A BUG? - dynamic combo problem

Hello!Setting dynamic option in the combo, where the essbase shared members are selected causes a problem.There is no way to open the report containing such combo - an "error occured while loading report" message apears. Does anyone experienced such error? Are there any ideas how to use dynamic combos and shared members?thanks

Of course this issue concerns Analyzer 6.1

Similar Messages

ALT Key combo problem + unlock + freezing+disconnect while on usb

im having the famous alt combo problem..i tried everything i could from trying to unjam the camera button which wasnt jammed lol.. i noticed when my mob goes on standby i need to press the switch off button or standby btn for 5 secs so that screen lights up again...
then another massive problem..i tried to erase OS and all..i get my bb connected to laptop,detected and stuffs..but as soon as i wanna manipulate it from tthe desktop manager it disconects. it still charges but absent in the device manager..if i leave it connected it without trying to manipualte it it works all fine :/
any idea folks? oh i cant return the phone...bought that like 12k km away lol
oh and when i wanna take a picture with the convenience button it will only zoom but not take any pic
been a week since i got the bb

Hello
try swictch system by normal way !!
use system pref -> startup disk -> select system to startup ( win7 )
ask restart from apple menu
to back into OS X do exactly same thing into win7 ( startup disk icon into "configuration panel" )
if "startup disk do not exist , install it from 2d dvd come from your mac ( part of boot camp installation process )
Pierre

Dynamic Link Problem beim Batchencoden???

Habe seit kurzem folgendes Problem: Exportiere ich mehrere Videos über den Media Encoder, habe ich bei fast der Hälfte der Filme "kaputte Videos" entweder nur an den Effekten oder beim kompletten Video. Rechne ich die Filme einzeln raus, ist alles ok. Das stinkt sehr nach Dynamic Link Problem. Ich kennen das z.T. schon in der Zusammenarbeit mit After Effects. Hier rechne ich meine Projekte erst, bevor ich sie in Premiere reinhole. Aber auf das Batchencoden kann ich nicht verzichten, da ich teilweise 30 und mehr Clips in verschiedenen Formaten rausrechnen muss und das wirklich nicht einzeln erledigen will.
Frage: Hat jemand ne Idee (das Problem existiert erst seit kurzer Zeit), ob da irgendwelche caches vollaufen, kann man dynamic link irgendwie "resetten" oder muß ich das ganze Production Premium Paket CS5.5 neu installieren (wollte ich eigentlci vermeiden!!!!!)?
Ach ja, System Windows 7 64Bit mit CS5.5
Gruß
Stefan

Operator error. Answered my own question. I haven't used Dynamic Link much. It works fine. I was momentarily confusing the import of a PP project vs. a Dynamic Linked Sequence.

CS4 Dynamic Link Problem

Is anybody having trouble keeping the source files linked in After Effects after using dynamic link from Premiere?
Please refer to this link:
cwrig, "CS4 Dynamic Link Problem" #1, 26 Oct 2008 1:02 pm
This is very frustrating.
Thanks for your time!

Did some more tests and here is what does and doesn't work for me.
Losing footage -
Yes I was having the issue (and the topic is in the premiere forum also)
Here is what seems to solve it.
It loses the footage if I use the original folder which has spaces in the name. Not sure if that is the culprit but both methods proved consistent in every test I did.
it worked when I used a new folder called "Test" at the root of my editing drive.
Crashing-
Not sure if other have the issue but when I close AE, PPro will just sit there with an hour glass and show as not responding.
If I close PPro first and then AE and reopen PPro then all seems to work as it is supposed to.
This was also consistent in every test I did.

