A big problem: camera roll doesn't work

I cannot use the default "camera" to take photo. When I press the "taking photo" button or "volume + " button, the "camera" app would turn off and as a result return to the background.
I cannot really delete the photos in the camera roll as well. When I delete a photo in camera roll, it temporarily can. But when I close the "camera roll" and open again, the deleted photo appears again.
I cannot use ("power button" + "home button") to capture the screen as the screen picture captured will not appear in the camera roll.
I tried to turn the phone off and turn it on again, but the problem is still there.
In the "setting" --> "General" --> "About my phone", under "video" and "photo" categories, Normally, they would display the numbers which states respectively how many videos and photos that I have in my camera roll. But now they both display "2,147,483,647".
Before, I have connected the phone to the computer using USB wire in order to import the photos from the phone to the computer. I don't know whether this caused the problem.
How can I fix it? Please help.
Can restoration help? I used iCould to backup. Can I restore all the data and setting, including all the data in all the apps ?
THANKS!!!!
PS: I am using iPhone 4 and iOS 5.

Your Camera Roll is corrupted. I don't know why or how, but if you can't delete any photos from it and it doesn't import photos via the cable about the only thing you can do is restore the phone.

Similar Messages

After 2 weeks using ios5 camera roll doesn't work I can't see Photos inside

After updating my iPhone 4 to ios5 first I did was organize photos from the camera roll in differents folders. These folders disappears automaticly after some days and now everytime I try to see a photo from the camera roll or from the camera after take photo the app close and return to the main screen.

Your Camera Roll is corrupted. I don't know why or how, but if you can't delete any photos from it and it doesn't import photos via the cable about the only thing you can do is restore the phone.

Big problem-iPod setup doesn't work

I just got a replacement iPod cause my other one got jacked up, and everytime I try to set-up my iPod so my computer will recognize it, the setup restarts my computer to continue the setup and then when it comes back on, the set-up never continues. This didn't happen the past two times I had new iPods I don't get it!!

Yeah I have had the exact same problem with all three of my ipods (have had to send it back twice for different problems). How I eventually get it to work is install Itunes without attaching the ipod (once it formats for windows and then re-starts again) and then go through the rest of the setup without it being attached. After the software is installed I use the updater which refomats the ipod and the Itunes usually recognizes the Ipod. It's so weird though as I just got my new one last night and I am going through this whole stupid thing again. My computer re-starts as soon as it beeps to signify the ipod being attached. Drives me insane! Don't know if that will help and we should not have to do this. I have had this problem from the moment I tried to install my first one.

HT5815 Got the OS X 10.8.5 supplemental update but my camera still doesn't work :(

Hi,
Before I even got the OS X Mountain Lion 10.8.5 update, my video for skype was not working. Facetime was not working as well, but photobooth did. After the update however, I get the message "There is no connected camera" for every application. I even got the supplemental update which was supposed to fix the camera problem but it still persists. Help, please!
Also, I'm not tech-savvy at all, so if you do have a solution, please try to explain in layman's terms, if possible
Thanks so much

There is a known issue with mid-2013 MacBook Air, OS X Mountain Lion (10.8.5). If your Mac is NOT a mid-2013 model, this issue does not apply.
According to Apple's technical support article entitled "MacBook Air (Mid 2013): FaceTime HD Camera might not work after OS X 10.8.5 update", Apple is investigating this issue.
In the meantime, a 10.8.5 workaround is at http://discussions.apple.com/thread/5306216?tstart=0
Before you applied the 10.8.5 update, (or if your MBA is NOT a mid-2013 model) you could have used the built-in iSight suggestions from http://support.apple.com/kb/HT2090 to troubleshoot your FaceTime HD camera problem(s). After getting the camera working in OS X 10.8.4, if you use a mid-2013 MBA, applying the 10.8.5 update and the workaround should have given proper camera functions.
However, at this point, try resetting the PMU/SMC using the directions for
"Resetting the SMC on portables with a battery you should not remove on your own"
from the HT2090 page reset instructions for MacBook and MacBook Pro before applying the workaround.
If your MBA is NOT a mid 2013 model, consider the other HT2090 suggestions, too.
If your camera still doesn't work, or if the above suggestions seem more complicated than you want to attempt, contact Apple, your Apple retailer, or an Apple-Authorized Service Provider for service.
Message was edited by: EZ Jim
Mac OSX 10.8.5

IPhone 4s glitches, is cracked, and camera flash doesn't work. What is the cost to exchange for a new one?

Front screen of my iPhone 4s is cracked, it freezes/lags, camera flash doesn't work, and every time you press a bit harder on the front screen red and grey vertical lines appear. I have had it for more than a year now, so how much will it cost for me to replace it?

