A Big thanx to Sean Reilly

Hi Sean.
My Enermax PSU arrived this morning. woohoo.
After a few hours of stressing the PC with Unreal Tourny 2003 and some serious overclocking I can safely say my problems have been solved.
cheers Mate.
Mebbe a sticky on this forum as well about the q-tec pieces of junk would be a good idea.
This PSU rocks btw..  Its so quiet.
Laters
Kujoy

Well Thank You Very Much, But I must Convey this Thanks to "Danny" The Moderator , As Danny Is the One that Actually Turned me On to how Good the Enermax PSU's Really Are, I say this because Believe it or not Enermax is Not that Recognised in the USA, as ANTEC and PC Power and Cooling Have the US Market Wrapped Up , And I am Very Glad that he has Pointed me (And now Others) to the Benifits Of the Enermax PSU .........But Thank You Anyway Kujoy, And I'm Glad that You Like your New Enermax................Sean REILLY875

Similar Messages

  • HT1553 Hi, I'm stuck at step 9. I don't see my external harddrive when I want to save the DMG backup file. Can you please help me with this? I'm desperate to make this backup! Big thanx in advance!

    Hi, I'm stuck at step 9. I don't see my external harddrive when I want to save the DMG backup file. Can you please help me with this? I'm desperate to make this backup! Big thanx in advance!
    http://support.apple.com/kb/HT1553

    Repair permissions and restart your computer.  If this does not work, zap the pram.  You should now see your external hard drive. 

  • How to install "Compact FieldPoint Embedded Data Logger Example Program" on cfp2200

    i finally managed to get max to see the devices of my cfp2200.
    (i had to disable every unused networkadapter due to overlapping subnets)
    now i want to deploy the example programm "Compact FieldPoint Embedded Data Logger Example Program"
    http://zone.ni.com/devzone/cda/epd/p/id/3221
    i therefor have tried to install the runtime 8.5 on the target. however this is not possble, because i have labview 2010 installed and it gives the message:
    "the host has a newer version available"
    ok. runtime 2010 should work to - not?
    i open a new project - import my *.iak-file and drag-n-drop the content of "cfp_data_logger_source.zip" onto the target.
    now if i open the file cFPEmbeddedDataLogger.vi the run-button is cracked and by pressing it an errorlist opens.
    the errors say stuff like:
    target does not support this function/subvi
    and
    vi has been modified with a different applicationinstance
    please help me to make this work.
    i know that it is possible to get the programm to run on the cfp2200 even dough it is primaly designed for the   cFP-2000, cFP-2010, cFP-2020, cFP-2100, cFP-2110,
    cFP-2120.
    big THANX already for you help !!!!!

    Hi, thanks for your help=) I've manage to drag the file into my targeted controller. I am now doing the setting of the data logger program, but there's one thing I'm unsure of. May I know what does it mean by the cFP controller clock? http://zone.ni.com/devzone/cda/tut/p/id/3219 . Thanks. =)
    Log On Startup
     Start logging when the controller powers up.
    Start Log Time
     The time to start logging.
    Stop Log Time
    The time to stop logging.
    Note: Make sure the clock is set correctly on the controller. The settings described above refer to the cFP controller clock.
    Log Rate
    The number of milliseconds to wait between each acquisition.
    FP Drive For Data Files
    The drive to store the log files in. The C: drive is the default for all cFP controllers. If you want to save to the removable CompactFlash drive on the cFP controller, select the D: drive.
    Digital "Pause" Line
    The Digital Input item to use as a "pause" button for data logging. Logging pauses when the signal is high. When the signal goes low again, a new file is created and logging continues if appropriate.
    Note: Use only Digital Input items for the Digital "Pause" Line.
    Tip: You can use DIP Switch 3 to block the current data from being logged. This switch works the same way as the Digital "Pause" line.
    Logging Session Tag
    Is stamped on the spreadsheet that the data logger creates.

  • Setup.exe does not execute - Oracle 10g on windows xp!?

