A big problem that isnt being answered

my ipod nano 2gb (1st gen) and itunes are all up to date and It's all worked togeher fine, but today I connected it to the comp. and it doesnt even detect it. The ipod doesnt even say its charging, but when i connect it to a charging dock it works fine. help me please. oh and i cant get it to go into disk mode (center button + play/pause). help me please.

yea i reposted somewhere else and I solved the problem...even if it does cost me money >=\

Similar Messages

I got a big problem that iPlanet 6.0 SP2

Hi,
I got a big problem that iPlanet 6.0 SP2 is in cycle of restart.
The web server's error logs is the following:
[16/Jul/2002:00:30:05] info ( 8545): successful server startup
[16/Jul/2002:00:30:05] info ( 8545): iPlanet-WebServer-Enterprise/6.0SP2 B11/13/2001 00:49
[16/Jul/2002:00:30:09] info ( 8599): Installing a new configuration
[16/Jul/2002:00:30:09] info ( 8599): [LS ls1] http://xxx.xxx.xxx.xxx, port 80 ready to accept requests
[16/Jul/2002:00:30:09] failure ( 8599): Error accepting connection -5928, oserr=130 (Connect aborted)
[16/Jul/2002:00:30:09] info ( 8599): A new configuration was successfully installed
[16/Jul/2002:00:38:14] failure ( 8545): Child process admin thread is shutting down
[16/Jul/2002:00:38:16] info ( 9053): Installing a new configuration
[16/Jul/2002:00:38:16] info ( 9053): [LS ls1] http://xxx.xxx.xxx.xxx, port 80 ready to accept requests
[16/Jul/2002:00:38:16] info ( 9053): A new configuration was successfully installed
[16/Jul/2002:00:38:16] failure ( 9053): Error accepting connection -5928, oserr=130 (Connect aborted)
[16/Jul/2002:00:46:04] failure ( 8545): Child process admin thread is shutting down
[16/Jul/2002:00:46:05] info ( 9496): Installing a new configuration
[16/Jul/2002:00:46:05] info ( 9496): [LS ls1] http://xxx.xxx.xxx.xxx, port 80 ready to accept requests
[16/Jul/2002:00:46:05] failure ( 9496): Error accepting connection -5928, oserr=130 (Connect aborted)
[16/Jul/2002:00:46:05] info ( 9496): A new configuration was successfully installed
[16/Jul/2002:02:43:31] failure (15596): Child process admin thread is shutting down
[16/Jul/2002:02:43:32] info (16212): Installing a new configuration
[16/Jul/2002:02:43:32] info (16212): [LS ls1] http://xxx.xxx.xxx.xxx, port 80 ready to accept requests
[16/Jul/2002:02:43:32] info (16212): A new configuration was successfully installed
[16/Jul/2002:02:43:32] failure (16212): Error accepting connection -5928, oserr=130 (Connect aborted)
You can see child process is shutdown and restart it.
I don't know what's problem is.
And other problem is the following:
[16/Jul/2002:16:10:25] catastrophe (23966): Server crash detected (signal SIGBUS)
[16/Jul/2002:16:10:25] info (23966): Crash occurred in NSAPI SAF NSServletService
[16/Jul/2002:16:10:25] info (23966): Crash occurred in function direct_identityHashCode from module /usr/java1.2/jre/lib/sparc/libjvm.so
[16/Jul/2002:16:10:25] failure (23454): Child process admin thread is shutting down
[16/Jul/2002:16:10:26] info (24006): Installing a new configuration
[16/Jul/2002:16:10:26] info (24006): [LS ls1] http://xxx.xxx.xxx.xxx, port 80 ready to accept requests
[16/Jul/2002:16:10:26] failure (24006): Error accepting connection -5928, oserr=130 (Connect aborted)
FYI, here is our environment:
# /usr/java1.2/bin/java -version
java version "1.2.2" Solaris VM (build Solaris_JDK_1.2.2_07, native threads, sunwjit)
# uname -a
SunOS wagency2 5.6 Generic_105181-31 sun4u sparc SUNW,Ultra-4
Sun Enterprise 450 (2 X UltraSPARC-II 400 Mhz, 2G Memory
If you have any solution and experience, please let me know.
Thanks,
Barney Kim
[email protected]

Barney,
from the error log the problem seems to be related to the use of an external JDK. Try reverting back to the original JRE. See if that helps, i.e., the server starts up fine. Use the administration GUI and select Global Settings > Configure JRE/JDK Paths. On the screen that appears, you can configure the path to the JRE. The default would be <server-root>/bin/https/jre.
If that works fine, you might download a more recent version of the JDK. iWS 6 SP2 supports JDK 1.3.1.
Hope this helps.
Best regards
Rodrigo

