A bug with flags and active view? Or is it a (bad) feature?..

As I mark an image in a folder view as flagged and then switch to a collection view and look on the same image, it's not flagged.
I expect, that information about marking the image as flagged remains on that image, not on a current active view.

It's as designed - Flags are local to a Folder/Collection.
>Or is it a (bad) feature?
It depends - some think it's a great and others hate it with a passion.

Similar Messages

  • Problem with installation and activation

    Hi, I have a problem with the installation of Adobe Muse.
    I had a free 30-days trial, when it was over I bought the product ($ 13 per month), 
    I installed the program again and I see the same window with the finished Trials
    and it requires a serial number and does not allow to enter the program.
    I installed the program on your PC wife without any problems, but I can not install it on a laptop.
    I have a laptop with Windows 8 operating system.
    What I've done:
    1. Uninstalled the free program,
    2. check the connection to the Internet,
    3. has installed a new program from the official website adobe.com,
    4. Remove the line for the activation of the hosts file and resave the file,
    5. turned off the brandmower,
    6. rebooted.
    I can't get support for a 3 days, is it the most terrible support I've ever seen? I dunno
    Please help me at [email protected]

    I guess this stuff helps me
    http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
    2014-08-07 20:07 GMT+07:00 Дмитрий Броский <[email protected]>:
    thanx
    >
    2014-08-07 18:18 GMT+07:00 Prabhakar.Kumar <[email protected]>:
        problem with installation and activation  created by Prabhakar.Kumar
    >> <https://forums.adobe.com/people/Prabhakar.Kumar> in *Help with using
    >> Adobe Muse CC* - View the full discussion
    >> <https://forums.adobe.com/message/6619532#6619532>
    >>

  • BPS - PS Retraction with Network and Activity

    Hi,
    In BPS I have a retraction function for PS at WBS Element level, and it's runs ok. Now, we will enhacement the planning level with network and activity. Is posible to retract the data to R/3 at this detail level (network and activity)?
    Thanks in advance.

    Hello Ivan,
    see SAP Note <a href="http://service.sap.com/sap/support/notes/503399">503399</a> and online documentation of function module
    UPB_CI_PUSHBACK_PR (transaction code SE37).
    Regards,
    Marc
    SAP Customer Solution Adoption (CSA)

  • Difference between WITH CLAUSE and INLINNE VIEW.

    Hi experts.
    Can anyone explain me the diff. between WITH CLAUSE and INLINNE VIEW with some example.
    Thanks in advance.

    user10314274 wrote:
    Hi experts.
    Can anyone explain me the diff. between WITH CLAUSE and INLINNE VIEW with some example.Generally, they are the same thing with a few minor differences.
    The WITH clause gives you a little more control on how the sub-queries are to be set up and used and allows the same subquery to be used multiple times without re-reading the data. Both simulate the functionality of views.
    I feel the WITH clause provides better strucure and maintainablility.
    The WITH clause aslo offesr two hints, INLINE and MATERIALIZE that can affect performance - both are used with the query in the IN clause. INLINE causes the subquery to be used as a subquery (inline view) while MATERIALIZE requests that the data be copied to a temporary table first. These hints are undocumented but are recognized by the user community.
    Edited by: riedelme on Jan 20, 2010 6:32 AM