    Hello,
    I have a problem while installing Oracle 10g Release 2 on my XP-prefessional machine (including service pack 2). By doubleclicking the autorun-file the openingdialog pops up, but after I chossed Installation nothing happens - the same by starting the setup.exe - also from the dos-box. I shut down my AntiVir and the ZoneAlarm-Firewall and tried again without success. Maybe sombody had the same problem. Big thanx for every help.
    I would be glad to get an error but absolutly nothing happens!

    Installing on Windows is pretty simple, unless there is something that prevents the java environment from starting the console. Check the path environment variable and make sure there are no other jdk mixed. Check that the windows security doesn't prevent the oui console from starting, it happens that the windows security blocks java applications, and if you asked it to do it by clicking accept, then it won't start.
    ~ Madrid
    http://hrivera99.blogspot.com/

  • Is this the category for iPad's iBook eBooks?

    No.   iBook under the notebook category refers to Apple's pre-MacBook consumer notebook series that was available from 1999-2005. For the ebook reader application used on iPads, please visit:
    https://discussions.apple.com/community/app_store/ibooks
    for user to user discussion.

    thing is, the release notes state that messing around with core settings in audio prefs can help but they add that different settings will be needed with different projects and i jus can't be bothered to start with all that considering how stable things have been 4 me in the last year or more
    maybe i have slightly over-reacted (after one stressful week) but comments like the above (from sliderson) are truly dull & limited. this board is full of peeps lamenting crashes with 9.1.3, big thanx to those like mike connelly who can offer something positive in the midst of general panic
    hopefully i'll change my mind as i continue to monitor the consensus of the community here, particularly around this issue of settings for numbers of cores. when peeps who know much more than me about the inner workings of macs tell me these settings really solve the issues i'll listen and take note

  • Pls advise PSU and CPU temp.

    At last i have decided to go for Herolchi HEC 525w Dual Fan Ball Bearing ATX Power Supply, after installing the New PSU my CPU Temperature go up by 3 degree...not sure whether all the RAIL will effect the temperature ?
    Pls take a look on my comparison : -
    Old PSU Young-Year 480W (Taiwan)
    Vcore    : 1.48 ~ 1.50
    + 3.3v   : 3.10 ~ 3.17
    +   5v    : 5.08 (no changes)
    +  12v   : 11.64 ~ 12.00
    System  : 35 ~ 38 degree
    CPU idle : 40 degree
    full load  : 57 degree (Prime95 & CPU burn-In)
    New HEC 525W (recommded my Intel and AMP)
    Vcore    : 1.47 ~ 1.50
    + 3.3v   : 3.30 ~ 3.36
    +   5v    : 4.97 ~ 5.0
    +  12v   : 11.76 ~ 11.88 (never hit to 12.00)
    System  : 36 ~ 39 degree
    CPU idle : 43 degree
    full load  : 60 degree (Prime 95 & CPU burn-in)
    Understand that all the variance for the above RAIL are within Spec +_ 5%
    Hi All, pls help to post all your RAIL lowest/highest for +3.3v, +5.0v and +12v..as well as system/CPU temperature, thanks....

    I would not worry about the extra 3 Deg. C that the CPU is now running at. 60C under full load is well withen normal specs. ..As for the new PSU, I am not familiar with that brand...If you could ,would you POST the AMPS on the RAILS, as that is more important than the Volts...You can find the AMP specs. on the side sticker of the PSU..ie..+12V=?A, +3.3V=?A, +5.0V=?A...THANX..Sean REILLY875

  • Need to make quiz with many functions on JAVA.