Do the burning problems that are being reported lately

Dear All,
Do the burning problems that are being reported lately, affect itunes version 7.5 or lower on Win XP Home?
System specs:
HP pavilion a450n
Win XP Home
512 ram
128mb graphics card
Message was edited by: Cnon
Message was edited by: Cnon

Cnon wrote:
CasperGemini wrote:
Error messages from burning CD's are caused by a variety of reasons. Are you having trouble burning a CD in iTunes on your PC? If so, let us know the error code that you're getting. If you are trying to determine if you will have trouble buring a CD, the best suggestion is to just try it and see what happens.
CG
Dear All,
My cd burned fine, thanks
Cnon
It's playing fine in my player too
Thanks all
Cnon

Big problem that I guess I deserve.

Hey all.
Last night I disconnected my Ipod without ejecting it from my PC. Yeah, I know. Big mistake. My Ipod is now corrupt. Music and video has seemingly been erased, but there are still photos and I for some reason still have 23.1 GB free out of my 60gb.
The biggest problem here is that now, when I connect my Ipod to my computer, Itunes freezes and I will be blue screened within the next few minutes. If it miraculously doesn't do this, it just doesn't recognize my Ipod at all. I can't do the 5 R's here because of this, and I'm sure that would fix it. But, I need to get this fixed! Help!!!
Info you should know:
Running Vista business 32 bit
IpodService.exe IS running.
Itunes is fully updated.
Windows itself recognizes the Ipod but cannot really view the files. BSOD's occur.

It may now have an incorrect drive letter that is conflicting with something. Disconnect all USB devices except your iPod, keyboard and mouse and disconnect from any networks you might be on and then assign the iPod a new drive letter. Try M or P or Z. You also will probably need to Restore it in iTunes.
http://docs.info.apple.com/article.html?artnum=93499

Big problem that I have never heard of before...

My iPod had corrupted music files on it, so I decided to restore the whole thing to see if that fixed the problem, after restoring I had issues syncing my iPod again. I have about 2200 songs in my library and it would only upload about 150 or so before it stuck on the 150th or so song. It would say it was still uploading but I waited about a half hour and still nothing. I tried restoring the iPod multiple times, and one time my computer froze while restoring so I unplugged the iPod and when I tried to turn it on, it made a weird beeping noise. The backlight turned on but there was no display. Resetting had no effect on this problem. I tried to plug it in the computer to restore again, but the computer just said waiting for ipod to be ready.
I'm pretty sure it has to be serviced or replaced because of this problem, but I am not even sure if I am still within warranty or not. I do not feel like shelling out money that I do not have to repair this problem when it technically is not my fault.
I just would like to know what I should do.
Mac OS X (10.4.9)

Sorry no one jumped right in to solve your problem for you. I read your mind but I still couldn't tell when you got your iPod as it appeared to be empty.
You can go here http://www.apple.com/support/ipod/ and on the right hand side in about the middle of the page you can enter the serial number of your iPod and see what support options you have. If it is still in warranty if you will look up a bit you can do an online service request. If you live near an Apple Store you can make an appointment at the Genius Bar to have them look at it.
If it is out of warranty you can go to http://www.iresq.com to see about service, or use Google to find other places who work on iPods.
It does sound like you have a hardware issue, but you could try Disk Utility on it and do a Repair.

4 big problem that I didn't have with Audition 1

Hi everybody,
I have upgraded today from Audition 1 to Audition 3. I use Audition mainly for language studies (I'm a linguist). These are the problems:
1. When I select a sentence of 4 seconds length and try to apply Time Stretch (Slow down)in order to study its pronunciation and intonation, I hear less than 2 seconds in the preview!!!! When I try to listen repeatedly (loop) in the Edit view normally, the sound deteriorates!!!
2. My computer crashed 3 times since my installation of Audition this morning!!!!
3. When I am in the preview dialogue box, if flickers.
4. In Multitrack view, I can't arm any track for recording.
I have Sony Vaio, Hyperthreading Pentium 4 CPU 3.40GHz, 2Giga of RAM, 160 Giga of disk space and my soundcard is SoundMAX Integrated Digital Audio.
Help, please.
Thank you.
Yasin