These prices are for the U.S.
Out-of-Warranty Service
If you own an iPhone that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will service your iPhone for the Out-of-Warranty Service fee listed below.
iPhone model          Out-of-Warranty Service
iPhone 5          $229
iPhone 4S          $199
iPhone 4, iPhone 3GS,
iPhone 3G, Original iPhone          $149
A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in U.S. dollars and are subject to local tax.
When setting up out-of-warranty service, Apple will request credit card pre-authorization for the maximum service fee listed above. This amount will be deducted from your credit limit. The final service fee we charge will be determined during testing and may be less than the service fee listed above.
Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPhone that has failed due to contact with liquid may be eligible for out-of-warranty service.
Apple reserves the right to determine whether or not your iPhone is eligible for Out-of-Warranty service. iPhones that are repaired or replaced have a 90-day limited hardware warranty or assume the remainder of your standard warranty or AppleCare service contract coverage, whichever is longer. Please see Apple's Repair Terms And Conditions for further details.

LMS25 / Common Services 3.0 problem (dbpasswd.pl doesn't work)

Hi.
During CS3.0 installation I got an error:
ERROR: Unable to Change password for DSN cmf
ERROR: After install you can change the database password
ERROR: by running /opt/CSCOpx/bin/dbpasswd.pl
I tried to run /opt/CSCOpx/bin/dbpasswd.pl script, but got error again:
bash-2.03# /opt/CSCOpx/bin/dbpasswd.pl all
Please enter the new password for database cmf:
Please enter the new password again for verification:
INFO: Start changing password for database 'cmf'...
Starting database engine cmfEng
ld.so.1: perl: fatal: relocation error: file /opt/CSCOpx/objects/db/lib/libdblib9.so.1: symbol UnixForkProtection_Init: referenced symbol not found
Killed
I tried to set up LD_LIBRARY_PATH, tried to remove .profile, tried even to install solaris 8 from the scratch. It doesn't work even on fresh installation with 8_Recommended and all required Solaris patches. I tried also different installation disks with May 05 patches and without.
ldd doesn't show anything strange:
bash-2.03# ldd /opt/CSCOpx/objects/db/lib/libdblib9.so.1
libdbtasks9.so.1 => /opt/CSCOpx/objects/db/lib/libdbtasks9.so.1
librt.so.1 => /usr/lib/librt.so.1
libnsl.so.1 => /usr/lib/libnsl.so.1
libdl.so.1 => /usr/lib/libdl.so.1
libc.so.1 => /usr/lib/libc.so.1
libxnet.so.1 => /usr/lib/libxnet.so.1
libm.so.1 => /usr/lib/libm.so.1
libaio.so.1 => /usr/lib/libaio.so.1
libmp.so.2 => /usr/lib/libmp.so.2
/usr/platform/SUNW,Sun-Fire-V440/lib/libc_psr.so.1
libsocket.so.1 => /usr/lib/libsocket.so.1
bash-2.03#
We have same LMS 2.5 on another server ( same model, same operating system, same patches) and it looks fine.
Could somebody explain how to debug and solve this issue?

Hi.
Also /opt/CSCOpx/selftest/database.pl didn't work with same error message.
I found the cause of problem. I have reproduced this error in test environment. The problem was in 8_Recommended patch cluster for Solaris 8. Patch cluster downloaded in September doesn't cause any errors, but after new patch cluster installing ( late October) CiscoWorks stops working. The reason for it is 109147-39 patch ( linker patch for Solaris). Older version 109147-37 doesn't cause an error in database manipulation. It is enough to run roll back this patch and 2 patches depended on it ( 108652-92, 108773-19). So command "patchrm 108652-92;patchrm 108773-19;patchrm 109147-39" solves the problem.

HT4101 The Lightning to USB Camera Adapter doesn't work

I just bought the Lightning to USB Camera Adapter but it doesn't work and show the message: it is not an authorised accessories..may not work reliabily

the adapter doesnt work with ios 7 on a lot of new devices, so untill apple fixes the issue, here is a workaround http://www.youtube.com/watch?v=pE28JwxQ3Zc

IPod to TV using digital camera cable, doesn't work. Help

Hey
I've got the iPod 5th Generation 30Gb video. I ripped one of my DVDs onto my computer and then used videora to convert the DVD for use on the ipod. I used iTunes to stick the movie on my iPod.
The movie plays fine on the ipod, but when I go to connect the iPod to my LG Flatron TV it doesn't work. I am using a cable that came with my digital camera, it only has one black and one yellow rca plug. If I use it with the camera, the black is for video, and the yellow for audio. But on the ipod, I don't get anything. I have checked that the send to TV settings are On.
I've tried changing the format on the output from PAL to NTSC, nothing.
One thing I am not sure about is why my cable has got a little box thingy surrounding part of the wire, inside the box thingy are magnets, anyone know why these are here? Could this be what is causing it not to work. What should I do?
Thanks

Here is some info for the pinout for the iPod.
http://www.anythingbutipod.com/archives/2006/04/zen-vision-m-video-cable-other-4 pole-35mm-pinouts.php
You need to find the pinout of the camera cable you have.
Probably be easier to get get an AV cable with a 3.5mm plug to (whatever fits into your TV) cable.
Usually, you simply have to swap the Red and the Yellow for it to work properly.