    I've to make quiz on JAVA, (Test japaneese)
    the goal is to write an answer of hieroglyph, answer can be The Number code of hieroglyph, or the AB code of hieroglyph
    On the first interface i have to:
    1) Write your name
    2) Choose test ( 1. By Number code, 2. By AB code)
    3) Choose order (1. Correct, 2. Random)
    4) Type the limit of hieroglyph: for example from 1 to 30, or from 550 - 600 (Cuz there're 1945 Hieroglyphs)
    On the second hieroglyph:
    1) Displays hieroglyph
    2) Displays status info: chosen parameters (for example Test: By number code; Order: Random; Hieroglyph 1 of 30; Elapsed time: 00:01:23)
    3) Input box where you have to type your answer
    4) Next button
    On the last interface will be displayed the percentage of the questions answered correctly - for example: 1) False: the correct is .... 2) True 3) False: the correct is .... etc; Points: 10 of 30
    I've some code: but i've to edit it to take what i need;
    Could any body help me what to do....i've only 2 weeks.
    I'm not genius in JAVA as some of you....so do not criticize me....as DB i've used an array...cuz i don't know how to connect JAVA to DB...
    As program code i've take analogue of my program already integrated in NetBeans 6.8 (Anagram Game) and little bit change it..
    Here's the code #1: (I've deleted many objects in arrays....cuz in every array 1945 objects, i mean hieroglyphs, number codes and AB codes)
    package com.toy.anagrams.lib;
    * List of the first test answers =)
    final class StaticWordLibrary extends WordLibrary {
        private static final String[] WORD_LIST = {
    "A","PABHA","ABGBQQQQ","BGBA","ABAA","SAQLABHAA","ABQ","QLPO","ABBPBPC","QQLSFFJA","PAARPO","PR","PBABPO","POAABQLA"
    * I've commented second List of the test answers =) test BY NUMBER CODE....cuz i don't know exactly yet how to connect it. I've added only prefix NUM (WORD_LIST_NUM)
    * private static final String[] WORD_LIST_NUM = {
    * "1","4/1/30","173","13/2/1","96","180","1/25","86","140/9/21","42/14/39","84/4/O","4/5","9/75","167","116/48","74","94","147"
    * List of the questions
        private static final String[] SCRAMBLED_WORD_LIST = {
       "一","右","雨","円","王","音","下","火","花","学","気","九","休","金","空","月","犬","見","五","口","校","左"
        final static WordLibrary DEFAULT = new StaticWordLibrary();
        private StaticWordLibrary() {
        public String getWord(int idx) {
            return WORD_LIST[idx];
        public String getScrambledWord(int idx) {
            return SCRAMBLED_WORD_LIST[idx];
        public int getSize() {
            return WORD_LIST.length;
        public boolean isCorrect(int idx, String userGuess) {
            return userGuess.equals(getWord(idx));
    }The 2nd code:
    package com.toy.anagrams.lib;
    * Interface defining logic
    public abstract class WordLibrary {
         * Constructor for subclasses.
        protected WordLibrary() {
        public static WordLibrary getDefault() {
            return StaticWordLibrary.DEFAULT;
        public abstract String getWord(int idx);
        public abstract String getScrambledWord(int idx);
        public abstract int getSize();
        public abstract boolean isCorrect(int idx, String userGuess);
    }P.S. If it's not possible to make in 2 weeks....can anybody suggest me where i can find almost such program where i can change data of questions; and no matter in what code it was programmed...
    BIG THANX TO ALL OF YOU!!! no matter could you help or not =) and sorry for my english =)

    georgemc wrote:
    What's JAVA?
    Fact: Java 1.2 can finish an infinite loop in as little as 2 minutes.

  • Help on Nvidia NIC

    Thanx to Supershanks and fafner for informing me how to get Nvidia NIC running again back in April.  Finally caught a min today and tryed your suggestions and got it back running again....BIG THANX!!!!  However, the Nividia Web based interface still does not work,,,,,just getting "Object not found----the requested URL was not found on this server"  Any tips on how to get this working as well???

    Glad we helped
    If using the international Nvidia drivers there may be install problems see Nforce Chipset Installation (non English) Windows XP Gives Users Group Error
    luck

  • Creative Cloud Desktop Client OSX 10.9.4 Problems !!!

    Hi Community
    Some days ago the Creative Cloud Client on OSX stopped running.
    The Problem:
    Creative Cloud Client starts but doesnt show content under apps etc.. only an running progress bar, or the Client starts but there is nothing at least as an blank window with CC Logo on top!
    System:
    2014 iMAC with i7, 32Gb Ram, OSX 10.9.4
    has anyone an idea how i can get the Client to work again because i need some new stuff from the cloud...
    big thanx for help
    art

    Artjungeone please try solution 2 in CC desktop lists applications as "Up to Date" when not installed - http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html to restore your Creative Cloud Desktop application.

  • Power issues all over: is this the end?

