A Black Screen?
Okay, so I plugged my ipod mini in to charge/use itunes, etc... and i just unplugged it and looked at the screen and it's completely black. not blank, black... when i try to reset it, after holding the buttons for a few seconds, it goes back to black, and then jsut as the apple logo shows up it goes completely black again.
i sent my ipod in for service less than a month ago and now i'm having issues again. this is ridiculous.
omg, my ipod is doing the same thing, and that is exactly what i said, about the black, not blank thing. i put it into disk mode and the screen is working just fine, but when i reset it to get out it went back to black. and when i plug it into my computer it works just fine. i didnt do anything to it between the last time it worked and now either.
had your ipod had any other problems recently? because mine was been messing up a lot.
also, when the screen is black and you press the click wheel does it make a clicking sound thru the headphones?
if u figure it out please help!
Windows XP
Similar Messages
-
HAVE NEW 13.3 MAC AIR (previously, still have 13.3 MCbook pro which works captures what I am looking for an answer to)
when i open sites in safari the page opens fine if it is not a pdf based page.
Once i open a site that has a link to another page that is a pdf based page the page comes up as a black screen with no info showing
If I open a site that gices me an open to save a file to a word, excel type document or a pdf , everything works fine until I try to save the information to a PDF and again the screen goes black
I have tried the safari help site but to no avail, does anyone have a solution to thid problem. (I do have the abode ofr mac program loaded)If you delete all the Adobe Reader stuff it will probably fix this. For almost everything, the Apple pdf handling works better.
-
Start-up problems, black screen or open firmware
My iBook G4 1.33GHz Dual USB, with 1 gb RAM memory has been troublesome lately. It's installed with the latest version of OS 10.4.9
When starting up the ibook, it will sometimes only show a black screen after the boot chime. Repeated force restart sometimes makes it boot up the open firmware (white screen).
Then I see the error message:
"Illegal instructions at: %SRR0:ff85e778 %SRR1:00081000"
When I continue on with "mac-boot", I get the blue screen with a question marked box. So it can't find the startup disk.
This usually only happens when I'm done working for the day and close the lid on my ibook without manually clicking on the sleep mode when I put in in my drawer,. I've seen several times that the screen is still on when I close the lid, so it will continue to burn battery time.
I've managed to get the ibook to boot properly after removing the battery and letting it "cool-down" for 15-20 min. Also, zapping pram, vram sometimes works, but I don't know how much that actually helped. It worked once when I typed in the reset-nvram in the open firmware screen too.
I'd rather not have this happen at all! Any suggestions? Is this the much-talked about RAM memory failure?
Any suggestions would be very appreciated.
Message was edited by: antony chenHI,
*"I get the blue screen with a question marked box."*
That can mean several things. One, the drive is failing. Two, your iBook can't find a System Folder to boot from. Try booting while holding down the Option key which will prompt the Startup Manager window.
MemTest
Boot from your install disk and check the hard disk for errors.
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger and later) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your start up disk and click Restart
While you have the Disk Utility window open, look at the bottom of the window where you see Capacity and Available. Make sure there is always 15% free disk space. Not enough disk space can cause directory corruption.
If you cannot boot from your install disk, try booting in Safe Mode
A flashing question mark appears when you start your Mac
Carolyn -
My iMac 8.1 (10.6.8 ) was slowing down and had recurrent permissions problems, mostly with Java. I backed everything up, and then re-installed from time machine. Now all I get is a black screen which says I need to reboot. Power+D gives me a hardware error message: 4 MOT/1/40000003: HDD-1336 or HDD-1327. When I reboot from the OSX CD and start disc utilities everything checks out OK. When I reload 10.5.2 from the OSX CD everything seems to work OK and no more permissions problems. But then I loose all my email and safari stuff. Anyone have any ideas short of going back to my old PC?
DonM. wrote:
Hi
Thanks for the help. No point in fooling around with it any more. Will I be able to use it as a monitor if I get a mimi mac?
Cheers. Don
No unfortunatley it's too old, you are referring to Target Display Mode which became avialble in 2009, your 2008 needs to have the HD replaced. I'd still do that if everything else is OK or you can simply buy a new MM and display or even a new iMac or an Apple refurbished iMac to save money. -
A movie I bought a while ago will no longer play, instead it just shows a black screen and no audio. All of the other movies in my library play fine. Any ideas as to whats going on or how to fix it? Thanks for any help.
Hi 22chill,
I recommend that we delete and re-download the movie from your purchase history:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/HT2519
Thanks,
Matt M. -
as of today when i plug my 7th generation ipod that i just got for christmas 2012 my pc shuts down to a blue screen with alot of writing then to black screen with alot of writing then to an all black screen then and windows error message my computer is ingood condition no malicious malware and has been clean i need help
thank ycjlet me get back with the answer with what the messages say on the blue screen and the black screen if i can read them fast enough before it shuts down i have windows 7 professional
-
[solved]black screen with xorg 1.6 after resume (intel)
after upgrading to xorg-server 1.6 no matter if i use s2ram or s2disk, first resume works fine, the second suspend and resume results in a black screen without any chance to swich to any tty.
i have read about bug like this which was resolved with using intel legacy driver. however my problem still occures.
maybe there is some module i should load/unload/reload on hibernate/wake-up?
here is my xorg.conf, lspci, Xorg.0.log.old (the one i had to kill with black screen) and Xorg.0.log
xorg.conf
Section "ServerFlags"
Option "AutoAddDevices" "False"
Option "DontZap" "false"
EndSection
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Cursor" "SendCoreEvents"
InputDevice "Stylus" "SendCoreEvents"
InputDevice "Eraser" "SendCoreEvents"
EndSection
Section "InputDevice"
Identifier "Cursor"
Driver "wacom"
Option "Device" "/dev/ttyS0"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"
Option "KeepShape" "on"
Option "Mode" "Absolute"
Option "BottomY" "18432"
Option "BottomX" "24576"
EndSection
Section "InputDevice"
Identifier "Stylus"
Driver "wacom"
Option "Device" "/dev/ttyS0"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"
Option "KeepShape" "on"
Option "TPCButton" "off"
Option "BottomY" "18432"
Option "BottomX" "24576"
Option "Mode" "Absolute"
EndSection
Section "InputDevice"
Identifier "Eraser"
Driver "wacom"
Option "Device" "/dev/ttyS0"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"
Option "KeepShape" "on"
Option "BottomY" "18432"
Option "BottomX" "24576"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/local"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "extmod"
Load "xtrap"
Load "dbe"
Load "dri"
Load "glx"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbRules" "base"
Option "XkbModel" "pc105"
Option "XkbLayout" "de, ru"
Option "XkbVariant" "nodeadkeys, winkeys"
Option "XkbOptions" "grp:caps_toggle"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile 915GM/GMS/910GML Express Graphics Controller"
BusID "PCI:0:2:0"
Option "FramebufferCompression" "on"
Option "AccelMethod" "EXA"
Option "Tiling" "on"
Option "TrippleBuffer" "true"
Option "MigrationHeuristic" "greedy"
Option "RenderAccel" "true"
Option "ExaNoComposite" "false"
Option "EnablePageFlip" "true"
Option "DRI" "on"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "dri"
Mode 0666
EndSection
lspci
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3)
00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751M Gigabit Ethernet PCI Express (rev 11)
04:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 8d)
04:00.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 13)
04:02.0 Ethernet controller: Atheros Communications Inc. AR5212 802.11abg NIC (rev 01)
Xorg.0.log
X.Org X Server 1.6.0
Release Date: 2009-2-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-ARCH i686
Current Operating System: Linux thinky 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009 i686
Build Date: 10 April 2009 07:03:14PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 14 19:27:54 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Cursor"
(**) |-->Input Device "Stylus"
(**) |-->Input Device "Eraser"
(**) Option "DontZap" "false"
(**) Option "AutoAddDevices" "False"
(**) Not automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/local,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(II) Loader magic: 0x1a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@0:2:0) Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 3, Mem @ 0xa0080000/524288, 0xc0000000/268435456, 0xa0000000/262144, I/O @ 0x00001800/8
(--) PCI: (0@0:2:1) Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 3, Mem @ 0x68000000/524288
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded by default.
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "xtrap"
(WW) Warning, couldn't open module xtrap
(II) UnloadModule: "xtrap"
(EE) Failed to load module "xtrap" (module does not exist, 0)
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "freetype"
(WW) Warning, couldn't open module freetype
(II) UnloadModule: "freetype"
(EE) Failed to load module "freetype" (module does not exist, 0)
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.3.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.4.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "wacom"
(II) Loading /usr/lib/xorg/modules/input//wacom_drv.so
(II) Module wacom: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) Wacom driver level: 47-0.8.3-2 $
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33, Intel Integrated Graphics Device
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(**) intel(0): Option "AccelMethod" "EXA"
(**) intel(0): Option "DRI" "on"
(**) intel(0): Option "FramebufferCompression" "on"
(**) intel(0): Option "Tiling" "on"
(II) intel(0): Integrated Graphics Chipset: Intel(R) 915GM
(--) intel(0): Chipset: "915GM"
(--) intel(0): Linear framebuffer at 0xC0000000
(--) intel(0): IO registers at addr 0xA0080000
(II) intel(0): 2 display pipes available.
(**) intel(0): Using EXA for acceleration
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Monitor0
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) intel(0): initializing int10
(II) intel(0): Bad V_BIOS checksum
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 7872 kB
(II) intel(0): VESA VBE OEM: Intel(r)915GM/910ML/915MS Graphics Chip Accelerated VGA BIOS
(II) intel(0): VESA VBE OEM Software Rev: 1.0
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(r)915GM/910ML/915MS Graphics Controller
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(0): No SDVO device found on SDVOB
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): Output TV has no monitor section
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Output TV disconnected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS using initial mode 1024x768
(II) intel(0): Monitoring connected displays enabled
(II) intel(0): detected 256 kB GTT.
(II) intel(0): detected 7932 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Intel XvMC decoder disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.4.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x00000000 to 0x00000203
(WW) intel(0): PIPEASTAT before: status:
(WW) intel(0): PIPEASTAT after: status: VSYNC_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS
(II) Loading sub module "dri"
(II) LoadModule: "dri"
(II) Reloading /usr/lib/xorg/modules/extensions//libdri.so
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 363776 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 1455100 kB available
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): [drm] Registers = 0xa0080000
(II) intel(0): [drm] ring buffer = 0xc0000000
(II) intel(0): [drm] mapped front buffer at 0xc0800000, handle = 0xc0800000
(II) intel(0): [drm] mapped back buffer at 0xc1800000, handle = 0xc1800000
(II) intel(0): [drm] mapped depth buffer at 0xc1c00000, handle = 0xc1c00000
(II) intel(0): [drm] mapped classic textures at 0xc2000000, handle = 0xc2000000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): Page Flipping disabled
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(**) intel(0): Option "MigrationHeuristic" "greedy"
(**) intel(0): Option "EXANoComposite" "false"
(II) EXA(0): Offscreen pixmap area of 12582912 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x00800000 (pgoffset 2048)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x00c00000 (pgoffset 3072)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x01800000 (pgoffset 6144)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x01c00000 (pgoffset 7168)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x02000000 (pgoffset 8192)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x0061ffff: compressed frame buffer (6144 kB, 0x000000005f820000 physical
(II) intel(0): 0x00620000-0x00620fff: compressed ll buffer (4 kB, 0x000000005fe20000 physical
(II) intel(0): 0x00621000-0x0062afff: HW cursors (40 kB, 0x000000005fe21000 physical
(II) intel(0): 0x0062b000-0x00632fff: logical 3D context (32 kB)
(II) intel(0): 0x00633000-0x00633fff: overlay registers (4 kB, 0x000000005fe33000 physical
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x00800000-0x00bfffff: front buffer (4096 kB) X tiled
(II) intel(0): 0x00c00000-0x017fffff: exa offscreen (12288 kB)
(II) intel(0): 0x01800000-0x01bfffff: back buffer (4096 kB) X tiled
(II) intel(0): 0x01c00000-0x01ffffff: depth buffer (4096 kB) X tiled
(II) intel(0): 0x02000000-0x03ffffff: classic textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane A is now disabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): Output TV is connected to pipe none
(II) intel(0): [drm] dma control initialized, using IRQ 16
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): DPMS enabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: Enabled
(WW) intel(0): Option "TrippleBuffer" is not used
(WW) intel(0): Option "RenderAccel" is not used
(WW) intel(0): Option "EnablePageFlip" is not used
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 270 x 203
(**) Option "Protocol" "auto"
(**) Option "Device" "/dev/input/mice"
(II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
(**) Mouse0: Device: "/dev/input/mice"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Option "Device" "/dev/input/mice"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse0: Buttons: 11
(**) Mouse0: Sensitivity: 1
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(**) Mouse0: (accel) keeping acceleration scheme 1
(**) Mouse0: (accel) filter chain progression: 2.00
(**) Mouse0: (accel) filter stage 0: 20.00 ms
(**) Mouse0: (accel) set acceleration profile 0
(II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "base"
(**) Keyboard0: XkbRules: "base"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "de, ru"
(**) Keyboard0: XkbLayout: "de, ru"
(**) Option "XkbVariant" "nodeadkeys, winkeys"
(**) Keyboard0: XkbVariant: "nodeadkeys, winkeys"
(**) Option "XkbOptions" "grp:caps_toggle"
(**) Keyboard0: XkbOptions: "grp:caps_toggle"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(**) Option "SendCoreEvents"
(**) Cursor: always reports core events
(**) Cursor device is /dev/ttyS0
(**) Cursor is in absolute mode
(**) Cursor: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "KeepShape" "on"
(**) Cursor: keeps shape
(**) Option "BottomX" "24576"
(**) Cursor: bottom x = 24576
(**) Option "BottomY" "18432"
(**) Cursor: bottom y = 18432
(**) Option "BaudRate" "9600"
(**) Cursor: serial speed 9600
(II) XINPUT: Adding extended input device "Cursor" (type: Wacom Cursor)
(**) Option "Device" "/dev/ttyS0"
(**) Option "StopBits" "1"
(**) Option "DataBits" "8"
(**) Option "Parity" "None"
(**) Option "Vmin" "1"
(**) Option "Vtime" "10"
(**) Option "FlowControl" "Xoff"
usbDetect: can not ioctl version
(==) Wacom using pressure threshold of 15 for button 1
(==) Wacom General ISDV4 tablet speed=9600 (19200) maxX=24576 maxY=18432 maxZ=255 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Cursor" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
(**) Option "SendCoreEvents"
(**) Stylus: always reports core events
(**) Stylus device is /dev/ttyS0
(**) Stylus is in absolute mode
(**) Stylus: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "KeepShape" "on"
(**) Stylus: keeps shape
(**) Option "BottomX" "24576"
(**) Stylus: bottom x = 24576
(**) Option "BottomY" "18432"
(**) Stylus: bottom y = 18432
(**) Stylus: threshold = 15
(**) Stylus: max x set to 24576 by xorg.conf
(**) Stylus: max y set to 18432 by xorg.conf
(**) Stylus: max z = 255
(**) Option "TPCButton" "off"
(**) Option "BaudRate" "9600"
(**) Stylus: serial speed 9600
(II) XINPUT: Adding extended input device "Stylus" (type: Wacom Stylus)
(==) Wacom device "Stylus" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
(**) Option "SendCoreEvents"
(**) Eraser: always reports core events
(**) Eraser device is /dev/ttyS0
(**) Eraser is in absolute mode
(**) Eraser: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "KeepShape" "on"
(**) Eraser: keeps shape
(**) Option "BottomX" "24576"
(**) Eraser: bottom x = 24576
(**) Option "BottomY" "18432"
(**) Eraser: bottom y = 18432
(**) Eraser: threshold = 15
(**) Eraser: max x set to 24576 by xorg.conf
(**) Eraser: max y set to 18432 by xorg.conf
(**) Eraser: max z = 255
(**) Option "BaudRate" "9600"
(**) Eraser: serial speed 9600
(II) XINPUT: Adding extended input device "Eraser" (type: Wacom Eraser)
(==) Wacom device "Eraser" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
(II) config/hal: Adding input device ThinkPad Extra Buttons
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device Wacom Serial Tablet PC Pen Tablet/Digitizer
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device Macintosh mouse button emulation
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device TPPS/2 IBM TrackPoint
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device Video Bus
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) intel(0): xf86BindGARTMemory: bind key 5 at 0x04000000 (pgoffset 16384)
(II) intel(0): xf86UnbindGARTMemory: unbind key 5
(II) intel(0): xf86BindGARTMemory: bind key 5 at 0x04000000 (pgoffset 16384)
(II) intel(0): xf86UnbindGARTMemory: unbind key 5
(II) intel(0): xf86BindGARTMemory: bind key 5 at 0x04000000 (pgoffset 16384)
(II) intel(0): xf86UnbindGARTMemory: unbind key 5
Xorg.0.log.old
X.Org X Server 1.6.0
Release Date: 2009-2-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-ARCH i686
Current Operating System: Linux thinky 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009 i686
Build Date: 10 April 2009 07:03:14PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 14 19:27:40 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Cursor"
(**) |-->Input Device "Stylus"
(**) |-->Input Device "Eraser"
(**) Option "DontZap" "false"
(**) Option "AutoAddDevices" "False"
(**) Not automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/local,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(II) Loader magic: 0x1a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@0:2:0) Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 3, Mem @ 0xa0080000/524288, 0xc0000000/268435456, 0xa0000000/262144, I/O @ 0x00001800/8
(--) PCI: (0@0:2:1) Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 3, Mem @ 0x68000000/524288
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded by default.
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "xtrap"
(WW) Warning, couldn't open module xtrap
(II) UnloadModule: "xtrap"
(EE) Failed to load module "xtrap" (module does not exist, 0)
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "freetype"
(WW) Warning, couldn't open module freetype
(II) UnloadModule: "freetype"
(EE) Failed to load module "freetype" (module does not exist, 0)
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.3.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.4.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "wacom"
(II) Loading /usr/lib/xorg/modules/input//wacom_drv.so
(II) Module wacom: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) Wacom driver level: 47-0.8.3-2 $
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33, Intel Integrated Graphics Device
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(**) intel(0): Option "AccelMethod" "EXA"
(**) intel(0): Option "DRI" "on"
(**) intel(0): Option "FramebufferCompression" "on"
(**) intel(0): Option "Tiling" "on"
(II) intel(0): Integrated Graphics Chipset: Intel(R) 915GM
(--) intel(0): Chipset: "915GM"
(--) intel(0): Linear framebuffer at 0xC0000000
(--) intel(0): IO registers at addr 0xA0080000
(II) intel(0): 2 display pipes available.
(**) intel(0): Using EXA for acceleration
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Monitor0
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) intel(0): initializing int10
(II) intel(0): Bad V_BIOS checksum
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 7872 kB
(II) intel(0): VESA VBE OEM: Intel(r)915GM/910ML/915MS Graphics Chip Accelerated VGA BIOS
(II) intel(0): VESA VBE OEM Software Rev: 1.0
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(r)915GM/910ML/915MS Graphics Controller
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(0): No SDVO device found on SDVOB
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): Output TV has no monitor section
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Output TV disconnected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS using initial mode 1024x768
(II) intel(0): Monitoring connected displays enabled
(II) intel(0): detected 256 kB GTT.
