A blackappworld can resolve a lots of your problem look here!!

Unlike the red power button on your phone which merely reloads your device, QuickPull will actually refresh the device, freeing up memory and increasing performance!
QuickPull Free has more than 1,000,000 users to date.
Schedule to run a QuickPull at a certain time each DAY, or multiple times each WEEK with NEW convenient scheduling features to keep your memory and performance running at its best.
You can even set a MEMORY threshold that will allow QuickPull™ to alert you when your available memory drops too low. If the memory drops, memory monitoring will prompt you to run a QuickPull™
QuickPull is extremely easy and convenient to use.
FEATURES
    * FREE
    * Simulates a "battery pull" equivalent reset.
    * Integrates with AutoStandby.
    * Ability to schedule to run daily.
    * Automatically accepts reset dialog.
    * Advanced scheduling, run a QuickPull daily or on certain days each week.
    * Memory monitoring.
    * Set your own memory threshold.
    * Prompted automatic reboots if your memory is less than your set threshold, with the ability to cancel a reboot.
    * Scheduled QuickPulls will wait until phone calls are complete.
    * Receive automatic notifications on missed resets due to a locked or holstered device.
    * 5 second warning notice can cancel pending QuickPull runs to keep from interfering with other tasks.
    * New and enhanced, user-friendly interface.
    * Toggle schedule on or off without losing any settings.
    * No technical support
    * (for technical support and no ads, please consider QuickPull Pro)
Don't forget to CLICK that BLACK or GRAY Kudos square if some one was helpful.
Also please mark it as a solution if your problem is solved.

Thanks for the replies........... They helped a lot, as I
thought.. I named the text field a different name and was using in
the code with a different name.. Thank you all people, I actually
now think that I can try the deafult object 'this.' and _parent
which were too vauge before but now within grasp.... Thanks Once
for you time and Patience! :-)

Similar Messages

I have a hard time understanding why I can't contact support about YOUR problem. I plugged my iPhone into my pc. iTunes came up. It said there was an update available for the phone. I accepted that. Clicked on the "download only" because I didn't have the

I have a hard time understanding why I can't contact support about THEIR problem. I plugged my iPhone into my pc. iTunes came up. It said there was an update available for the phone. I accepted that. Clicked on the "download only" because I didn't have the time to install it at that point. It downloaded but didn't stop. It continued to the 'backing up your iPhone' segment then froze. I waited at least an hour with no change. Finally I unplugged my phone..iTunes wasn't responding.I rebooted my pc then tried the same thing again. Same outcome even though I let it "Back Up" for 7-8 hrs while I slept. Same Story............... iTunes 10.4.0.80 is the software I'm using. When my phone is 'plugged' in what I see on it's face is "Sync in Progress".....for hours!

Error 1611
This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
Synced media like apps and music are not included in the iPod backup that iTunes makes. You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Most originally english language movie rentals in the Spain iTunes store are dubbed in Spanish and dual audio is not available! ¿Who can I contact to have this problem looked at

I've really cut back on my movie rentals in iTunes because of the lack of language options. It's so frustrating, especially considering that it's something that should be so easy to do!

You can comment to Apple via their feedback page, if you wish:
http://www.apple.com/feedback/itunesapp.html
Regards.

I use sites with pdf's a lot. Why isn't pdf viewing built into Firefox? The extensions can't keep up with your rapid upgrade program.

I use sites with pdf's a lot. Why isn't pdf viewing built into Firefox? The extensions can't keep up with your rapid upgrade program.

Thank you for your post. This forum is for Sony Consumer and Vaio products - for gaming questions and discussions there is a separate PlayStation forum:
http://community.us.playstation.com

I am using elements 11. I cannot open editor because configuration error occurs with message "errror 213:11". What happened? What can I do? Thanks a lot for your support.

I am using elements 11 with Windows7. I cannot open editor because configuration error occurs with message "errror 213:11". What happened? What can I do? Thanks a lot for your support.

See if this helps:
Error "License store does not allow writing" | Install log | CS5, CS5.5

HT1918 Hello , I will like to change my payment information but my new credit card is not American , Is Canadian .How can i change the country on my billing info? I cant seam to be able to do it . Thanks a lot for your help ,

Hello ,
I will like to change my payment information but my new credit card is not American , Is Canadian .How can i change the country on my billing info? I cant seam to be able to do it .
Thanks a lot for your help ,

What country are you in ? If you are in the US then you can only use the US iTune store, and you can't use a Canadian credit card with the US store - a credit card needs to have been issued by a bank in the country where you are.
If you are in Canada then remove your old credit card from your account and then update your country/region and billing address on your account e.g. by tapping on your id in Settings > iTunes & App Store on your phone and 'view Apple id' on the popup, or via the Store > View Account menu option on your computer's iTunes

HT3552 I am billed 3 times for a same item. How can I get the problem fixed? Thanks a lot for your help.

