A better way to run .FMX from hyperlink

Dear all,
I am finding ways to execute .FMX from hyperlink in HTML. I tried to create a shortcut file (.LNK) that runs the .FMX and then using a hyperlink to refer that shortcut file. However, the browser prompts me for whether to run or to save the file every time. How can I suppress the dialog or is there any better way to do so?
Regards,
Derek.

How you created a shortcut file(.LNK)
How to call a form within a form using Hyperlink
I am new to Java and could anybody help.

Similar Messages

A better way to run a 7 day report?

Using Crystal Reports 11
I am hoping there is a better way of running a seven day report that i have to run weekly
In the report i have it set when refreshing the document, the "Prompt for new parameter values" comes up and there is a date field for start and end
This is how i did it
I made a formula called "Date" this comes from the closed date of our accounts
I made a Parameter Field "Start Date" with the TYPE field is "Date"
I made a Parameter Field "End Date" with the TYPE field is "Date"
I made a Select Expert Using data from the "ClosedDate" in the first drop down I picked "Formula" and used this as the formula
{WH_ACCTCOMMON.CLOSEDATE} in {?Start Date} to {?End Date}
Two things
1. Is there a way to have "Prompt for new parameters values" as the default checked off box when clicking "Refresh"?
2. Is there a way to only enter a start date and the refresh would just run 7 days without entering a end date?

Hi,
Here's a suggestion for question 1:
When you preview the report for 1st time there is no prompt window that asks you to select whether you wish to 'Use current values' or 'Prompt for new values'.
If the Preview window is open and you hit refresh again, this is when you get the pop-up with the above options. If you close the Preview window and refresh again, you would not get a pop-up and it will show the Prompt window instead.
For question 1, you can follow Alun's sugestions.
-Abhilash

A better way to deal with lost hyperlinks when converting Robohelp to Printed doc?

I have inherited a 750-page manual that is
"single-sourced" in RoboHelp X5. When I generate printed
documentation, all of my hyperlinks and converted to plain text.
Everytime we release a new version of the manual with any changes,
we have to re-generate, and then manually go into the MS-Word
converted document and re-create some 350 hyperlinks and page
number references. Somebody please tell me that there is a better
way to do this, or a better tool to manage single-source
documentation.

Another post has been raised relating to this problem. See
http://tinyurl.com/yvpaut
I am replying here is this is where most of the relevant
information is.
You found that using the Style Mapping template solved the
images problem but the document stopped generating at 450 pages.
That was sort of what I hoped for. Rather than go to the step I
will suggest in a moment, I suggested you try something else but
you never came back to the forum to indicate you had tried it, so
the assumption is you did and it worked. Patently it did not so
let's try what I would have suggested next.
On my website there is a topic on Print Issues and one of the
them covers Malformed Topics. Try looking for <p
style="mso-bookmark: as suggested in my earlier reply in this
thread. You can try RH's Multi file find and replace but FAR from
http://www.helpware.net/FAR
may get better results. I think with this error you usually get a
message. Do you have the Output pane opened and have you read right
through it for clues? View | Output on the menu. Whether or not the
Output pane mentions this error, I would search for it anyway.
Other Points:
A] It could still be a resource problem. The document is very
large so, as Harvey mentioned, resources come into it. I know the
PCs that won't play nicely have good resources but whilst I am no
expert in this area, don't foget XP is using more of them leaving
less available to you. It could be an issue but I am inclined
towards it being something else.
B] I also suggested a hunt for a rogue topic.
"What I would try is copying your layout so that you have
three versions of it. Then delete two thirds from each one. If all
three work fine, it sort of confirms that size is a problem. If one
fails, your on the track of the rogue topic."
Did you try that? Like I said, if all three work fine, then
we are back with the resource problem but we will have ruled out
other issues. It should take less than fifteen minutes to set that
up. Longer to run it but you can be doing something else at that
point.
C] On FrameMaker, no real answer but you will soon see
evidence that Adobe are continuing to better integrate all the
products we are using. I don't think you will see what you want in
the upcoming version though.
NEXT:
1] Please search for <p style="mso-bookmark:
2] If that fails, try creating the three layouts.
3] Then post back how it went. If unsuccessful, tell us if
the Output pane gave any information about things the process did
not like.
Let us know either way as if one succeeds and you post that,
it helps the next person with the same problem.