(II) intel(0): detected 7932 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Intel XvMC decoder disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.4.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x68000 (TV_CTL) changed from 0x10000000 to 0x000c0c00
(WW) intel(0): Register 0x68010 (TV_CSC_Y) changed from 0x00000000 to 0x0332012d
(WW) intel(0): Register 0x68014 (TV_CSC_Y2) changed from 0x00000000 to 0x07d30104
(WW) intel(0): Register 0x68018 (TV_CSC_U) changed from 0x00000000 to 0x0733052d
(WW) intel(0): Register 0x6801c (TV_CSC_U2) changed from 0x00000000 to 0x05c70200
(WW) intel(0): Register 0x68020 (TV_CSC_V) changed from 0x00000000 to 0x0340030c
(WW) intel(0): Register 0x68024 (TV_CSC_V2) changed from 0x00000000 to 0x06d00200
(WW) intel(0): Register 0x68028 (TV_CLR_KNOBS) changed from 0x00000000 to 0x00606000
(WW) intel(0): Register 0x6802c (TV_CLR_LEVEL) changed from 0x00000000 to 0x010b00e1
(WW) intel(0): Register 0x68030 (TV_H_CTL_1) changed from 0x00000000 to 0x00400359
(WW) intel(0): Register 0x68034 (TV_H_CTL_2) changed from 0x00000000 to 0x80480022
(WW) intel(0): Register 0x68038 (TV_H_CTL_3) changed from 0x00000000 to 0x007c0344
(WW) intel(0): Register 0x6803c (TV_V_CTL_1) changed from 0x00000000 to 0x00f01415
(WW) intel(0): Register 0x68040 (TV_V_CTL_2) changed from 0x00000000 to 0x00060607
(WW) intel(0): Register 0x68044 (TV_V_CTL_3) changed from 0x00000000 to 0x80120001
(WW) intel(0): Register 0x68048 (TV_V_CTL_4) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x6804c (TV_V_CTL_5) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68050 (TV_V_CTL_6) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x68054 (TV_V_CTL_7) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68060 (TV_SC_CTL_1) changed from 0x00000000 to 0xc1710088
(WW) intel(0): Register 0x68064 (TV_SC_CTL_2) changed from 0x00000000 to 0x4e2d1dc8
(WW) intel(0): Register 0x68070 (TV_WIN_POS) changed from 0x00000000 to 0x00360024
(WW) intel(0): Register 0x68074 (TV_WIN_SIZE) changed from 0x00000000 to 0x02640198
(WW) intel(0): Register 0x68080 (TV_FILTER_CTL_1) changed from 0x00000000 to 0x800010bb
(WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x00000000 to 0x00028283
(WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x00000000 to 0x00014141
(WW) intel(0): Register 0x68100 (TV_H_LUMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x681ec (TV_H_LUMA_59) changed from 0x00000000 to 0x0000b060
(WW) intel(0): Register 0x68200 (TV_H_CHROMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x682ec (TV_H_CHROMA_59) changed from 0x00000000 to 0x0000b060
(II) Loading sub module "dri"
(II) LoadModule: "dri"
(II) Reloading /usr/lib/xorg/modules/extensions//libdri.so
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 363776 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 1455100 kB available
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] loaded kernel module for "i915" driver.
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): [drm] Registers = 0xa0080000
(II) intel(0): [drm] ring buffer = 0xc0000000
(II) intel(0): [drm] mapped front buffer at 0xc0800000, handle = 0xc0800000
(II) intel(0): [drm] mapped back buffer at 0xc1800000, handle = 0xc1800000
(II) intel(0): [drm] mapped depth buffer at 0xc1c00000, handle = 0xc1c00000
(II) intel(0): [drm] mapped classic textures at 0xc2000000, handle = 0xc2000000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): Page Flipping disabled
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(**) intel(0): Option "MigrationHeuristic" "greedy"
(**) intel(0): Option "EXANoComposite" "false"
(II) EXA(0): Offscreen pixmap area of 12582912 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x00800000 (pgoffset 2048)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x00c00000 (pgoffset 3072)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x01800000 (pgoffset 6144)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x01c00000 (pgoffset 7168)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x02000000 (pgoffset 8192)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x0061ffff: compressed frame buffer (6144 kB, 0x000000005f820000 physical
(II) intel(0): 0x00620000-0x00620fff: compressed ll buffer (4 kB, 0x000000005fe20000 physical
(II) intel(0): 0x00621000-0x0062afff: HW cursors (40 kB, 0x000000005fe21000 physical
(II) intel(0): 0x0062b000-0x00632fff: logical 3D context (32 kB)
(II) intel(0): 0x00633000-0x00633fff: overlay registers (4 kB, 0x000000005fe33000 physical
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x00800000-0x00bfffff: front buffer (4096 kB) X tiled
(II) intel(0): 0x00c00000-0x017fffff: exa offscreen (12288 kB)
(II) intel(0): 0x01800000-0x01bfffff: back buffer (4096 kB) X tiled
(II) intel(0): 0x01c00000-0x01ffffff: depth buffer (4096 kB) X tiled
(II) intel(0): 0x02000000-0x03ffffff: classic textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane A is now disabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): Output TV is connected to pipe none
(II) intel(0): [drm] dma control initialized, using IRQ 16
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): DPMS enabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: Enabled
(WW) intel(0): Option "TrippleBuffer" is not used
(WW) intel(0): Option "RenderAccel" is not used
(WW) intel(0): Option "EnablePageFlip" is not used
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 270 x 203
(**) Option "Protocol" "auto"
(**) Option "Device" "/dev/input/mice"
(II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
(**) Mouse0: Device: "/dev/input/mice"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Option "Device" "/dev/input/mice"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse0: Buttons: 11
(**) Mouse0: Sensitivity: 1
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(**) Mouse0: (accel) keeping acceleration scheme 1
(**) Mouse0: (accel) filter chain progression: 2.00
(**) Mouse0: (accel) filter stage 0: 20.00 ms
(**) Mouse0: (accel) set acceleration profile 0
(II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "base"
(**) Keyboard0: XkbRules: "base"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "de, ru"
(**) Keyboard0: XkbLayout: "de, ru"
(**) Option "XkbVariant" "nodeadkeys, winkeys"
(**) Keyboard0: XkbVariant: "nodeadkeys, winkeys"
(**) Option "XkbOptions" "grp:caps_toggle"
(**) Keyboard0: XkbOptions: "grp:caps_toggle"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(**) Option "SendCoreEvents"
(**) Cursor: always reports core events
(**) Cursor device is /dev/ttyS0
(**) Cursor is in absolute mode
(**) Cursor: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "KeepShape" "on"
(**) Cursor: keeps shape
(**) Option "BottomX" "24576"
(**) Cursor: bottom x = 24576
(**) Option "BottomY" "18432"
(**) Cursor: bottom y = 18432
(**) Option "BaudRate" "9600"
(**) Cursor: serial speed 9600
(II) XINPUT: Adding extended input device "Cursor" (type: Wacom Cursor)
(**) Option "Device" "/dev/ttyS0"
(**) Option "StopBits" "1"
(**) Option "DataBits" "8"
(**) Option "Parity" "None"
(**) Option "Vmin" "1"
(**) Option "Vtime" "10"
(**) Option "FlowControl" "Xoff"
usbDetect: can not ioctl version
(==) Wacom using pressure threshold of 15 for button 1
(==) Wacom General ISDV4 tablet speed=9600 (19200) maxX=24576 maxY=18432 maxZ=255 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Cursor" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
(**) Option "SendCoreEvents"
(**) Stylus: always reports core events
(**) Stylus device is /dev/ttyS0
(**) Stylus is in absolute mode
(**) Stylus: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "KeepShape" "on"
(**) Stylus: keeps shape
(**) Option "BottomX" "24576"
(**) Stylus: bottom x = 24576
(**) Option "BottomY" "18432"
(**) Stylus: bottom y = 18432
(**) Stylus: threshold = 15
(**) Stylus: max x set to 24576 by xorg.conf
(**) Stylus: max y set to 18432 by xorg.conf
(**) Stylus: max z = 255
(**) Option "TPCButton" "off"
(**) Option "BaudRate" "9600"
(**) Stylus: serial speed 9600
(II) XINPUT: Adding extended input device "Stylus" (type: Wacom Stylus)
(==) Wacom device "Stylus" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
(**) Option "SendCoreEvents"
(**) Eraser: always reports core events
(**) Eraser device is /dev/ttyS0
(**) Eraser is in absolute mode
(**) Eraser: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "KeepShape" "on"
(**) Eraser: keeps shape
(**) Option "BottomX" "24576"
(**) Eraser: bottom x = 24576
(**) Option "BottomY" "18432"
(**) Eraser: bottom y = 18432
(**) Eraser: threshold = 15
(**) Eraser: max x set to 24576 by xorg.conf
(**) Eraser: max y set to 18432 by xorg.conf
(**) Eraser: max z = 255
(**) Option "BaudRate" "9600"
(**) Eraser: serial speed 9600
(II) XINPUT: Adding extended input device "Eraser" (type: Wacom Eraser)
(==) Wacom device "Eraser" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
(II) UnloadModule: "mouse"
(II) UnloadModule: "kbd"
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) intel(0): xf86UnbindGARTMemory: unbind key 1
(II) intel(0): xf86UnbindGARTMemory: unbind key 2
(II) intel(0): xf86UnbindGARTMemory: unbind key 3
(II) intel(0): xf86UnbindGARTMemory: unbind key 4
(II) intel(0): [drm] removed 1 reserved context for kernel
(II) intel(0): [drm] unmapping 8192 bytes of SAREA 0xf8079000 at 0xb78f7000
(II) intel(0): [drm] Closed DRM master.
anyone clue?
Last edited by lynucs (2009-05-09 18:38:01)took a look into everything.log.
that line looks pretty suspicious:
kernel: [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
it occures around the time i did the last resume.
here is a relevant snippet from everything.log:
Apr 14 18:35:57 thinky kernel: [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
Apr 14 18:35:58 thinky kernel: [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
Apr 14 18:36:00 thinky acpid: client connected from 9040[0:0]
Apr 14 18:36:00 thinky acpid: 1 client rule loaded
Apr 14 18:38:04 thinky ntpd[6265]: adjusting local clock by -87.862975s
Apr 14 18:42:04 thinky ntpd[6265]: adjusting local clock by -87.769493s
Apr 14 18:42:55 thinky acpid: client 6223[0:0] has disconnected
Apr 14 18:42:55 thinky logger: ACPI group/action undefined: ibm/hotkey / HKEY
Apr 14 18:42:57 thinky kernel: [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
Apr 14 18:43:07 thinky kernel: PM: Syncing filesystems ... done.
Apr 14 18:43:07 thinky kernel: Freezing user space processes ... (elapsed 0.01 seconds) done.
Apr 14 18:43:07 thinky kernel: Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
Apr 14 18:43:07 thinky kernel: Suspending console(s) (use no_console_suspend to debug)
Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: PCI INT A disabled
Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: power state changed by ACPI to D3
Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Synchronizing SCSI cache
Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Stopping disk
Apr 14 18:43:07 thinky kernel: serial 00:09: disabled
Apr 14 18:43:07 thinky kernel: ath5k 0000:04:02.0: PCI INT A disabled
Apr 14 18:43:07 thinky kernel: ACPI handle has no context!
Apr 14 18:43:07 thinky kernel: sdhci-pci 0000:04:00.1: PME# disabled
Apr 14 18:43:07 thinky kernel: sdhci-pci 0000:04:00.1: PCI INT B disabled
Apr 14 18:43:07 thinky kernel: ACPI handle has no context!
Apr 14 18:43:07 thinky kernel: tg3 0000:02:00.0: PME# enabled
Apr 14 18:43:07 thinky kernel: Intel ICH 0000:00:1e.2: PCI INT A disabled
Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: PCI INT D disabled
Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: PME# disabled
Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.3: PCI INT D disabled
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.2: PCI INT C disabled
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: PCI INT B disabled
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: PCI INT A disabled
Apr 14 18:43:07 thinky kernel: ACPI: Preparing to enter system sleep state S3
Apr 14 18:43:07 thinky kernel: Disabling non-boot CPUs ...
Apr 14 18:43:07 thinky kernel: Extended CMOS year: 2000
Apr 14 18:43:07 thinky kernel: Intel machine check architecture supported.
Apr 14 18:43:07 thinky kernel: Intel machine check reporting enabled on CPU#0.
Apr 14 18:43:07 thinky kernel: Back to C!
Apr 14 18:43:07 thinky kernel: Extended CMOS year: 2000
Apr 14 18:43:07 thinky kernel: Force enabled HPET at resume
Apr 14 18:43:07 thinky kernel: ------------[ cut here ]------------
Apr 14 18:43:07 thinky kernel: WARNING: at kernel/hrtimer.c:625 hres_timers_resume+0x41/0x50()
Apr 14 18:43:07 thinky kernel: Hardware name: 1866WBA
Apr 14 18:43:07 thinky kernel: hres_timers_resume() called with IRQs enabled!Modules linked in: ipv6 aes_i586 aes_generic i915 drm i2c_algo_bit ext2 pcmcia psmouse thinkpad_acpi rfkill nvram i2c_i801 serio_raw iTCO_wdt iTCO_vendor_support i2c_core sg yenta_socket rsrc_nonstatic sdhci_pci sdhci pcmcia_core mmc_core video output uhci_hcd ehci_hcd usbcore intel_agp agpgart evdev thermal fan button battery ac fuse snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_intel8x0 snd_ac97_codec snd_pcm_oss snd_pcm snd_timer snd_page_alloc snd_mixer_oss snd soundcore ac97_bus ath_pci wlan ath_hal(P) arc4 ecb ath5k mac80211 led_class cfg80211 tg3 libphy cpufreq_powersave cpufreq_ondemand cpufreq_conservative acpi_cpufreq freq_table processor rtc_cmos rtc_core rtc_lib ext3 jbd mbcache sd_mod ata_piix ahci ata_generic pata_acpi libata scsi_mod
Apr 14 18:43:07 thinky kernel: Pid: 9512, comm: s2ram Tainted: P 2.6.29-ARCH #1
Apr 14 18:43:07 thinky kernel: Call Trace:
Apr 14 18:43:07 thinky kernel: [<c012f9d7>] warn_slowpath+0x87/0xe0
Apr 14 18:43:07 thinky kernel: [<c011ec25>] default_spin_lock_flags+0x5/0x10
Apr 14 18:43:07 thinky kernel: [<c01164d0>] lapic_next_event+0x10/0x20
Apr 14 18:43:07 thinky kernel: [<c01500e3>] clockevents_program_event+0xa3/0x170
Apr 14 18:43:07 thinky kernel: [<c0151312>] tick_dev_program_event+0x32/0xb0
Apr 14 18:43:07 thinky kernel: [<c0150447>] tick_notify+0x97/0x3c0
Apr 14 18:43:07 thinky kernel: [<c01491a6>] notifier_call_chain+0x36/0x70
Apr 14 18:43:07 thinky kernel: [<c0147ea1>] hres_timers_resume+0x41/0x50
Apr 14 18:43:07 thinky kernel: [<c014cc3a>] timekeeping_resume+0x11a/0x140
Apr 14 18:43:07 thinky kernel: [<c0299d91>] __sysdev_resume+0x11/0x50
Apr 14 18:43:07 thinky kernel: [<c0299e0f>] sysdev_resume+0x3f/0x70
Apr 14 18:43:07 thinky kernel: [<c015b410>] suspend_devices_and_enter+0x160/0x190
Apr 14 18:43:07 thinky kernel: [<c015bb7f>] freeze_processes+0x4f/0xa0
Apr 14 18:43:07 thinky kernel: [<c015b58a>] enter_state+0xfa/0x150
Apr 14 18:43:07 thinky kernel: [<c015b674>] state_store+0x94/0xd0
Apr 14 18:43:07 thinky kernel: [<c015b5e0>] state_store+0x0/0xd0
Apr 14 18:43:07 thinky kernel: [<c0224a74>] kobj_attr_store+0x24/0x30
Apr 14 18:43:07 thinky kernel: [<c01f3351>] sysfs_write_file+0xa1/0x100
Apr 14 18:43:07 thinky kernel: [<c01f32b0>] sysfs_write_file+0x0/0x100
Apr 14 18:43:07 thinky kernel: [<c01a8df0>] vfs_write+0xa0/0x160
Apr 14 18:43:07 thinky kernel: [<c01a8f81>] sys_write+0x41/0x80
Apr 14 18:43:07 thinky kernel: [<c0103ea3>] sysenter_do_call+0x12/0x2f
Apr 14 18:43:07 thinky kernel: ---[ end trace 2b9e3dc85bad025f ]---
Apr 14 18:43:07 thinky kernel: agpgart-intel 0000:00:00.0: restoring config space at offset 0x1 (was 0x900106, writing 0x20900106)
Apr 14 18:43:07 thinky kernel: pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0x68000000)
Apr 14 18:43:07 thinky kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x200000f0)
Apr 14 18:43:07 thinky kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x1821)
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0x1841)
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x1861)
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.3: restoring config space at offset 0xf (was 0x400, writing 0x40b)
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.3: restoring config space at offset 0x8 (was 0x1, writing 0x1881)
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x400, writing 0x40b)
Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xa0040000)
Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102)
Apr 14 18:43:07 thinky kernel: Intel ICH 0000:00:1e.2: restoring config space at offset 0x1 (was 0x2900007, writing 0x2900003)
Apr 14 18:43:07 thinky kernel: tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xac820000)
Apr 14 18:43:07 thinky kernel: tg3 0000:02:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
Apr 14 18:43:07 thinky kernel: sdhci-pci 0000:04:00.1: restoring config space at offset 0x4 (was 0x0, writing 0xa0211000)
Apr 14 18:43:07 thinky kernel: sdhci-pci 0000:04:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
Apr 14 18:43:07 thinky kernel: sdhci-pci 0000:04:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
Apr 14 18:43:07 thinky kernel: ath5k 0000:04:02.0: restoring config space at offset 0x3 (was 0x5008, writing 0xa808)
Apr 14 18:43:07 thinky kernel: ACPI: Waking up from system sleep state S3
Apr 14 18:43:07 thinky kernel: ACPI: EC: non-query interrupt received, switching to interrupt mode
Apr 14 18:43:07 thinky kernel: agpgart-intel 0000:00:00.0: restoring config space at offset 0x1 (was 0x900106, writing 0x20900106)
Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: PME# disabled
Apr 14 18:43:07 thinky kernel: pci 0000:00:02.1: PME# disabled
Apr 14 18:43:07 thinky kernel: pcieport-driver 0000:00:1c.0: setting latency timer to 64
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: setting latency timer to 64
Apr 14 18:43:07 thinky kernel: usb usb2: root hub lost power or was reset
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: setting latency timer to 64
Apr 14 18:43:07 thinky kernel: usb usb3: root hub lost power or was reset
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.2: setting latency timer to 64
Apr 14 18:43:07 thinky kernel: usb usb4: root hub lost power or was reset
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.3: setting latency timer to 64
Apr 14 18:43:07 thinky kernel: usb usb5: root hub lost power or was reset
Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: PME# disabled
Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: setting latency timer to 64
Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: PME# disabled
Apr 14 18:43:07 thinky kernel: pci 0000:00:1e.0: setting latency timer to 64
Apr 14 18:43:07 thinky kernel: Intel ICH 0000:00:1e.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Apr 14 18:43:07 thinky kernel: Intel ICH 0000:00:1e.2: setting latency timer to 64
Apr 14 18:43:07 thinky kernel: ata_piix 0000:00:1f.2: setting latency timer to 64
Apr 14 18:43:07 thinky kernel: tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xac820000)
Apr 14 18:43:07 thinky kernel: tg3 0000:02:00.0: PME# disabled
Apr 14 18:43:07 thinky kernel: sdhci-pci 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Apr 14 18:43:07 thinky kernel: ath5k 0000:04:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
Apr 14 18:43:07 thinky kernel: serial 00:09: activated
Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Starting disk
Apr 14 18:43:07 thinky kernel: ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
Apr 14 18:43:07 thinky kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
Apr 14 18:43:07 thinky kernel: ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
Apr 14 18:43:07 thinky kernel: ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
Apr 14 18:43:07 thinky kernel: ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
Apr 14 18:43:07 thinky kernel: ata1.00: configured for UDMA/100
Apr 14 18:43:07 thinky kernel: ata1.00: configured for UDMA/100
Apr 14 18:43:07 thinky kernel: ata1: EH complete
Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors: (40.0 GB/37.2 GiB)
Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Write Protect is off
Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors: (40.0 GB/37.2 GiB)
Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Write Protect is off
Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Apr 14 18:43:07 thinky kernel: usb 4-2: reset full speed USB device using uhci_hcd and address 2
Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: power state changed by ACPI to D0
Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: power state changed by ACPI to D0
Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: setting latency timer to 64
Apr 14 18:43:07 thinky kernel: Restarting tasks ... done.
