC are a well respected Mac supplier. The only downside is that it seems to have an ATA5 bus in it meaning hard drives are limited to 128GB but I guess as you want a 5.25" enclosure you rather have an optical drive in mind. 
Alternatively look at the whole package (link).
cheers
mrtotes

Similar Messages

  • Are there ANY firewire interfaces that work with 24" imac 2.16 Core 2 duo?

    This is really getting frustrating. I have now tried and failed at getting both an m-audio profire lightbridge and a TC electronic studio konnekt 48 to work on this computer. Both interfaces were tested with Leopard and Tiger, no success.
    My computer is NOT the aluminum imac, it's the earlier whiteface version, so it's supposed to have the TI chipset(I've been told that the aluminum imacs don't work because they have a agrere chipset....) The firewire port works fine with an external hard drive, but no one seems to be able to write software drivers that work.
    If anyone is successfully running a firewire interface with this model computer please let me know what OS you are running, the interface, and what software you are using.
    I'm starting to think that the problem is on apple's end, it shouldn't be this hard for third party manufacturers to write reliable drivers. both m-audio and tc electronic's forums are littered with complaints about bad drivers for the last year or so.
    Message was edited by: MNMinstrel

    Yildox - I've been doing a little more research... Your imac has a known problem, it's the particular firewire chipset it uses, made by Agere. The older white versions have a Texas instruments chipset, which is supposed to be better, though I haven't had any success with mine so far in the audio interface department.
    I really think that the problem is bigger than that though. Everyone having a problem with a firewire audio interface seems to have one similarity, a mac made in the last 2 years running OS 10.4.9 or later.

  • Good firewire interfaces that work well with Macs?

    Alrighty fellas, I've been trying to find a good interface to run my mics on for about 3 months now. I previously decided on presonous firepod and a audiofire pre8, but guess what... Neither of them worked haha. So I've been doing some hardcore research to try and find an interface that is more compatible with my set up. I have a budget of $700 and need at least 8 mic inputs to run my drum mics. Im currently using garage band, but will probably bump up to logic studio soon. Any advice would help so have at it haha. Thanks in advance for your help.

    Baffling - I work with someone who has exactly the same 17" MacBook Pro with a AudioFire Pre8 (which is one of the best interfaces in that price range IMO) and it works great.
    my mac worked with other firewire devices
    Other FW audio interfaces, or just a FW drive to see if the FW 400 port was working? I'm wondering if the store knew how to set up the interface within Logic's audio preferences?

  • Problem importing video from a DV camera into the new imovie 10.0?  I have a Sony DCR TRV17 connected via Firewire port that worked in 9.0.9 but not under 10.0...

    I have a Sony DCR TRV17 that I used to pass through VCR tape video via Firewire port to my Mac Pro under Imovie 9.0.9 without an issue.   Now under Imovie 10.0 the video shows in the import window, I can start recording yet when I stop recording the recorded clips do not show up anywhere.  The movie file I'm creating still indicates that I still need to import video.   Anyone having similar problems?

    Hey Dave,
    I had this issue only once before but was lucky enought to find it was a specific event causing the import to freeze. It took me some time to isolate the problem though. I would recommend letting it sit there for some time before you try any troubleshooting. Larger libraries can take long periods of time to update.
    This is a good thread for this issue.  I would first try removing the iMovie.plist as elikness mentions.
    1. Open Finder
    2. Click on "Go" in the menu bar.
    3. Click on Go To Folder on the dropdown menu.
    4. Type "~/Library/Preferences/" in the text field and click Go.
    5. Find the com.apple.iMovie(some number).plist file and move it to Trash.
    Quit and relaunch iMovie to see if this took care of the issue before attempting the next step. If you're still having an issue then you can try what I needed to do which is isolating the problem event.
    1. Open Finder.
    2. Go to the Movies folder. You should see iMovie Events here.
    If you have a larger event library I'd recommend renaming the iMovie Events folder to say, "iMovie Events COPY". Then create a new empty folder named “iMovie Events”. When you launch iMovie 9.0.9 all events will be missing at this point. Quit iMovie if it is open. Then you can either drag each event from iMovie Events COPY to iMovie Events or you can select and drag several at a time. Each time you drag an event folder back into the new iMovie Events folder launch iMovie 9.0.9 to see if you are having the same issue. Wash and repeat until either you have found the problem event or you have imported all events.
    If you find the problem event you can reimport the clip from iMovie 9.0.9 by going to File > Import > Movies and navigating to that events iMovie Original Movies folder to find the clip.
    Hope this helps!

