A Adobe newbie question on site export..........

I am a newbie to adobe muse, is it possible to export sites to WordPress, Wp Premium, Joomla, Drupal, Magneto.

Hi,
In order to contact us please follow this link :- https://helpx.adobe.com/nz/contact.html
Regards,
Rohit Nair

Similar Messages

NewBe question - Effects not exporting to disk

Hi,
I've been experimenting with GB. I have a Video with with an audio track that is very low. I imported the video into GB selected instrument with the audio on it. then on the info window clicked on edit and added the AUGraphicEQ to work bring up the levels. I have it sounding okay in GB. However when I go to share >> export to disk >> full quality, the output is the same as the input.
I have also tried to turn off the track effect and apply it to the master, same result. I also tried to perform some effects on a jiggle track and export and mp3 with the same result.
Basically I cannot figure out how to get the effects I hear in GB to become an output file.
Any direction or thoughts are appreciated.
Thanks,
Mike

Normally the effects should be on the exported audio file. Are you sure that they are not applied? Or is the level just too low? Try to turn off the auto-normalize feature in GB's preferences.

Newbie Question. just installed IE7.. how do I set up a local host to preview sites?

Sorry for the newbie question... but it's been a long time since I have done this
Thanks!

Just define your site in DW as always. For a static site, that's all you need to do.

Vector file - newb question

After reading the user manual, I still don't understand how this works. Let's say I use Adobe Illustrator to draw a picture of sayyyyyyyy.......a kitty. Is there any possible way to take my kitty picture, export it out of illustrator as a vector file and import it into Motion so that motion can scale that image more or less indefinitely and maintain the crystal clear image no matter what the size. Like, can I zoom in on kitty's eyeball in Motion and still have the image look good?
Sorry for the newbie question but I just have not worked with vector images much. Thanks for any help.

The answer is yes. All you do is save the file as .ai or .pdf, bring it into Motion, and turn off fixed resolution for the underlying media (import the file to the Canvas, select it in the Media tab of the Project Pane, select the Media tab of the Inspector, and uncheck Fixed Resolution). You can now scale it as large as you wish with no loss of resolution.

I have built a android application using adobe flex, and i have exported it with native air. The application is working fine on samsung phones whereas it is getting crashed on Moto Phones, which runs on android kitkat, is there any compatibility issue ?,

I have built a android application using adobe flex, and i have exported it with native air. The application is working fine on samsung phones whereas it is getting crashed on Moto Phones, which runs on android kitkat, is there any compatibility issue ?, I have built a android application using adobe flex, and i have exported it with native air. The application is working fine on samsung phones whereas it is getting crashed on Moto Phones, which runs on android kitkat, is there any compatibility issue ?, I have built a android application using adobe flex, and i have exported it with native air. The application is working fine on samsung phones whereas it is getting crashed on Moto Phones, which runs on android kitkat, is there any compatibility issue ?

Thanks, Flex harUI, for the direction in regards to isolating build changes. That aside (still working on it), can you offer any direction in regards to my original question on SDK and AIR compatibility? I'm specifically looking for a version compatibility mapping or anything that definitively states, "Flex SDK x.y.z works with the following versions of AIR". This information is crucial for us in order to more specifically plan our own roadmap built upon these two frameworks as we consider both existing installations of our software and future distributions.

Hi there, i'm trying to change a PDF document written in arabic to Word document, the problem is (( i can't find the arabic language in adobe )) the question is how to install the arabic language

hi there, i'm trying to change a PDF document written in arabic to Word document, the problem is (( i can't find the arabic language in adobe )) the question is how to install the arabic language

<moved from Downloading, Installing, Setting Up to Creating, Editing & Exporting PDFs>

Upload Adobe video to my site? {subject edited by moderator}

Hello! How are? I've got question,please.I create my own site and I want to upload on a site the video from Adobe.com.For example : video about "Dreamweaver" captured by Adobe. Is it legally?

Thank you very much. That's all right.
Отправлено с iPhone
23 ביול 2014, в 17:20, Preran <[email protected]> написал(а):
Upload Adobe video to my site? {subject edited by moderator}
created by Preran in Dreamweaver support forum - View the full discussion
Thanks for simplifying this for everyone, Murray.
Antimusic: While it is not possible to upload an Adobe video to your site, you can embed a video from http://tv.adobe.com using the embed code for the video. Is that what you were looking for?
Thanks,
Preran
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6576208#6576208
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Dreamweaver support forum by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Unix version of Netweaver Dev Studio, Newbie question

Hi,
I have a very silly newbie question. Is there a unix version of netweaver developer studio and if so what is the path to the executable?
Thanks in advance
John