  • Serious bugs in pdf and doc view

    Hello
    I have looked on the forum for other postings on this and have not found them if they exist. I have had a Pre Plus for about six weeks (Verizon) and overall love it and am glad I got it. Hoping some things like GPS get improved (which I know is most likely Verizon not Palm) but this bug is the first thing that has the potential to seriously hamper my experience with the phone:
    This week I took a work trip and before leaving added several (5-12) docs and pdfs to my Pre so I could access them on the fly during the trip when it was not possible or practical to use my laptop. This included some pdfs of directions and maps since the GPS is not up to snuff on the Verizon phone. Others were longer documents I needed to refer to when out in the field (ag related work visiting farms).
    Here's the problem, which applies equally to both doc and pdf view:
    -menu freezing: more than half the time the menu would freeze. In other words, not let me scroll. I could open documents on the screen but not scroll to see others further down.
    -doc and pdf file freezing: the file would often work fine for a few minutes, i.e. I could zoom, move across the page with the touch screen, change pages, etc. with no problem. But then after a few minutes they would often freeze, allowing me to see only what was currently on the screen. Shutting down the app and reopening only worked sometimes. I often had to do that many (5-7) times to get it to work again. Maybe rebooting would have worked but the Pre takes way way too long to boot up for that to be at all practical in the context I was using it in.
    Do these apps break down when too many docs or pdfs are loaded? I wouldn't consider a dozen too many so I am hoping the answer to that is no.
    I really hope Palm figures this out and can fix it. (I hope they allow for more zooming while they're at it.) In the meantime, are there alternative apps to use for docs and pdfs? I would pay a reasonable price for it if it exists. I have only found ebook readers so far.
    I also posted this on the precentral forum here
    http://forums.precentral.net/showthread.php?p=2467182#post2467182
    and you'll see that although most people report that they do not have this problem, a couple of other people apparently do.  For me it is a big problemwhich if not fixed will affect decisions on future phones...
    Thanks to anyone who can help.

    Did you re-try cloning with CCC after you had first re-trashed the items *directly from the 502 folder window* you obtained via Go to Folder?
    If you can see the items in the *Go To Folder> /.Trashes/502* window, then you apparently have *two different* .Trashes>502 folders. The items that keep re-appearing in your Trash icon window (the ones you did the GetInfo on) are in the HD>.Trashes>502 folder of your external drive. The Go to Folder command that I gave you is looking at the HD>.Trashes>502 folder on your startup drive. The Trash icon on the Dock may not look at that folder - trashed items on the startup drive normally go into Home>.Trash, a completely different place.

  • Making custom icons with transparency, and Cover View mode

    I tried making a new icon for a folder, and transparency doesn't seem to be treated the same in Leopard as it was in Tiger.
    Trying to get an object to float onscreen, without a square white background, I tried pasting the following onto the folder's icon at the top of a Get Info window:
    1. one layer of a .psd file
    2. the image Saved For Web in Photoshop (as a GIF), open in Photoshop
    3. the same image saved as a .png, opened in Photoshop
    4. a Photoshop EPS with a clipping path, opened in Photoshop
    5. the GIF file opened in Preview
    6. the .png file opened in Preview
    the results:
    1. the transparency surrounding the object comes out as white
    2. a speckled, purple image with a white background
    3. the same as 2
    4. the same as 1
    5 and 6: the transparency seems to work: the icon on the
    Get Info window loses its white background and the icon floats correctly on the Desktop. But in Cover Flow viewing mode, it completely disappears.
    What am I missing? By the way, the icons for the image files, in Cover Flow, show the white background for the .psd and .png files, but not for the .gif, where the transparency shows correctly. The .gif's icon seems to show the image with a white background in List and Icon view, but only the generic GIF icon in Column view. This all seems strange to me.

    I think you probably discovered the Cover Flow Bug. See this thread and the older one referenced in it as well:
    http://discussions.apple.com/thread.jspa?messageID=6846850
    As for the rest, well, at least you can copy something with a transparency out of Preview and paste it as an icon. Preview and Photoshop seem to me to not play well together with transparencies. I've gotten some VERY strange looking things, going back and forth between them with pngs and tiffs. Don't use gifs, or eps files, but I did notice that Finder does a rotten job coping with Photoshop's alpha channel (especially weird since once upon a time it worked fine, ditto for being able to show thumbs for eps files).
    Francine
    Francine
    Schwieder