  • What is the best way to record a project to an external recorded via firewire. Also, who makes a recorder that works with a mac?

    What is the best way to record a project from the timeline to an external recorder via firewire? Also, who makes a recorder that works with a mac and recordes in realtime? This is possible right?

    While theoretically possible, sometimes the camera people disable recording back to tape from the computer due to DRM (digital rights managment) issues. They will allow tape to tape transfers however.
    Test your process first is all I can advise.
    x

  • What external drives work well with a late 2011 MacBook Pro?  I ask because I just found out the hard way that a Samsung EVO 840 does not.  Also should I avail myself of something that works with Thunderbolt or Firewire?

    What external drives work well with a late 2011 MacBook Pro (I7, Lion OS) apart from my Kingston flash and USB drive, and the SD drives that I use in my cameras and recording devices?  I ask because I just found out the hard way that a Samsung EVO 840 does not.  Also, should I avail myself of something that works with the Thunderbolt or Firewire connections?  I'm looking to back up music and video files created and/or processed in Logic Pro and the Adobe Production Premium software suite (Premier Pro, After Effects, Audition, etc).

    Hmm, not sure what problems you had installing this drive. The review here gives it good marks for Mac:
    http://www.amazon.com/Samsung-Electronics-EVO-Series-2-5-Inch-MZ-7TE1T0BW/produc t-reviews/B00E3W16OU
    There does seem to be a lot of prep to make it work:
    "1. Preparation to install your new shiny SSD
    1.a You will need a migration tool (I used the Sabrent kit USB 3.0 to Sata that was suggested in these review) see link http://www.amazon.com/gp/product/B00DQJME7Y/ref=oh_details_o03_s01_i01?ie=UTF8&p sc=1
    1.b You will need to download a trim enabler (mid 2012 macbooks only support native trim with apple brand ssd's) I recommend going to cindori.org and downloading trim enabler version 3.xx. You can do this step before or after the OS migration
    1.c You cannot use the Samsung SSD migration software *don't worry Mac has its own imaging/migration utility*"
    Also in those reviews:
    " Only down side when using this product in a Mac Mini is you will be required to download and install Trim Enabler so that your drive performs optimally on your Mac device. This is an Apple issue, not Samsung, but it is an extra step you will have to take after you install the hard drive, and any time you perform an OS upgrade." He rant's on.
    Personally I only deal with OWC:
    http://eshop.macsales.com/shop/SSD/OWC/
    They are very knowledgable and if there's a problem they will gladly take back the item. (Never happened to me yet - 8 years and counting).
    Just upgraded my 13" MBP 2011 to 120 GB for $79. Adobe CS 6 opens in 3 seconds! Awesome!
    When I was in Chicago I had a pro photographer for a client. She wound up with 4 internal drives in her Pro, 4 external drives and an dual array locked in a steel vault in the basement. All from OWC. OK she was a bit paranoid. Great client though.
    As far as value for price:
    http://eshop.macsales.com/item/OWC/MES3FH7500G/
    500 GB for $130.
    However as far as reliability is concerned:
    http://www.rockpapershotgun.com/2014/01/30/are-ssds-reliable/
    http://www.extremetech.com/computing/173887-ssd-stress-testing-finds-intel-might -be-the-only-reliable-drive-manufacturer
    So sudden power loss is an issue with SSDs.
    Personally I'd go with a moderate sized SSD internally and a conventional external for backup. An array would be the most reliable.