I don't think so. NWDS is built on top of Eclipse which is an open source project by IBM. Check out there site.
http://www.eclipse.org/
As of right now, I don't believe that SAP is offering a Unix version and I doubt that they will.
Regards,
Rich Heilman

WebDynPro Newb question

Hey All,
I need to begin working with WebDynPro. I have a couple of Newb questions:
1) I need to jump right in fairly quickly, so can anyone suggest any good documentation that could help me get the basics down about working with WebDynPro?
2) I loaded a Sample WebDynPro project into NetWeaverDev Studio, but I am unable to export this to our instance of EP on our Development Server. For a .par file its easy to do exports, but I can't for the life of me find where i go in NetWeaverDev Studio to do an export of a WebDynPro project. When I goto export in the WebDynPro perspective, it appears to only want to allow me to export locally, but I need to push to a different server. Can anyone help me with this?
I appreciate any advice and suggestions. Thanks All!!
Take care,
-Kevin

Hey Rich,
I have the Engine setup, but I do not get prompted for the SDM password, do I need to configure that somewhere? I get the following error when trying to deploy:
<i>Jul 15, 2005 10:13:17 AM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR:
[004]Deployment aborted
Deployment exception : Cannot determine sdm host (is empty). Please configure your engine/sdm correctly !</i>
Thanks,
-Kevin

Adobe Audition Help | Saving and exporting files (CS6)

This question was posted in response to the following article: http://helpx.adobe.com/audition/using/saving-exporting-files1.html

stvns wrote:
Just to re-iterate the first three minutes of my audio has a marker called Marker 01, then the next 3 minute section is Marker 02, etc, so when I select all the markers, merge them, set the prefix and postfix to Track and 001 respectively, and click export, the audio that should accompany Marker 01, now as an exported wav file is Track_099 and Marker 99 is Track_001.
Hmm... just one marker to start with? At the start or the end of the time selection? The only way that I think your scenario could happen would be by there being no marker at the very start of the file, but in that case I don't see how you could include the first section (from zero time) anyway if you did that, so I'm a bit dubious... What would happen in this scenario would be that if you put in markers starting at 1 from the end of the first section, it would have to add a final marker for the start of the file, and this would be, let's say, marker 99. So the first file would start with marker 99 - but that would effectively be at the end of the batch ranges - if you see what I mean. But my real problem with this is that I don't see how you could include the first range in the audio at all without a marker at both ends of it. Now, what might have happened is that if you forget, and add the start marker after putting in all of the rest, then yes, you will get the above scenario - because markers are added sequentially and renumbering doesn't occur.
I've not had this problem - but there again I always start with a marker at zero before I convert to ranges. What should happen then is that it will take the marker label from the start of the range, and use that. The other thing you should consider is using the facility to rename the files - that should get around this completely as far as straightforward numbering is concerned.

Newb Question for burning DVD/CDs

I have an external DVD writer on my iMac.
I got the thing last month and an completely new to Apple (sorta)
Now how do I make a data CD and DVD?
On Winblows XP all I need to do is select the files, right click and click on SEND FILES TO CD for making data CDs.
However for DVD I need 3rd party software.
Will iDVD do the trick?
Thanks for the looking at this simple newb question.
GeekyBoy

Now how do I make a data CD and
DVD?Drag the files to the icon of the
blank CD/DVD that appears in the
Finder.However for DVD I need 3rd party
software.You might want to try Patc
hBurn.Will iDVD do the
trick?No, iDVD is only for making video
DVDs and it requires a G4 processor.
Thanks for the tip Duane.
I was just reading abotu burning CD on another site. It mentions about what you said, drag the files to the CD.
However I am reading in my profiler that burning is NOT supported by OS X on this CD/DVD writer.
Will Patchburn or any other software overcome this?
Thanks

InDesign or Acrobat (newbie question)

Hi,
I tried posting this in the LiveCycle Designer forum, but I think it's a bit too much of a newbie question:
Once in a blue moon when I'm at work, someone will ask me if I can add text fields to a PDF form so that they can easily type onto it and print it out. I've always done that directly in Acrobat (on the few occasions that it's been requested from me). But I was curious about Adobe LiveCycle since it came with CS3, so I played around with it a couple of days ago. I added the text fields in LiveCycle this time, and it seems to have worked fine. Which is the better program for this kind of task? I'm not 100% clear on the *main* purposes of either program or how they compare. If anyone wanted to give me a clue about it, I'd appreciate it!
Thanks,
Phyllis

> I thought perhaps you could add that capability
You can (I said I was oversimplifying). However there are contractual
limits - to oversimplify (!) 500 users per form.
>Which would be preferable -- receiving form data from LiveCycle or Acrobat?
It depends what you want to do.
>
>I wish I knew what the difference was between these two programs. Is it purely a matter of emphasis on one task or another?
They come to the same problem in different ways. For a simple task
they may seem pretty much the same. Some differences:
* A form made in Acrobat is a PDF with form fields stuck on top; it
remains a normal PDF in every other way. Forms are almost always made
by preparing an existing PDF, then adding form fields.
* A form made in Designer is barely a PDF. It's a wrapper round an XML
file. You can no longer edit it in Acrobat, ever, even for the most
simple things. PDF files are imported and converted (sometimes with
loss of quality or features), or forms are made from scratch.
* Acrobat form fields are fixed size.
* Designer form layout can be dynamic.
Aandi Inston

Newbi, How can I Exporting to .jpg...?

