A Background job in one of the step delays due to awaiting for Gateway
Hi,
We have the month-end jobs executing in our Production systems every last week of month
It was observed that, one BGD job took 30-45 mins delay to finish.
- In one of the steps, there is Parallel processing with 56 DIA work processes across 4 Application servers out of 6.
- It was observed that all these 56 processes were showing status ON HOLD (Reason RFC) when we checked.
- I went to the BGD job process (sm51) to see if the job is executing
- I saw the message - further awaiting for Gateway XXXX (Prod server)
- I checked in SM59 and all RFCs were OK
- Even in SMGW everything was OK
Please help me to find what exactly is the reason for the delays due to Gateways
Thanks & Regards,
Sameer
Hi Ashish,
The BGD job running on one of the work process indicated - "Waiting for Gateway XXXX (Prod system)"
Here when I checked the 56 DIA work processes, it indicated - ON HOLD & Status - RFC.
I need to know more on the Gateway mechanisim in this. Hope the problem was in the gateway connection for a temporary proceess
Else the system was OK. No improper functioning was observed.
Need to explore more on this.
Regards,
Sameer
Similar Messages
-
Highlight one of the steps of my roadmap programmetically
hi everybody,
I have a roadmap of MultipleRoadmapSteps. I want to highlight one of the steps
programmatically. Can anyone send me some sample code for that?
Waiting for valuable replies..Hi Mainak,
You can use the leadSelection of the node to which the MultipleRoadmapStep binds to to highlight an entry. In addition you need to set the selectedStep property at the RoadMap to mark this specific MultipleRoadmapStep as the one for which the highlighting should be done.
Best regards,
Thomas -
I wrote an install program (.exe) that is downloaded from a website. When run, it 1) leads a customer to browse to a directory, and 2) copies files (.exe, .dll, etc.) from a website to that directory. When I run, the installed program works.
What are the steps to make it seamless for a customer to use the install program and then use the installed program?
bhs67This site https://msdn.microsoft.com/en-us/library/vstudio/2kt85ked%28v=vs.110%29.aspx provides a basic description of the Visual Studio Windows Installer.
Near the bottom of the page is "You can unlock all the features of InstallShield by paying to upgrade to the full version of InstallShield." Where do I find info that describes the differences between the "free" and the "full"
versions?
bhs67
Hello,
The default feature does support the task for your requirement, so there is no need to pay for the other features unless you want to use some feature which is not free.
In addition, as this thread
InstallShield LE not available with VS 2012 RTM? shared, even through there is a link to InstallShield LE in the New Project dialog under Deployment solutions, but it belongs to third-party that I would recommend you consider posting this issue
at the following forum to get supports about InstallShield.
http://community.flexerasoftware.com/forumdisplay.php?133-InstallShield
Regards.
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
What are the steps doing a performance tuning for pertcular program
What are the steps doing a performance tuning for pertcular program
chk this link
http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
checkout these links:
www.sapgenie.com/abap/performance.htm
www.sap-img.com/abap/ performance-tuning-for-data-selection-statement.htm
www.thespot4sap.com/Articles/ SAPABAPPerformanceTuning_Introduction.asp
Message was edited by: Chandrasekhar Jagarlamudi -
How do I reset my secuirty questions??? I cannot remember one of the answers and cant download anything for purchase on phone
If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then you can try going to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you might see an option to send security question reset info to your rescue email address.
If you don't have a rescue email address then see if the instructions on this user tip helps : https://discussions.apple.com/docs/DOC-4551 -
One of my sons has an ipad mini and the other a larger ipad. The one using the mini needs a larger ipad for school, so they need to switch. They want to do so without losing their individual app progress. Can I simply switch the SIM cards?
SIM card has nothing to do with your Apple ID or apps.
IOS devices do not store anything on the SIM card.
BAckup everything on the iPads.
REstore tbe ipad from the backup of the other iPad.
REpeat for the other one. -
H/W: SPA3000
F/W: 3.1.20(GW)
Problem: The last digit repetition within the dial plan is not working for gateway 0-4.
Line 1 Dial Plan: (****|<#,xx.<:@gw1>|1747xxxxxxxx.<:@gw1>)
Dial "17474743246#" which works for gw1.