  • Time Machine fails to backup HD and stalls computer when backing up to external HD (Western Digital WD5000MT) when using Firewire 800 but works fine using USB

    I have a mid 2012 MBP (MacbookPro9,1) running Mountain Lion 10.8.2.  When I start a Time Machine backup to an external Western Digital HD (WD5000MT) connected using a Firewire 800 cable, my open programs stop responding and in general my computer freezes up not allowing me to open activity monitor or the console utility.  I can't even shut down or restart my computer and must hard boot to reset.  Though removing the firewire cable that goes to the external HD can sometimes get my system working again.  However, the WD external HD also has a usb port and when I connect it to my computer via a USB cable, Time Machine seems to backup my system fine without stalling my computer.  This same external HD worked fine with Firewire 800 using my old late 2007 MBP running snow leopard.  I should note that my brother has the exact same model WD external HD and he also had issues with the firewire port on his MBP running mountain lion.  I have run the disk utility checking for disk/file permission errors and the drive itself seems fine.  I initially formatted that drive as ExFAT but while troubleshooting reformatted to HFS+ and still had the same issue.  I tested using a different firewire 800 cable but still had the same issue.  Can't think of anything else to do.  I don't have another firewire-compatible device to test if it is the HD vs the firewire port.   I would prefer to use the firewire port for quicker transfer speeds but I'm stuck with USB for now.  Any suggestions? 

    Maybe these will help:
    http://pondini.org/TM/Troubleshooting.html
    http://support.apple.com/kb/PH11194
    http://support.apple.com/kb/HT3275 (note - older article)
    Have you tried looking at the Western Digital web site to see if you can find anything?
    http://support.wdc.com

  • External DVD burner that works with Mavericks?

    I see a lot of options in the $25 to $50 range from the likes of Samsung, Buffalo, LG, etc..
    But I need one that is compatible with my late-2012 Mini running Mavericks.
    Thanks in advance for your help.

    Any external disc drive will work. I would recommend you to get one that works over USB or FireWire, so you won't have any compatibility issue

  • External optical drive that works?

    Hi,  I have had an Imac 27 i5, its 3 weeks old now, I did the free Lion os upgrade before realising that Lion seems to be buggy.
    I have had problems some of which I have got over thanks to this forum, some I have not  I still cant get my isp set-up working but a work-around is giving me service, the wireless connection drops out regularly but using ethernet works. Mail wont send my emails and Itunes is problematic.   The bluetooth trackpad, mouse and keyboard disconnects frequently but thankfully reconnects soon after. Neither of my two existing external hard drives or my external optical drive would work on this Imac,  I replaced one hard drive and that works now,  but tells me that I have 120gb free on a drive that is only 120gb and has a full Time machine backup on it?). I replaced the optical drive with a very cheap one and that works now.
    My old optical drive used Llitescribe and I really want to carry on using it with the Imac,  Can any of you guys recommend an optical drive with Litescribe that will work with the Imac and os Lion?  I am getting tired of having to spend out money replacing things I expected to work with the Mac and dont!
    I brought the Imac because I wanted a hassle free computer, I read and took in all the reasons for using Mac over Microsoft and to be hounest with you the Last 3 weeks have nearly driven me to send the Imac back!   I expected it to "just work"  and be easier to use but it has not turned out that way for me up to now,  I have contacted Apple about the problems and they dont seem to be of very much help - up to now, but thanks to you guys and this forum I am getting things sorted, slowly.  Apple need to get thier act together I think!  What hurts the most is that my 3 year old £600.00. HP PC with windows 7 worked "out of the box" and has "just worked" to this day!  I cannot say that about the £1650.00. Imac!

    The external Apple superdrives are compatible only with the Macs that did not come with an internal optical drive.  Take it back and get a 3rd party drive, preferably one with drawer loading.  I have an 2011 iMac and bought this external drive:  24X OWC Mercury Pro.  I do a lot of ripping of audiobooks for my iPhone so wanted one with a faster read throughput than USB 2 which is all my iMac has. So I use the FW port on the drive.
    OWC is a very well know Mac supplier and has excellent reputation both for item quality and customer support.

  • I have a Seagate Slim Portable 500 GB USB 3.0 external hard drive that worked great with my Macbook Pro 13" Retina but gets ejected and won't show files on any iMac.

