A/c cord

Is the A/C cord a standard 2 plug cord or does it have an adaptor (wall wort)?

the ac cord is 100% the same cable that my old cd player used and that my sony playstation2 use it can be bought in most electric stores and it works with both 110volt and 230volt

Similar Messages

  • Mini-DVI to video adapter connects with S-video cord

    I see the picture, but no sound coming out of the tv. Sound only comes out of the MacBook. Any ideas?

    Hi mrs.Kurle: The S-Video cord doesn't caryy an audio signal. To get audio to your TV you will need a cord from the Audio-Out/Headphone jack to the appropiate Audio input on your TV.
    Stedman

  • I have an older 8GB iPod Touch no longer supported by tech. It is locked up in "Restore" mode and fails to respond to 2-button reset. I get the apple logo and then it pos back to the cord and disc icon for restore. Any advice?

    I have an older 8GB black iPod Touch (no bluetooth) no longer supported by tech. It is "locked" in restore mode. When I do a 2 button reset I can get the Apple logo but then it pops back to the synch cord-and-music disc icon indicative of restore. Any advice?

    Hello honeycrisp70,
    For that error, check out the article below for additional troubleshooting to get it sorted out. If it continues then you may need to contact Apple support. 
    Resolve iOS update and restore errors
    http://support.apple.com/en-us/TS3694
    Check for hardware issues
    Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
    Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
    Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
    Confirm that your security software and settings are allowing communication between your device and update servers.
    If you still see the error message when you update or restore, contact Apple support.
    Regards,
    -Norm G.  

  • Does a Laptop Warranty Cover the Power Cord?

    Hi, I bought a HP Envy Touchsmart 15 and it is still covered by warranty.   However, I cannot find any support help online such as  the support chat which I find very odd since I just used it about a month ago when my battery died!  Where did all the support go?
    Anyways, when I plug in my laptop, the LED by the power port does not come on, and my laptop will not charge or turn on at all.  My battery is dead, but I know it works becasue it is less than a month old.  Since my laptop will not run on AC power even with the battery removed, I feel the power cord is the problem.
    I would really like to know if my warranty covers the power cord, and if so how do I contact HP, since there is absolutley no information when I go to "Contact Us" besides the consumer forums.
    I am a ECE student at UT in Austin, and every day I go without a laptop is hurting my grades.  So I need help ASAP

    Hi
    Yes, power cord, adapter are covered under limited warranty. HP would replace it for you if it's faulty.
    Check warranty: http://h10025.www1.hp.com/ewfrf/wc/weInput?cc=us&lc=en
    These are what I could find to help you:
    Contact HP: http://h22207.www2.hp.com/us-en/contact-hp
    Contact HP in Texas:
    http://m.hp.com/us/en/store-finder/find.do?type=authorized&searchType=LOCALAREA&displayedAddress=787...
    Regards
    Visruth
    ++Please click KUDOS / White thumb to say thanks
    ++Please click ACCEPT AS SOLUTION to help others, find this solution faster
    **I'm a Volunteer, I do not work for HP**

  • How do I get rid of error code 2001/2006? My phone is in recovery mode. I have tried several different cords, all USB ports, my macbook, and a friends PC. This is the second time my phone has done this, the first time it was an easy fix.

    I have an iPhone 4. It is in great condition, always protected. A couple months ago, it randomly went black and wouldn't turn on. I put it in recovery mode, plugged it in to my MacBook Pro and would get error code 2001 then I'd get error code 2006. I read some different forums and many people said to try using a different USB port and different cords. The last cord I tried, worked and my phone was back. Last night, my phone did the same exact thing. So I used the same method I used last time, however nothing has worked. I tried plugging it in to a PC and that didn't work either. This seems like a hopeless problem that's going to continue to happen. Any advice?

    Soooooooo.... You obviously need to restore the device
    It seems that you have tried several options to restore it. What I would do is leave it plugged it and hold down the Home button AND the Power button together till you see the white apple appears. Then let go of the Power button but continue to hold the home button. You should get the message in iTunes again saying that the iPhone needs to be restored. Hit OK then RESTORE.
    Hope this helps!!

  • I bought an external hard drive in June (this yr) and it suddenly stopped appearing on the desktop. Disk Utility could see it. It wasn't the cord - now that I've tried that, the ext won't even turn on. I need that data off the drive BADLY! Help!!??