New in Oracle Web form 9i : How to run fmx from web and login

oracle form 9i from web.
I am new in oracle form 9i (web form). Before I use oracle form client 6i. Just set icon with command (D:\ora6i\BIN\ifdbg60.EXE MYFORM.FMX). The login will be prompt out and user can log in to run many oracle 6i forms from oracle menu. In Oralce form 9i designer, I can open form designer and use run form from IE.
1. How can I depoly these form with menu to other users.
2. How can I define the url link to public (Application Server)?
3. SHould there is any login prompt from web usage.
Tks.

solved.

A better way to wake up from sleep?

When my mac pro goes to sleep, I cannot wake it up by clicking mouse, hit keyboard, etc. I have to push the machine's power on/off button to wake it up. I assume there is a better way. Thank you in advance.

Also, try a SMC reset.
The following will help you with the repair Hatter is telling you about;
Try using Disk Utility to do a Disk Repair, as shown in this link, while booted up on your install disk.
You could have some directory corruption. Let us know what errors Disk Utility reports and if DU was able to repair them.
 DALE

I have an ipad, and want into replace my laptop with it. Is there a way of running iTunes from my ipad to allow me to put music onto my old ipad classic without the need for a computer.

Please help me on this issue. I have the latest full size ipad with retina display and want to replace my old hp laptop with it. I currently run an iPod classic and nano from the iTunes on it, but i want to run them off my ipad. Is this possible.

The iPad is not a computer, it cannot replace one, and it cannot sync music or media to other devices.
You need to keep a computer around if you want to sync ther Classic and Nano. It may also be useful if you ever need to backup the iPad in case a restore is necessarry.

A better way to print text from within java ?

Hi, I want to make an app that brints out a bill (part of a bigger project for school) and I already know how to make my object printable and print it, but the "problem" lies in the graphics (or graphics2D) object that the print function uses to draw on the printable.
The bill contains large amounts of text and as far as I know graphics and graphics2D only have drawString() as method to draw a string, and on top of that it does not support the newline char, so is there a way to print large amounts of text in another way ?
also, since I'm using numbers and currency, would it be possible to alight text, so that it ends up like this:
name of item 100.00 Euros
name of other item 1.00 Euronicely aligned to the left for the names, and to the right for the numbers, the problem is that i'd like to keep that in a nonfixed width font, so calculating the needed position will be hard.
thanks in advance,
Boran.

Within the 2D Graphics system there are methods for dealing with this. Check out the AttrributedCharacterIterator class and the TextLayout class. A good read is
'Java 2D Graphics' by Jonathan Knudsen published by O'Reilly ISBN 1-56592-484-3 .

What's the best way to run Logic Pro from external hard drive.

What's the best way to run logic from external hard drive

Hi
Organism wrote:
Logic is designed to run from your Applications folder. I suspect if Logic was moved to an external drive, it might not be able to locate its assets, like loops and libraries.
As long the necessary files are in the correct places on the boot disc, you can run the Logic application itself fom wherever you like. It would not be recommended however, and there would be very little benefit (if any) in doing so.
CCT

What is the most reliable way to run one Windows accounting program in Osx 10.5.8?

I have a simple Windows application where I basically do my accounts. I do not want to tie up my Imacs resources with running a full Windows Os "emulation" like Paralells or VMware Fusion just to run a simple accounting program.
I have heard about apps that can run one windows application at the time through a kind of Osx Application which emulates windows some how. Is is true that this is a better way of running my accounting program? Is it reliable? What I do is to punch in invoices and print out reports basically. How much resources does this "consume" to run it in "one simple application mode" in comparison with for example Paralells?
And what is the term for running windows in "one simple application mode"?

I guess you could try the free trial of CrossOver. http://www.codeweavers.com/products/crossover/ You did not say what app you want to run so it is difficult for us to recommend crossover as being able to run the app.
But your question is that you are looking for the "most reliable" way to run a Windows program. In my opinion you need Parallels or Fusion. These run the real Windows OS so my thinking is it is the "most reliable" method of running a Windows app on an Apple computer, other than Boot Camp.
But you said you don't want Parallels. This is probably why you have not received any responses. You eliminated the most reliable and easiest method, in my opinion, when you initially posted. Parallels does not consume any resources until you start it up to use your app. You can close it after you are done with your app. Of course hard drive space is required for storing the OS, your app, and data. But you still need to store your app and data regardless of method you choose.
One more thing, Parallels and Fusion create a virtual machine for running Windows.
So my recommendation, use Parallels or Fusion.