Needs multi column dynamic combo box using C#

I need a dynamic Combo box to display multi columns on Drop Down Event
such as Stock Code, Make, Model,Sub Model, Measurement Type and so on for my C# Application with Columns Headers
Please Help Me
Thanks in Advance

You should create a class that represents your model and then you could use a CompositeCollection as the ItemsSource of the ComboBox.
Here is an example for you:
namespace WpfApplication59
public class YourModel
public string StockCode { get; set; }
public string Model { get; set; }
//+ the rest of your properties
MainWindow.xaml.cs:
public partial class MainWindow : Window
public MainWindow()
InitializeComponent();
List<YourModel> models = new List<YourModel>();
models.Add(new YourModel() { Model = "m1", StockCode ="c1"});
models.Add(new YourModel() { Model = "m2", StockCode = "c2" });
cb.ItemsSource = models;
MainWindow.xaml:
<ComboBox x:Name="cb" Grid.IsSharedSizeScope="True" ItemsSource="{DynamicResource items}"
xmlns:local="clr-namespace:WpfApplication59">
<ComboBox.Resources>
<CompositeCollection x:Key="items">
<ComboBoxItem IsEnabled="False">
<Grid TextElement.FontWeight="Bold">
<Grid.ColumnDefinitions>
<ColumnDefinition SharedSizeGroup="A"/>
<ColumnDefinition Width="5"/>
<ColumnDefinition SharedSizeGroup="B"/>
</Grid.ColumnDefinitions>
<Grid.Children>
<TextBlock Grid.Column="0" Text="Model"/>
<TextBlock Grid.Column="2" Text="Stock Code"/>
</Grid.Children>
</Grid>
</ComboBoxItem>
<Separator/>
<CollectionContainer Collection="{Binding Source={x:Reference cb}, Path=DataContext}"/>
</CompositeCollection>
<DataTemplate DataType="{x:Type local:YourModel}">
<Grid>
<Grid.ColumnDefinitions>
<ColumnDefinition SharedSizeGroup="A"/>
<ColumnDefinition Width="5"/>
<ColumnDefinition SharedSizeGroup="B"/>
</Grid.ColumnDefinitions>
<Grid.Children>
<TextBlock Grid.Column="0" Text="{Binding Model}"/>
<TextBlock Grid.Column="2" Text="{Binding StockCode}"/>
</Grid.Children>
</Grid>
</DataTemplate>
</ComboBox.Resources>
</ComboBox>
You could restyle the the templates (Grids) as per your requirements.
Please remember to mark helpful posts as answer to close your threads and then start a new thread if you have a new question.

Report a bug, if this problem is not solved, p2p of rtmfp will not be of much use