    The drive stopped showing up consistently at first, then stopped all together. Disk Utilities could see it, verify it but not repair. I need it backed up. I took it to a local computer shop who tried a different cord. Nothing. When I got home, I read through several support forums dealing with this issue. One said I needed to zap my PRAM on my MacBook. I did so. Now the external won't even turn on! Any hope of getting the data off that drive? It is still under warranty but undoubtedly the firm will NOT attempt to back up the drive before issuing a new one. I downloaded something called TestDisk 6 that another forum suggested but no one offered any clue how to use it. I cannot figure the first thing to do with it! It appears to may be a Windows formatted program, anyway as most of the instructions end in the suffix .exe. I'm at a total loss...both personally as well as having already lost a complete week of business. Any suggestions would be appreciated but please note - I am NOT that computer literate. Just telling me to download something won't help me if I can't figure out what to do once it is downloaded. Also, taking this hard drive apart will void my warranty. Not that that is the biggest of my worries at this point but I wouldn't have the first clue anyway! I live in an area where we have something called Mac Authority in the mall and a Best Buy. Those are the only 2 connections to Mac-related stuff I have access to. Help!!! Please?

    If your external drive does not have an independent power supply, you may wish to consider a couple of lower-cost options before tossing the drive. Bus-powered drives have no external power source and must get all their power from the computer. They can exceed the computer's USB energy budget.
    Cheapest option:
    1 Meter USB 2.0 A to 5 Pin Mini B Cable - Auxiliary USB "Y" Power Design for external hard drives.
    This gets power from two of the computers USB porst sna can provide enough power to wake up an under-performaing bus-powered drive.
    If you don't have enough ports to use this, try the next cheapest option:
    Newer Technology 7 Port Hi-Speed USB 2.0 Hub with Power Adapter for Mac & PC
    Such a hub has a an independent power supply to make up for wahat the comptuer fails to provide.

  • I need a new power cord for my Mac book Pro its the T type mag connector. I don't need a Tech just a new cord. How do I buy one. The closest Aplle store is 75 miles away and I do not drive.

    I need a new power cord for my Mac book Pro its the T type mag connector. I don't need a Tech just a new cord. How do I buy one. The closest Aplle store is 75 miles away and I do not drive.

    Are you in the US? Order one from here:  http://store.apple.com/us/browse/home/shop_mac/mac_accessories/power?mco=MTM3NjU xNDg
    Or check out Best Buy.

  • How do I use GarageBand as a amp/speaker to listen to my Electronic Drum set? I have a MIDI-USB cord already but I can't figure out how to listen to my set through the software using my computer speakers?

    How do I use GarageBand as a amp/speaker to listen to my Electronic Drum set? I have a MIDI-USB cord already but I can't figure out how to listen to my set through the software using my computer speakers?

    If you want to listen to the sounds of your drum set, you should use an audio cable and connect it to the computer's line-in, then create a real instrument track.
    If you use a Midi/USB interface, you'll have to create a software instrument track and select one of GB's drumsets as the instrument. Hopefully your drumset's midi notes are mapped to the right sounds in GB.

  • After reading and resetting everything with Keyboard I still get blank white screen. The only way I can boot to Mavericks is unplug power cord, push and hold power button while plugging power cord in. Fans at full speed.