Apr 14 18:43:07 thinky acpid: client 9040[0:0] has disconnected
Apr 14 18:43:07 thinky logger: ACPI group/action undefined: processor / CPU
Apr 14 18:43:07 thinky acpid: client connected from 9040[0:0]
Apr 14 18:43:07 thinky acpid: 1 client rule loaded
Apr 14 18:43:08 thinky dhcpcd[7651]: wlan0: carrier lost
Apr 14 18:43:08 thinky kernel: wlan0: deauthenticating by local choice (reason=14)
Apr 14 18:43:08 thinky kernel: wlan0: direct probe to AP 00:12:bf:a2:a5:5b try 1
Apr 14 18:43:09 thinky kernel: ath5k phy0: noise floor calibration timeout (2452MHz)
Apr 14 18:43:13 thinky kernel: wlan0: direct probe to AP 00:12:bf:a2:a5:5b try 1
Apr 14 18:43:13 thinky kernel: wlan0 direct probe responded
Apr 14 18:43:13 thinky kernel: wlan0: authenticate with AP 00:12:bf:a2:a5:5b
Apr 14 18:43:13 thinky kernel: wlan0: authenticated
Apr 14 18:43:13 thinky kernel: wlan0: associate with AP 00:12:bf:a2:a5:5b
Apr 14 18:43:13 thinky kernel: wlan0: deauthenticated (Reason: 1)
Apr 14 18:43:14 thinky kernel: wlan0: direct probe to AP 00:12:bf:a2:a5:5b try 2
Apr 14 18:43:14 thinky kernel: wlan0 direct probe responded
Apr 14 18:43:14 thinky kernel: wlan0: authenticate with AP 00:12:bf:a2:a5:5b
Apr 14 18:43:14 thinky kernel: wlan0: authenticated
Apr 14 18:43:14 thinky kernel: wlan0: associate with AP 00:12:bf:a2:a5:5b
Apr 14 18:43:14 thinky kernel: wlan0: deauthenticated (Reason: 1)
Apr 14 18:43:15 thinky kernel: wlan0: direct probe to AP 00:12:bf:a2:a5:5b try 3
Apr 14 18:43:15 thinky kernel: wlan0 direct probe responded
Apr 14 18:43:15 thinky kernel: wlan0: authenticate with AP 00:12:bf:a2:a5:5b
Apr 14 18:43:15 thinky kernel: wlan0: authenticated
Apr 14 18:43:15 thinky kernel: wlan0: associate with AP 00:12:bf:a2:a5:5b
Apr 14 18:43:15 thinky kernel: wlan0: deauthenticated (Reason: 1)
Apr 14 18:43:16 thinky kernel: wlan0: direct probe to AP 00:12:bf:a2:a5:5b timed out
Apr 14 18:43:19 thinky logger: ACPI group/action undefined: ibm/hotkey / HKEY
Apr 14 18:43:19 thinky kernel: [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
Apr 14 19:27:27 thinky syslog-ng[5106]: syslog-ng starting up; version='3.0.1'
Apr 14 19:27:27 thinky kernel: Linux version 2.6.29-ARCH (root@T-POWA-LX) (gcc version 4.3.3 (GCC) ) #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009
Apr 14 19:27:27 thinky kernel: KERNEL supported cpus:
Apr 14 19:27:27 thinky kernel: Intel GenuineIntel -
[SOLVED] intel 855GM, Xorg 1.6.1 and black screen
Just installed Arch on my desktop and have the following problem:
I have generated x.conf.new using X -configure and that resulted in two Device sections for
cards - "0:2:0" and "0:2:1" Bus ID. With this configuration X refused to load with message
"Can not set Bus ID", buy either removing section with "0:2:1" completely or by just removing
"Bus ID" parameter I was able to start X, but it presents only black screen and hangs.
I have seen several issues like mine on this boards but neither has a solution to fix my problem:
1) I tried to switch to xf86-video-intel-legacy - same behavior
2) Tried to use i810 driver instead of intel - "no devices found"
3) Tried to start X without config file (only using hal) - just hangs badly, black screen and non responsive
4) Tried disabling autoconfiguration - black screen
5) Tried disabling DRI - black screen
6) Tried switching to XAA - black screen
7) Tried "ForceEnablePipeA "true" - black screen
8) Tried ignoring one of the monitors using "monitor-VGA", "monitor-LVDS" in device section - black screen
Anything else I can try? Video Adapter is Intel 82852/855GM at 00:02.0
Xorg log file with "ModeDebug" true
X.Org X Server 1.6.1
Release Date: 2009-4-14
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-ARCH i686
Current Operating System: Linux darkzone-mobile 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 29 14:25:30 UTC 2009 i686
Build Date: 15 April 2009 11:09:10AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat May 9 20:32:36 2009
(++) Using config file: "xorg.conf.new"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Internal LCD"
(**) | |-->Device "Card0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/TTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/TTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0x1a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0@0:2:0) Intel Corporation 82852/855GM Integrated Graphics Device rev 2, Mem @ 0xf0000000/134217728, 0xfeb00000/524288, I/O @ 0x0000dc00/8
(--) PCI: (0@0:2:1) Intel Corporation 82852/855GM Integrated Graphics Device rev 2, Mem @ 0xe8000000/134217728, 0xfea80000/524288
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 2.6.3
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33,
Mobile IntelВ® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(**) intel(0): Option "AccelMethod" "XAA"
(**) intel(0): Option "DRI" "False"
(**) intel(0): Option "ModeDebug" "True"
(II) intel(0): Integrated Graphics Chipset: Intel(R) 855GM
(--) intel(0): Chipset: "852GM/855GM"
(--) intel(0): Linear framebuffer at 0xF0000000
(--) intel(0): IO registers at addr 0xFEB00000
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(**) intel(0): Using XAA for acceleration
(II) intel(0): Hardware state on X startup:
(II) intel(0): DumpRegsBegin
(II) intel(0): CHDECMISC: 0x00000000 (none, ch2 enh disabled, ch1 enh disabled, ch0 enh disabled, flex disabled, ep not present)
(II) intel(0): C0DRB0: 0x00000000 (0x0000)
(II) intel(0): C0DRB1: 0x00000000 (0x0000)
(II) intel(0): C0DRB2: 0x00000000 (0x0000)
(II) intel(0): C0DRB3: 0x00000000 (0x0000)
(II) intel(0): C1DRB0: 0x00000000 (0x0000)
(II) intel(0): C1DRB1: 0x00000000 (0x0000)
(II) intel(0): C1DRB2: 0x00000000 (0x0000)
(II) intel(0): C1DRB3: 0x00000000 (0x0000)
(II) intel(0): C0DRA01: 0x00000000 (0x0000)
(II) intel(0): C0DRA23: 0x00000000 (0x0000)
(II) intel(0): C1DRA01: 0x00000000 (0x0000)
(II) intel(0): C1DRA23: 0x00000000 (0x0000)
(II) intel(0): VCLK_DIVISOR_VGA0: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406 (n = 3, m1 = 20, m2 = 6)
(II) intel(0): VCLK_POST_DIV: 0x0000888b (vga0 p1 = 13, p2 = 4, vga1 p1 = 10, p2 = 4)
(II) intel(0): DPLL_TEST: 0x00000000 (, DPLLA input buffer disabled, DPLLB input buffer disabled)
(II) intel(0): CACHE_MODE_0: 0x00000000
(II) intel(0): D_STATE: 0x0000030f
(II) intel(0): DSPCLK_GATE_D: 0x00000000 (clock gates disabled:)
(II) intel(0): RENCLK_GATE_D1: 0x00000000
(II) intel(0): RENCLK_GATE_D2: 0x00000000
(II) intel(0): SDVOB: 0x00000000 (disabled, pipe A, stall disabled, not detected)
(II) intel(0): SDVOC: 0x00000000 (disabled, pipe A, stall disabled, not detected)
(II) intel(0): SDVOUDI: 0x00000000
(II) intel(0): DSPARB: 0x00015455
(II) intel(0): DSPFW1: 0x00000000
(II) intel(0): DSPFW2: 0x00000000
(II) intel(0): DSPFW3: 0x00000000
(II) intel(0): ADPA: 0x00001c18 (disabled, pipe A, +hsync, +vsync)
(II) intel(0): LVDS: 0xc0000300 (enabled, pipe B, 18 bit, 1 channel)
(II) intel(0): DVOA: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOB: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOC: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOA_SRCDIM: 0x00000000
(II) intel(0): DVOB_SRCDIM: 0x00000000
(II) intel(0): DVOC_SRCDIM: 0x00000000
(II) intel(0): PP_CONTROL: 0x00000001 (power target: on)
(II) intel(0): PP_STATUS: 0xc0000008 (on, ready, sequencing idle)
(II) intel(0): PP_ON_DELAYS: 0x019007d0
(II) intel(0): PP_OFF_DELAYS: 0x01f407d0
(II) intel(0): PP_DIVISOR: 0x00270f04
(II) intel(0): PFIT_CONTROL: 0x80000668
(II) intel(0): PFIT_PGM_RATIOS: 0x00000000
(II) intel(0): PORT_HOTPLUG_EN: 0x00000000
(II) intel(0): PORT_HOTPLUG_STAT: 0x00000000
(II) intel(0): DSPACNTR: 0x00000000 (disabled, pipe A)
(II) intel(0): DSPASTRIDE: 0x00000000 (0 bytes)
(II) intel(0): DSPAPOS: 0x00000000 (0, 0)
(II) intel(0): DSPASIZE: 0x00000000 (1, 1)
(II) intel(0): DSPABASE: 0x00000000
(II) intel(0): DSPASURF: 0x00000000
(II) intel(0): DSPATILEOFF: 0x00000000
(II) intel(0): PIPEACONF: 0x80000000 (enabled, single-wide)
(II) intel(0): PIPEASRC: 0x027f01df (640, 480)
(II) intel(0): PIPEASTAT: 0x80000207 (status: FIFO_UNDERRUN VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS)
(II) intel(0): FPA0: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): FPA1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): DPLL_A: 0x808b0000 (enabled, non-dvo, VGA, default clock, DAC/serial mode, p1 = 13, p2 = 4)
(II) intel(0): DPLL_A_MD: 0x00000000
(II) intel(0): HTOTAL_A: 0x031f027f (640 active, 800 total)
(II) intel(0): HBLANK_A: 0x03170287 (648 start, 792 end)
(II) intel(0): HSYNC_A: 0x02ef028f (656 start, 752 end)
(II) intel(0): VTOTAL_A: 0x020c01df (480 active, 525 total)
(II) intel(0): VBLANK_A: 0x020401e7 (488 start, 517 end)
(II) intel(0): VSYNC_A: 0x01eb01e9 (490 start, 492 end)
(II) intel(0): BCLRPAT_A: 0x00000000
(II) intel(0): VSYNCSHIFT_A: 0x00000000
(II) intel(0): DSPBCNTR: 0x49000000 (disabled, pipe B)
(II) intel(0): DSPBSTRIDE: 0x00000280 (640 bytes)
(II) intel(0): DSPBPOS: 0x00000000 (0, 0)
(II) intel(0): DSPBSIZE: 0x01df027f (640, 480)
(II) intel(0): DSPBBASE: 0x00000000
(II) intel(0): DSPBSURF: 0x00000000
(II) intel(0): DSPBTILEOFF: 0x00000000
(II) intel(0): PIPEBCONF: 0x80000000 (enabled, single-wide)
(II) intel(0): PIPEBSRC: 0x027f018f (640, 400)
(II) intel(0): PIPEBSTAT: 0x80000202 (status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS)
(II) intel(0): FPB0: 0x00021406 (n = 2, m1 = 20, m2 = 6)
(II) intel(0): FPB1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): DPLL_B: 0x90020000 (enabled, non-dvo, default clock, LVDS mode, p1 = 2, p2 = 14)
(II) intel(0): DPLL_B_MD: 0x00000000
(II) intel(0): HTOTAL_B: 0x053f03ff (1024 active, 1344 total)
(II) intel(0): HBLANK_B: 0x053f03ff (1024 start, 1344 end)
(II) intel(0): HSYNC_B: 0x048c0407 (1032 start, 1165 end)
(II) intel(0): VTOTAL_B: 0x02700257 (600 active, 625 total)
(II) intel(0): VBLANK_B: 0x02700257 (600 start, 625 end)
(II) intel(0): VSYNC_B: 0x0260025a (603 start, 609 end)
(II) intel(0): BCLRPAT_B: 0x00000000
(II) intel(0): VSYNCSHIFT_B: 0x00000000
(II) intel(0): VCLK_DIVISOR_VGA0: 0x00021207
(II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406
(II) intel(0): VCLK_POST_DIV: 0x0000888b
(II) intel(0): VGACNTRL: 0x2204008e (enabled)
(II) intel(0): TV_CTL: 0x00000000
(II) intel(0): TV_DAC: 0x00000000
(II) intel(0): TV_CSC_Y: 0x00000000
(II) intel(0): TV_CSC_Y2: 0x00000000
(II) intel(0): TV_CSC_U: 0x00000000
(II) intel(0): TV_CSC_U2: 0x00000000
(II) intel(0): TV_CSC_V: 0x00000000
(II) intel(0): TV_CSC_V2: 0x00000000
(II) intel(0): TV_CLR_KNOBS: 0x00000000
(II) intel(0): TV_CLR_LEVEL: 0x00000000
(II) intel(0): TV_H_CTL_1: 0x00000000
(II) intel(0): TV_H_CTL_2: 0x00000000
(II) intel(0): TV_H_CTL_3: 0x00000000
(II) intel(0): TV_V_CTL_1: 0x00000000
(II) intel(0): TV_V_CTL_2: 0x00000000
(II) intel(0): TV_V_CTL_3: 0x00000000
(II) intel(0): TV_V_CTL_4: 0x00000000
(II) intel(0): TV_V_CTL_5: 0x00000000
(II) intel(0): TV_V_CTL_6: 0x00000000
(II) intel(0): TV_V_CTL_7: 0x00000000
(II) intel(0): TV_SC_CTL_1: 0x00000000
(II) intel(0): TV_SC_CTL_2: 0x00000000
(II) intel(0): TV_SC_CTL_3: 0x00000000
(II) intel(0): TV_WIN_POS: 0x00000000
(II) intel(0): TV_WIN_SIZE: 0x00000000
(II) intel(0): TV_FILTER_CTL_1: 0x00000000
(II) intel(0): TV_FILTER_CTL_2: 0x00000000
(II) intel(0): TV_FILTER_CTL_3: 0x00000000
(II) intel(0): TV_CC_CONTROL: 0x00000000
(II) intel(0): TV_CC_DATA: 0x00000000
(II) intel(0): TV_H_LUMA_0: 0x00000000
(II) intel(0): TV_H_LUMA_59: 0x00000000
(II) intel(0): TV_H_CHROMA_0: 0x00000000
(II) intel(0): TV_H_CHROMA_59: 0x00000000
(II) intel(0): FBC_CFB_BASE: 0x00000000
(II) intel(0): FBC_LL_BASE: 0x00000000
(II) intel(0): FBC_CONTROL: 0x00000000
(II) intel(0): FBC_COMMAND: 0x00000000
(II) intel(0): FBC_STATUS: 0x20000000
(II) intel(0): FBC_CONTROL2: 0x00000000
(II) intel(0): FBC_FENCE_OFF: 0x00000000
(II) intel(0): FBC_MOD_NUM: 0x00000000
(II) intel(0): MI_MODE: 0x00000000
(II) intel(0): MI_ARB_STATE: 0x00000000
(II) intel(0): MI_RDRET_STATE: 0x00000000
(II) intel(0): ECOSKPD: 0x00000307
(II) intel(0): DP_B: 0x00000000
(II) intel(0): DPB_AUX_CH_CTL: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA5: 0x00000000
(II) intel(0): DP_C: 0x00000000
(II) intel(0): DPC_AUX_CH_CTL: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA5: 0x00000000
(II) intel(0): DP_D: 0x00000000
(II) intel(0): DPD_AUX_CH_CTL: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA5: 0x00000000
(II) intel(0): pipe A dot 25153 n 2 m1 18 m2 7 p1 13 p2 4
(II) intel(0): pipe B dot 50571 n 2 m1 20 m2 6 p1 2 p2 14
(II) intel(0): DumpRegsEnd
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section External VGA
(**) intel(0): Option "Ignore" "True"
(II) intel(0): Output LVDS using monitor section Internal LCD
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): found backlight control method /sys/class/backlight/asus-laptop
(II) intel(0): I2C bus "DVODDC_D" initialized.
(II) Loading sub module "sil164"
(II) LoadModule: "sil164"
(II) Loading /usr/lib/xorg/modules/drivers//sil164.so
(II) Module sil164: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ch7xxx"
(II) LoadModule: "ch7xxx"
(II) Loading /usr/lib/xorg/modules/drivers//ch7xxx.so
(II) Module ch7xxx: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ivch"
(II) LoadModule: "ivch"
(II) Loading /usr/lib/xorg/modules/drivers//ivch.so
(II) Module ivch: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_B" initialized.