Recently, we have several clients on a p2p application, but we use the development version to test, two-way voice and video connection is not successful, several customers of the network environment is as follows:
First of all, there is no firewall;
These networks have in common is:
After an optical access, the subnet with a lot of routers, one by one, and some series, some parallel, some in series and then parallel, and some in parallel then in series, in short, they can be online, and then not the same segment of the computer, p2p connection is not successful, and other computer connection is not successful, and some also use the vpn.
Analogy: 192.168.5.10 and 192.168.10.10 to connect not, 192.168.5.10 and 192.168.5.11 is ok, is 192.168.5.10 may be outside the network of other computers can connect to, but 192.168.10.10 possible and other computers outside the network connections are not.
Hope you solve this problem as soon as possible, because rtmfp too expensive, otherwise p2p applications, are generally large companies (schools, government) affordable, and their networks are very complex, they do not take, you will no client .
My English is not very good, google translation
I gave you a bug report so long, how did not care for me ah;
This forum nobody, or you did not test this bug, you do not have time to correct this bug;
Either we modify not the flash player platform to the bottom of things, I will not give you advice.
In fact, standing on a technical point of view to think that I have is to use a socket network communication can be OK, network barrier, it is not.
But would like the user's perspective, I can be normal to the Internet, other p2p communications software, I can, on this thing, impossible, it is this software not work, so that this bug is that we must solve the .
I am very concerned about this issue every day and came to see nobody replies, I think this problem, I think, to solve this problem, you can proceed in two ways:
1.dns
I think it may be able to solve this problem, dynamic dns,
The idea is: to allow users to connect to the server, the user computer first upd listener (that is, iis services), then farid + domain to form a secondary domain name server dynamically to resolve the domain name to the user's computer, in a timely manner to refresh dns.
In this way, the user's computer, there is a fixed identity.
2 gateway
From users within the LAN to solve this problem, it can only proceed from the gateway.
For example, to use arp and other means to get to the router, where each segment ip then ip, similar to the route command to specify more than one gateway to the user's computer may be able to solve this problem.
In theory, these two methods may be feasible.
We also expect a new solution, I do not know Daoxing not
Speak before this program, take a look at our test for RTMFP p2p network topology, and the test results (explain, test, do not open the firewall and router are not set up static routing).
Computer A, computer B - "router A -" server S
The above NetConnection.Connect.Success 95% NetStream.Connect.Success 5% NetStream.Connect.Fail
Computer A - "Router A - servers S" - routers B - Computer B
Above, NetConnection.Connect.Success, NetStream.Connect.Success
Computer A - "Router A - servers S" - router B - routers C - Computer B
Above, NetConnection.Connect.Success, 50% NetStream.Connect.Success 50% NetStream.Connect.Fail
(Computer A - Router A, computer B) - router B - server S
Above NetConnection.Connect.Success, 100% NetStream.Connect.Fail
Computer A - "Router A -" router B - server S "- Router C" - router D "- computer B
Above NetConnection.Connect.Success, 100% NetStream.Connect.Fail
Computer A - "Router A -" Router B - "Router C -" server S "- Router D" - Router E "- computer B
Above NetConnection.Connect.Success, 100% NetStream.Connect.Fail
See the above test results, is not very bad, the key is FMS4.5 sell 450,000 RMB in China, their own software does not do a good job, but also to sell such a high price in China, a man named QQ. The above test environment, all 100% NetConnection.Connect.Success 100% NetStream.Connect.Success, free, QQ has more than 100 million users, QQ companies rely on advertising to make money game.
Seems to digress, huh, huh.
The test results, 100% NetConnection.Connect.Success, and NetStream.Connect.Fail the main reason is because the route connected in series or more than two or two and then caused.
From a technical perspective, as a packet travels through a number of the NAT router default all packets can be out, new packets can not be into the second layer of the router caused.
Find the reason, we think of a countermeasure to solve this problem from the software itself.
The last case of the above test environment, for example:
When computer A and server S NetConnection.Connect.Success computer B with the server the S NetConnection.Connect.Success, computer A to Router D sends an upd packets, not because the router can only broadcast the data packet to computer B, so 100 % NetStream.Connect.Fail.
The 100% NetConnection.Connect.Success, if we can NetStream.Connect, and NetConnection.Connect connected together, is not can be 100% NetStream.Connect.Success?
In other words, no matter what circumstances, computer A and computer B can and server S connection is successful, the other way round, that is, the server S and the Computer A or Computer B can connect.
We can not let the computer A or computer B, pretending to server S (In theory, called NAT, technically speaking, is to modify the source ip of the packet header and source Mac server S, and parity), the router not in the NAT, and other communications.

Hi Mr. Wog,
My guess is that once you see an estimate for replacement for hundreds of dollars, those scratches won't look too bad anymore. There are products to cover the outer casing, and some people put stickers on, or even paint (I don't recommend either, but ymmv). Good luck.

Dynamic Processing Problem

I've been having the problem of sound basically being muted when I use dynamic processing. This problem wasn't present in an earlier version of Audition, so I'm wondering if it's a feature to tell me something or if it's a problem, as in the settings aren't right.
To go around this problem, I use a heavy clip restoration effect, but it doesn't work on the sound files
i all the time
, because the audio still leaves spikes that can cause the muting.
Is this a bug in the software, am I doing something wrong, or is this a warning of some kind?
Jeremy

Yes that's true when ever you try to use ParForEach block then for each value entry in the table a separate workitem ID is created, i.e. a separate instance is created that paralle processing is not possible like that
Instead of that what you can do is create a fork with 3 branches and define a End Condition such that until all 3 branches are executed .
Before to the fork step determine all the agents and store them in a internal table , you can access the one internal table entry by using the index value check this [wiki|https://www.sdn.sap.com/irj/scn/wiki?path=/display/abap/accessingSingleEntryfromMulti-line+Element] to access single entry from a internal table.
For each task in the fork assgin a agent
So, as we have defined the condition that until all the three branches are executed you don't want to come out of the fork step so, it will wait until all the stpes are completed.