  • Oracle equals_path condition NOT working with table and materialized view

    The user i am using is xdb with dba role.
    1.When i try to use the statement
    SELECT PATH FROM xdb.path_VIEW
    WHERE
    EQUALS_PATH(res, '/home/OE/PurchaseOrders/2002')=1
    the result is
    /home/OE/PurchaseOrders/2002
    2. When i drop the path_view and recreated it like materialized view with statement
    create MATERIALIZED view path_view as
    select /*+ ORDERED */ t2.path path, t.res res,
    xmltype.createxml(xdb.xdb_link_type(NULL, r2.xmldata.dispname, t.name,
    h.name, h.flags, h.parent_oid, h.child_oid),
    'http://xmlns.oracle.com/xdb/XDBStandard.xsd', 'LINK') link,
    t.resid
    from ( select xdb.all_path(9999) paths, value(p) res, p.sys_nc_oid$ resid,
    p.xmldata.dispname name
    from xdb.xdb$resource p
    where xdb.under_path(value(p), '/', 9999)=1 ) t,
    TABLE( cast (t.paths as xdb.path_array) ) t2,
    xdb.xdb$h_link h, xdb.xdb$resource r2
    where t2.parent_oid = h.parent_oid and t2.childname = h.name and
    t2.parent_oid = r2.sys_nc_oid$
    then the equals_path condition STOP working !!!
    3. The same experiment, but i recreate it like table
    create table path_view as .... using the rest of the statement ...
    Can someone help me to understand why equals_path is NOT working on table and materialized view !

    Thanks Jonah. I was under the impression that I already had it but seems like it has to be a direct priv - thru a role doesn't work.
    I granted the reqd privs and then it worked fine. Thx for your help!

  • Section header with portrait and landscape view

    My iBook project is being created so that it is available in both portrait and landscape view. This has been a tricky process since alot of content was distored when I created the layout using landscape and then attempted to adjust the portrait view after that. Currently, after many adjustments, I am attempting to remove the small "section number header" throughout the book at the very top of each chapter header in portrait mode. I was able to remove the the section number from the landscape mode, but can't seem to figure out how to do so with portrait mode (or if it is even possible?)
    Help and suggestions are greatly appreciated.

    Remember....layout in landscape - edit content in portrait.
    Did you try to select the section number header in the style drawer and remove it from the master layout?

  • Metadata created with OEM and OLAP2 views

    Why metadata created with OEM (v 9.2.0.1.0) aren't visible in OLAP2 views?
    Cubes are visible only in OLAP_CUBES, and OLAP1_CUBES views only.
    "Oracle9i Users Guide" says, that OLAP2 views shows metada created either with CWM2 and OEM, but i don't see the ones created with OEM.
    And second question - has that issue something to do with the problem that i don't see cubes with "cube viewer" (and any other OLAP API application like OracleBI Spreadsheet Add-In)? I got error message BIB-10701.
    I use Oracle 9.2.0.6.0 with OLAP option.
    Raf

    I know it is an old thread, but I thought I post the solution anyway ;-)
    I had the same problem and found that it is fixed in the July 2014 CU.

  • Compiler bug with generics and private inner classes

    There appears to be a bug in the sun java compiler. This problem was reported against eclipse and the developers their concluded that it must be a problem with javac.
    Idea also seems to compile the example below. I couldn't find a bug report in the sun bug database. Can somebody tell me if this is a bug in javac and if there is a bug report for it.
    https://bugs.eclipse.org/bugs/show_bug.cgi?id=185422
    public class Foo <T>{
    private T myT;
    public T getT() {
    return myT;
    public void setT(T aT) {
    myT = aT;
    public class Bar extends Foo<Bar.Baz> {
    public static void main(String[] args) {
    Bar myBar = new Bar();
    myBar.setT(new Baz());
    System.out.println(myBar.getT().toString());
    private static class Baz {
    @Override
    public String toString() {
    return "Baz";
    Eclipse compiles and runs the code even though the Baz inner class is private.
    javac reports:
    Bar.java:1: Bar.Baz has private access in Bar
    public class Bar extends Foo<Bar.Baz>
    ^
    1 error

    As I said in my original post its not just eclipse that thinks the code snippet is compilable. IntelliJ Idea also parses it without complaining. I haven't looked at the java language spec but intuitively I see no reason why the code should not compile. I don't think eclipse submitting bug reports to sun has anything to do with courage. I would guess they just couldn't be bothered.