    Full historic on the laptop:
    - PB G4 15" 1.67 GHz bought in May 2005
    - logic board replaced under warranty
    - hard drive replaced under warranty last year
    - battery was part of the battery recall program
    - AC adapter died late last year, the thin wire finally came undone and I stopped using it as I started seeing sparks...
    I then bought a third-party replacement AC adapter. My replacement battery also started to show its age after more than 300 cycles. I was starting to have issues with me leaving my PB more than a day under sleep, I would have difficulty waking the computer up (had to remove the battery, reset the PRAM, etc...). Finally, a couple of weeks ago, that same occurrence happened again but this time, impossible to charge the battery back. Computer would start fine from AC, I would pop in the battery but it would stay at 0% even after a day being plugged in.
    I decided it was time to buy a new battery (NewerTech from OWC) and things were looking good last week. Everything was working fine and I was back at 3+ hours of battery life... Then yesterday, I left my PB open on my desk, plugged in. I came back a couple of hours later, impossible to wake it up. If I press the power, I get the chime, fans kick in and then nothing. Even removing the battery and resetting the PMU with the power button was not working. Only thing that worked was leaving the computer w/o battery and power for like 30 minutes and then starting again to power it up... At first I got a kernel panic (grey screen + noway sign) but after a couple more tries, I was able to start and everything seemed to work fine... But today, again, I'm unable to power on the PB...
    Any suggestions? Do I have to start looking at the 13" MBP? It stinks cause I was really hoping I could eek out enough from the PB to have a USB 3 laptop as my next one...

    thing is, the release notes state that messing around with core settings in audio prefs can help but they add that different settings will be needed with different projects and i jus can't be bothered to start with all that considering how stable things have been 4 me in the last year or more
    maybe i have slightly over-reacted (after one stressful week) but comments like the above (from sliderson) are truly dull & limited. this board is full of peeps lamenting crashes with 9.1.3, big thanx to those like mike connelly who can offer something positive in the midst of general panic
    hopefully i'll change my mind as i continue to monitor the consensus of the community here, particularly around this issue of settings for numbers of cores. when peeps who know much more than me about the inner workings of macs tell me these settings really solve the issues i'll listen and take note

  • Sending character array (as a bytebuffer)

    Hi,
    I do have to send a udp packet, containing several variables, and the reciever aspects it as a character array ... (C++, cannot change this part!)
    As far as I see it, I can only send ByteBuffers via DatagramPackets .
    Has anyone a clue how I can convert a ByteBuffer into another Bytebuffer in a way so that the udp reciever gets it as if I had sent a character array instead ?!?
    Or is there actually a character array udp sender ?!?
    Any help is highly appreciated, big Thanx in advance,
    ~Carmela

    sorry, wrong forum ... please disregard!

  • Sending character array (as a bytebuffer) via udp

    Hi,
    I do have to send a udp packet, containing several variables, and the reciever awaits it as a character array ... (C++, cannot change this part!)
    As far as I see it, I can only send ByteBuffers via DatagramPackets via udp.
    Has anyone a clue how I can convert a ByteBuffer into another Bytebuffer in a way so that the udp reciever gets it as if I had sent a character array instead ?!?
    Or is there actually a character array udp sender ?!?
    Any help is highly appreciated, big Thanx in advance,
    ~Carmela

    In C++, char' are unsigned bytes. Thus converting between bytes and chars is fairly straight forward. Java treats char as unsigned short (16-bit) so it converts chars to bytes as UTF-8. (By default) Unless you are using special on ascii characters i.e. 128+ all this makes no difference whatsoever.
    A bytebuffer is just a container for bytes. You can encode anything as bytes so there is no magic here. Just get the data as bytes and put it into a ByteBuffer.
    String string = "text";
    ByteBuffer bb = ByteBuffer.wrap(string.getBytes());