IAS 6.5 dynamic loading problem

Hi all,
I have a IAS 6.5 with enable dynamic loading features installed on SUN Solaris platform. This application server had deployed 2 applications. My problem is my servlet class could not be dynamic loading unless restart the application server. Here is my class path setting inside the iasenv.ksh
CLASSPATH=:/opt/iplanet/ias6/ias/APPS/modules/icbcobs/WEB-INF/classes:/opt/iplanet/ias6/ias/APPS/modules/ess/WEB-INF/classes:/opt/iplanet/ias6/ias/APPS/modules/ess/config
## ORBIX configuration settings
## These values are to be set for ORBIX configuration
IT_PRODUCT_DIR=/opt/iona
IT_LICENSE_FILE_DIR=/etc/opt/iona
ORBIX_DOMAIN_NAME=localhost
ORBIX_CONFIG_DOMAINS_DIR=/etc/opt/iona/domains
ORBIX_LOADBALANCING=true
ORBIXCLASSPATH=$IT_PRODUCT_DIR/orbix_art/1.2/classes/omg.jar:$IT_PRODUCT_DIR/orbix_art/1.2/classes/orbix2000.jar:$IT_PRODUCT_DIR/orbix_art/1.2/localhost:$IT_LICENSE_FILE_DIR
## Visibroker configuration settings
## These values are to be set for Visibroker configuration
VISIBROKER_PRODUCT_DIR=/opt/inprise/vbroker
VBROKER_ADM=$VISIBROKER_PRODUCT_DIR/adm
OSAGENT_PORT=14000
export VBROKER_ADM
export OSAGENT_PORT
if [ "$script" = "kjs" ]
then
JVMARGS=
if [ "$sun" ]
then
## Internal JVM bug workaround for Solaris JDK1.2.2_05a
## Disable Parallel Garbage Collection to workaround the
## occasional JVM Crash. Needs to go once the bug is fixed
JVMARGS=no_parallel_gc
fi
fi
if [ "$script" = "beanreg" -o "$script" = "jspc" ]
then
JAVA_ARGS=
[ "$sun" ] && export JAVA_ARGS="-Xms32m -Xmx64m"
fi
export NLSPATH=$IAS_ROOT/kdb/encina/%L/%N
export LANG=${LANG:-C}
PATH=$IAS_ROOT/bin:${IAS_ROOT}/APPS/bin:$JAVA_EXECS_DIR:$PATH
IASPATHS=
[ -n "$ORACLE_HOME" ] && IASPATHS=$IASPATHS:$ORACLE_HOME/bin
[ -n "$SYBASE" ] && IASPATHS=$IASPATHS:$SYBASE/bin
[ -n "$INFORMIXDIR" ] && IASPATHS=$IASPATHS:$INFORMIXDIR/bin
[ -n "$DB2DIR" ] && IASPATHS=$IASPATHS:$DB2DIR/bin
[ -n "$IASPATHS" ] && PATH=$IASPATHS:$PATH
# Union of all CLASSPATHS
If I didn't set my own classpath , since I've 2 applications inside the one server , the dynamic loading was working fine in both servlet and JSP. Due to there were some class files with same name inside the 2 applications, so I need specifiy the exact class path to avaid the mis-using. However, after I specify the classpath, the servlet dynamic loading was working failure. Any solution ?
Thanks.

check the dynamic reloading docs at
http://docs.sun.com/source/816-5786-11/jpgApxReload.html#14358
Please also check the limiations of Dynamic Reloading