Dial "#17474743246" which also works for gw1.
Dial "17474743246" which doesn't work and actually goes through VoIP 1 but not gw1.
It results in I have to specify a fixed number of digits for gw0-gw4 in the dial plan or it won't works. This could be very difficult for international calls.
Is there any way to specify Interdigit Short Timer with <:@gw0>?
BTW, it's strange that I have to include (****) in the dial plan to enter IVR. Without it I can't even hear any sound coming from gw1 (SIPphone). Maybe the SPA needs a factory reset. The test dial plan might look like,
S:4,(****|*xxx.|[2-9]|xxxxx|*0<:@gw1>|1747xxxxxxx<:@gw1>|1408xxxxxxx<:@gw0>|xxxxxxxxxxxxxxxxxxxx.!)
The last barring sequence "xxxxxxxxxxxxxxxxxxxx!" is to make sure the Interdigit Short Timer works after the last digit dialed otherwise the number will be transmitted immediately which is not preferred.IMHO , if there's a need for you to include *** on the dial plan to enter the IVR menu there might be a need to reset the unit.
I believe that you can set the interdigit timer by including that on the dial plan ie: xxxxS0 just like on a hotline, i just never had a chance to try including that syntax when invoking gw0 on the dial plan , but i guess you may give it a try. -
Table name for background job with report, variant and step user id list.
Hello All,
I need to generate the list of scheduled backgroung job with the list of Report Name, Variant, Step User Id called. Please any one tell the SAP Table name from which I can get these data.
Thanks in Advance,
AmitHi Rohit,
Thanks for your reply. But from TBTCO, i can't find program/report name and variant. Just the list of background job i can see.
Regards,
Amit -
Background job terminated in LSMW last step
Experts:
When I run the last step in LSMW: 13 Start Direct Input Program,
I set a background job for Trans:BMV0,
But it goes an error:
"Job started
Step 001 started (program RMDATIND, variant....)
Could not open file xxxx.lsmw.conv
Job cancelled after system exception ERROR_MESSAGE"
could you tell me possible reasons for this error?thank you!Ichecked the file assignment in step seven.
what file path and name did you define for the converted file? is this located on your PC or on the application server?
did you execute step 11?
did step 11 tell you that SAP had written xxx records to the conv-file?
The file path is on the application server
yes,I executed it.
Transactions Read: 9,066
Records Read: 50,324
Transactions Written: 9,046
Records Written: 50,228 -
Background Job is not creating the List ID
Hello Experts,
I am scheduling a program as a Background Job. When I go and check the tables TBTCP & TBTCO, I see the List ID field (TBTCP-LISTIDENT or TBTCO-LISTIDENT) value as 0 .
Hence I am not able to get the Spool ID for this List.
Can anybody please let me know what is the problem?
Thanks a lot.Hi,
See, if this piece of code can help you.
data: sdate type sy-datum,
stime type sy-uzeit,
l_valid,
ls_params like pri_params,
l_jobcount like tbtcjob-jobcount,
l_jobname like tbtcjob-jobname.
start-of-selection.
Get Print Parameters
call function 'GET_PRINT_PARAMETERS'
exporting
no_dialog = 'X'
importing
valid = l_valid
out_parameters = ls_params.
Open Job
l_jobname = 'THIS_JOB'.
call function 'JOB_OPEN'
exporting
jobname = l_jobname
importing
jobcount = l_jobcount.
Submit report to job
submit <your_program_name
via job l_jobname
number l_jobcount
to sap-spool without spool dynpro
spool parameters ls_params
and return.
Kick job off 10 seconds from now.
sdate = sy-datum.
stime = sy-uzeit + 10.
Schedule and close job.
call function 'JOB_CLOSE'
exporting
jobcount = l_jobcount
jobname = l_jobname
sdlstrtdt = sdate
sdlstrttm = stime.
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Mar 3, 2008 11:09 AM -
Background job cann't open the Spool list, the error as below.
Hi, experts,
My background job 'Z1RM0063' couldn't open the spool list, the error as below:
' The selected section of the spool request 20,004
in SYSTME SID is empty.'
Who could tell me this is why ?