Welcome to the new, improved Audition. Let's see, where to start?
Audition 3.0 is an ASIO-based audio program. It uses ASIO drivers only so if your SoundMAX sound card does not have an ASIO driver then Audition 3.0 can't use it. You need to go into Edit>Audio Hardware Setup and check to see if both Edit View and Multitrack View have the correct sound card, driver and default inputs and outputs. You should also go online and check to see if you have the latest drivers for your sound card.
Usually when you experience flickers or anything else display-related when using Audition 3.0 it has something to do with inadequate video card memory allocation. How old is your video card? There are usually programs working in the background on a computer that can interfere with Audition. Make sure you have as many of those programs closed as possible. Antivirus programs are particular guilty of running in the background and can be set to scan any file and program that opens on your computer. Audition could be in conflict with some other programs on your system.
Audition 3.0 is a much more complex and robust program than 1.0 and it is a leap from one to the other. It will take up some more resources in order to work. I suggest you look at the Frequently Asked Questions in not only the 3.0 forum but the 2.0 and the 1.5 forums. They are quite comprehensive and could very well answer some of your questions and give you tips on optimizing your system.

Two big problems that have effectively made my Lenovo 3000 N100 an expensive paperweight.

Okay, I have two problems with my laptop, which I know are unrelated:
1. My laptop's battery died about a month ago. It will not hold a charge, and unplugging the system will immediately shut off the system. This is identical to symptoms as per the battery issue attached to the top of the forum. However, this battery issue occured after even the extended warranty expired.
2. My laptop will now spontaneously, inexplicably shut down between 3 - 5 minutes after turning it on. It acts as if the system was suddenly unplugged.
Between these two issues, this has effectively crippled my laptop. The first issue limits it to the power outlet. The second makes it completely unusable. The system runs normally until it spontaneously shuts down. Because of the time it takes until it shuts down, I doubt I can use Lenovo's warranty check tool online. Because of this, I can't even get the serial number (as the warranty sticker is worn down to the point of illegibility.
First question: What can be done to repair it?
Second question: Is it under warranty? It is a Lenovo 3000 N100.
Please let me know ASAP. This is a very problematic issue for me, and I'm really unhappy that a less-than-two year old system has died, and I hope that this can be resolved.
Message Edited by TheEDFLegacy on 02-17-2009 07:53 PM
Solved!
Go to Solution.

Sorry message is for TheEDFLegacy....

I HAVE A BIG PROBLEM I HAVE NOT BEEN ABLE TO RECOVER THE ANSWERS OF SECURITY SINCE THE MAIL THAT APPEARS TO DO THIS MEAN I NEED TO CHANGE THE OTHER SHOULD I DO FOR THE TRUTH WILL MAKE A PURCHASE AND ME THE REQUESTS, AS IS A NEW PHONE EXPECT AN ANSWER

I HAVE A BIG PROBLEM I HAVE NOT BEEN ABLE TO RECOVER THE ANSWERS OF SECURITY SINCE THE MAIL THAT APPEARS TO DO THIS MEAN I NEED TO CHANGE THE OTHER SHOULD I DO FOR THE TRUTH WILL MAKE A PURCHASE AND ME THE REQUESTS, AS IS A NEW PHONE EXPECT AN ANSWER PROMPT AND POSITIVE
so I get looks but that is not my email recovery can help you reset your security information by sending a message to your email recovery: j ••••• @ mail.com

You need to ask Apple to reset your security questions; this can be done by clicking here and picking a method, or if your country isn't listed, filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(111384)

Hello all .. i have a big problem in my ipad version 5.1.1 that is when i connect the ipad with my computer the i tunes give me this message ( itunes couldnt connect to this ipad .an unknown error occurred (0xE8000012).) how i can solve this problem pleas

hello all .. i have a big problem in my ipad version 5.1.1 that is when i connect the ipad with my computer the i tunes give me this message ( itunes couldnt connect to this ipad .an unknown error occurred (0xE8000012).) how i can solve this problem please
and this is an pic for the problem

There is some troubleshooting for 0xE8 error codes on this page : http://support.apple.com/kb/TS3221 - you could see if anything on that page fixes it

Hi I've a big problem with adobe acrobat reader XI pro and I hope you can help me. The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reade

Hi
I've a big problem with adobe acrobat reader XI pro and I hope you can help me.
The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reader (adobe pdf reader, internet browsers, ...etc.).
This problem started to happen since yesterday when I installed adobe acrobat reader XI pro to try it before I buy it, and before that when I was using the free adobe pdf reader I was totally able to copy any text from any pdf and past it anywhere with nothing wrong.
What can I do?
thank you a lot.