  • Problem with code and design view

    When I try to have both the code and design view
    side by side in Dreamweaver CS4 on a PC -- I get the html code in both sections.
    How  do I see the layout while looking at the code?
    Thanks for help.
    Library Friend

    You've probably got View > Split Code checked.
    Click View > Code and Design

  • OS 2.1 Bug with CGAffineTransform and Views?

    Anyone get any complaints about shifting images in OS2.1? I use
    [[rootViewController view] addSubview:[holdemController view]];
    CGAffineTransform rotate = CGAffineTransformMakeRotation(1.57079633);
    rotate = CGAffineTransformTranslate (rotate, 80.0, 80.0);
    [[rootViewController view] setTransform:rotate];
    And it works fine on the previous OS 2.0 release, but reports have been that's broken in 2.1
    Anyone else seeing these complaints?

    I fixed it by setting the view to the center of the window rather than shifting it 80x80.
    eg: controller view center = window center
    It was a bug they fixed I'm sure in 2.1, but bug fixes are sometimes just as bad if not worse than the bugs themselves.
    C'est la vie.
    Hopefully they accelerate the review of my bug fix though, considering it was their change that broke it. I'm not holding my breath, however..

  • Strange problem with Outlets and Collection View Items

    This is a strange issue. I am using XCode 3.2.2 and I am building a Collection View. To do this I have a non-document based application that uses Core Data.
    *Collection View Item Class*
    I created a new class that inherits NSCollectionViewItem and built it to have an outlet to the Label.
    *Collection View Item NIB*
    I created a Empty NIB for my Collection View Item. To the NIB I added a Custom View object and set the Class Identity to NSBox. I then added a Label to the new NSBox. I changed the File Owner to the new class and connected the "view" outlet to the new NSBox and the Label to the label outlet.
    *Main Menu NIB*
    I added a new NSCollectionViewItem object to the Main Menu NIB and set the Class Identity to the new class mentioned above. I then set the NIB Name to the name of the NIB mentioned above. In the window I added a NSCollectionView then set its Item Prototype to the new NSCollectionViewItem object I just configured. This is the typical way to set up a collection view with its item in a different NIB.
    *Back to the problem*
    Everything seem to work well except that in the setRepresentativeObject in the Collection View Item class when it attempts to set the Label to a value. Nothing happens. When I check closely I find that the Label is coming back nil. It is properly linked. I deleted everything and rebuilt the collection view item and relinked everything without success.
    *How I made it work but not happy with it*
    I have finally made this work by simply putting the line "[self view];" just before I attempt to run "[label setStringValue:name];". If I remark out the "[self view];" the label returns nil. I have a note near the line to make it easier to spot. It seems that I should not need to access the superclass's "view" accessor just to access one of view's subviews. Is this a bug or have I written this wrong?
    The Collection View Item code is below. Any help is appreciated.
    Thanks,
    Rob
    #import <Cocoa/Cocoa.h>
    #import "PersonManagedObject.h"
    @interface PersonSelectionViewItem : NSCollectionViewItem {
    NSTextField *label;
    #pragma mark Finalizers
    - (void)dealloc;
    #pragma mark Outlets
    @property (nonatomic, assign) IBOutlet NSTextField *label;
    #pragma mark Instance Methods
    - (void)configureKeyValueObserving;
    - (void)removeKeyValueObserving;
    #pragma mark Overrides
    - (void)setRepresentedObject:(id)representedObject;
    - (void)observeValueForKeyPath:(NSString *)keyPath ofObject:(id)object change:(NSDictionary *)change context:(void *)context;
    @end
    #import "PersonSelectionViewItem.h"
    @implementation PersonSelectionViewItem
    #pragma mark Finalizers
    - (void)dealloc{
    [self removeKeyValueObserving];
    [super dealloc];
    #pragma mark Outlets
    @synthesize name;
    #pragma mark Instance Methods
    - (void)configureKeyValueObserving{
    PersonManagedObject *person = (PersonManagedObject *)[self representedObject];
    [person addObserver:self forKeyPath:@"lastNameFirstName" options:0 context:NULL];
    - (void)removeKeyValueObserving{
    PersonManagedObject *person = (PersonManagedObject *)[self representedObject];
    [person removeObserver:self forKeyPath:@"lastNameFirstName"];
    #pragma mark Overrides
    - (void)setRepresentedObject:(id)representedObject{
    [super setRepresentedObject:representedObject];
    NSString *personName = (NSString *)[representedObject valueForKey:@"lastNameFirstName"];
    [self view]; //<---Without this line the "label" variable 2 lines down will be nil.
    if (personName) {
    [label setStringValue:personName];
    [self configureKeyValueObserving];
    - (void)observeValueForKeyPath:(NSString *)keyPath ofObject:(id)object change:(NSDictionary *)change context:(void *)context{
    if ([keyPath isEqualToString:@"lastNameFirstName"]) {
    [[self label]setStringValue:[object valueForKey:@"lastNameFirstName"]];
    } else {
    [super observeValueForKeyPath:keyPath ofObject:object change:change context:context];
    @end