Thank you very much in advance,
B.R
MichaelHi Michael,
Its very difficult to tell... seems to be a custom job, what program is running?.. Does the spool that the job is trying to read still exists?...
Can you please post more details?
Regards
Juan -
What are the steps to be carried out for installing 0cca_cc1 - business
Hi All,
what are the steps to be done for 0cca_cc1 for installation of business content and then how is the data extracted from r/3?
- how to install nor use the standard queries and there are 2 update rules how to activate them too? for 0cca_cc1.
Pls let me know the url for standard datasource for 0cca_cc1
Thanks
PoojaGoto source system (e.g. R/3). Execute RSA5 transaction.CLick on SAP and press + symbol on the top. then press find to get your datasource. press activate datasource. This will activate your datasource. In RSA6 you will get the activated datasource.
Then in BI side you replicate your datasources and the installed datasource will be visible. Then create the data flow if not installed.
Delta is relatively a big topic. Refer following:
/people/swapna.gollakota/blog/2007/12/27/how-does-a-datasource-communicates-delta-with-bw
/people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
What you need to do from your end is create init infopackage, load the data. Once done create delta infopackage and load the data. If you are in 7.x then need to create DTP accordingly.
But just remember the datasource should be delta capable. In infopackage when you get only full option then you can say the datasource is not delta capable.
Edited by: Shailesh Naik on May 11, 2009 11:08 AM -
Can any one explain the steps to coinfigure PGP Encryption in B2B
Hello B2B Guru's,
Can any one explain how to configure PGP Encryption in B2B console?
were to specify path for loading pgp encryption jar in b2b console?
is it mandatory that PGP Encryption should have class to implement Call out interface?
which methods we need to implement in Call Out interface?
Thanks,Please refer :
How to configure Call out in B2B ? -
How do you retrieve the App Store Icon on a first generation ipad?
If you can't find it on any of your homescreens or app folders, and you can't find it via the spotlight search screen (swipe your first home screen to the right), then is it hidden by Settings > General > Restrictions > Installing Apps being set 'off' ? Is that the passcode that you are referring to, for the Restrictions screen ?
If it is and you don't know what it is then could anybody else have set it, and do you know if it was on the iPad when you last backed up ? If it wasn't then you can restore to that backup and it should be removed. If it was on the iPad when you last backed up and you don't know what it is then the only way to remove it is to reset the iPad back to factory defaults and you can then re-sync your content back to the iPad - you won't be able to restore to the backup as that will keep the code in place. -
I payed for two movies through iTunes store on my computer, after they were ready to be transfered to the iTouch from my
rental library, only one successfully went through. The other film completely disregarded the attempt to show even a 'loading' bar.no, i had to leave so i logged out and when i opened itunes on my mac and went into the downloads tab it only had one paused download listed. i resumed the download for the one movie listed and the other one never showed up. its been about two weeks since i initially bought the two movies so i figured something was wrong.
Maybe you are looking for
-
DEVOLUÇÃO DE EXPORTAÇÃO - CFOP 3201 - GRC VALIDA DADOS DI.
Boa tarde a todos! Estamos em um projeto de NFE XML 2.00 e nos deparamos com o seguinte erro: Ao emitirmos um NF-e de devolução da mercadoria que se encontrava no Porto (devolução de exportação - CFOP 3201), a validação do monitor GRC informa que é n
-
Help! Games I play on my GX70 are suddenly laggy
Hi, so far I´ve played pretty everything on my GX70 with no problems, but suddenly every game I start to play gets laggy after a while. It lasts cca 20s, then the game runs smoothly again. After a few moments it gets laggy again, then runs smoothly.
-
Toward a Better Metadata Panel
Thank you, Adobe, for including us in evaluating LR4. By and large it is a wonderful program full of useful improvements. I do, however, have a long-standing gripe with the "Sync Metadata" diaglogue box. Working as a news photographer, captioning is
-
Question about declaring type as interface
Hi I am trying to get my head around declaring an object as the interface type (I think this is right correct me if I am wrong). Ok so I understand if I declare my object reference as the interface I will only get the methods of the interface defined
-
Hi all. I have been using the default OpenSSH client with the Mac OS X install since I made the switch from Windoze. I have been connecting to a linux server on my internal 192.168.1.x address space without a problem. However, I recently installed th