    I have a Seagate Slim Portable 500 GB USB 3.0 external hard drive that worked great with my Macbook Pro 13" Retina but gets ejected and won't show files on any iMac. My Macbook Pro and the two different iMacs I tried it on were all using Mountain Lion, so the only difference was the iMac versus Macbook Pro.

    I just tried this, no luck...
    I connected a different USB cable, still the same problem. Tried both cables with the problematic hard drive on two different computers, still the same problem.
    At this point I assume I'll probably need professional help in saving the files, thanks for the assistance.

  • My external HD stopped showing up on my desktop, but shows up in my Disk Utility.. I have tried a disk verify and repair - sometimes that works and completes, sometimes it doesn't. Either way, it wont eject or mount, and still doesn't show up on desktop.

    My external HD stopped showing up on my desktop, but shows up in my Disk Utility..
    I have tried a disk verify and repair - sometimes that works and completes, sometimes it doesn't.
    Either way, it wont eject or mount, and still doesn't show up on desktop.
    There are no ticking noises coming from the hard drive, and it lights up still, and i have tried replacing the cords, and restarting/shutting down the computer, and have tried it on a mac desktop also - same problem.
    Any help would be great!!!

    and have tried it on a mac desktop also - same problem.
    Try this on one of the Macs ...
    Open a Finder window. From the menu bar click Finder > Preferrences
    Select the General tab then select:  Show External Disks

  • What is wrong with my 30" Cinema Display?  The USB and FireWire ports still work, but the screen is pitch black. When you plug it into the computer, it detects that it's a Cinema Display.

    When you plug it into the computer, it detects that it's a Cinema HD but the screen is pitch black.
    For some reason, the USB and FireWire ports still work.

    If you shine a really bright light directly into the screen can you then see a faint image on the screen? If so, that would indicate the backlight has died (hardware failure) and the unit needs repairing.

  • Hi ya'll! I'm still learning how to navigate my way with Lightroom. (Last time I wrote, I did get some responses that work. Thanks so much!) Now, I have another question. When I try to copy pics from my external drive to a CD/DVD, no matter if do it from

    Hi ya'll! I'm still learning how to navigate my way with Lightroom. (Last time I wrote, I did get some responses that work. Thanks so much!) Now, I have another question. When I try to copy pics from my external drive to a CD/DVD, no matter if do it from LR or my drive, I keep getting the message; "Disk burning is not supported by LR on this computer." I've tried everything I can think of, so, I thought I'd see if anyone may know if there's anything I can do. Or could it be that my computer just can't handle it? Help!!! So frustrating!!  I have a PC Lenovo computer, I don't know if this makes any difference. Any ideas? Thanks so much for your help!!!

    Have you burned Discs with other programs using this computer? Are you certain that you have a drive that will burn discs?

  • External audio controllers that work with FCP

    Is FCP cabable of working with external audio control interfaces such as the kind that work with Logic?
    If so, any recommendations on which ones work well?
    Cheers,
    Jesse.

    take a look at the Mackie MCU (control surface only) or the Tascam FW1082 (control surface/mixer hybrid)
    ... or any product that support the Mackie Control protocol or Logic Control should work.
    smaller, interesting interfaces at the moment include
    the FireOne http://www.tascam.com/details;8,14,104.html
    and the AlphaTrack http://www.frontierdesign.com/Products/AlphaTrack
    larger more extensible setups would include
    the Tascam FW1884 http://www.tascam.com/catalogue;47,14.html
    with additional FE-8 units for up to 128 tracks http://www.tascam.com/products/fe-8.html

  • External webcams that work with Leopard?

    Anybody know of an external webcam that works with the new Mac OS X (Leopard)?

    http://discussions.apple.com/thread.jspa?messageID=5725045&#5725045
    The info recommended there for use with 10.4.10 applies equally to Leopard (10.5)
    EZ Jim
    PowerBook 1.67 GHz w/Mac OS X (10.4.10) G5 DP 1.8 w/Mac OS X (10.5)  External iSight

Maybe you are looking for