    I think you must be correct. I just ran into the problem again in yet another NIB. It was in the setRepresentedObject method. I simply put in the same line "\[self view\]" just before I needed to set the value of the view component and it worked again. If it is the same in other components I guess I just need to pay attention to it. Thanks for the information.
    Message was edited by: Cycles4Fun

  • Just got some bugs with Dock and Dashboard

    Hi!
    Been using my mac for 1 year now. Sudden some bugs just came by.
    I was using two widgets; "Ordbok" and "TriTrans".
    When I now try to use TriTrans I get this: http://bildr.no/view/75953 and I can't enter a search.
    When I try to use Ordbok i get this: http://bildr.no/view/75954
    I tried to make a new account just to see if I got the same problem and I sudden did. Then I went back to my main account and deleted the Dock, Desktop and Dashboard pref files (in Library/Preferences). Rebooted and tried again. Didn't work.
    When I made a new account I also noticed that the Dock had an icon with the "question mark" (this ting: ?). When I hovered it I got: "iMovie". Some icons to the left I got a working "iMovie HD". Where does the iMovie (wannabe) icon come from? (It was a new account).
    Anyways, someone now how to fix some of these?
    Thanks!
     MacBook   Mac OS X (10.4.9)   2 Ghz Intel Core Duo, 1 Gb RAM

    Ahh, that solves my widget problem. Thanks!
    Btw, someone who got any idea of the "question mark" icon I get in the dock when deleting the Dock config file or add new user? It says "iMovie" but beside it I got the "iMovie HD" icon, working.

  • Wierd bug with menus and subtitles on Intel mac

    I have found DVDSP4 will not let me place buttons on a menu!! The mouse clicks don't do anything in the menu viewer. I suspect some system incompatibility is this is also why I can't drop a subtitle into the subtitle streams either with DVDSP4 enev though it works fine on DVDSP3 on my G5 machine. Has anyone seen this strange bug before?
    I use a Wacom Intuos tablet, have a four-core Intel MacPro with 4GB of RAM, and use a LOT of graphic applications (FC5, Motion, Maya, Poser, Vue, Illustrator, Photoshop, and many molecular modeling packages)
    Has anyone seen this problem before (and is there a remedy)?
    Thanks
    tom hsu

    Do you have the Universal Version of DVD SP? I know you mentioned it is academic but did not recall if you have the proper one for the Intel Macs(?)

Maybe you are looking for