(II) Loading sub module "tfp410"
(II) LoadModule: "tfp410"
(II) Loading /usr/lib/xorg/modules/drivers//tfp410.so
(II) Module tfp410: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_B" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ch7017"
(II) LoadModule: "ch7017"
(II) Loading /usr/lib/xorg/modules/drivers//ch7017.so
(II) Module ch7017: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVODDC_D" removed.
(II) intel(0): Resizable framebuffer: not available (0 2)
(II) intel(0): EDID for output LVDS
(II) intel(0): Not using default mode "1024x768" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1024x768" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1024x768" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1024x768" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) intel(0): Not using default mode "832x624" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) intel(0): Printing probed modes for output LVDS
(II) intel(0): Modeline "1024x600"x60.0 50.40 1024 1032 1165 1344 600 603 609 625 (37.5 kHz)
(II) intel(0): Modeline "800x600"x85.1 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz)
(II) intel(0): Output LVDS connected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS using initial mode 1024x600
(II) intel(0): detected 128 kB GTT.
(II) intel(0): detected 8060 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.2.1
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 50176 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 200700 kB available
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 131072 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(WW) intel(0): xf86AllocateGARTMemory: allocation of 1536 pages failed
(Cannot allocate memory)
(WW) intel(0): Allocation error, framebuffer compression disabled
(WW) intel(0): xf86AllocateGARTMemory: allocation of 10 pages failed
(Cannot allocate memory)
(II) intel(0): Allocating 3072 scanlines for pixmap cache
(II) intel(0): Tiled allocation successful.
(II) intel(0): adjusting plane->pipe mappings to allow for framebuffer compression
(II) intel(0): Page Flipping disabled
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) intel(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Horizontal and Vertical Lines
Setting up tile and stipple cache:
32 128x128 slots
16 256x256 slots
6 512x512 slots
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x007df000 (pgoffset 2015)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x007e0000 (pgoffset 2016)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x007e4000 (pgoffset 2020)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x007e5000 (pgoffset 2021)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x007e9000 (pgoffset 2025)
(II) intel(0): xf86BindGARTMemory: bind key 5 at 0x01000000 (pgoffset 4096)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x0011ffff: fake bufmgr (1024 kB)
(II) intel(0): 0x00120000-0x0012ffff: xaa scratch (64 kB)
(II) intel(0): 0x007df000: end of stolen memory
(II) intel(0): 0x007df000-0x007dffff: Core cursor (4 kB, 0x000000000d6b8000 physical
(II) intel(0): 0x007e0000-0x007e3fff: ARGB cursor (16 kB, 0x000000000b04c000 physical
(II) intel(0): 0x007e4000-0x007e4fff: Core cursor (4 kB, 0x000000000b08d000 physical
(II) intel(0): 0x007e5000-0x007e8fff: ARGB cursor (16 kB, 0x000000000b040000 physical
(II) intel(0): 0x007e9000-0x007e9fff: overlay registers (4 kB, 0x000000000d7fa000 physical
(II) intel(0): 0x01000000-0x01ffffff: front buffer (16384 kB)
(II) intel(0): 0x08000000: end of aperture
(WW) intel(0): Chosen PLL clock of 48.0 Mhz more than 2% away from desired 50.4 Mhz
(II) intel(0): Mode for pipe B:
(II) intel(0): Modeline "1024x600"x60.0 50.40 1024 1032 1165 1344 600 603 609 625 (37.5 kHz)
(II) intel(0): chosen: dotclock 48000 vco 1344000 ((m 140, m1 23, m2 13), n 3, (p 28, p1 2, p2 14))
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Mode for pipe A:
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(II) intel(0): chosen: dotclock 31500 vco 1008000 ((m 126, m1 20, m2 14), n 4, (p 32, p1 8, p2 4))
(II) intel(0): Hardware state at EnterVT:
(II) intel(0): DumpRegsBegin
(II) intel(0): CHDECMISC: 0x00000000 (none, ch2 enh disabled, ch1 enh disabled, ch0 enh disabled, flex disabled, ep not present)
(II) intel(0): C0DRB0: 0x00000000 (0x0000)
(II) intel(0): C0DRB1: 0x00000000 (0x0000)
(II) intel(0): C0DRB2: 0x00000000 (0x0000)
(II) intel(0): C0DRB3: 0x00000000 (0x0000)
(II) intel(0): C1DRB0: 0x00000000 (0x0000)
(II) intel(0): C1DRB1: 0x00000000 (0x0000)
(II) intel(0): C1DRB2: 0x00000000 (0x0000)
(II) intel(0): C1DRB3: 0x00000000 (0x0000)
(II) intel(0): C0DRA01: 0x00000000 (0x0000)
(II) intel(0): C0DRA23: 0x00000000 (0x0000)
(II) intel(0): C1DRA01: 0x00000000 (0x0000)
(II) intel(0): C1DRA23: 0x00000000 (0x0000)
(II) intel(0): VCLK_DIVISOR_VGA0: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406 (n = 3, m1 = 20, m2 = 6)
(II) intel(0): VCLK_POST_DIV: 0x0000888b (vga0 p1 = 13, p2 = 4, vga1 p1 = 10, p2 = 4)
(II) intel(0): DPLL_TEST: 0x00000000 (, DPLLA input buffer disabled, DPLLB input buffer disabled)
(II) intel(0): CACHE_MODE_0: 0x00000000
(II) intel(0): D_STATE: 0x0000030f
(II) intel(0): DSPCLK_GATE_D: 0x00000000 (clock gates disabled:)
(II) intel(0): RENCLK_GATE_D1: 0x00000001
(II) intel(0): RENCLK_GATE_D2: 0x00000000
(II) intel(0): SDVOB: 0x00000000 (disabled, pipe A, stall disabled, not detected)
(II) intel(0): SDVOC: 0x00000000 (disabled, pipe A, stall disabled, not detected)
(II) intel(0): SDVOUDI: 0x00000000
(II) intel(0): DSPARB: 0x0001feff
(II) intel(0): DSPFW1: 0x00000000
(II) intel(0): DSPFW2: 0x00000000
(II) intel(0): DSPFW3: 0x00000000
(II) intel(0): ADPA: 0x00001c18 (disabled, pipe A, +hsync, +vsync)
(II) intel(0): LVDS: 0xc0000300 (enabled, pipe B, 18 bit, 1 channel)
(II) intel(0): DVOA: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOB: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOC: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOA_SRCDIM: 0x00000000
(II) intel(0): DVOB_SRCDIM: 0x00000000
(II) intel(0): DVOC_SRCDIM: 0x00000000
(II) intel(0): PP_CONTROL: 0x00000001 (power target: on)
(II) intel(0): PP_STATUS: 0xd000000a (on, ready, sequencing on)
(II) intel(0): PP_ON_DELAYS: 0x019007d0
(II) intel(0): PP_OFF_DELAYS: 0x01f407d0
(II) intel(0): PP_DIVISOR: 0x00270f04
(II) intel(0): PFIT_CONTROL: 0x00000008
(II) intel(0): PFIT_PGM_RATIOS: 0x00000000
(II) intel(0): PORT_HOTPLUG_EN: 0x00000000
(II) intel(0): PORT_HOTPLUG_STAT: 0x00000000
(II) intel(0): DSPACNTR: 0xd9000000 (enabled, pipe B)
(II) intel(0): DSPASTRIDE: 0x00001000 (4096 bytes)
(II) intel(0): DSPAPOS: 0x00000000 (0, 0)
(II) intel(0): DSPASIZE: 0x025703ff (1024, 600)
(II) intel(0): DSPABASE: 0x01000000
(II) intel(0): DSPASURF: 0x00000000
(II) intel(0): DSPATILEOFF: 0x00000000
(II) intel(0): PIPEACONF: 0x80000000 (enabled, single-wide)
(II) intel(0): PIPEASRC: 0x027f01df (640, 480)
(II) intel(0): PIPEASTAT: 0x80000207 (status: FIFO_UNDERRUN VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS)
(II) intel(0): FPA0: 0x0004140e (n = 4, m1 = 20, m2 = 14)
(II) intel(0): FPA1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): DPLL_A: 0x90860000 (enabled, non-dvo, default clock, DAC/serial mode, p1 = 8, p2 = 4)
(II) intel(0): DPLL_A_MD: 0x00000000
(II) intel(0): HTOTAL_A: 0x033f027f (640 active, 832 total)
(II) intel(0): HBLANK_A: 0x033f027f (640 start, 832 end)
(II) intel(0): HSYNC_A: 0x02bf0297 (664 start, 704 end)
(II) intel(0): VTOTAL_A: 0x020701df (480 active, 520 total)
(II) intel(0): VBLANK_A: 0x020701df (480 start, 520 end)
(II) intel(0): VSYNC_A: 0x01ea01e8 (489 start, 491 end)
(II) intel(0): BCLRPAT_A: 0x00000000
(II) intel(0): VSYNCSHIFT_A: 0x00000000
(II) intel(0): DSPBCNTR: 0x58000000 (disabled, pipe A)
(II) intel(0): DSPBSTRIDE: 0x00001000 (4096 bytes)
(II) intel(0): DSPBPOS: 0x00000000 (0, 0)
(II) intel(0): DSPBSIZE: 0x01df027f (640, 480)
(II) intel(0): DSPBBASE: 0x01000000
(II) intel(0): DSPBSURF: 0x00000000
(II) intel(0): DSPBTILEOFF: 0x00000000
(II) intel(0): PIPEBCONF: 0x80000000 (enabled, single-wide)
(II) intel(0): PIPEBSRC: 0x03ff0257 (1024, 600)
(II) intel(0): PIPEBSTAT: 0x80000202 (status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS)
(II) intel(0): FPB0: 0x0003170d (n = 3, m1 = 23, m2 = 13)
(II) intel(0): FPB1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): DPLL_B: 0x90020000 (enabled, non-dvo, default clock, LVDS mode, p1 = 2, p2 = 14)
(II) intel(0): DPLL_B_MD: 0x00000000
(II) intel(0): HTOTAL_B: 0x053f03ff (1024 active, 1344 total)
(II) intel(0): HBLANK_B: 0x053f03ff (1024 start, 1344 end)
(II) intel(0): HSYNC_B: 0x048c0407 (1032 start, 1165 end)
(II) intel(0): VTOTAL_B: 0x02700257 (600 active, 625 total)
(II) intel(0): VBLANK_B: 0x02700257 (600 start, 625 end)
(II) intel(0): VSYNC_B: 0x0260025a (603 start, 609 end)
(II) intel(0): BCLRPAT_B: 0x00000000
(II) intel(0): VSYNCSHIFT_B: 0x00000000
(II) intel(0): VCLK_DIVISOR_VGA0: 0x00021207
(II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406
(II) intel(0): VCLK_POST_DIV: 0x0000888b
(II) intel(0): VGACNTRL: 0xa204008e (disabled)
(II) intel(0): TV_CTL: 0x00000000
(II) intel(0): TV_DAC: 0x00000000
(II) intel(0): TV_CSC_Y: 0x00000000
(II) intel(0): TV_CSC_Y2: 0x00000000
(II) intel(0): TV_CSC_U: 0x00000000
(II) intel(0): TV_CSC_U2: 0x00000000
(II) intel(0): TV_CSC_V: 0x00000000
(II) intel(0): TV_CSC_V2: 0x00000000
(II) intel(0): TV_CLR_KNOBS: 0x00000000
(II) intel(0): TV_CLR_LEVEL: 0x00000000
(II) intel(0): TV_H_CTL_1: 0x00000000
(II) intel(0): TV_H_CTL_2: 0x00000000
(II) intel(0): TV_H_CTL_3: 0x00000000
(II) intel(0): TV_V_CTL_1: 0x00000000
(II) intel(0): TV_V_CTL_2: 0x00000000
(II) intel(0): TV_V_CTL_3: 0x00000000
(II) intel(0): TV_V_CTL_4: 0x00000000
(II) intel(0): TV_V_CTL_5: 0x00000000
(II) intel(0): TV_V_CTL_6: 0x00000000
(II) intel(0): TV_V_CTL_7: 0x00000000
(II) intel(0): TV_SC_CTL_1: 0x00000000
(II) intel(0): TV_SC_CTL_2: 0x00000000
(II) intel(0): TV_SC_CTL_3: 0x00000000
(II) intel(0): TV_WIN_POS: 0x00000000
(II) intel(0): TV_WIN_SIZE: 0x00000000
(II) intel(0): TV_FILTER_CTL_1: 0x00000000
(II) intel(0): TV_FILTER_CTL_2: 0x00000000
(II) intel(0): TV_FILTER_CTL_3: 0x00000000
(II) intel(0): TV_CC_CONTROL: 0x00000000
(II) intel(0): TV_CC_DATA: 0x00000000
(II) intel(0): TV_H_LUMA_0: 0x00000000
(II) intel(0): TV_H_LUMA_59: 0x00000000
(II) intel(0): TV_H_CHROMA_0: 0x00000000
(II) intel(0): TV_H_CHROMA_59: 0x00000000
(II) intel(0): FBC_CFB_BASE: 0x00000000
(II) intel(0): FBC_LL_BASE: 0x00000000
(II) intel(0): FBC_CONTROL: 0x00000000
(II) intel(0): FBC_COMMAND: 0x00000000
(II) intel(0): FBC_STATUS: 0x20000000
(II) intel(0): FBC_CONTROL2: 0x00000000
(II) intel(0): FBC_FENCE_OFF: 0x00000000
(II) intel(0): FBC_MOD_NUM: 0x00000000
(II) intel(0): MI_MODE: 0x00000000
(II) intel(0): MI_ARB_STATE: 0x00000000
(II) intel(0): MI_RDRET_STATE: 0x00000000
(II) intel(0): ECOSKPD: 0x00000307
(II) intel(0): DP_B: 0x00000000
(II) intel(0): DPB_AUX_CH_CTL: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA5: 0x00000000
(II) intel(0): DP_C: 0x00000000
(II) intel(0): DPC_AUX_CH_CTL: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA5: 0x00000000
(II) intel(0): DP_D: 0x00000000
(II) intel(0): DPD_AUX_CH_CTL: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA5: 0x00000000
(II) intel(0): pipe A dot 31500 n 4 m1 20 m2 14 p1 8 p2 4
(II) intel(0): pipe B dot 48000 n 3 m1 23 m2 13 p1 2 p2 14
(II) intel(0): DumpRegsEnd
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane B is now disabled and connected to pipe A.
(WW) intel(0): Hardware claims pipe A is on while software believes it is off
(II) intel(0): Pipe B is on
(II) intel(0): Display plane A is now enabled and connected to pipe B.