I am billed 3 times for a same item. How can I get the problem fixed? Thanks a lot for yur help. nhuttan448

Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards.

People Picker can resolve users and security group from another domain but no validation for groups

Dear all,
Here is the scenario of our issue:
We are migrating from Domain A to Domain B and in Domain A we currently have a SharePoint 2013 on which we want to set permissions for users and groups that have already migrated to Domain B.
A bi-directional trust exist between the two domains and all applications relying on trust and resolving IDs from on domain to another are working fine (Windows RDS for instance)
The "bug" that we have is when using the PeoplePicker, it can resolve without any issue a user account in Domain A or B, and a security group (type global, I haven't tried local or universal yet) from domain A or B. But for the security groups
only (it works well for users), when I click on "Save" to validate the add of the group to the site permissions, I have the following error:
I have seen a lot of similar issues on the web but no answer so far that work :(
Example: https://social.technet.microsoft.com/forums/sharepoint/en-US/74e8d14b-a0f4-4e21-8cfa-b1a937247160/cant-provision-security-to-old-domain-users
If you have any question that could help you to understand it, do not hesitate.
Thanks a lot in advance for your help ! :)

Can you give the snippet from the ULS log where you're seeing this error?
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

"SOME" devices can resolve the ALIAS (CNAME record) for a device, but not the REAL name (A record) - Why? How do I fix this?

I'm running the DNS server role on Windows Server 2012 R2 on a physical machine on my home network.
My AD is configured with a non-registered name - let's say it's "home.acme.ca" and the DNS server is configured to host that zone. I also configured a 2nd zone in the DNS server called "myinf.acme.ca". They both run on a physical
server with an IP of 192.168.1.10
The DHCP server on my Cable Modem is configured to hand out 192.168.1.10 as the only DNS server to every device on my network. On my servers (with static IP addresses), 192.168.1.10 is configured as the only DNS server available for them.
I took the DNS servers from my Cable Provider and configured a Forwarder on my server to send name resolution requests to them only if my DNS server can not answer the request - basically for any name resolution request that does not end with ".home.acme.ca"
or ".myinf.acme.ca"
The "home.acme.ca" zone is populated with 'A' records for all of the physical and virtual servers and PC's on my network.
The "myfin.acme.ca" zone is populated with 'CNAME' records that point directly to the 'A' record in "home.acme.ca" - for example, I have a serve named s000abc123ww.home.acme.ca with an 'A' record providing an IP address of 192.168.1.20 and
I created a 'CNAME' (alias) record named 'webserver.myinf.acme.ca' which points to the 'A' record 's000abc123ww.home.acme.ca'
2 of my 6 machines can resolve the alias but not the real name of the server!
.10 is the Domain Controller. All of the other machines (except .98) are members of the home.acme.ca domain.
I attempted to ping 's000abc123ww.home.acme.ca' AND 'webserver.myinf.acme.ca' on the following 6 computers. I used the fully qualified name in all cases.
4 of the below machines are able to resolve BOTH names. The other 2 can resolve the Alias but not the real name!
I don't understand how this is possible, but I would like to fix it...!!! Please help?
.10 - Server 2012 R2 (Physical) - Hosts Active Directory and DNS.
.20 - Server 2012 R2 (Virtual)   - Runs SQL Server
.21 - Server 2012 R2 (Virtual)   - Runs Apache
.22 - Server 2012 R2 (Virtual) -   Runs Apache. This is the device I am trying to ping (s000abc123ww)
.98 - Windows 7 (Physical)
.99 - Windows 7  (Virtual)
.21 (which is configured nearly identically to .20 and .22) can resolve and ping the Alias, but not the real name.
.98 can also resolve and ping the Alias, but not the real name.
The rest of the machines can resolve and ping both the alias and the real name.
All of the Virtual Machines are running under Hyper-V on the .10 physical server.
All the devices are on the same subnet.
Thank in advance to anyone who can help me understand and correct this problem!
Jim

Hi,
CNAME resource records are recommended for use in the following scenarios:
• When a host that is specified in an A resource record in the
same zone needs to be renamed
• When a generic name for a well-known server, such as www, must resolve to a group of individual computers (each with individual A resource records) that provide the same
service, for example, a group of redundant Web servers
Therefore please try to create your CNNAM record in the same zone and try again.
The related KB:
Adding, Changing, and Deleting Resource Records
http://technet.microsoft.com/en-us/library/cc779020(v=ws.10).aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Hi, I have a Indesign user who inherited a PC with Indesign installed. Indesign works with old PC user profile but not the new user. Any ideas how I can resolve this?