    After reading and resetting everything with Keyboard I still get blank white screen on 2nd? page of boot. The only way I can boot to Mavericks is unplug power cord, push and hold power button while plugging power cord in. Fans run at full speed, machine boots then runs normal except the dvdrw will not . The mid 2011 IMAC had the same problem with LION. I changed hard drives, formatted, and installed a clean install of latest os x mavericks. Any help would be greatly appreciated.
    EtreCheck version: 1.9.15 (52)
    Report generated August 30, 2014 at 6:56:41 PM EDT
    Hardware Information: ?
        iMac (21.5-inch, Mid 2011) (Verified)
        iMac - model: iMac12,1
        1 2.5 GHz Intel Core i5 CPU: 4 cores
        4 GB RAM
    Video Information: ?
        AMD Radeon HD 6750M - VRAM: 512 MB
            iMac 1920 x 1080
    System Software: ?
        OS X 10.9.4 (13E28) - Uptime: 0 days 0:16:53
    Disk Information: ?
        ST3120026AS disk0 : (120.03 GB)
        S.M.A.R.T. Status: Verified
            EFI (disk0s1) <not mounted>: 209.7 MB
            Untitled (disk0s2) / [Startup]: 119.17 GB (87.12 GB free)
            Recovery HD (disk0s3) <not mounted>: 650 MB
        HL-DT-STDVDRW  GA32N 
    USB Information: ?
        Apple Inc. FaceTime HD Camera (Built-in)
        CHICONY USB NetVista Full Width Keyboard
        Apple Inc. BRCM2046 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Computer, Inc. IR Receiver
        Apple Internal Memory Card Reader
    Thunderbolt Information: ?
        Apple Inc. thunderbolt_bus
    Gatekeeper: ?
        Anywhere
    Kernel Extensions: ?
        [loaded]    com.nvidia.CUDA (1.1.0) Support
        [loaded]    com.sophos.kext.sav (9.0.61 - SDK 10.7) Support
        [loaded]    com.sophos.nke.swi (9.0.53 - SDK 10.8) Support
    Startup Items: ?
        CUDA: Path: /System/Library/StartupItems/CUDA
        FanControlDaemon: Path: /Library/StartupItems/FanControlDaemon
    Launch Daemons: ?
        [loaded]    com.adobe.fpsaud.plist Support
        [running]    com.arcsoft.eservutil.plist Support
        [running]    com.bjango.istatmenusdaemon.plist Support
        [loaded]    com.oracle.java.Helper-Tool.plist Support
        [running]    com.sophos.autoupdate.plist Support
        [running]    com.sophos.configuration.plist Support
        [running]    com.sophos.intercheck.plist Support
        [running]    com.sophos.notification.plist Support
        [running]    com.sophos.scan.plist Support
        [running]    com.sophos.sxld.plist Support
        [running]    com.sophos.webd.plist Support
    Launch Agents: ?
        [running]    com.arcsoft.esinter.plist Support
        [running]    com.bjango.istatmenusagent.plist Support
        [loaded]    com.nvidia.CUDASoftwareUpdate.plist Support
        [loaded]    com.oracle.java.Java-Updater.plist Support
        [running]    com.sophos.uiserver.plist Support
    User Login Items: ?
        Macs Fan Control
        Firefox
    Internet Plug-ins: ?
        FlashPlayer-10.6: Version: 14.0.0.176 - SDK 10.6 Support
        Flash Player: Version: 14.0.0.176 - SDK 10.6 Support
        QuickTime Plugin: Version: 7.7.3
        JavaAppletPlugin: Version: Java 7 Update 67 Check version
        Default Browser: Version: 537 - SDK 10.9
    Audio Plug-ins: ?
        BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
        AirPlay: Version: 2.0 - SDK 10.9
        AppleAVBAudio: Version: 203.2 - SDK 10.9
        iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins: ?
        Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    3rd Party Preference Panes: ?
        CUDA Preferences  Support
        Fan Control  Support
        Flash Player  Support
        Java  Support
    Time Machine: ?
        Time Machine not configured!
    Top Processes by CPU: ?
             1%    WindowServer
             1%    fontd
             0%    firefox
             0%    SystemUIServer
             0%    SophosWebIntelligence
    Top Processes by Memory: ?
        229 MB    firefox
        156 MB    SophosScanD
        152 MB    InterCheck
        131 MB    com.apple.IconServicesAgent
        115 MB    SophosAntiVirus
    Virtual Memory Information: ?
        424 MB    Free RAM
        1.53 GB    Active RAM
        1.37 GB    Inactive RAM
        699 MB    Wired RAM
        1.26 GB    Page-ins
        0 B    Page-outs

    I'd start by getting rid of the following software responsible for these extensions.
    Kernel Extensions: ?
        [loaded]    com.nvidia.CUDA (1.1.0) Support
        [loaded]    com.sophos.kext.sav (9.0.61 - SDK 10.7) Support
        [loaded]    com.sophos.nke.swi (9.0.53 - SDK 10.8) Support
    Startup Items: ?
        CUDA: Path: /System/Library/StartupItems/CUDA
        FanControlDaemon: Path: /Library/StartupItems/FanControlDaemon
    Use the uninstaller provided with the Sophos software. You can uninstall CUDA via the preference pane. Be sure you remove the com.nvidia.CUDA extension which is located in the /System/Library/Extensions/ folder. Not sure if Fan Control has an uninstaller so you will have to do it manually:
    Uninstalling Software: The Basics
    Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash.  Applications may create preference files that are stored in the /Home/Library/Preferences/ folder.  Although they do nothing once you delete the associated application, they do take up some disk space.  If you want you can look for them in the above location and delete them, too.
    Some applications may install an uninstaller program that can be used to remove the application.  In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
    Some applications may install components in the /Home/Library/Applications Support/ folder.  You can also check there to see if the application has created a folder.  You can also delete the folder that's in the Applications Support folder.  Again, they don't do anything but take up disk space once the application is trashed.
    Some applications may install a startupitem or a Log In item.  Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder.  Log In Items are set in the Accounts preferences.  Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab.  Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
    Some software use startup daemons or agents that are a new feature of the OS.  Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
    If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term.  Unfortunately Spotlight will not look in certain folders by default.  You can modify Spotlight's behavior or use a third-party search utility, EasyFind, instead.
    Some applications install a receipt in the /Library/Receipts/ folder.  Usually with the same name as the program or the developer.  The item generally has a ".pkg" extension.  Be sure you also delete this item as some programs use it to determine if it's already installed.
    There are many utilities that can uninstall applications.  Here is a selection:
        1. AppZapper
        2. AppDelete
        3. Automaton
        4. Hazel
        5. AppCleaner
        6. CleanApp
        7. iTrash
        8. Amnesia
        9. Uninstaller
      10. Spring Cleaning
    For more information visit The XLab FAQs and read the FAQ on removing software.
    Be sure to remove your two Login Items. Finally do this:
    Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
    Reinstall Lion, Mountain Lion, or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • My Iphone won't show up in My Computer and it won't show up in Itunes. How do I fix this? It's just mine. My friends and her moms Iphones appear in both spots so it's not the cord. Help!