There is no product called Adobe Acrobat Reader Pro. There is
- Adobe Acrobat Pro ($$)
- Adobe Reader (free)
Which do you have? And are you a programmer?

Search has encountered a problem that prevents results from being returned. If the issue persists, please contact your administrator.

Hello Guys,
I am creating resultsource from central admin. If I create it from central admin it works fine. But if I am creating result source from power shell scripts it shows me following error message.
An exception of type 'Microsoft.Office.Server.Search.Query.InternalQueryErrorException' occurred in Microsoft.Office.Server.Search.dll but was not handled in user code
Additional information: Search has encountered a problem that prevents results from being returned. If the issue persists, please contact your administrator.
Any suggestion ?
Thanks in Advance.

Hi,
Please provide more specific information about the issue. What type of content source you tried creating via powershell?
Make sure you are using the approproate permission and search service application.
Here is the reference for creating content resource via script:
http://technet.microsoft.com/en-us/library/ff607867(v=office.15).aspx
Regards,
Rebecca Tu
TechNet Community Support

Hello apple I have the problem with my iPhone and my friends have this problem too. My iPhone have the problem about calling and answer the call. When I use my iPhone to call I can't hear anything from my iPhone but the person that I call can answer it bu

Hello apple
I have the problem with my iPhone and my friends have this problem too.
My iPhone have the problem about calling and answer the call. When I use my iPhone to call I can't hear anything from my iPhone but the person that I call can answer it but when answer both of us can't hear anything and when I put my iPhone to my face the screen is still on and when I quit the phone application and open it again it will automatic call my recent call. And when my friends call me my iPhone didn't show anything even the missed call I'm only know that I missed the call from messages from carrier. Please check these problem I restored my iPhone for 4 time now in this week. I lived in Hatyai, Songkhla,Thailand and many people in my city have this problem.
Who have this problem??

Apple isnt here. this is a user based forum for technical questions. The solution is to restart, reset, and restore as new which is in the manual after that get it replaced for hard ware failure. if your within your one year warranty its replaced if it is out of the warranty then it is 199$

TS4040 I assumed this would help my problem with not being able to open apps like Preview or TextEdit since I installed Mountain Lion. Instead, first I'm prompted to enter a password, then once I do that, I get an error box telling me the Library needs re

I assumed this would help my problem with not being able to open apps like Preview or TextEdit since I installed Mountain Lion. Instead, first I'm prompted to enter a password, then once I do that, I get an error box telling me the Library needs repairing. So I click on Repair, and once again I'm prompted for a password, which I enter, then the same error box opens, and so it goes. Can anyone help me with this problem? I'd greatly appreciate it.
Thor

Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Step 1 should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary, and if everything is working as expected after step 1.
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Everytime I use IE, first I have to click on the IE bar to allow blocked contect to display. What is the content that is being blocked from IE? viewers may not know what the problem is and see my site totally out of format.

Everytime I use IE, first I have to click on the IE bar to allow blocked contect to display. What is the content that is being blocked from IE? viewers may not know what the problem is and see my site totally out of format.

discoveriweb wrote:
This is iweb development where after publishing, things look different in IE than other browsers. U r correct that this is due to IE software but is iWeb related. After all, one uses iweb not to just publish in Safari but for all browsers.
Which means that you are only considering half of the problem, but that's your choice.
I'm out.

Just setting up iCloud on my iMac, my problem is when trying to sign out/off from iCloud it comes up with a verification code that is being sent to my land line, I'd changed the numbers in my Apple ID and they show as changed but the land line number stil

Just setting up iCloud on my iMac 10.9.2, my problem is when trying to sign out/off from iCloud it comes up with a verification code that is being sent to my land line, I'd changed the numbers in my Apple ID and they show as changed but the land line number still shows as number that the verification code is being sent, I prompt "Don't have access to this phone" and that's no help at all. The only way I can sign out /off from iCloud is to uncheck everything that I wanted to keep in the cloud????
Thanks in advance for any help.

Skip the iCloud sign in for now.
Once you reach the home page, go to settings and sign out of FaceTime and Messages. This should also sign you out of iCloud.
Go to iCloud in settings and sign in with the correct Apple ID.
If that does not work
Skip the iCloud sign in
Go to Apple ID.apple.com and sign in
Change your Apple ID to the old one
Delete iCloud account on your device with the old Apple ID and the same password.
Go back to the website, change your Apple ID back to the current one. You will receive an email to verify the account. Verify first.
Sign into iCloud on your device with the correct Apple ID and password

A big problem that isnt being answered

Similar Messages

Maybe you are looking for