Dynamic Wallaper problem

Hello,
I have iOS 7 installed on my iPod touch. When I go to the dynamic wallpapers page, only some of all the dynamic wallpapers are there. I do not have the green one, but have the original blue to purple, gray, yellow, red, and blue. I really like the green dynamic wallpaper, and is really the reason I downloaded iOS 7 (I think the menus and other stuff is way to white). Is this just a bug, or is apple expressing its dislike for iPod Touch users? I had to rewrite this TWICE due to the stupid swipe back gesture that apple has put in her (I am very annoyed and apple looking at a windows phone instead of an iPhone due to the excessive amount of bug in this new version). Also, I must type very slow as Safari is very slow in responding when I type (so I have had to redo this very slowly and really dislike apple rah this point and would like an answer

How would you solve this problem recursively? I think
you should be able to apply the same technique here.Ah, I've solved the problem now. Thank you for your help, I realized that you really can't solve it recursively using the method I was trying.

Photoshop CS4 Trial Bugs - Eraser & Text problems

Hows everybody doing...I recently downloaded the Photoshop CS4 Extended Trial and installed it on my computer...I am noticing some bugs and im not really sure if its just a bug in the trial version which will be fixed when i buy the program or if there was an error with the install...
I dont have screenshots at the moment since im not on the computer having the issue but i can get them if needed...
First lets start with the eraser tool...When i set the eraser tool as a size of say about 10px it works fine...However, if i zoom in on the image above its nautral size i start to lose the eraser...When i say lose the eraser i mean you can no longer seen the round area which will be erased..When you zoom in part of the circle disappears...It will still erase and area of the set size but its sort of hard to do erasing on detailed images when you cant see the whole eraser....
More bugs with the eraser....If i set the eraser to a larger size, say 30px or more, i right off the bat start seeing less of the eraser area....It will go from a whole circle down to something like a half moon with only half the circle being displayed...
This may be a little hard to understand so if need be i will get some screenshots of what im talking about later....
I am also having a problem with the text...For starters, i cant scroll through the text...When i enter text and highlight it and highlight the fonts i would expect to be able to scroll through the fonts while watching the actual text change on thet screen....I am unable to do that, i highlight the text and the fonts and CS4 will let me scroll maybe 4-5 fonts and then it just stops and wont scroll anymore...
Another issue im having with the font is the size....Whenever i enter text it is extremely small...Even if im working with a 200px x 200px image if i set my font at say 75px its tiny, tiny enough to where i cant even see it to highlight it....There appears to be something wrong with the sizing of the text...Just to get text to show up normally, at a readable size, i have to set the font size to 800px+ and this is on images which are only like 600px wide and 300px tall...Usually a font of 800px would fill up this image but when i do it the 800px font shows up like a 36px font...
Like i said if this is all to hard to understand i can get some screen shots later on...I wanna make sure this is something which can be fixed before i go ahead and drop 700+ on the program...

Yes i installed the patch...That was the first thing i did, before checking the video driver...The patch didnt fix any of the problems im having...The video driver update did however fix the eraser/brush issue...
I did what you said in post #1 about un-checking the option listed....When i did that nothing changed for me....
I have some more details about the scrolling issue though....From what i am able to find it seems that if i just enter digits i am able to scroll through the entire list of fonts and see a live preview of every single one....
With any sort of text it will only allow me to scroll through 5-6 fonts...You can see that it wants to scroll more when i hold the arrow down cause you can see the blue hightlight flashing and the words trying to change but it just wont go any further...At times when i hold the arrow down to scroll through the fonts it will scroll through 5-6 and then all of a sudden just go white and wont let me scroll up or not...At that point i have to select the font list and pick a font