  • Performance Of Forms4.5 onWindows XP

    We have Oracle 8i installed on NT server and are accessing the same from various clients throught a main network server having Windows 2000. So far so good. Recentrly we had some new machines on client side having Windows XP - and we findthat it tkes atleast 5-10 minustes to load Forms runtime from the same. Anyone please help us out - we have absolutely no idea of how do we improve the performance
    A big thanx to all
    FD, India

    hmm... kk thx
    than i think i have a strange thin here =D
    I've got 3GB RAM but in the system preferences of XP it just shows me "1.99GB RAM" does win xp take about 1GB RAM? =S
    and "Intel(R) @ 2.66GHz 2.66GHz" <--- does that mean there are 2 dual core processorsr right? =S
    Message was edited by: Garelli

  • Satellite a20 s103 wifi problem

    Hi!
    I have inserted a MSI mp54g2 mini pci wifi card into my Toshiba Satellite a20 s103 computer and it doesn't work properly. The signal level is very low, though i have been testing it in the same room where was my AP (dlink dl-624+). I found, that there are 2 cables inside the computer (brown and white) and two slots on the wifi card (aux and main). I do not know how I should connect them, yet I have tried all the combinations and none of them changed the signal level. I found also, that even if the antena is not connected at all, the signal level is the same.
    Can anybody help me with this one??!!
    Please help me!!!
    THX :)

    Hi Horwath!!
    THX for a fast reply!
    I connected the cables as you advised, but I'm afraid it didn't change anything. The signal level maintains at very low level, though I'm in the same room where my AP is :(
    I have heard that some problems may occur, as my AP is from US and I have bought my computer in Poland, but I have tested the AP with a another notebook bought also in Poland and it worked fine!
    At least I know now how to connect the cables :) Guys from shop didn't have a clue how to do it :)
    So BIG THANX for that!!
    [Edited by: admin on 04-Mar-05 06:57]

  • J2ee.template ant build failed

    Hello,
    I am not sure why the following error that ant encountered while compiling with the init setting on java.class.path points to jboss-j2ee.jar file already. Believe the jboss-j2ee.jar file has the javax.jms.ConnectionFactory class included in the jar. Do I need other jar files?
    Thanks in advance.
    Alan
    compile:
    [javac] Compiling 1 source file to C:\user\product\JBoss\j2ee.template\ejb\build\class
    es
    [javac] C:\user\product\JBoss\j2ee.template\ejb\src\main\client\com\mpg\template\clien
    t\TestClient.java:88: cannot resolve symbol
    [javac] symbol : method createConnection ()
    [javac] location: interface javax.jms.ConnectionFactory
    [javac] lConnection = lFactory.createConnection();
    [javac] ^
    init:
    [echo] build.compiler = ${build.compiler}
    [echo] user.home = C:\Documents and Settings\alan
    [echo] java.home = c:\j2sdk1.4.2_03\jre
    [echo] ant.home = c:\ant\bin\..
    [echo] jboss.home = c:/user/product/jboss/jboss-3.2.3-src/build/output/jboss-3.2.3
    [echo] xdoclet.home = c:xdoclet
    [echo] junit.home = c:/junit3.8.1
    [echo] java.class.path = c:\ant\bin\..\lib\ant-launcher.jar;C:\user\product\JBoss\j2e
    e.template\.\;c:\j2sdk1.4.2_03\jre\lib\rt.jar;c:\user\product\jboss\jboss-3.2.3-src\build\
    output\jboss-3.2.3\server\default\lib\jboss-j2ee.jar;C:\ant\lib\ant-antlr.jar;C:\ant\lib\a
    nt-apache-bsf.jar;C:\ant\lib\ant-apache-resolver.jar;C:\ant\lib\ant-commons-logging.jar;C:
    \ant\lib\ant-commons-net.jar;C:\ant\lib\ant-icontract.jar;C:\ant\lib\ant-jai.jar;C:\ant\li
    b\ant-jakarta-bcel.jar;C:\ant\lib\ant-jakarta-log4j.jar;C:\ant\lib\ant-jakarta-oro.jar;C:\
    ant\lib\ant-jakarta-regexp.jar;C:\ant\lib\ant-javamail.jar;C:\ant\lib\ant-jdepend.jar;C:\a
    nt\lib\ant-jmf.jar;C:\ant\lib\ant-jsch.jar;C:\ant\lib\ant-junit.jar;C:\ant\lib\ant-launche
    r.jar;C:\ant\lib\ant-netrexx.jar;C:\ant\lib\ant-nodeps.jar;C:\ant\lib\ant-starteam.jar;C:\
    ant\lib\ant-stylebook.jar;C:\ant\lib\ant-swing.jar;C:\ant\lib\ant-trax.jar;C:\ant\lib\ant-
    vaj.jar;C:\ant\lib\ant-weblogic.jar;C:\ant\lib\ant-xalan1.jar;C:\ant\lib\ant-xalan2.jar;C:
    \ant\lib\ant-xslp.jar;C:\ant\lib\ant.jar;C:\ant\lib\xercesImpl.jar;C:\ant\lib\xml-apis.jar
    ;c:\j2sdk1.4.2_03\lib\tools.jar