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: Disabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) intel(0): Setting screen physical size to 270 x 158
(II) config/hal: Adding input device TPPS/2 IBM TrackPoint
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 2.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) TPPS/2 IBM TrackPoint: always reports core events
(**) TPPS/2 IBM TrackPoint: Device: "/dev/input/event8"
(II) TPPS/2 IBM TrackPoint: Found 3 mouse buttons
(II) TPPS/2 IBM TrackPoint: Found x and y relative axes
(II) TPPS/2 IBM TrackPoint: Configuring as mouse
(**) TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
(**) TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE)
(**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
(**) TPPS/2 IBM TrackPoint: (accel) filter chain progression: 2.00
(**) TPPS/2 IBM TrackPoint: (accel) filter stage 0: 20.00 ms
(**) TPPS/2 IBM TrackPoint: (accel) set acceleration profile 0
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device Asus Laptop extra buttons
(**) Asus Laptop extra buttons: always reports core events
(**) Asus Laptop extra buttons: Device: "/dev/input/event5"
(II) Asus Laptop extra buttons: Found 1 mouse buttons
(II) Asus Laptop extra buttons: Found keys
(II) Asus Laptop extra buttons: Configuring as keyboard
(**) Asus Laptop extra buttons: YAxisMapping: buttons 4 and 5
(**) Asus Laptop extra buttons: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Asus Laptop extra buttons" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event6"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) TPPS/2 IBM TrackPoint: Close
(II) UnloadModule: "evdev"
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
(II) Asus Laptop extra buttons: Close
(II) UnloadModule: "evdev"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) Video Bus: Close
(II) UnloadModule: "evdev"
(II) intel(0): Comparing regs from server start up to After LeaveVT
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(II) intel(0): DumpRegsBegin
(II) intel(0): CHDECMISC: 0x00000000 (none, ch2 enh disabled, ch1 enh disabled, ch0 enh disabled, flex disabled, ep not present)
(II) intel(0): C0DRB0: 0x00000000 (0x0000)
(II) intel(0): C0DRB1: 0x00000000 (0x0000)
(II) intel(0): C0DRB2: 0x00000000 (0x0000)
(II) intel(0): C0DRB3: 0x00000000 (0x0000)
(II) intel(0): C1DRB0: 0x00000000 (0x0000)
(II) intel(0): C1DRB1: 0x00000000 (0x0000)
(II) intel(0): C1DRB2: 0x00000000 (0x0000)
(II) intel(0): C1DRB3: 0x00000000 (0x0000)
(II) intel(0): C0DRA01: 0x00000000 (0x0000)
(II) intel(0): C0DRA23: 0x00000000 (0x0000)
(II) intel(0): C1DRA01: 0x00000000 (0x0000)
(II) intel(0): C1DRA23: 0x00000000 (0x0000)
(II) intel(0): VCLK_DIVISOR_VGA0: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406 (n = 3, m1 = 20, m2 = 6)
(II) intel(0): VCLK_POST_DIV: 0x0000888b (vga0 p1 = 13, p2 = 4, vga1 p1 = 10, p2 = 4)
(II) intel(0): DPLL_TEST: 0x00000000 (, DPLLA input buffer disabled, DPLLB input buffer disabled)
(II) intel(0): CACHE_MODE_0: 0x00000000
(II) intel(0): D_STATE: 0x0000030f
(II) intel(0): DSPCLK_GATE_D: 0x00000000 (clock gates disabled:)
(II) intel(0): RENCLK_GATE_D1: 0x00000000
(II) intel(0): RENCLK_GATE_D2: 0x00000000
(II) intel(0): SDVOB: 0x00000000 (disabled, pipe A, stall disabled, not detected)
(II) intel(0): SDVOC: 0x00000000 (disabled, pipe A, stall disabled, not detected)
(II) intel(0): SDVOUDI: 0x00000000
(II) intel(0): DSPARB: 0x00015455
(II) intel(0): DSPFW1: 0x00000000
(II) intel(0): DSPFW2: 0x00000000
(II) intel(0): DSPFW3: 0x00000000
(II) intel(0): ADPA: 0x00001c18 (disabled, pipe A, +hsync, +vsync)
(II) intel(0): LVDS: 0xc0000300 (enabled, pipe B, 18 bit, 1 channel)
(II) intel(0): DVOA: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOB: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOC: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOA_SRCDIM: 0x00000000
(II) intel(0): DVOB_SRCDIM: 0x00000000
(II) intel(0): DVOC_SRCDIM: 0x00000000
(II) intel(0): PP_CONTROL: 0x00000001 (power target: on)
(II) intel(0): PP_STATUS: 0xd000000a (on, ready, sequencing on)
(II) intel(0): PP_ON_DELAYS: 0x019007d0
(II) intel(0): PP_OFF_DELAYS: 0x01f407d0
(II) intel(0): PP_DIVISOR: 0x00270f04
(II) intel(0): PFIT_CONTROL: 0x80000668
(II) intel(0): PFIT_PGM_RATIOS: 0x00000000
(II) intel(0): PORT_HOTPLUG_EN: 0x00000000
(II) intel(0): PORT_HOTPLUG_STAT: 0x00000000
(II) intel(0): DSPACNTR: 0x00000000 (disabled, pipe A)
(II) intel(0): DSPASTRIDE: 0x00000000 (0 bytes)
(II) intel(0): DSPAPOS: 0x00000000 (0, 0)
(II) intel(0): DSPASIZE: 0x00000000 (1, 1)
(II) intel(0): DSPABASE: 0x00000000
(II) intel(0): DSPASURF: 0x00000000
(II) intel(0): DSPATILEOFF: 0x00000000
(II) intel(0): PIPEACONF: 0x80000000 (enabled, single-wide)
(II) intel(0): PIPEASRC: 0x027f01df (640, 480)
(II) intel(0): PIPEASTAT: 0x80000207 (status: FIFO_UNDERRUN VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS)
(II) intel(0): FPA0: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): FPA1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): DPLL_A: 0x808b0000 (enabled, non-dvo, VGA, default clock, DAC/serial mode, p1 = 13, p2 = 4)
(II) intel(0): DPLL_A_MD: 0x00000000
(II) intel(0): HTOTAL_A: 0x031f027f (640 active, 800 total)
(II) intel(0): HBLANK_A: 0x03170287 (648 start, 792 end)
(II) intel(0): HSYNC_A: 0x02ef028f (656 start, 752 end)
(II) intel(0): VTOTAL_A: 0x020c01df (480 active, 525 total)
(II) intel(0): VBLANK_A: 0x020401e7 (488 start, 517 end)
(II) intel(0): VSYNC_A: 0x01eb01e9 (490 start, 492 end)
(II) intel(0): BCLRPAT_A: 0x00000000
(II) intel(0): VSYNCSHIFT_A: 0x00000000
(II) intel(0): DSPBCNTR: 0x49000000 (disabled, pipe B)
(II) intel(0): DSPBSTRIDE: 0x00000280 (640 bytes)
(II) intel(0): DSPBPOS: 0x00000000 (0, 0)
(II) intel(0): DSPBSIZE: 0x01df027f (640, 480)
(II) intel(0): DSPBBASE: 0x00000000
(II) intel(0): DSPBSURF: 0x00000000
(II) intel(0): DSPBTILEOFF: 0x00000000
(II) intel(0): PIPEBCONF: 0x80000000 (enabled, single-wide)
(II) intel(0): PIPEBSRC: 0x027f018f (640, 400)
(II) intel(0): PIPEBSTAT: 0x80000202 (status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS)
(II) intel(0): FPB0: 0x00021406 (n = 2, m1 = 20, m2 = 6)
(II) intel(0): FPB1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): DPLL_B: 0x90020000 (enabled, non-dvo, default clock, LVDS mode, p1 = 2, p2 = 14)
(II) intel(0): DPLL_B_MD: 0x00000000
(II) intel(0): HTOTAL_B: 0x053f03ff (1024 active, 1344 total)
(II) intel(0): HBLANK_B: 0x053f03ff (1024 start, 1344 end)
(II) intel(0): HSYNC_B: 0x048c0407 (1032 start, 1165 end)
(II) intel(0): VTOTAL_B: 0x02700257 (600 active, 625 total)
(II) intel(0): VBLANK_B: 0x02700257 (600 start, 625 end)
(II) intel(0): VSYNC_B: 0x0260025a (603 start, 609 end)
(II) intel(0): BCLRPAT_B: 0x00000000
(II) intel(0): VSYNCSHIFT_B: 0x00000000
(II) intel(0): VCLK_DIVISOR_VGA0: 0x00021207
(II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406
(II) intel(0): VCLK_POST_DIV: 0x0000888b
(II) intel(0): VGACNTRL: 0x2204008e (enabled)
(II) intel(0): TV_CTL: 0x00000000
(II) intel(0): TV_DAC: 0x00000000
(II) intel(0): TV_CSC_Y: 0x00000000
(II) intel(0): TV_CSC_Y2: 0x00000000
(II) intel(0): TV_CSC_U: 0x00000000
(II) intel(0): TV_CSC_U2: 0x00000000
(II) intel(0): TV_CSC_V: 0x00000000
(II) intel(0): TV_CSC_V2: 0x00000000
(II) intel(0): TV_CLR_KNOBS: 0x00000000
(II) intel(0): TV_CLR_LEVEL: 0x00000000
(II) intel(0): TV_H_CTL_1: 0x00000000
(II) intel(0): TV_H_CTL_2: 0x00000000
(II) intel(0): TV_H_CTL_3: 0x00000000
(II) intel(0): TV_V_CTL_1: 0x00000000
(II) intel(0): TV_V_CTL_2: 0x00000000
(II) intel(0): TV_V_CTL_3: 0x00000000
(II) intel(0): TV_V_CTL_4: 0x00000000
(II) intel(0): TV_V_CTL_5: 0x00000000
(II) intel(0): TV_V_CTL_6: 0x00000000
(II) intel(0): TV_V_CTL_7: 0x00000000
(II) intel(0): TV_SC_CTL_1: 0x00000000
(II) intel(0): TV_SC_CTL_2: 0x00000000
(II) intel(0): TV_SC_CTL_3: 0x00000000
(II) intel(0): TV_WIN_POS: 0x00000000
(II) intel(0): TV_WIN_SIZE: 0x00000000
(II) intel(0): TV_FILTER_CTL_1: 0x00000000
(II) intel(0): TV_FILTER_CTL_2: 0x00000000
(II) intel(0): TV_FILTER_CTL_3: 0x00000000
(II) intel(0): TV_CC_CONTROL: 0x00000000
(II) intel(0): TV_CC_DATA: 0x00000000
(II) intel(0): TV_H_LUMA_0: 0x00000000
(II) intel(0): TV_H_LUMA_59: 0x00000000
(II) intel(0): TV_H_CHROMA_0: 0x00000000
(II) intel(0): TV_H_CHROMA_59: 0x00000000
(II) intel(0): FBC_CFB_BASE: 0x00000000
(II) intel(0): FBC_LL_BASE: 0x00000000
(II) intel(0): FBC_CONTROL: 0x00000000
(II) intel(0): FBC_COMMAND: 0x00000000
(II) intel(0): FBC_STATUS: 0x20000000
(II) intel(0): FBC_CONTROL2: 0x00000000
(II) intel(0): FBC_FENCE_OFF: 0x00000000
(II) intel(0): FBC_MOD_NUM: 0x00000000
(II) intel(0): MI_MODE: 0x00000000
(II) intel(0): MI_ARB_STATE: 0x00000000
(II) intel(0): MI_RDRET_STATE: 0x00000000
(II) intel(0): ECOSKPD: 0x00000307
(II) intel(0): DP_B: 0x00000000
(II) intel(0): DPB_AUX_CH_CTL: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA5: 0x00000000
(II) intel(0): DP_C: 0x00000000
(II) intel(0): DPC_AUX_CH_CTL: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA5: 0x00000000
(II) intel(0): DP_D: 0x00000000
(II) intel(0): DPD_AUX_CH_CTL: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA5: 0x00000000
(II) intel(0): pipe A dot 25153 n 2 m1 18 m2 7 p1 13 p2 4
(II) intel(0): pipe B dot 50571 n 2 m1 20 m2 6 p1 2 p2 14
(II) intel(0): DumpRegsEnd
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) intel(0): xf86UnbindGARTMemory: unbind key 1
(II) intel(0): xf86UnbindGARTMemory: unbind key 2
(II) intel(0): xf86UnbindGARTMemory: unbind key 3
(II) intel(0): xf86UnbindGARTMemory: unbind key 4
(II) intel(0): xf86UnbindGARTMemory: unbind key 5
Latest configuration file which still is not working
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "glx"
Load "extmod"
Load "record"
# Load "dri2"
# Load "dri"
Load "dbe"
EndSection
Section "Monitor"
Identifier "Internal LCD"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "External VGA"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
Option "Ignore" "True"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "ColorKey" # <i>
#Option "CacheLines" # <i>
#Option "Dac6Bit" # [<bool>]
Option "DRI" "False" # [<bool>]
Option "AccelMethod" "XAA"
#Option "NoDDC" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "XvMCSurfaces" # <i>
#Option "PageFlip" # [<bool>]
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
Option "monitor-VGA" "External VGA"
Option "monitor-LVDS" "Internal LCD"
Option "ModeDebug" "True"
BoardName "82852/855GM Integrated Graphics Device"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Internal LCD"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card0"
Monitor "External VGA"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Last edited by B0b (2009-05-10 21:07:56)firecat53 wrote:
Try the xf86-intel-video-newest package from AUR.
Scott
Installed 2.7.0 from abs testing.. result is the same.. Unfortunately newest from AUR is not compiling complaining about some
macro stuff
Anything else?
This is log file with 2.7.0 module:
X.Org X Server 1.6.1
Release Date: 2009-4-14
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-ARCH i686
Current Operating System: Linux darkzone-mobile 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 29 14:25:30 UTC 2009 i686
Build Date: 15 April 2009 11:09:10AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat May 9 23:54:58 2009
(++) Using config file: "/root/xorg.conf.new"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Internal LCD"
(**) | |-->Device "Card0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/TTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/TTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0x1a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0@0:2:0) Intel Corporation 82852/855GM Integrated Graphics Device rev 2, Mem @ 0xf0000000/134217728, 0xfeb00000/524288, I/O @ 0x0000dc00/8
(--) PCI: (0@0:2:1) Intel Corporation 82852/855GM Integrated Graphics Device rev 2, Mem @ 0xe8000000/134217728, 0xfea80000/524288
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 2.7.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35,
965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
Mobile IntelВ® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(**) intel(0): Option "AccelMethod" "XAA"
(**) intel(0): Option "DRI" "False"
(**) intel(0): Option "ModeDebug" "True"
(II) intel(0): Integrated Graphics Chipset: Intel(R) 855GM
(--) intel(0): Chipset: "852GM/855GM"
(--) intel(0): Linear framebuffer at 0xF0000000
(--) intel(0): IO registers at addr 0xFEB00000
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(**) intel(0): Using XAA for acceleration
(II) intel(0): Hardware state on X startup:
(II) intel(0): DumpRegsBegin
(II) intel(0): CHDECMISC: 0x00000000 (none, ch2 enh disabled, ch1 enh disabled, ch0 enh disabled, flex disabled, ep not present)
(II) intel(0): C0DRB0: 0x00000000 (0x0000)
(II) intel(0): C0DRB1: 0x00000000 (0x0000)
(II) intel(0): C0DRB2: 0x00000000 (0x0000)
(II) intel(0): C0DRB3: 0x00000000 (0x0000)
(II) intel(0): C1DRB0: 0x00000000 (0x0000)
(II) intel(0): C1DRB1: 0x00000000 (0x0000)
(II) intel(0): C1DRB2: 0x00000000 (0x0000)
(II) intel(0): C1DRB3: 0x00000000 (0x0000)
(II) intel(0): C0DRA01: 0x00000000 (0x0000)
(II) intel(0): C0DRA23: 0x00000000 (0x0000)
(II) intel(0): C1DRA01: 0x00000000 (0x0000)
(II) intel(0): C1DRA23: 0x00000000 (0x0000)
(II) intel(0): VCLK_DIVISOR_VGA0: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406 (n = 3, m1 = 20, m2 = 6)
(II) intel(0): VCLK_POST_DIV: 0x0000888b (vga0 p1 = 13, p2 = 4, vga1 p1 = 10, p2 = 4)
(II) intel(0): DPLL_TEST: 0x00000000 (, DPLLA input buffer disabled, DPLLB input buffer disabled)
(II) intel(0): CACHE_MODE_0: 0x00000000
(II) intel(0): D_STATE: 0x0000030f
(II) intel(0): DSPCLK_GATE_D: 0x00000000 (clock gates disabled:)
(II) intel(0): RENCLK_GATE_D1: 0x00000000
(II) intel(0): RENCLK_GATE_D2: 0x00000000
(II) intel(0): SDVOB: 0x00000000 (disabled, pipe A, stall disabled, not detected)
(II) intel(0): SDVOC: 0x00000000 (disabled, pipe A, stall disabled, not detected)
(II) intel(0): SDVOUDI: 0x00000000
(II) intel(0): DSPARB: 0x00015455
(II) intel(0): DSPFW1: 0x00000000
(II) intel(0): DSPFW2: 0x00000000
(II) intel(0): DSPFW3: 0x00000000
(II) intel(0): ADPA: 0x00001c18 (disabled, pipe A, +hsync, +vsync)
(II) intel(0): LVDS: 0xc0000300 (enabled, pipe B, 18 bit, 1 channel)
(II) intel(0): DVOA: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOB: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOC: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOA_SRCDIM: 0x00000000
(II) intel(0): DVOB_SRCDIM: 0x00000000
(II) intel(0): DVOC_SRCDIM: 0x00000000
(II) intel(0): PP_CONTROL: 0x00000001 (power target: on)
(II) intel(0): PP_STATUS: 0xc0000008 (on, ready, sequencing idle)
(II) intel(0): PP_ON_DELAYS: 0x019007d0
(II) intel(0): PP_OFF_DELAYS: 0x01f407d0
(II) intel(0): PP_DIVISOR: 0x00270f04
(II) intel(0): PFIT_CONTROL: 0x80000668
(II) intel(0): PFIT_PGM_RATIOS: 0x00000000
(II) intel(0): PORT_HOTPLUG_EN: 0x00000000
(II) intel(0): PORT_HOTPLUG_STAT: 0x00000000
(II) intel(0): DSPACNTR: 0x00000000 (disabled, pipe A)
(II) intel(0): DSPASTRIDE: 0x00000000 (0 bytes)
(II) intel(0): DSPAPOS: 0x00000000 (0, 0)
(II) intel(0): DSPASIZE: 0x00000000 (1, 1)
(II) intel(0): DSPABASE: 0x00000000
(II) intel(0): DSPASURF: 0x00000000
(II) intel(0): DSPATILEOFF: 0x00000000
(II) intel(0): PIPEACONF: 0x80000000 (enabled, single-wide)
(II) intel(0): PIPEASRC: 0x027f01df (640, 480)
(II) intel(0): PIPEASTAT: 0x80000207 (status: FIFO_UNDERRUN VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS)
(II) intel(0): FPA0: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): FPA1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): DPLL_A: 0x808b0000 (enabled, non-dvo, VGA, default clock, DAC/serial mode, p1 = 13, p2 = 4)
(II) intel(0): DPLL_A_MD: 0x00000000
(II) intel(0): HTOTAL_A: 0x031f027f (640 active, 800 total)
(II) intel(0): HBLANK_A: 0x03170287 (648 start, 792 end)
(II) intel(0): HSYNC_A: 0x02ef028f (656 start, 752 end)
(II) intel(0): VTOTAL_A: 0x020c01df (480 active, 525 total)
(II) intel(0): VBLANK_A: 0x020401e7 (488 start, 517 end)
(II) intel(0): VSYNC_A: 0x01eb01e9 (490 start, 492 end)
(II) intel(0): BCLRPAT_A: 0x00000000
(II) intel(0): VSYNCSHIFT_A: 0x00000000
(II) intel(0): DSPBCNTR: 0x49000000 (disabled, pipe B)
(II) intel(0): DSPBSTRIDE: 0x00000280 (640 bytes)
(II) intel(0): DSPBPOS: 0x00000000 (0, 0)
(II) intel(0): DSPBSIZE: 0x01df027f (640, 480)
(II) intel(0): DSPBBASE: 0x00000000
(II) intel(0): DSPBSURF: 0x00000000
(II) intel(0): DSPBTILEOFF: 0x00000000
(II) intel(0): PIPEBCONF: 0x80000000 (enabled, single-wide)
(II) intel(0): PIPEBSRC: 0x027f018f (640, 400)
(II) intel(0): PIPEBSTAT: 0x80000202 (status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS)
(II) intel(0): FPB0: 0x00021406 (n = 2, m1 = 20, m2 = 6)
(II) intel(0): FPB1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): DPLL_B: 0x90020000 (enabled, non-dvo, default clock, LVDS mode, p1 = 2, p2 = 14)
(II) intel(0): DPLL_B_MD: 0x00000000
(II) intel(0): HTOTAL_B: 0x053f03ff (1024 active, 1344 total)
(II) intel(0): HBLANK_B: 0x053f03ff (1024 start, 1344 end)
(II) intel(0): HSYNC_B: 0x048c0407 (1032 start, 1165 end)
(II) intel(0): VTOTAL_B: 0x02700257 (600 active, 625 total)
(II) intel(0): VBLANK_B: 0x02700257 (600 start, 625 end)
(II) intel(0): VSYNC_B: 0x0260025a (603 start, 609 end)
(II) intel(0): BCLRPAT_B: 0x00000000
(II) intel(0): VSYNCSHIFT_B: 0x00000000
(II) intel(0): VCLK_DIVISOR_VGA0: 0x00021207
(II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406
(II) intel(0): VCLK_POST_DIV: 0x0000888b
(II) intel(0): VGACNTRL: 0x2204008e (enabled)
(II) intel(0): TV_CTL: 0x00000000
(II) intel(0): TV_DAC: 0x00000000
(II) intel(0): TV_CSC_Y: 0x00000000
(II) intel(0): TV_CSC_Y2: 0x00000000
(II) intel(0): TV_CSC_U: 0x00000000
(II) intel(0): TV_CSC_U2: 0x00000000
(II) intel(0): TV_CSC_V: 0x00000000
(II) intel(0): TV_CSC_V2: 0x00000000
(II) intel(0): TV_CLR_KNOBS: 0x00000000
(II) intel(0): TV_CLR_LEVEL: 0x00000000
(II) intel(0): TV_H_CTL_1: 0x00000000
(II) intel(0): TV_H_CTL_2: 0x00000000
(II) intel(0): TV_H_CTL_3: 0x00000000
(II) intel(0): TV_V_CTL_1: 0x00000000
(II) intel(0): TV_V_CTL_2: 0x00000000
(II) intel(0): TV_V_CTL_3: 0x00000000
(II) intel(0): TV_V_CTL_4: 0x00000000
(II) intel(0): TV_V_CTL_5: 0x00000000
(II) intel(0): TV_V_CTL_6: 0x00000000
(II) intel(0): TV_V_CTL_7: 0x00000000
(II) intel(0): TV_SC_CTL_1: 0x00000000
(II) intel(0): TV_SC_CTL_2: 0x00000000
(II) intel(0): TV_SC_CTL_3: 0x00000000
(II) intel(0): TV_WIN_POS: 0x00000000
(II) intel(0): TV_WIN_SIZE: 0x00000000
(II) intel(0): TV_FILTER_CTL_1: 0x00000000
(II) intel(0): TV_FILTER_CTL_2: 0x00000000
(II) intel(0): TV_FILTER_CTL_3: 0x00000000
(II) intel(0): TV_CC_CONTROL: 0x00000000
(II) intel(0): TV_CC_DATA: 0x00000000
(II) intel(0): TV_H_LUMA_0: 0x00000000
(II) intel(0): TV_H_LUMA_59: 0x00000000
(II) intel(0): TV_H_CHROMA_0: 0x00000000
(II) intel(0): TV_H_CHROMA_59: 0x00000000
(II) intel(0): FBC_CFB_BASE: 0x00000000
(II) intel(0): FBC_LL_BASE: 0x00000000
(II) intel(0): FBC_CONTROL: 0x00000000
(II) intel(0): FBC_COMMAND: 0x00000000
(II) intel(0): FBC_STATUS: 0x20000000
(II) intel(0): FBC_CONTROL2: 0x00000000
(II) intel(0): FBC_FENCE_OFF: 0x00000000
(II) intel(0): FBC_MOD_NUM: 0x00000000
(II) intel(0): MI_MODE: 0x00000000
(II) intel(0): MI_ARB_STATE: 0x00000000
(II) intel(0): MI_RDRET_STATE: 0x00000000
(II) intel(0): ECOSKPD: 0x00000307
(II) intel(0): DP_B: 0x00000000
(II) intel(0): DPB_AUX_CH_CTL: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA5: 0x00000000
(II) intel(0): DP_C: 0x00000000
(II) intel(0): DPC_AUX_CH_CTL: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA5: 0x00000000
(II) intel(0): DP_D: 0x00000000
(II) intel(0): DPD_AUX_CH_CTL: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA5: 0x00000000
(II) intel(0): FENCE START 0: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 0: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 1: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 1: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 2: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 2: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 3: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 3: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 4: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 4: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 5: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 5: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 6: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 6: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 7: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 7: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 8: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 8: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 9: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 9: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 10: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 10: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 11: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 11: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 12: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 12: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 13: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 13: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 14: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 14: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 15: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 15: 0x00000000 ( 0x00000000 end)
(II) intel(0): pipe A dot 25153 n 2 m1 18 m2 7 p1 13 p2 4
(II) intel(0): pipe B dot 50571 n 2 m1 20 m2 6 p1 2 p2 14
(II) intel(0): DumpRegsEnd
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section External VGA
(**) intel(0): Option "Ignore" "True"
(II) intel(0): Output LVDS using monitor section Internal LCD
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): found backlight control method /sys/class/backlight/asus-laptop
(II) intel(0): I2C bus "DVODDC_D" initialized.