10g Signal Handlers and Dynamic Binding Problems on Mac OS X

I have the following env vars set up, and it seems the client libs show a deadl\
ock behavior post installation. SqlPlus exhibits a similar problem with 10g cli\
ent libs on the Mac, since it simply hangs for 20 secs before returning the pro\
mpt. I have G4 10.3.4 Mac, and 3.3 (1640) gcc, and still haunted by this probl\
em...
ORACLE_HOME=/Users/Oracle/10g/orahome
ORACLE=ORACLE_HOME/bin
ORACLE_BASE=/Users/Oracle/10g
DYLD_LIBRARY_PATH=/Users/Oracle/10g/orahome/lib
a) ktrace sqlplus user/pass@db
b) kdump -R | grep sigaction gives:
885 sqlplus 5.877734 CALL sigaction(0x2,0xbffff500,0xbffff570)
885 sqlplus 0.001252 RET sigaction 0
885 sqlplus 0.002032 CALL sigaction(0xd,0xbfff90f0,0xbfff9160)
885 sqlplus 0.001831 RET sigaction 0
885 sqlplus 0.001293 CALL sigaction(0x12,0xbfffb6e0,0xbfffb750)
885 sqlplus 0.001234 RET sigaction 0
885 sqlplus 0.001551 CALL sigaction(0x12,0xbfffbda0,0xbfffbe10)
885 sqlplus 0.001401 RET sigaction 0
885 sqlplus 0.001331 CALL sigaction(0x2,0xbfffd090,0xbfffd100)
885 sqlplus 0.001333 RET sigaction 0
This shows a 5.9 sec delay for the first sigaction, and a full response is received some long 20 secs later on the prompt.
Some feedback from engineering regarding this issue since the 9i release has been:
"This is a known problem with signal handlers and the lazy binding we have on Mac OS X. A small change to how Oracle library's signal
handler is installed using _signal_nobind(3) and
_dyld_lookup_and_bind_fully(3) could help to solve this problem.
The problem that we are trying to avoid is a possible dead lock from
code that could be called in a signal handler when the thread that
gets the signal is in the middle of lazy binding a symbol. So when a
signal handlers installed the default action is to cause it to be
bound fully. This is made very expensive by the mismatch of the
interfaces to signal(3) and segvec(2) like routines which are passed
an address and the dynamic linker that wants a global symbol name. So the end result is to call the routine _dyld_bind_fully_image_containing_address(3) with the address of the signal handler to be bound. Which binds everything in the image (in this case the Oracle shared library).
We have had problems like this before. For example: [This is what is
done in usleep(3)]
usleep()
/* code removed for this example */
setvec(vec, sleepx);
#ifdef __DYNAMIC__
_dyld_lookup_and_bind_fully("_usleep", NULL, NULL);
(void) _sigvec_nobind(SIGALRM, &vec, &ovec);
#else
(void) sigvec(SIGALRM, &vec, &ovec);
#endif
static void sleepx(int unused)
ringring = 1;
The use of _sigvec_nobind(2) (or _signal_nobind(3) ) and the use of
_dyld_lookup_and_bind_fully(3) will cause just the needed symbols used by the signal handler. "
It seems this issue hasn't been resolved in the most recent 10g client release.Can anyone shed some light one this issue?
For better demonstration, here is a series of steps we took here:
sigaction.c - C file produced by "proc sigaction.pc"
sigaction.pc - ProC source file
gcc_sig* - Shell script to compile sigaction.c
ktrace.sigtest - raw ktrace output from running sigtest
ktrace.sqlplus - raw ktrace output from running sqlplus
kdump.sqlplus - output of kdump -R on ktrace.sqlplus
kdump.sigtest - output of kdump -R on ktrace.sigtest
sigaction.lis - auxiliary file produced by proc
1. sigaction.pc:
#include <stdio.h>
#include <stdlib.h>
#include "/Users/oracle/10g/orahome/precomp/public/sqlca.h"
int main(int argc, char **argv) {
char user[30], passwd[30], db[40];
char con_str[100], date[10], *icp;
strcpy(user, "XXXXXXXX");
strcpy(passwd, "XXXXXXXX");
strcpy(db, "db_name");
sprintf(con_str,"%s/%s@%s",user,passwd,db);
EXEC SQL CONNECT :con_str;
EXEC SQL SELECT SYSDATE INTO :date FROM DUAL;
printf("SYSTEM DATE = %s\n",date);
EXEC SQL COMMIT RELEASE;
2. gcc_sig:
#!/bin/sh
CFLAGS="-I$ORACLE_HOME/precomp/public -I/usr/include"
CFLAGS="$CFLAGS -I$ORACLE_HOME/lib -L$ORACLE_HOME/lib"
ORALIBS="-L$ORACLE_HOME/lib -lclntsh $ORACLE_HOME/lib/nautab.o $ORACLE_HOME/lib/naeet.o"
CC="gcc -g"
PROG=$1
OUTPUT=$2
$CC $CFLAGS $PROG -o $OUTPUT $ORALIBS
3. Generate the rest of the output files for your viewing of the results based on the commands provided above.
Thanks!