Hi,
Newbi question.
Q1. I've just made all the adjustments to my RAW files; can anyone tell me how to export custom sized jpg's?
Q2. Is there a way to open up multiple images at a time in PhotoShop with all the adjustments made in Aperture so that I can print? I much prefer PS to print; I’ve printed the same image in both apps with the same settings and custom profiles assigned and PS produces the best colour accuracy.
Thanks in advance,
Simon

Both multiple exports to file and open images in external editor work the same way .....
click and <Apple> click your selects (or range using <shift> click or rubber band drag). There are menu items under edit which are useful (select to end, select to beginning, select all) and their keyboard shortcuts.
export to file
Once you have your selected items, right click and choose: export/export version (for your adjusted versions as you might have whole stacks selected)
output to PS
right click and choose:output to external editor. NOTE: you need to set your editor and path in advance in Aperture/Preferences. If you output more than one image, you will see a warning message saying you are opening up multiple images.
Aperture creates a new master for each PS image for the roundtrip, and when you save your adjusted image in PS, Aperture automatically refreshes (well buglet in 1.5.1 means you need to deselect and select some other image).
G.

MEGA-Newbie Question

This has to be the most newbie of all newbie questions. Interestingly enough, it is the one that is most rarely answered in a non-technical way that the novice can understand.
What exactly do I need Motion for? What, in common-sense, regular-language terms, does it do?
My manuals tell me how to do all the things it does. But they assume I am an experienced editor (I'm an experienced filmmaker, but only just started working in editing) who already knows all the things that CAN be done and only wants to know HOW to do them in Motion. This is not me.
So, say I am making a 90-minute HDV feature music doc. I have footage, I have stills. I will need captions, titles and text on screen. I will need an end credit roll. What is it I will probably want Motion to do for me that FCP can't do on its own?
I'd appreciate an answer in somewhat non-technical language that addresses the practical use -- from a filmmaker's point of view -- of this no doubt amazing program.
Thank you.

hi Paul,
You are right you can do much of the things Motion does in FCP, but Motion takes them further and often makes them easier to do.
Briefly whereas FCP is generally for editing moving pictures from rushes to a coherent whole, Motion is used to composite or layers of moving pictures to make a new coherent whole picture.
So i plain words, you can meld different sources of video, stills text and other sources together to make a new end peice. You can animate text, warp pictures, create fires, smoke, hide bits ( masking), animate graphical elements. In short whenever you need to layer up multiple sources of imagery Motion is your man. Sure FCP can handle a lot of this, but Motion is designed specifically and only to do this, and does it very well. ( You would not want to edit in Motion!)
In your 90 minute example you could do it all in FCP and make it look very nice. But you might need to go the extra mile with the title sequence, perhaps the captions will have some kind of generic strap line ( lower third) under All these things could be done easier and better in motion. However you would not want to import the whole 90 minute programme into Motion and start throwing captions on it. Rather you would want to build each element ( strap line, animating titles, opening sequence etc) in Motion and then import them into FCP for the final mastering. Motion is for short sequences, and FCP is used to collect them all into one programme.
I make music commercials for a living, do all the cutting on FCP and build all the graphic elements in Motion, take a look at my site for some examples if you'd like,
http://www.moojoose.co.uk
Hope this helps you
regards
adam

Buy License for single edition....newbie question

Hi, very new to this forum and DPS. I tried to click the "Buy licence for single edition" link on the left of the page, but was not provided with any cost information - only an adobe product notification page. I am a Adober CS5.5 Design Premium subscriber. Keen to know costings before I learn how to do all this. Cheers

it depends on the adobe store website and may be a legal issue too, because
you don't buy software but a licence here (in fact, sth. like a serial
number)
(mobil gesendet)
Am 15.10.2011 09:07 schrieb "JeroenVink" <[email protected]>:
Re: Buy License for single edition....newbie question created by
JeroenVink <http://forums.adobe.com/people/JeroenVink> in *Digital
Publishing Suite* - View the full discussion<http://forums.adobe.com/message/3972473#3972473>

A Adobe newbie question on site export..........

Similar Messages

Maybe you are looking for