(II) Loading sub module "sil164"
(II) LoadModule: "sil164"
(II) Loading /usr/lib/xorg/modules/drivers//sil164.so
(II) Module sil164: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ch7xxx"
(II) LoadModule: "ch7xxx"
(II) Loading /usr/lib/xorg/modules/drivers//ch7xxx.so
(II) Module ch7xxx: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ivch"
(II) LoadModule: "ivch"
(II) Loading /usr/lib/xorg/modules/drivers//ivch.so
(II) Module ivch: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_B" initialized.
(II) Loading sub module "tfp410"
(II) LoadModule: "tfp410"
(II) Loading /usr/lib/xorg/modules/drivers//tfp410.so
(II) Module tfp410: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_B" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ch7017"
(II) LoadModule: "ch7017"
(II) Loading /usr/lib/xorg/modules/drivers//ch7017.so
(II) Module ch7017: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVODDC_D" removed.
(II) intel(0): Resizable framebuffer: not available (0 2)
(II) intel(0): EDID for output LVDS
(II) intel(0): Not using default mode "1024x768" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1024x768" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1024x768" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1024x768" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) intel(0): Not using default mode "832x624" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) intel(0): Printing probed modes for output LVDS
(II) intel(0): Modeline "1024x600"x60.0 50.40 1024 1032 1165 1344 600 603 609 625 (37.5 kHz)
(II) intel(0): Modeline "800x600"x85.1 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz)
(II) intel(0): Output LVDS connected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS using initial mode 1024x600
(II) intel(0): detected 128 kB GTT.
(II) intel(0): detected 8060 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.2.1
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 50176 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 200700 kB available
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 131072 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(WW) intel(0): xf86AllocateGARTMemory: allocation of 1536 pages failed
(Cannot allocate memory)
(WW) intel(0): Allocation error, framebuffer compression disabled
(WW) intel(0): xf86AllocateGARTMemory: allocation of 10 pages failed
(Cannot allocate memory)
(II) intel(0): Allocating 3072 scanlines for pixmap cache
(II) intel(0): Tiled allocation successful.
(II) intel(0): adjusting plane->pipe mappings to allow for framebuffer compression
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) intel(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Horizontal and Vertical Lines
Setting up tile and stipple cache:
32 128x128 slots
16 256x256 slots
6 512x512 slots
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(WW) intel(0): drmDropMaster failed: Unknown error 4294967295
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x007df000 (pgoffset 2015)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x007e0000 (pgoffset 2016)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x007e4000 (pgoffset 2020)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x007e5000 (pgoffset 2021)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x007e9000 (pgoffset 2025)
(II) intel(0): xf86BindGARTMemory: bind key 5 at 0x00fe9000 (pgoffset 4073)
(II) intel(0): xf86BindGARTMemory: bind key 6 at 0x01000000 (pgoffset 4096)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x0002ffff: xaa scratch (64 kB)
(II) intel(0): 0x007df000: end of stolen memory
(II) intel(0): 0x007df000-0x007dffff: Core cursor (4 kB, 0x000000000b26d000 physical
(II) intel(0): 0x007e0000-0x007e3fff: ARGB cursor (16 kB, 0x000000000e6c4000 physical
(II) intel(0): 0x007e4000-0x007e4fff: Core cursor (4 kB, 0x000000000b157000 physical
(II) intel(0): 0x007e5000-0x007e8fff: ARGB cursor (16 kB, 0x00000000099bc000 physical
(II) intel(0): 0x007e9000-0x00fe8fff: fake bufmgr (8192 kB)
(II) intel(0): 0x00fe9000-0x00fe9fff: overlay registers (4 kB, 0x0000000006c1a000 physical
(II) intel(0): 0x01000000-0x01ffffff: front buffer (16384 kB) X tiled
(II) intel(0): 0x08000000: end of aperture
(WW) intel(0): Chosen PLL clock of 48.0 Mhz more than 2% away from desired 50.4 Mhz
(II) intel(0): Mode for pipe B:
(II) intel(0): Modeline "1024x600"x60.0 50.40 1024 1032 1165 1344 600 603 609 625 (37.5 kHz)
(II) intel(0): chosen: dotclock 48000 vco 1344000 ((m 140, m1 23, m2 13), n 3, (p 28, p1 2, p2 14))
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Mode for pipe A:
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(II) intel(0): chosen: dotclock 31500 vco 1008000 ((m 126, m1 20, m2 14), n 4, (p 32, p1 8, p2 4))
(II) intel(0): Hardware state at EnterVT:
(II) intel(0): DumpRegsBegin
(II) intel(0): CHDECMISC: 0x00000000 (none, ch2 enh disabled, ch1 enh disabled, ch0 enh disabled, flex disabled, ep not present)
(II) intel(0): C0DRB0: 0x00000000 (0x0000)
(II) intel(0): C0DRB1: 0x00000000 (0x0000)
(II) intel(0): C0DRB2: 0x00000000 (0x0000)
(II) intel(0): C0DRB3: 0x00000000 (0x0000)
(II) intel(0): C1DRB0: 0x00000000 (0x0000)
(II) intel(0): C1DRB1: 0x00000000 (0x0000)
(II) intel(0): C1DRB2: 0x00000000 (0x0000)
(II) intel(0): C1DRB3: 0x00000000 (0x0000)
(II) intel(0): C0DRA01: 0x00000000 (0x0000)
(II) intel(0): C0DRA23: 0x00000000 (0x0000)
(II) intel(0): C1DRA01: 0x00000000 (0x0000)
(II) intel(0): C1DRA23: 0x00000000 (0x0000)
(II) intel(0): VCLK_DIVISOR_VGA0: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406 (n = 3, m1 = 20, m2 = 6)
(II) intel(0): VCLK_POST_DIV: 0x0000888b (vga0 p1 = 13, p2 = 4, vga1 p1 = 10, p2 = 4)
(II) intel(0): DPLL_TEST: 0x00000000 (, DPLLA input buffer disabled, DPLLB input buffer disabled)
(II) intel(0): CACHE_MODE_0: 0x00000000
(II) intel(0): D_STATE: 0x0000030f
(II) intel(0): DSPCLK_GATE_D: 0x00000000 (clock gates disabled:)
(II) intel(0): RENCLK_GATE_D1: 0x00000001
(II) intel(0): RENCLK_GATE_D2: 0x00000000
(II) intel(0): SDVOB: 0x00000000 (disabled, pipe A, stall disabled, not detected)
(II) intel(0): SDVOC: 0x00000000 (disabled, pipe A, stall disabled, not detected)
(II) intel(0): SDVOUDI: 0x00000000
(II) intel(0): DSPARB: 0x0001feff
(II) intel(0): DSPFW1: 0x00000000
(II) intel(0): DSPFW2: 0x00000000
(II) intel(0): DSPFW3: 0x00000000
(II) intel(0): ADPA: 0x00001c18 (disabled, pipe A, +hsync, +vsync)
(II) intel(0): LVDS: 0xc0000300 (enabled, pipe B, 18 bit, 1 channel)
(II) intel(0): DVOA: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOB: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOC: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOA_SRCDIM: 0x00000000
(II) intel(0): DVOB_SRCDIM: 0x00000000
(II) intel(0): DVOC_SRCDIM: 0x00000000
(II) intel(0): PP_CONTROL: 0x00000001 (power target: on)
(II) intel(0): PP_STATUS: 0xd000000a (on, ready, sequencing on)
(II) intel(0): PP_ON_DELAYS: 0x019007d0
(II) intel(0): PP_OFF_DELAYS: 0x01f407d0
(II) intel(0): PP_DIVISOR: 0x00270f04
(II) intel(0): PFIT_CONTROL: 0x00000008
(II) intel(0): PFIT_PGM_RATIOS: 0x00000000
(II) intel(0): PORT_HOTPLUG_EN: 0x00000000
(II) intel(0): PORT_HOTPLUG_STAT: 0x00000000
(II) intel(0): DSPACNTR: 0xd9000000 (enabled, pipe B)
(II) intel(0): DSPASTRIDE: 0x00001000 (4096 bytes)
(II) intel(0): DSPAPOS: 0x00000000 (0, 0)
(II) intel(0): DSPASIZE: 0x025703ff (1024, 600)
(II) intel(0): DSPABASE: 0x01000000
(II) intel(0): DSPASURF: 0x00000000
(II) intel(0): DSPATILEOFF: 0x00000000
(II) intel(0): PIPEACONF: 0x80000000 (enabled, single-wide)
(II) intel(0): PIPEASRC: 0x027f01df (640, 480)
(II) intel(0): PIPEASTAT: 0x80000207 (status: FIFO_UNDERRUN VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS)
(II) intel(0): FPA0: 0x0004140e (n = 4, m1 = 20, m2 = 14)
(II) intel(0): FPA1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): DPLL_A: 0x90860000 (enabled, non-dvo, default clock, DAC/serial mode, p1 = 8, p2 = 4)
(II) intel(0): DPLL_A_MD: 0x00000000
(II) intel(0): HTOTAL_A: 0x033f027f (640 active, 832 total)
(II) intel(0): HBLANK_A: 0x033f027f (640 start, 832 end)
(II) intel(0): HSYNC_A: 0x02bf0297 (664 start, 704 end)
(II) intel(0): VTOTAL_A: 0x020701df (480 active, 520 total)
(II) intel(0): VBLANK_A: 0x020701df (480 start, 520 end)
(II) intel(0): VSYNC_A: 0x01ea01e8 (489 start, 491 end)
(II) intel(0): BCLRPAT_A: 0x00000000
(II) intel(0): VSYNCSHIFT_A: 0x00000000
(II) intel(0): DSPBCNTR: 0x58000000 (disabled, pipe A)
(II) intel(0): DSPBSTRIDE: 0x00001000 (4096 bytes)
(II) intel(0): DSPBPOS: 0x00000000 (0, 0)
(II) intel(0): DSPBSIZE: 0x01df027f (640, 480)
(II) intel(0): DSPBBASE: 0x01000000
(II) intel(0): DSPBSURF: 0x00000000
(II) intel(0): DSPBTILEOFF: 0x00000000
(II) intel(0): PIPEBCONF: 0x80000000 (enabled, single-wide)
(II) intel(0): PIPEBSRC: 0x03ff0257 (1024, 600)
(II) intel(0): PIPEBSTAT: 0x80000202 (status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS)
(II) intel(0): FPB0: 0x0003170d (n = 3, m1 = 23, m2 = 13)
(II) intel(0): FPB1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): DPLL_B: 0x90020000 (enabled, non-dvo, default clock, LVDS mode, p1 = 2, p2 = 14)
(II) intel(0): DPLL_B_MD: 0x00000000
(II) intel(0): HTOTAL_B: 0x053f03ff (1024 active, 1344 total)
(II) intel(0): HBLANK_B: 0x053f03ff (1024 start, 1344 end)
(II) intel(0): HSYNC_B: 0x048c0407 (1032 start, 1165 end)
(II) intel(0): VTOTAL_B: 0x02700257 (600 active, 625 total)
(II) intel(0): VBLANK_B: 0x02700257 (600 start, 625 end)
(II) intel(0): VSYNC_B: 0x0260025a (603 start, 609 end)
(II) intel(0): BCLRPAT_B: 0x00000000
(II) intel(0): VSYNCSHIFT_B: 0x00000000
(II) intel(0): VCLK_DIVISOR_VGA0: 0x00021207
(II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406
(II) intel(0): VCLK_POST_DIV: 0x0000888b
(II) intel(0): VGACNTRL: 0xa204008e (disabled)
(II) intel(0): TV_CTL: 0x00000000
(II) intel(0): TV_DAC: 0x00000000
(II) intel(0): TV_CSC_Y: 0x00000000
(II) intel(0): TV_CSC_Y2: 0x00000000
(II) intel(0): TV_CSC_U: 0x00000000
(II) intel(0): TV_CSC_U2: 0x00000000
(II) intel(0): TV_CSC_V: 0x00000000
(II) intel(0): TV_CSC_V2: 0x00000000
(II) intel(0): TV_CLR_KNOBS: 0x00000000
(II) intel(0): TV_CLR_LEVEL: 0x00000000
(II) intel(0): TV_H_CTL_1: 0x00000000
(II) intel(0): TV_H_CTL_2: 0x00000000
(II) intel(0): TV_H_CTL_3: 0x00000000
(II) intel(0): TV_V_CTL_1: 0x00000000
(II) intel(0): TV_V_CTL_2: 0x00000000
(II) intel(0): TV_V_CTL_3: 0x00000000
(II) intel(0): TV_V_CTL_4: 0x00000000
(II) intel(0): TV_V_CTL_5: 0x00000000
(II) intel(0): TV_V_CTL_6: 0x00000000
(II) intel(0): TV_V_CTL_7: 0x00000000
(II) intel(0): TV_SC_CTL_1: 0x00000000
(II) intel(0): TV_SC_CTL_2: 0x00000000
(II) intel(0): TV_SC_CTL_3: 0x00000000
(II) intel(0): TV_WIN_POS: 0x00000000
(II) intel(0): TV_WIN_SIZE: 0x00000000
(II) intel(0): TV_FILTER_CTL_1: 0x00000000
(II) intel(0): TV_FILTER_CTL_2: 0x00000000
(II) intel(0): TV_FILTER_CTL_3: 0x00000000
(II) intel(0): TV_CC_CONTROL: 0x00000000
(II) intel(0): TV_CC_DATA: 0x00000000
(II) intel(0): TV_H_LUMA_0: 0x00000000
(II) intel(0): TV_H_LUMA_59: 0x00000000
(II) intel(0): TV_H_CHROMA_0: 0x00000000
(II) intel(0): TV_H_CHROMA_59: 0x00000000
(II) intel(0): FBC_CFB_BASE: 0x00000000
(II) intel(0): FBC_LL_BASE: 0x00000000
(II) intel(0): FBC_CONTROL: 0x00000000
(II) intel(0): FBC_COMMAND: 0x00000000
(II) intel(0): FBC_STATUS: 0x20000000
(II) intel(0): FBC_CONTROL2: 0x00000000
(II) intel(0): FBC_FENCE_OFF: 0x00000000
(II) intel(0): FBC_MOD_NUM: 0x00000000
(II) intel(0): MI_MODE: 0x00000000
(II) intel(0): MI_ARB_STATE: 0x00000000
(II) intel(0): MI_RDRET_STATE: 0x00000000
(II) intel(0): ECOSKPD: 0x00000307
(II) intel(0): DP_B: 0x00000000
(II) intel(0): DPB_AUX_CH_CTL: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA5: 0x00000000
(II) intel(0): DP_C: 0x00000000
(II) intel(0): DPC_AUX_CH_CTL: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA5: 0x00000000
(II) intel(0): DP_D: 0x00000000
(II) intel(0): DPD_AUX_CH_CTL: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA5: 0x00000000
(II) intel(0): FENCE START 0: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 0: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 1: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 1: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 2: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 2: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 3: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 3: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 4: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 4: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 5: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 5: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 6: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 6: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 7: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 7: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 8: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 8: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 9: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 9: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 10: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 10: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 11: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 11: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 12: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 12: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 13: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 13: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 14: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 14: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 15: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 15: 0x00000000 ( 0x00000000 end)
(II) intel(0): pipe A dot 31500 n 4 m1 20 m2 14 p1 8 p2 4
(II) intel(0): pipe B dot 48000 n 3 m1 23 m2 13 p1 2 p2 14
(II) intel(0): DumpRegsEnd
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane B is now disabled and connected to pipe A.
(WW) intel(0): Hardware claims pipe A is on while software believes it is off
(II) intel(0): Pipe B is on
(II) intel(0): Display plane A is now enabled and connected to pipe B.