It's a delay, not a deadlock, that originatesfrom the way Oracle
libraries handle dymaic bindings.to "dynamic" bindings. Maybe prebinding could help ?
export DYLD_PREBIND_DEBUG=1ronr@[email protected]:/Users/ronr
sqlplus "/ as sysdba"dyld: sqlplus: prebinding disabled because library: /Users/oracle/product/server/10.1/lib/libsqlplus.dylib got slid
dyld: in map_image() determined the system shared regions ARE used
dyld: 2 two-level prebound libraries used out of 5
Ronald
http://homepage.mac.com/ik_zelf/oracle/

10.4.3 Combo problems after installing

Hello,
I hope someone can help me with this. I was previously using OS X 10.4.0 and went through Software Update to install various updates, including the Mac OS X Update 10.4.3 Combo, the most recent Java updates (1.4.2?), the Security Update 2005-008, and as I recall, updates for iPhoto and DVD Player. Afterwards, I discovered that the Software Update feature will crash, as will the Help feature under Finder (listed as 10.4.2). I also use Adium 0.86 for my chat program; however, whereas it will open up and remain open without a problem, whenever someone has tried to leave me an offline message, or when I try to send someone a message, it will crash. Fortunately, I also have YIM on my computer, which has never caused a conflict before, so at least I have that to rely upon. In addition, I repaired permissions a few times, both before and after the updates, rebooted the computer, etc.
I did a little research and found some advice that said to download the OS X 10.4.3. Combo directly from the Web and to try to reinstall it, but when I clicked on the download, the disk image failed to mount because of an invalid checksum. Could someone please tell me what is creating all of these problems and what I can do to fix them? I'll uninstall the update if I have to, as I think it's been more of a problem for me than anything else, but I'd have to be told how to go about doing that.
Thanks in advance for any helpful suggestions.
Laura Elliott
iMac Mac OS X (10.4.3)

Laura,
After your second plea, I will offer this course of action in an attempt to help you solve your problem.
First of all, make sure that you have backed up your important files.
I would recommend an Archive and Install of Tiger from your Tiger Installation disks followed by an installation of the Mac OS X 10.4.3 Update (Combo). Follow the Combo installation with Software Update.
I do not have a specific course of action for Adium, but it appears to be compatible with Tiger. You might check their support site for help.
The Help Viewer problem is but one small problem with your installation. If you are interested, you can read about it in Troubleshooting Help Viewer by Dr. Smoke. You can always refer to it later, if you still have problems after the steps that I have recommended.
Good Luck.
;~)