    Hi,
    I've got the same problem, but with the JBOSS 3.0, here is the sample output:
    My settings are:
    init:
    [echo] build.compiler = ${build.compiler}
    [echo] user.home = C:\Documents and Settings\Marek
    [echo] java.home = c:\j2sdk\jre
    [echo] ant.home = c:\ant\bin\\..
    [echo] jboss.home = c:/jboss
    [echo] xdoclet.home = c:/xdoc
    [echo] junit.home = c:/junit
    [echo] java.class.path = c:\j2sdk\lib\tools.jar;c:\ant\bin\\..\lib\crimson.jar;c:\ant\bin\\..\lib\jaxp.jar;c:\ant\bin\\..\lib\ant.jar;;C:\xerces\xml-apis.jar;C:\xerces\xercesImpl.jar;C:\xerces\tools\xalan.jar;C:\xerces\xercesSamples.jar;C:\ant\lib;c:\junit;C:\jboss\lib;C:\jboss\client;C:\jboss\server\all\lib;C:\template\j2ee.template
    [echo]
    And at the end I get the message:
    compile:
    [javac] Compiling 1 source file to C:\template\j2ee.template\ejb\build\classes
    [javac] C:\template\j2ee.template\ejb\src\main\client\com\mpg\template\client\TestClient.java:88: cannot resolve symbol
    [javac] symbol : method createConnection ()
    [javac] location: interface javax.jms.ConnectionFactory
    [javac] lConnection = lFactory.createConnection();
    [javac] ^
    [javac] C:\template\j2ee.template\ejb\src\main\client\com\mpg\template\client\TestClient.java:90: cannot resolve symbol
    [javac] symbol : method createSession (boolean,int)
    [javac] location: interface javax.jms.Connection
    [javac] Session lJMSSession = lConnection.createSession( false, Session.AUTO_ACKNOWLEDGE );
    [javac] ^
    [javac] C:\template\j2ee.template\ejb\src\main\client\com\mpg\template\client\TestClient.java:95: cannot resolve symbol
    [javac] symbol : method createProducer (javax.jms.Queue)
    [javac] location: interface javax.jms.Session
    [javac] MessageProducer lProducer = lJMSSession.createProducer( lQueue );
    [javac] ^
    [javac] C:\template\j2ee.template\ejb\src\main\client\com\mpg\template\client\TestClient.java:98: cannot resolve symbol
    [javac] symbol : method send (javax.jms.TextMessage)
    [javac] location: interface javax.jms.MessageProducer
    [javac] lProducer.send( lMessage );
    [javac] ^
    [javac] C:\template\j2ee.template\ejb\src\main\client\com\mpg\template\client\TestClient.java:100: cannot resolve symbol
    [javac] symbol : method send (javax.jms.TextMessage)
    [javac] location: interface javax.jms.MessageProducer
    [javac] lProducer.send( lMessage );
    [javac] ^
    [javac] C:\template\j2ee.template\ejb\src\main\client\com\mpg\template\client\TestClient.java:102: cannot resolve symbol
    [javac] symbol : method send (javax.jms.TextMessage)
    [javac] location: interface javax.jms.MessageProducer
    [javac] lProducer.send( lMessage );
    [javac] ^
    [javac] 6 errors
    BUILD FAILED
    C:\template\j2ee.template\ejb\build.xml:213: Compile failed, messages should hav
    e been provided.
    Total time: 7 seconds
    Please tell me what is wrong???
    Big thanx for your help
    Rabenda

Maybe you are looking for