Hi, I have a Indesign user who inherited a PC with Indesign installed. Indesign works with old PC user profile but not the new user. Any ideas how I can resolve this?

Question # 1 is what do you mean by "inherited"? Is this a case where the computer belonged to someone else? Your user would not be entitled to use a program licensed to someone else.

Can anyone advise how to resolve the 'unexpected and unrecoverable problem..?

I am running PS CS5 in Windows 7 and it has been
fine for six months. It now presents the dreaded 'unexpected...' error messages and crashes on start-up, also freezing the interface so I cannot close it. Can anyone suggest the best course of action to resolve this. I also ruun Lightroom 3 and InDesign and both of these work fine.
Thanks in anticipation

You might want to try to move forward first, and failing that drop back.
What I mean is that you should try these things, and test after each one to see if the problem is resolved.
1. Bring all software and drivers up to date. For example, visit the web site of the maker of your video card and download / install their driver that matches your video card and operating system. If you can, choose Help - Updates... in Photoshop, and if you can't go to the Adobe site and download the latest update manually.
2. Clear Photoshop's preferences to defaults by pressing and holding Control - Shift - Alt immediately after cold-starting Photoshop from its menu entry or shortcut. If you're quick enough, it will prompt you to confirm deletion of the current settings. Note that you'll have to review and remake your personal preference customizations, though if you save a named Workspace prior to doing this you can restore it to get your panel positions back.
3. Deconfigure OpenGL Drawing by going into Edit - Preferences - Performance and unchecking the [ ] Enable OpenGL Drawing setting. Remember to restart Photoshop before testing this.
4. Use your Windows System Restore function to drop your system configuration back to a date when you know the software was working. This assumes something on your system has changed making Photoshop unworkable.
Good luck.
-Noel

I need to reinstall my Final Cut Express. I have a version of 3.5 and then an upgrade to 4. Somehow I have managed to mislay the serial No for 3.5 so cannot install. Does anyone know how I can resolve this.

I need to reinstall my Final Cut Express. I have a version of 3.5 and then an upgrade to 4. Somehow I have managed to mislay the serial No for 3.5 so cannot install. Does anyone know how I can resolve this.

If version 4 is an upgrade only, you will have to have the serial number of the 3.5 full version.
If you can't find it try contacting Apple with your proff of purchase, they may be able to help.
Al

When I switch libraries I lose the majority of the material in my main library and can only restore it by repairing the database. Can anyone tell me why this is happening and how I can resolve the problem? Thanks

When I switch libraries I "lose" the majority of the material in my main library (or at least I can't see it) and can only restore it by repairing the database. Can anyone tell me why this is happening and how I can resolve the problem? Thanks

I seem to have found a way around it. Rather than switching libraries by going into files/switch libraries I used Aperture Preferences to change them. I've done it a couple of times and it appears to work OK.
That is an interesting finding. It suggests, that your "Preferences" file "com.apple.Aperture.plist" may have been corrupted and you fixed it this way. Can you now switch between libraries the usual way? If not, I'd try to remove the "preferences" file from the user library to the Desktop and relaunch Aperture.
The Aperture 3: Troubleshooting Basics:http://support.apple.com/kb/HT3805
describe how to remove the user preferences.

Hello... the airport (wifi) connection on my imac is oftenly "freeze" and need to reconnect again. Can everyone help to solve this problem? It's not happened to other computer on the same network in the same area (distance). Thanks a lot.

Hello... the airport (wifi) connection on my imac is oftenly "freeze" and need to reconnect again. Can everyone help to solve this problem? It's not happened to other computer on the same network in the same area (distance). Thanks a lot.

Hello,
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.5, 10.6, 10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x/10.8.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
(There may be better or faster DNS numbers in your area, but these should be a good test).
Click OK.
If that doesn't work try changing channels on your Router.

HT201401 When I receive a call my ring tone only sounds 40 seconds or less and then stops and disconnects the call. What can I do to solve this problem?. I lost a lot of calls because of that.

When I receive a call my ring tone only sounds 40 seconds or less and then stops and disconnects the call. What can I do to solve this problem?. I lost a lot of calls because of that.

Ring duration & voicemail are all controlled by your carrier. Your issue seems to be voicemail...doesn't appear to be setup on your phone. I'm not aware of any carrier that permits a cell phone to ring longer than 30 ~ 40 seconds, so that appears to be normal. Contact your carrier as it looks like your issue is voicemail.

A blackappworld can resolve a lots of your problem look here!!

Similar Messages

Maybe you are looking for