Run Archlinux from USB-stick

Hi guys,
Is there are way to run arch from a usb-stick. (I don't mean installation)
Have a laptop that I want to just plug in a usb-stick and then boot and run from it!
Can it be done, and how?

Installing Arch Linux on a USB key:
https://wiki.archlinux.org/index.php/In … _a_USB_key
Mektub

The default location for iTunes is the ssd drive? How can I run iTunes from my 2tb hard drive?

I have recently purchased an iMac 27 i7 ssd256 2tbhd. I can not find a way to run iTunes from my 2TB HD. Can someone walk me through it ? I have tried youtube and google but nothing has worked so far.
I would like to sync my ipad and iphone to my new iMac.

I assume you mean to have your library on the external HD?
If so then you would go to iTunes -> Preferences -> Advanced -> "iTunes Media Folder Location" change it to somewhere on the external HD
Then after that do File -> Library -> Organize Library -> Check "Consolidate Files" and click Ok

When I listen to music on my iPhone and pause it, if I come back to it later, the playlist has started over. I have a 4S running on iOS 7.0.4. Is there any way to keep this from happening so that my playlist will start off where I last was?

When I listen to music on my iPhone and pause it, if I come back to it later, the playlist has started over. I have a 4S running on iOS 7.0.4. Is there any way to keep this from happening so that my playlist will start off where I last was?

Dear Jody..jone5
Good for you that can't update your iphone because I did it and my iphone dosen't work for example I can't download any app like Wecaht or Twitter..
Goodluck
Atousa

I have a macbook running 10.6.8 is there a way to transfer docs from that computer to iCloud

I have a macbook running 10.6.8 is there a way to transfer docs from that computer to iCloud with out using a third party app like dropbox?

Yes - if you have the iWorks apps or apps that support iCloud and if you have iCloud setup on the iPad correctly. You do by using Safari on the Mac.
If you have Pages on both devices - you can log into iCloud.com on the Mac. Sign in, and click on the iWorks icon in the browser window in Safari. Then click on Pages at the top in the next window. Then drag your Pages document from the Mac desktop onto the browser window and the document will be available in Pages on the iPad when you launch it.

Looking for a better way to determine string variable from multiple options

Hi,
I trying to figure out a better way to determine a string variable from multiple options.
Say i have five pictures each with a different filename: img1 - img5...these file names could be named anything really but for this example i will keep them as img1, img2, img3, img4 and img5.
I want to display a messagebox with the string depending on what a certain variable is.
So for example, we have the number X, if X = 1 then i want the messagebox to show "img1" as the message
Essentially the way I have been doing it so far is:
Private Sub WhichImage()
Dim ImageName As String = ""
Dim i as integer
If i = 0 Then
ImageName = "img1"
End If
If i = 1 Then
ImageName = "img2"
End If
If i = 2 Then
ImageName = "img3"
End If
If i = 3 Then
ImageName = "img4"
End If
If i = 4 Then
ImageName = "img5"
End If
MessageBox.show(imagename, "Name of image", MsgBox.Style.OkOnly, MsgBoxResult.Ok)
end
Up until now, this has been fine, but what if I have 50 images, do I have to do this for all 50 images? or is there an easier way like putting the image names into a text file and have it read from the file depending on what the variable i equals? If so,
how do I go about this? Does each image name go on a separate line? can it just be separated by a comma instead? or is there a better way?
Please note that i know that i have declared "i" above in my code and not intialised it with anything, in reality "i" comes from somewhere else in the program so please ignore that part, it is not what I am concerned with.
Thanks
Mersec

Does each image name go on a separate line? can it just be separated by a comma instead? or is there a better way?
Arrays are useful for this.
Dim imagenames() As String = {"img1", "img2", "img3", "img4", "img5"}
Dim imagename As String = imagenames(i)
MessageBox.Show(imagename, "Name of image")
Any sort of collection will do instead of an array, and may be simpler to manage. There are many other options - the most suitable one probably depends on where the names originally come from. For instance, if you are getting them from a folder
using the FileSystem.GetFiles method, then they are already in a collection.
If the files names never change then you may as well include them in the program code, using something like the code above. If they can change, then you could use a text file, but that means you need a file update routine. If that is required
then the way you store the names will dictate how you access them.

Is there any way to access files from the Classic environment to my iMac running on Leopard (10.5.8)?

Is there any way to access files from the Classic environment to my iMac running on Leopard (10.5.8)?

Sorry, no.

A better way to run .FMX from hyperlink

Similar Messages

Maybe you are looking for