Static/Dynamic PDF problem with Forms 7.0

Hi all
I wonder if anyone has an answer to this?
I'm having problems with getting the instance manager to work correct in a couple of forms. It works great if I preview in Designer (8.1) or render through ES 8.2, but since we haven't upgraded our production environments yet, I'm stuck with Forms 7.0 there. And when I try to render with that, the form is simply not working as it should...
My guess is that Forms 7.0 chooses to make the form static instead of dynamic, but how to change this behaviour from the xdp? I've checked all the options of making it a dynamic xdp via Forms->Properties and checked just about everything I can come up with, but it's simply not working right now... anyone with ideas?
What I'm trying to do is to hide subforms depending on what the user has chosen in a different form (html), so that the user won't see irrelevant data. It's been done before but now it seems like Forms 7.0 wants to run the forms static always.
I've contacted Adobe support for a week ago but still haven't got anything from them leading me the right way. That's the reason I'm now asking here if anyone has any good idea...
A bit more information about what I've tried:
When I set min instances to 1, they are all visible but then they don't hide.
If I don't set minimum instances to 1, they don't display at all in forms 7.0 when choice Repeat subform for each item is set.
Using initialCount set to 1 do no good.
Doesn't matter if I use setInstances, addInstance or removeInstance as far as I've been able to see. I have also tried using presence = "hidden"; but with no luck.
If the prefill xml file is using appropriate xml syntax, it shows correct number of subforms but since I also wants to hide irrelevant subforms, it's not an acceptable solution.
Thanks in advance for any tips.

Yes. I could add an "Of course" but it has happened before that it's something that simple. Been scratching my head for at least 4 hours just today and at least the same amount of hours before so I think I've narrowed out all the simple stuff but I might have missed one..
Any more tips? One strange issue is the fact that the form behaves different if the prefill xml file is structured in different ways. Nothing to do with prefilling, just how the PDF itself behaves.

WD Java iView & Dynamic Navigation Problem

Hi,
I'm trying to use a WebDynpro Java iView in Dynamic Navigation but have the following display problem:
When I navigate to the page for which I've added the iView to the dynamic navigation, only the WebDynpro iView (from the navigation) is shown. You can see the page in its correct form being loaded but as soon as the navigation iView seems to be loaded/ing it replaces the full lower part of the screen (navigation and content panel).
If I use a plain URL iView in the dynamic navigation the behaviour is as expected.
But if I add a WebDynpro iView or even a page containing that iView I get the strange behaviour again.
I'm running NW04s SP7.
Any ideas?
Do I have to set some properties on the WebDynpro iView?
I've tried a couple of things but none did work so far.
Thanks & Regards
Markus

Hi Henrik,
Sorry for the late reply but I'm just back from vacation.
No, I have not found a solution. I decided to go for an integrated application instead (Main WD application that bundles navigation with other applications). That works but of course is not as "nice".
Have you come across some solution yet?
Kind Regards
Markus

Dynamic calc problem while calculation another dynamic calc member

I have 6 dimensions. Two of them are dense and are tagged as Accounts and Time. The dimension I am having problem with is called "Metrics". It was originally dense. But because the calc scripts were executing slowly, I decided to make "Metrics" a sparse dimension. Now the calc scripts are all executing pretty fast. However, I now have data issues. For example: Within Metrics, I have a hierarchy that looks as follows: Metrics Input.Amount ~ BW.YAG.EQU Dynamic Calc, Two Pass Pct.YAG.EQU Dynamic calc, Two Pass. Both of these Members have a member formula associated with them. "Pct.YAG.EQU" member refers to "BW.YAG.EQU" within it's member formula. Also, notice "Pct.YAG.EQU" comes after "BW.YAG.EQU" Any other thoughts. Really appreciate all your help in this matter. Thanks

I have 6 dimensions. Two of them are dense and are tagged as Accounts and Time.The dimension I am having problem with is called "Metrics". It was originally dense. But because the calc scripts were executing slowly, I decided to make "Metrics" a sparse dimension. Now the calc scripts are all executing pretty fast. However, I now have data issues.For example:Within Metrics, I have a hierarchy that looks as follows:Metrics Input.Amount ~ BW.YAG.EQU Dynamic Calc, Two Pass Pct.YAG.EQU Dynamic calc, Two Pass.Both of these Members have a member formula associated with them. "Pct.YAG.EQU" member refers to "BW.YAG.EQU" within it's member formula. Also, notice "Pct.YAG.EQU" comes after "BW.YAG.EQU"Any other thoughts.Really appreciate all your help in this matter.Thanks

A BUG? - dynamic combo problem

Similar Messages

Maybe you are looking for