The famous Pudding Camera App doesn't work on my iPod Touch with iOS 4!!!!

This is the famous Pudding Camera, http://itunes.apple.com/sg/app/id379411152?mt=8
it downloads and installs smoothly, but then when i touch the app, it opens and then disappears and goes back to the home page...
I've downloaded and reinstalled 10x, i've switched the ipod touch on, off, and reinstalled but nothing worked so far..
very upset and desperate now.. pls help..
Message was edited by: CantYouC

yup just tried.... and no it still doesn't work...
weird that when i check with my friends, they all say it works on their iPhone 4... just not my ipod Touch... !@#$%
and when i check forums for the past few days.. i don't see anyone complaining that this app doesn't work... and alot of reviews saying that it works on iPhone, ipod Touch, and iPad if i didn't recall wrongly...
this is terribly frustrating!!

Camera raw doesn't work on my new CS 6 ( offline computer )!

I have two weeks new, original Photoshop CS6 and today my Camera Raw has stopped working. I have a computer offline and it showed me a message to install a new plugin for Camera Raw. How do I get it? I paid about 3000 PLN and my program does not work! What's going on? why so making it difficult for people to live? is that I do not have access to the internet and not install stupid plugins means that I gave money away, and my job is to be in place by your policy? THIS IS NOT OKAY.

I am not sure why you were blocked from using ACR when you were online and didn’t update. You should be able to just close any updates message and continue on with your work, but I am not predominantly offline to know what happens.
However, there is a Preferences button in the Adobe Application Manager, the thing that starts up when you use PS / Help / Updates… and perhaps automatically if you’ve been offline for an extended period, to indicate which things to check for updates for. Just uncheck the ones you don’t want to have automatically check for.
It usually takes a few moments for the Updates… menu item to become active in the Help menu after starting up PS, so wait a minute to give it time. I don’t know what it does if you are offline, though, it may never become active.
If not, then try starting the AAM manually by running the PDApp.exe program on a 64-bit Windows, from:
C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\core\pdapp.exe
This is what I have after installing PS-CC on my computer, so maybe your app name is different since you don't have CC, but at least try running this if the Help / Updates... never becomes active when you're offline.
If Updates… doesn’t become active when you’re offline, then you might want to create a shortcut to this program somewhere to more easily get to it and tweak things as needed. It’d think you’d want to enable updates when you planned to be online and have time to do them so disabling the PDApp, entirely, probably isn’t a good idea.
Here is what I see when I look at the AAM preferences, where the Camera Raw checkboxes are at the bottom.
I have PSE11, PS-CS6 and PS-CC 14.2 all installed so have multiple camera-raw plug-in update rows, and I think Camera Raw 7 is the one for CS6 even though it is technically ACR 8.x, so you may only have that one:

Touch thinks it is a camera and doesn't work - please help!!

I've looked at the other threads posted here but nothing seems to work. My Touch is still recognised in the Device Manager as a camera and the screen on the Touch itself still thinks that I need to connect the USB cable to my Touch, even though it is already connected. I've tried updating the drivers with the driver in the C:\WINDOWS\system32\DRVSTORE\ folder, but that doesn't work either. Any other tips please?

lol you guys must be macking around with those cracks on the Internet...try to put your iPod to recovery mode and it should be fine, follow this:
- Make sure the phone/touch is on. The phone/touch must also be docked or plugged in to your USB cable.
- Press and hold the Power and Home buttons on the phone until the screen shuts off.
- Release the Power button immediately. Keep pressing the Home button.
- You should see a number of horizontal lines invade the now-off screen, and it will be slightly disturbing. If you just see just flat blackness turn your phone back on and try again.
- Your computer will recognize an "Apple Restore (DFU) Device". Open iTunes and it will complain about needing to restore.
- Now just restore and everything will be back to normal.