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: Disabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) intel(0): Setting screen physical size to 270 x 158
(II) config/hal: Adding input device TPPS/2 IBM TrackPoint
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 2.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) TPPS/2 IBM TrackPoint: always reports core events
(**) TPPS/2 IBM TrackPoint: Device: "/dev/input/event8"
(II) TPPS/2 IBM TrackPoint: Found 3 mouse buttons
(II) TPPS/2 IBM TrackPoint: Found x and y relative axes
(II) TPPS/2 IBM TrackPoint: Configuring as mouse
(**) TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
(**) TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE)
(**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
(**) TPPS/2 IBM TrackPoint: (accel) filter chain progression: 2.00
(**) TPPS/2 IBM TrackPoint: (accel) filter stage 0: 20.00 ms
(**) TPPS/2 IBM TrackPoint: (accel) set acceleration profile 0
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device Asus Laptop extra buttons
(**) Asus Laptop extra buttons: always reports core events
(**) Asus Laptop extra buttons: Device: "/dev/input/event5"
(II) Asus Laptop extra buttons: Found 1 mouse buttons
(II) Asus Laptop extra buttons: Found keys
(II) Asus Laptop extra buttons: Configuring as keyboard
(**) Asus Laptop extra buttons: YAxisMapping: buttons 4 and 5
(**) Asus Laptop extra buttons: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Asus Laptop extra buttons" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event6"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) TPPS/2 IBM TrackPoint: Close
(II) UnloadModule: "evdev"
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
(II) Asus Laptop extra buttons: Close
(II) UnloadModule: "evdev"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) Video Bus: Close
(II) UnloadModule: "evdev"
(II) intel(0): Comparing regs from server start up to After LeaveVT
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(II) intel(0): DumpRegsBegin
(II) intel(0): CHDECMISC: 0x00000000 (none, ch2 enh disabled, ch1 enh disabled, ch0 enh disabled, flex disabled, ep not present)
(II) intel(0): C0DRB0: 0x00000000 (0x0000)
(II) intel(0): C0DRB1: 0x00000000 (0x0000)
(II) intel(0): C0DRB2: 0x00000000 (0x0000)
(II) intel(0): C0DRB3: 0x00000000 (0x0000)
(II) intel(0): C1DRB0: 0x00000000 (0x0000)
(II) intel(0): C1DRB1: 0x00000000 (0x0000)
(II) intel(0): C1DRB2: 0x00000000 (0x0000)
(II) intel(0): C1DRB3: 0x00000000 (0x0000)
(II) intel(0): C0DRA01: 0x00000000 (0x0000)
(II) intel(0): C0DRA23: 0x00000000 (0x0000)
(II) intel(0): C1DRA01: 0x00000000 (0x0000)
(II) intel(0): C1DRA23: 0x00000000 (0x0000)
(II) intel(0): VCLK_DIVISOR_VGA0: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406 (n = 3, m1 = 20, m2 = 6)
(II) intel(0): VCLK_POST_DIV: 0x0000888b (vga0 p1 = 13, p2 = 4, vga1 p1 = 10, p2 = 4)
(II) intel(0): DPLL_TEST: 0x00000000 (, DPLLA input buffer disabled, DPLLB input buffer disabled)
(II) intel(0): CACHE_MODE_0: 0x00000000
(II) intel(0): D_STATE: 0x0000030f
(II) intel(0): DSPCLK_GATE_D: 0x00000000 (clock gates disabled:)
(II) intel(0): RENCLK_GATE_D1: 0x00000000
(II) intel(0): RENCLK_GATE_D2: 0x00000000
(II) intel(0): SDVOB: 0x00000000 (disabled, pipe A, stall disabled, not detected)
(II) intel(0): SDVOC: 0x00000000 (disabled, pipe A, stall disabled, not detected)
(II) intel(0): SDVOUDI: 0x00000000
(II) intel(0): DSPARB: 0x00015455
(II) intel(0): DSPFW1: 0x00000000
(II) intel(0): DSPFW2: 0x00000000
(II) intel(0): DSPFW3: 0x00000000
(II) intel(0): ADPA: 0x00001c18 (disabled, pipe A, +hsync, +vsync)
(II) intel(0): LVDS: 0xc0000300 (enabled, pipe B, 18 bit, 1 channel)
(II) intel(0): DVOA: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOB: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOC: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOA_SRCDIM: 0x00000000
(II) intel(0): DVOB_SRCDIM: 0x00000000
(II) intel(0): DVOC_SRCDIM: 0x00000000
(II) intel(0): PP_CONTROL: 0x00000001 (power target: on)
(II) intel(0): PP_STATUS: 0xd000000a (on, ready, sequencing on)
(II) intel(0): PP_ON_DELAYS: 0x019007d0
(II) intel(0): PP_OFF_DELAYS: 0x01f407d0
(II) intel(0): PP_DIVISOR: 0x00270f04
(II) intel(0): PFIT_CONTROL: 0x80000668
(II) intel(0): PFIT_PGM_RATIOS: 0x00000000
(II) intel(0): PORT_HOTPLUG_EN: 0x00000000
(II) intel(0): PORT_HOTPLUG_STAT: 0x00000000
(II) intel(0): DSPACNTR: 0x00000000 (disabled, pipe A)
(II) intel(0): DSPASTRIDE: 0x00000000 (0 bytes)
(II) intel(0): DSPAPOS: 0x00000000 (0, 0)
(II) intel(0): DSPASIZE: 0x00000000 (1, 1)
(II) intel(0): DSPABASE: 0x00000000
(II) intel(0): DSPASURF: 0x00000000
(II) intel(0): DSPATILEOFF: 0x00000000
(II) intel(0): PIPEACONF: 0x80000000 (enabled, single-wide)
(II) intel(0): PIPEASRC: 0x027f01df (640, 480)
(II) intel(0): PIPEASTAT: 0x80000207 (status: FIFO_UNDERRUN VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS)
(II) intel(0): FPA0: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): FPA1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): DPLL_A: 0x808b0000 (enabled, non-dvo, VGA, default clock, DAC/serial mode, p1 = 13, p2 = 4)
(II) intel(0): DPLL_A_MD: 0x00000000
(II) intel(0): HTOTAL_A: 0x031f027f (640 active, 800 total)
(II) intel(0): HBLANK_A: 0x03170287 (648 start, 792 end)
(II) intel(0): HSYNC_A: 0x02ef028f (656 start, 752 end)
(II) intel(0): VTOTAL_A: 0x020c01df (480 active, 525 total)
(II) intel(0): VBLANK_A: 0x020401e7 (488 start, 517 end)
(II) intel(0): VSYNC_A: 0x01eb01e9 (490 start, 492 end)
(II) intel(0): BCLRPAT_A: 0x00000000
(II) intel(0): VSYNCSHIFT_A: 0x00000000
(II) intel(0): DSPBCNTR: 0x49000000 (disabled, pipe B)
(II) intel(0): DSPBSTRIDE: 0x00000280 (640 bytes)
(II) intel(0): DSPBPOS: 0x00000000 (0, 0)
(II) intel(0): DSPBSIZE: 0x01df027f (640, 480)
(II) intel(0): DSPBBASE: 0x00000000
(II) intel(0): DSPBSURF: 0x00000000
(II) intel(0): DSPBTILEOFF: 0x00000000
(II) intel(0): PIPEBCONF: 0x80000000 (enabled, single-wide)
(II) intel(0): PIPEBSRC: 0x027f018f (640, 400)
(II) intel(0): PIPEBSTAT: 0x80000202 (status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS)
(II) intel(0): FPB0: 0x00021406 (n = 2, m1 = 20, m2 = 6)
(II) intel(0): FPB1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): DPLL_B: 0x90020000 (enabled, non-dvo, default clock, LVDS mode, p1 = 2, p2 = 14)
(II) intel(0): DPLL_B_MD: 0x00000000
(II) intel(0): HTOTAL_B: 0x053f03ff (1024 active, 1344 total)
(II) intel(0): HBLANK_B: 0x053f03ff (1024 start, 1344 end)
(II) intel(0): HSYNC_B: 0x048c0407 (1032 start, 1165 end)
(II) intel(0): VTOTAL_B: 0x02700257 (600 active, 625 total)
(II) intel(0): VBLANK_B: 0x02700257 (600 start, 625 end)
(II) intel(0): VSYNC_B: 0x0260025a (603 start, 609 end)
(II) intel(0): BCLRPAT_B: 0x00000000
(II) intel(0): VSYNCSHIFT_B: 0x00000000
(II) intel(0): VCLK_DIVISOR_VGA0: 0x00021207
(II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406
(II) intel(0): VCLK_POST_DIV: 0x0000888b
(II) intel(0): VGACNTRL: 0x2204008e (enabled)
(II) intel(0): TV_CTL: 0x00000000
(II) intel(0): TV_DAC: 0x00000000
(II) intel(0): TV_CSC_Y: 0x00000000
(II) intel(0): TV_CSC_Y2: 0x00000000
(II) intel(0): TV_CSC_U: 0x00000000
(II) intel(0): TV_CSC_U2: 0x00000000
(II) intel(0): TV_CSC_V: 0x00000000
(II) intel(0): TV_CSC_V2: 0x00000000
(II) intel(0): TV_CLR_KNOBS: 0x00000000
(II) intel(0): TV_CLR_LEVEL: 0x00000000
(II) intel(0): TV_H_CTL_1: 0x00000000
(II) intel(0): TV_H_CTL_2: 0x00000000
(II) intel(0): TV_H_CTL_3: 0x00000000
(II) intel(0): TV_V_CTL_1: 0x00000000
(II) intel(0): TV_V_CTL_2: 0x00000000
(II) intel(0): TV_V_CTL_3: 0x00000000
(II) intel(0): TV_V_CTL_4: 0x00000000
(II) intel(0): TV_V_CTL_5: 0x00000000
(II) intel(0): TV_V_CTL_6: 0x00000000
(II) intel(0): TV_V_CTL_7: 0x00000000
(II) intel(0): TV_SC_CTL_1: 0x00000000
(II) intel(0): TV_SC_CTL_2: 0x00000000
(II) intel(0): TV_SC_CTL_3: 0x00000000
(II) intel(0): TV_WIN_POS: 0x00000000
(II) intel(0): TV_WIN_SIZE: 0x00000000
(II) intel(0): TV_FILTER_CTL_1: 0x00000000
(II) intel(0): TV_FILTER_CTL_2: 0x00000000
(II) intel(0): TV_FILTER_CTL_3: 0x00000000
(II) intel(0): TV_CC_CONTROL: 0x00000000
(II) intel(0): TV_CC_DATA: 0x00000000
(II) intel(0): TV_H_LUMA_0: 0x00000000
(II) intel(0): TV_H_LUMA_59: 0x00000000
(II) intel(0): TV_H_CHROMA_0: 0x00000000
(II) intel(0): TV_H_CHROMA_59: 0x00000000
(II) intel(0): FBC_CFB_BASE: 0x00000000
(II) intel(0): FBC_LL_BASE: 0x00000000
(II) intel(0): FBC_CONTROL: 0x00000000
(II) intel(0): FBC_COMMAND: 0x00000000
(II) intel(0): FBC_STATUS: 0x20000000
(II) intel(0): FBC_CONTROL2: 0x00000000
(II) intel(0): FBC_FENCE_OFF: 0x00000000
(II) intel(0): FBC_MOD_NUM: 0x00000000
(II) intel(0): MI_MODE: 0x00000000
(II) intel(0): MI_ARB_STATE: 0x00000000
(II) intel(0): MI_RDRET_STATE: 0x00000000
(II) intel(0): ECOSKPD: 0x00000307
(II) intel(0): DP_B: 0x00000000
(II) intel(0): DPB_AUX_CH_CTL: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA5: 0x00000000
(II) intel(0): DP_C: 0x00000000
(II) intel(0): DPC_AUX_CH_CTL: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA5: 0x00000000
(II) intel(0): DP_D: 0x00000000
(II) intel(0): DPD_AUX_CH_CTL: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA5: 0x00000000
(II) intel(0): FENCE START 0: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 0: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 1: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 1: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 2: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 2: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 3: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 3: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 4: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 4: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 5: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 5: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 6: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 6: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 7: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 7: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 8: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 8: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 9: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 9: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 10: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 10: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 11: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 11: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 12: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 12: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 13: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 13: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 14: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 14: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 15: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 15: 0x00000000 ( 0x00000000 end)
(II) intel(0): pipe A dot 25153 n 2 m1 18 m2 7 p1 13 p2 4
(II) intel(0): pipe B dot 50571 n 2 m1 20 m2 6 p1 2 p2 14
(II) intel(0): DumpRegsEnd
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) intel(0): xf86UnbindGARTMemory: unbind key 1
(II) intel(0): xf86UnbindGARTMemory: unbind key 2
(II) intel(0): xf86UnbindGARTMemory: unbind key 3
(II) intel(0): xf86UnbindGARTMemory: unbind key 4
(II) intel(0): xf86UnbindGARTMemory: unbind key 5
(II) intel(0): xf86UnbindGARTMemory: unbind key 6
(WW) intel(0): drmDropMaster failed: Unknown error 4294967295 -
Black Screen before installing windows 7. Lets solve once and for all.
I have a late 2008 macbook pro and have been trying to install windows 7 through boot camp for a number of days now. I have read every forum on the internet and have tried every popular solution (i.e. resetting pram, smc, unplugging, changing screen resolution, etc.) and nothing has worked. I know there are many other people with this problem but none of them have solutions. I had windows 7 installed a few months ago but it stopped working and I had to delete it. Just yesterday I reinstalled Snow Leopard and still nothing. I created the partition and tried to install windows but it just goes to the blinking cursor for one second, then a black screen. I have tried everything possible and nothing works.
Please lets try to get this problem solved because out of every single forum on the internet, none of them have solved this problem.I think after weeks of searching I have finally narrowed it down, based on what I have read, to a disk drive problem. It seems to be something wrong with the EFI or the entire disk drive in general. I am taking it to the apple store tomorrow and I highly doubt they will do anything.
-
Ok....so i've posted this question in a different way, and i gotten several "scratch the surface" answers from people just saying to install "Ati catalyst", or insert the os x dvd and run set up.exe, and update to boot camp 3.1 or 3.2...while these all seem like great suggestions, I am finding myself needing more specific direction or "hand holding" so to speak.....here is the MAIN problem...
The Background/history
I used boot camp (3.0, and i found updates for 3.1 for imac and for windows, but can't find for mac pro, AND they all are ".exe" files which run on windows..which as you'll see is the big part of my problem...So I recently updated my mac pro (with the ATI Radeon HD2600 graphic PCIe card with 10.6.7 from 10.5.8. I created a single partitioned drive to install windows 7 professional 64 bit. The download software function didn't work (Thanks, APPLE for that poor level of support) so have to select the option that i have already downloaded, or have other media with the drivers already on it....i restarted with the windows 7 disk in....
The installation of Windows 7 Pro 64-bit
So the installation of windows 7 seemed to go flawlessly, was able to use my existing 23" hd apple cinema display (so somehow it has drivers that work with the graphics card, or maybe the motherboard's on board video components) and i select english, and install now, custom, blah, blah, blah...installation causes a few reboots, then restarts ultimately back in os x since that is the default boot os i use on this desk top and have to do the "opt" button to select booting in windows....so when i try restarting in windows, now using the actual boot drive on which i am installing it, it ran through another reboot or two, but then after that, my display goes black.... in the communities, the solution sounds super simple... "go download the ATI catalyst for the black screen problem....windows 7 doesn't have device drivers that work with the ATI radeon hd2600...no problem, just go download and install...."
The problem, re-emphasized : I cannot even finish the install for windows, because of this driver problem....i cannot see anything....I have tried to reboot in safe mode, and that then seems to invoke whatever basic drivers that do work, likely through the motherboards onboard video vs the actual graphic card, and the screen works and says that it's wanting to complete the installation, so i'm thinking awesome this is gonna work....and then.. "windows installation was not completed and cannot be completed in SAFE MODE, need to restart, blah, blah, blah" pops up...and forces reboot...so Safe Mode allows me to see, but won't allow me to finish the install of windows 7...and without completing the install i can't run (ranther I DONT KNOW HOW TO) any of the various .exe files everyone is telling me are the solutions to my problem...like update 3.1 and 3.2 bootcamp...they're all .exe files? not sure why, because bootcamp runs in 10.6.7 i thought, but whatever...it needs running Windows to execute...then the ATI radeon hd2600 driver for windows 7 that i downloaded from the site has an installation program that is an .exe file, which needs windows to run... Does this make sense, why i can't just use these fixes, that seem to be the only fixes out there....so can someone school me step by step here (not just the highlights) of how to update bootcamp, and how to install the ati radeon driver without having been able to complete the windows 7 installation because the monitor goes and stays black????
This is so very frustrating for the record...and any substantial help "not just go download this..." would be immensely appreciated.
Some other things i've been told to try that i've tried and nothing seems to happen as i'm told it will....
---I've been told to install the osx dvd and run "setup.exe" - AGAIN...it's an exe file...and 2 - when i put in the os x file it just wants to re install 10.6...so need more help if this is even a real solution to understand how to make it work...
---I've been told to update boot camp to 3.1 and/or 3.2 from 3.0, using Apple Software Update....Well, my software update is saying everything is up to date and there is nothing new to download at all, and when i reverify the bootcamp version it is still only 3.0.2...and again downloading the updates from www.apple.com/support/ for 3.1 and 3.2...all of those are .exe files...need windows to run them...again, refer to the problem described in detail above...
---I've been referred to the black screen on imac early 2011 thread saying it should fix my problem...and reading it it SEEMED like the most promising resolution...it involves creating a boot flash drive for windows 7 and an xml file that sets the imac drivers to auto install during the windows installation..and it got me farther than anything else..but still ultimately ended up in the darned black screen...my assumption is that it's because it's for imac and not mac pro so not ati-radeon specific drivers....ok....that's enough..please...anyone who thinks they can help...your help is desperately needed...thanks so much in advance!hey Hatter, thanks so much for getting back...so just to be super clear...is there no way to install the drivers using an exe file given my current state? no way to do it with command prompt or something? if can make work with existing card, i'd prefer it...now when you say it's 'toast' how do you mean? it works well with the os x partitions and always has...so i'm not sure i follow, just want to be clear...
Now to your point of starting with only the one drive installed...so i would put that bootcamp drive in bay 1 and disconnect the rest...i'm not totally sure what you're suggesting the effect should be of doing this? just that i'm just installing windows without the bootcamp deal...but if windows 7 doesn't support the ati radeon hd2600, it still will go black screen no? or you're saying it will run video through the motherboard if it's the only bootdrive, and will run all the way through the windows install without trying to switch over to the hd2600? (slrry flr these questions..just really want to make sure i understand what you're telling me..thanks so much for your patience and help by the way...it's very greatly appreciated...your support is priceless!
So now, assuming none of the above is possible...referring now to the ati 5770 that you referred to...you mention it works with 10.6 well, and that windows 7 supports it ...2 questions on that
1) Windows 7 supports" meaning, out of the box windows 7 supports it? or will i have to install drivers still through some update, because again, if that's how i have to do it, then won't work, cuz can't start windows to see anything to install any drivers or run any thing at all...so it would have to just work with initial installation.
2)hardware wise for my Mac Pro 3,1...intel dual quad core xeon, blah blah....will this card work? it's a PCIe and should fit on my board no prob, etc? -
Installed the update tonight and now my phone (Lumia 928) won't power up. I've tried a soft reset, but the screen goes from the Nokia logo to a red Verizon screen to a black screen. Tried it 10 times with the same result. What's wrong and how do I fix it? Help!
Oh no Mr.Ected!
I can see if we can get your phone back on! I understand how important it is to have a phone. Have you tried this to see if we can get it back on? http://vz.to/1DZhteH . If it is still goes to a red Verizon screen and then to black we might need to do a master reset. While the phone is off try this:http://vz.to/1DZhXkU Be mindful this is the last resort because it will erase everything on the phone. If you have done back up assistant in the past you will be able to get you contacts back. Please let me know if you need any more help.
AmberF_VZW
Follow us on Twitter @VZWSupport -
Recently loaded Lion on my laptop and now my computer crashes often. Black screen and keyboard lights up. Any ideas on what's wrong and how to fix this?
Everytime this happens Ihave to power down and restart! Any ideas would be appreciated!
-
Media encoder CC all black screen
Hello,
1 week ago my media encoder CC started having an all black screen when opened. There are no buttons no tekst. The only thing you see is the top bar.
I have reinstalled Media encoder, installed the latest version. But it still has a black screen
I dont know what to do anymore.
My cache folder had been emptyd a while ago. I dont know if this has anything to do with it?
All my other Adobe CC programs work perfectly. Photoshop, after effects, premiere etc.
Could you please give me support.
Thank you,
JamesAsk in the AME/ Premiere forum and by all means provide some solid technical info - system specs, sequence settings, render settings, footage used. Nobody can help you without that.
Mylenium -
Can't fix fglrx/Xorg black screen issue, no matter what I try!
I've tried everything that I can think of or find online to fix this. Please help.
I'm getting what seems to be an oft-recurring issue where Xorg simply won't start when using the fglrx driver. It boots fine with VESA or Xfree86-ati, but using fglrx I just get a black screen that won't accept any input, although ssh'ing into the box while this is happening still works.
I've been reading forum posts for *days* now trying to get this to work. I've tried every combination of 12.4/12.6 drivers, Xorg 1.11/1.12 and modeset/nomodeset kernel parameters. I definitely do not have any radeon or other DRI modules compiled into my kernel. I have an HD4200, SLiM/Xfce4, and I'm using the proper catalyst-hd234k package. The fglrx module has been compiled for my kernel and added to my initramfs, and it loads at boot. lsmod reveals its presence and does *not* show 'radeon'. I have uninstalled every video driver aside from fglrx and Xfree86-vesa. Output does not seem to be going to HDMI instead. Switching consoles/typing blindly does not work, and I need to hold the power button for 5 seconds to shutdown. I've run aticonfig --initial and tried aticonfig --acpi-services=off, too.
I've tried *all* the different tweaks that I've found to try to make a working xorg.conf, but here's what I'm trying to use now:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "aticonfig-Screen[0]-0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
#Section "Module"
# Load "extmod"
# Load "dri"
# Load "glx"
# Load "dri2"
# Load "record"
# Load "dbe"
#EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:5:0"
Option "EXAPixmaps" "off"
Option "XAANoOffScreenPixmaps" "true"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1024x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1680x1050" "1440x900" "1366x768"
EndSubSection
EndSection
My Xorg log seems fantastically uninformative, since it seems to show the fglrx module loading and does not report any errors:
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 19.388] X Protocol Version 11, Revision 0
[ 19.388] Build Operating System: Linux 3.4.8-1-ARCH x86_64
[ 19.388] Current Operating System: Linux splice 3.5.3-1-ARCH #1 SMP PREEMPT Tue Sep 18 00:11:37 EDT 2012 x86_64
[ 19.388] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=228ebc5f-ada6-4d9c-9e93-fc645085e5cd ro quiet nomodeset resume=/dev/sda5 init=/bin/systemd
[ 19.389] Build Date: 27 August 2012 08:04:39AM
[ 19.389]
[ 19.389] Current version of pixman: 0.26.2
[ 19.389] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 19.389] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 19.389] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Sep 18 07:02:13 2012
[ 19.496] (==) Using config file: "/etc/X11/xorg.conf"
[ 19.496] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 19.769] (==) ServerLayout "X.org Configured"
[ 19.769] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 19.769] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 19.790] (**) | |-->Device "aticonfig-Device[0]-0"
[ 19.790] (**) |-->Input Device "Mouse0"
[ 19.790] (**) |-->Input Device "Keyboard0"
[ 19.790] (==) Automatically adding devices
[ 19.790] (==) Automatically enabling devices
[ 19.993] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 19.993] Entry deleted from font path.
[ 20.193] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 20.193] Entry deleted from font path.
[ 20.193] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 20.195] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 20.196] Entry deleted from font path.
[ 20.196] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 20.196] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 20.196] Entry deleted from font path.
[ 20.196] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 20.196] Entry deleted from font path.
[ 20.196] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 20.196] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 20.196] Entry deleted from font path.
[ 20.196] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 20.196] (**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 20.196] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 20.196] (**) Extension "Composite" is disabled
[ 20.196] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 20.196] (WW) Disabling Mouse0
[ 20.196] (WW) Disabling Keyboard0
[ 20.196] (II) Loader magic: 0x7c8b00
[ 20.196] (II) Module ABI versions:
[ 20.196] X.Org ANSI C Emulation: 0.4
[ 20.196] X.Org Video Driver: 12.1
[ 20.196] X.Org XInput driver : 16.0
[ 20.196] X.Org Server Extension : 6.0
[ 20.198] (--) PCI:*(0:1:5:0) 1002:9712:17aa:21b8 rev 0, Mem @ 0xc0000000/268435456, 0xd0400000/65536, 0xd0300000/1048576, I/O @ 0x00009000/256
[ 20.198] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 20.198] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[ 20.198] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[ 20.198] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 20.198] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
[ 20.198] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
[ 20.198] (II) "dri2" will be loaded by default.
[ 20.198] (II) LoadModule: "extmod"
[ 20.439] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 20.468] (II) Module extmod: vendor="X.Org Foundation"
[ 20.468] compiled for 1.12.4, module version = 1.0.0
[ 20.468] Module class: X.Org Server Extension
[ 20.468] ABI class: X.Org Server Extension, version 6.0
[ 20.468] (II) Loading extension MIT-SCREEN-SAVER
[ 20.468] (II) Loading extension XFree86-VidModeExtension
[ 20.468] (II) Loading extension XFree86-DGA
[ 20.468] (II) Loading extension DPMS
[ 20.468] (II) Loading extension XVideo
[ 20.468] (II) Loading extension XVideo-MotionCompensation
[ 20.468] (II) Loading extension X-Resource
[ 20.468] (II) LoadModule: "dri"
[ 20.468] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 20.545] (II) Module dri: vendor="X.Org Foundation"
[ 20.545] compiled for 1.12.4, module version = 1.0.0
[ 20.545] ABI class: X.Org Server Extension, version 6.0
[ 20.545] (II) Loading extension XFree86-DRI
[ 20.545] (II) LoadModule: "glx"
[ 20.554] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 20.685] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 20.685] compiled for 6.9.0, module version = 1.0.0
[ 20.685] (II) Loading extension GLX
[ 20.685] (II) LoadModule: "dri"
[ 20.685] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 20.686] (II) Module dri: vendor="X.Org Foundation"
[ 20.686] compiled for 1.12.4, module version = 1.0.0
[ 20.686] ABI class: X.Org Server Extension, version 6.0
[ 20.686] (II) LoadModule: "record"
[ 20.686] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 20.716] (II) Module record: vendor="X.Org Foundation"
[ 20.716] compiled for 1.12.4, module version = 1.13.0
[ 20.716] Module class: X.Org Server Extension
[ 20.716] ABI class: X.Org Server Extension, version 6.0
[ 20.716] (II) Loading extension RECORD
[ 20.716] (II) LoadModule: "dbe"
[ 20.717] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 20.742] (II) Module dbe: vendor="X.Org Foundation"
[ 20.742] compiled for 1.12.4, module version = 1.0.0
[ 20.743] Module class: X.Org Server Extension
[ 20.743] ABI class: X.Org Server Extension, version 6.0
[ 20.743] (II) Loading extension DOUBLE-BUFFER
[ 20.743] (II) LoadModule: "dri2"
[ 20.743] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 20.811] (II) Module dri2: vendor="X.Org Foundation"
[ 20.811] compiled for 1.12.4, module version = 1.2.0
[ 20.811] ABI class: X.Org Server Extension, version 6.0
[ 20.811] (II) Loading extension DRI2
[ 20.811] (II) LoadModule: "fglrx"
[ 20.811] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 22.869] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[ 22.869] compiled for 1.4.99.906, module version = 8.97.2
[ 22.869] Module class: X.Org Video Driver
[ 22.871] (II) Loading sub module "fglrxdrm"
[ 22.871] (II) LoadModule: "fglrxdrm"
[ 22.871] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 22.979] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 22.979] compiled for 1.4.99.906, module version = 8.97.2
[ 22.979] (II) ATI Proprietary Linux Driver Version Identifier:8.97.2
[ 22.979] (II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.97.100.3
[ 22.979] (II) ATI Proprietary Linux Driver Build Date: Jul 3 2012 23:56:30
[ 22.979] (++) using VT number 7
[ 23.041] (WW) Falling back to old probe method for fglrx
[ 23.355] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 23.449] (--) Chipset Supported AMD Graphics Processor (0x9712) found
[ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
[ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
[ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
[ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
[ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
[ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
[ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
[ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
[ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
[ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:0) found
[ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:2) found
[ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:5:1) found
[ 23.465] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 23.477] (II) AMD Video driver is signed
[ 23.478] (II) fglrx(0): pEnt->device->identifier=0x1cdc440
[ 23.478] (II) fglrx(0): === [xdl_xs112_atiddxPreInit] === begin
[ 23.478] (II) Loading sub module "vgahw"
[ 23.478] (II) LoadModule: "vgahw"
[ 23.478] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 23.488] (II) Module vgahw: vendor="X.Org Foundation"
[ 23.488] compiled for 1.12.4, module version = 0.1.0
[ 23.488] ABI class: X.Org Video Driver, version 12.1
[ 23.489] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 23.489] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 23.489] (==) fglrx(0): Default visual is TrueColor
[ 23.489] (**) fglrx(0): Option "DPMS" "true"
[ 23.489] (==) fglrx(0): RGB weight 888
[ 23.489] (II) fglrx(0): Using 8 bits per RGB
[ 23.489] (==) fglrx(0): Buffer Tiling is ON
[ 23.508] (II) Loading sub module "fglrxdrm"
[ 23.508] (II) LoadModule: "fglrxdrm"
[ 23.508] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 23.508] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 23.508] compiled for 1.4.99.906, module version = 8.97.2
[ 23.525] ukiDynamicMajor: found major device number 251
[ 23.526] ukiDynamicMajor: found major device number 251
[ 23.526] ukiOpenByBusid: Searching for BusID PCI:1:5:0
[ 23.526] ukiOpenDevice: node name is /dev/ati/card0
[ 23.526] ukiOpenDevice: open result is 12, (OK)
[ 23.526] ukiOpenByBusid: ukiOpenMinor returns 12
[ 23.526] ukiOpenByBusid: ukiGetBusid reports PCI:1:5:0
[ 23.526] (**) fglrx(0): NoAccel = NO
[ 23.526] (**) fglrx(0): ATI 2D Acceleration Architecture enabled
[ 23.526] (--) fglrx(0): Chipset: "ATI Mobility Radeon HD 4200 Series" (Chipset = 0x9712)
[ 23.526] (--) fglrx(0): (PciSubVendor = 0x17aa, PciSubDevice = 0x21b8)
[ 23.526] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[ 23.526] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
[ 23.526] (--) fglrx(0): MMIO registers at 0xd0400000
[ 23.526] (--) fglrx(0): I/O port at 0x00009000
[ 23.526] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 23.555] (II) fglrx(0): ATIF platform detected
[ 23.556] (II) fglrx(0): AC Adapter is used
[ 23.576] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 23.582] (II) Loading sub module "vbe"
[ 23.582] (II) LoadModule: "vbe"
[ 23.603] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 23.617] (II) Module vbe: vendor="X.Org Foundation"
[ 23.617] compiled for 1.12.4, module version = 1.1.0
[ 23.617] ABI class: X.Org Video Driver, version 12.1
[ 23.629] (II) fglrx(0): VESA BIOS detected
[ 23.629] (II) fglrx(0): VESA VBE Version 3.0
[ 23.629] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 23.629] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[ 23.629] (II) fglrx(0): VESA VBE OEM Software Rev: 10.94
[ 23.629] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
[ 23.629] (II) fglrx(0): VESA VBE OEM Product: RS880M
[ 23.629] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 23.652] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[ 23.652] (--) fglrx(0): Video RAM: 262144 kByte, Type: DDR3
[ 23.652] (II) fglrx(0): PCIE card detected
[ 23.652] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 23.652] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 23.655] (II) fglrx(0): Using adapter: 1:5.0.
[ 23.663] (II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000)
[ 23.691] (II) fglrx(0): Interrupt handler installed at IRQ 18.
[ 23.691] (II) fglrx(0): RandR 1.2 support is enabled!
[ 23.691] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 23.692] (==) fglrx(0): Center Mode is disabled
[ 23.692] (II) Loading sub module "fb"
[ 23.692] (II) LoadModule: "fb"
[ 23.692] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 23.722] (II) Module fb: vendor="X.Org Foundation"
[ 23.722] compiled for 1.12.4, module version = 1.0.0
[ 23.722] ABI class: X.Org ANSI C Emulation, version 0.4
[ 23.722] (II) Loading sub module "ddc"
[ 23.722] (II) LoadModule: "ddc"
[ 23.722] (II) Module "ddc" already built-in
fglrxinfo while running Xorg without an xorg.conf gives me this:
X Error of failed request: BadRequest (invalid request code or no such operation)
Major opcode of failed request: 135 (GLX)
Minor opcode of failed request: 19 (X_GLXQueryServerString)
Serial number of failed request: 12
Current serial number in output stream: 12
And in a console it tells me that it can't open display(null)... all of which I suspect is expected behaviour when the driver is not actually in use. I just wish something would tell me what's actually *wrong*, here, instead of just expecting me to magically figure out exactly the right configuration that will actually let me use fglrx.
I... I just want to be able to play minecraft. :`(
Last edited by Medlam (2012-09-18 13:48:42)I'm sure you've tried reading https://bbs.archlinux.org/viewtopic.php?id=57084
and http://wiki.cchtml.com/index.php/Configuring
and I'm sure you've done
aticonfig --initial
I had to use https://wiki.archlinux.org/index.php/AT … leshooting, specifically the part about disabling EXAPixmaps to make my card work.
What model is your ATI card? that would help. A LOT of ATI cards were dropped from proprietary support with the Catalyst driver. -
Black screen in Creative Cloud app 1.8.0.447 on Windows 7
Hi!
After updating the Creative Cloud application to the latest version (1.8.0.447), I have a blank black screen in the Home tab of the application. The Apps, Resources and Behance tabs work as they should.
Also, I noticed that playing any one of the "What's new" videos that pop up when starting an installed application (e.g. InDesign) gives blank screen. I can hear the sound of video, but there is no movie or playing controls whatsoever.
Everything was fine prior to the update. I have not made any other updates in between the two Creative Cloud versions (no Windows Update, no new graphics drivers). I am using Windows 7 Enterprise on HP Zbook 14 with dual graphics (Intel/AMD).
UPDATE: As i keep working, I discover more parts of the application suite that look similary (blank/black). Here's the new Adobe Color panel in InDesign.
Regards,
Jacob
Meddelandet redigerades av: Jacob WodzynskiHello,
I had a simillar issue using my Notebook (Samsung Series 7 NP770Z7E-S04DE with Core i7 (3rd Gen) and a second graphics adapter (AMD Radeon HD 8870M). After upgrading from Win 8 to 8.1 i had really a lot of trouble because the OS update brought new drivers for both graphics adapters which obviously did not work together. I had to reverse the update because the notebook was not showing anything but the mouse cursor. Windows 8 had some other anoying bugs so I decided to ignore the warnings of my IT-Partner and Samsung and do a clean install of Windows 7 Pro. Since then I had the problem you, jacobwod, describe but I did not care because neither I used the Cloud-Space nor there were fonts available. Today I read your post and experimented with the settings. By accident I found out that enforcing the usage of the Intel-Chip (HD 4400 I think) for not only the creative cloud.exe but also a file called "adobe cef helper.exe" in C:\Program Files (x86)\Adobe\Adobe Creative Cloud\hex\" seems to be a solution. Thanks jacobwod for getting me on the right track. -
Z68A-GD65-G3 SLI black screen lock ups
Let me start off by saying I have tried everything and I motivate everyone to prove me wrong and provide me with a solution to this issue.
System spex:
MSI z68A GD65 G3
2600k
Corsair XMS3 1600 16GB
Corsair AX1200
2 - EVGA GTX 580 3GB SLI
Running beta bios: E7681IMS.N49 from -> https://forum-en.msi.com/index.php?topic=151148.msg1144560#msg1144560
I have tried almost every BIOS under the sun, including "standard bios" ie flash back to factory BIOS
So here is the issue:
In order to run SLi I have to be at completely stock settings, if I even up the multiplier to x35 on my CPU I black screen as soon as I bench/game on the cards. If I bench only the CPU (prime95) it is fine and no issues. but again as soon as I loud up something graphics wise the screen goes black and locks up.
It isn't the cards either, each card has been tested on its own and in different PCs in SLi.
It is like the motherboard cant handle the power??????
Someone else has to be overclocking and running two power house cards like this without issues? right? what did they do different? what settings? am I missing something?
Or do I need to contact MSI and get a RMA in process.
Before adding the extra card I had my CPU @ 4.7Ghz and when I would bench it I would take it to 5Ghz+ without a issue... solid, never had a BSOD. but this extra card just kills the systems.
Again everything set to stock and the system runs great I can game on it for hours without issues.
Thanks
NickQuote from: Bernhard on 30-December-11, 00:22:38
I am not running your PSU down, don't get me wrong. You have the best PSU by general consensus. All I am suggesting is to check it in another system under similar OC conditions with approx the same specs.
It does fine with SLI non OC, yet when you add the extra load of OC, and that can be an additonal 50 to 100W, then the PC becomes problematic.
It could be something else, but one has to start eliminating potential culprits.
Edit: Did you install Virtu ? If so, have you tried deleting it again for a test ?
Oh I understand completely and thank you for your suggestion and time, it helps me to believe that it could be my PSU even more, I am borrowing a PSU from a friend and a PSU tester from work and tonight will get a chance to do some full testing on the PSU.
If that tests out ok I will pull my PSU out and RMA it. hopefully Corsair will have a quick turn around.
Virtu isn't installed, I will double check but it was disabled in BIOS, but i have reset my BIOS so many times I will make sure it still is.
I will report back with my findings.
Maybe you are looking for
-
Is it possible for 10.6.8 to sync mail with my ipad and iphone5?
I notice that all my mail is different from MacBook Air, iPad, and iPhone 5. My iphone and ipad are on icloud. Even they don't sync. My ipad shows 55; my iphone shows 62, and my MacBook Air shows 66. So I can never trust that I have all my email
-
How do I play a video through a connection to a projector? I have the connector for the iPad.
how do I play a video through a connection to a projector? I have the connector for the iPad.
-
HR master data change export with Interface-Toolbox PU12
Hello out there ! I implemented a HR master data change export with PU12 at one of my customers. It works fine - with one little problem: It is only possible to export one period (actual or selected). Is there any possibility to export more than one
-
I want to create a link from a drawing name in a report to a drawing file. The link is made up of a drawing name and revision which are columns on the report. Is it possible to do this with WebDB? Example: drawing number = 001-1234-25 revision = A HT
-
DHCP not providing option 252 since upgrade to 2008 R2
We have been using DHCP option 252 to provide details of the WPAD.DAT file for proxy auto config for the past 4 years and it has been working well. We recently upgraded (replaced) out DC from an old W2k3 server to a 2008 R2 server. The DHCP options