Helix rear camera update doesn't work correctly

The update gfc214ww.txt for the helix camera has only a correct update for the front camera - the update for the rear camera doesn't work.
There isn't any inf-file for the 5M-rear-camera.
After the update the version 1.0.0.78 should appear in the devicemanager, but it's the old driver from 2006 from microsoft.
I think there is something missing in the installationfile:
.../CAMERA/5M_Drv
With the old driver the rear camera is very slow, like a old webcam, which show's the pictures through internet - especially it's very slow, if you change resolution to 5M.
Is there any solution?
Kind regard
Dieter

In Windows go to the control panel/system/device manager & select each of the affected devices (one at a time) and use the 'rollback to previous driver' option.

Weird problem: apple-F doesn't work in Finder anymore!

I've just noticed 2 really weird problems. When in Finder, hitting apple-F (to "Find") doesn't work - I see the File menu blink for a second but the window to search for files never comes up. Also (and perhaps related?), since the latest set of Apple upgrades, when I run iTunes, it doesn't see my library. The newest version runs, but never brings up its main window. The older version does bring out its window but my music doesn't appear there. What the heck is going on?!? Anyone have any suggestions? Thanks,
Mike

Well, first, the likely fix for your Command-F problem (and other problems you've probably been lucky enough not to stumble upon just yet) is to fix permissions. But you'll probably find you can't do that in the first place until you do the main fix discussed in that large thread.
Join the crew.
owen

Can anyone help with iPad problem- Camera roll?

When I take a photo on my iphone, the photo goes into my photo stream and appears on my shared mac camera roll but does not appear on my ipad camera roll. However the photo does appear when you click from albums to photos. Not sure what has happened it use to go into camera roll all other devises ie iphone, ipad and mac laptop. I have gone into setting and all is ticked correclty. Can someone help please.

In many ways, I don't think IOS 7 improved the experience with Photo app but it is what it is. I shoot both with my Iphone and with a camera using an SD card and upload with the CC to the Ipad, so i have two different issues with Camera roll.
By experimentation I have found that a jpeg file MUST be in Camera Roll on the Ipad to be considered 'saved' and backed up in Icloud. Photostream will bring your jpeg photo from the Iphone to the Ipad but it is NOT YET in your camera roll. To have that done, by simply putting it in an album it is placed in Camera Roll. That's the simple thing to do. If you process it in a 3rd party app like Snapseed it will save back to your Camera Roll, so doing either of these two things places that file in Camera Roll, but no where do you get this information unfortunately.
For those using an SD card to import a RAW file, you need to process in a third party app, save to photo app--generally the default is as jpeg, and it will appear in the Camera Roll. I don't shoot with my camera in jpegs so can't describe that but I'm rather assuming that if you select the file, save to an album, that it will appear in the Camera Roll. A word to the wise--if you are importing raw files to the Ipad and processing them you will end up with two photos in the "photos", the raw and the jpeg. To cut down on storage, delete the raw which is the one to the right of the processed jpeg file. I do wish Photoapp would give us some EXIF data on shots but if it isn't apparent which is which, I've determined (by using apps that show the EXIF) the processed jpeg that you ordinarily wish to keep on the Ipad is always to the left of the raw, or 'first' in the photo mode
Another way to move from iphone to Ipad, especially video (which doesn't Photostream), is to use Air Drop and the file will automatically go into Camera Roll.
Hope this helps. I've had to explain this to my husband also and show him by demoing so I've been down this path before LOL.

IPad 16GB screen problem. Screen doesn't work as it should.

Dear all, I would like to share with my issue. I got an IPad as a gift and started to use it... My happiness last one hour as after that on my eyes the screen started to show picture in green color and as if you watch TV with bad antenna. I would be happy to get this device back to the store, but there's a small issue. I'm located in Russia and to send it back to the store would be not easy. I wonder if I'm the only unlucky man with such a problem and are there any ideas if it is hardware or software problem. I assume it looks like bad connection between screen and main board... I made a video with my cell, but the quality is not as good. this is the link http://www.youtube.com/watch?v=kbk1enRFISY/watch?v=kbk1enRFISY
Please help! I would love to solve this issue ASAP. Maybe there's the way to test IPad hardware in a special mode...
Thanks!

I bought two iPads one week ago in Orlando Florida. I have been using one of them for a week with no problem. Last Sunday I return to my country (Argentina) and when I tried to sync my iPad with itunes, it was imposible. Tried everything but nothing happend. I think the usb internal chip of my ipad has a failure. Then I connect my other iPad. it worked fine for 20 minutes, and then i noticed the screen issue that you talk about. So I have two new iPads and both with technical failure. I am very dissapointed. The big problem is that I don't live in USA. So, what should i do??? Please, tell me if you find a way to get the iPad repaired. Thanks!

A big problem: camera roll doesn't work

Similar Messages

Maybe you are looking for