    . How do I fix this? It's just mine. My friends and her moms Iphones appear in both spots so it's not the cord. Help! I've tried uninstalling and redownloading Itunes. That didn't work. I've reset my iphone numerous times. Turned it off and back on. Restarted my computer. Deleted everything off of it and restored it from backup. It works on my friends computer perfectly fine but it won't work on mine. I've tried everythign that the Apple troubleshooter said to do and none of it worked. I need to get it figured out soon because I only have tonight.

    Refer to this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538

  • My ipod won't show up on my computer. I have another ipod touch, that works fine. What should I do? Do I need a different ipo usb cord for the nano?

    my ipod won't show up on my computer. I have another ipod touch, that works fine. What should I do? Do I need a different ipo usb cord for the nano?

    iTunes never displays the iPod in the left pane?
    iTunes is shipped with a "helper application" called the "iPod Service" that runs and is used by iTunes to communicate with the iPod device. This service may be disabled.
    If your system is Microsoft Windows XP and you are logged in as an Administrator:
    1. Quit iTunes and, if your iPod is currently connected to your computer, safely remove it using the system tray application to manage removable devices.
    2. Right click on "My Computer"
    3. Select "Manage"
    4. In the "Computer Management" window, left pane (tree view), follow this path:
    +Computer Management (local) > Services and Applications > Services+.
    5. In the right pane, scroll down to "iPod Service" and double click it.
    6. If the service is listed as "Disabled" and "Stopped," change to "Manual" and "Start" it. ("Manual" will cause it to start when iTunes starts and "Start" starts the service right now.)
    7. Close "Computer Management"
    8. Restart iTunes and wait for it to completely come up.
    9. Reconnect your iPod.
    Does your iPod show up in iTunes?

  • I cannot sych my ipad nor ipod . When I plug in either using the usb cord they do not show up in itunes. I have synched both of these before on this computer. i am running windows 8 on a dell one touch computer.

    When I plug in my iPAD or iPod to my Dell one touch computer using windows 8 to synch them they do not show up.
    I have synched them both recently on this computer with no problems. I have restarted everything ( computer , ipad , ipod ) multiple times
    and used different usb cords and ports but nothiing works.

    Hello abaneki,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Have a nice day,
    Mario

  • No Mouse or Keyboard entry..., have to replug the USB cord

    After replacing the HDD to 500GB and adding RAM (+ 2x500MB, total 1,25GB RAM) i now occasionaly have problems with mouse or keyboard: suddenly no response to mouse or keyboard and i need to replug the USB cord to get it working again.
    Also, after the upgrade, making use of large files, once in a while, i get the message to restart my computer!
    Any idea what can be wrong?
    G5 1,6GHz
    Tiger 10.4.11

    oh, gosh, sounds like a doozie. I think this was one of the problems (at least it was for my mom's G4 powerbook) and that's why we upgraded to 10.5, also try running diskwarrior, techtool maybe MacJanitor. Oh, and did you remember to push the cuda button inside after installing the ram and HD
    you could also try this: hold down CommandApple+oF -open firmware boot
    and at the basic screen type reset-nvram, then reset-all
    then mac-boot. This MAY solve your problem
    Good Luck
    John B

  • My Macbook Pro cannot connect to the internet using an ethernet cord.

    My Macbook Pro cannot connect to the internet using an ethernet cord. It was working fine for weeks, then all of a sudden just stopped. What could the problem be?

    Hi bean07670,
    If you are having an issue with the Ethernet connection on your MacBook Pro, you may find the following article helpful:
    Mac OS X: Troubleshooting a cable modem, DSL, or LAN Internet connection
    http://support.apple.com/kb/TS1317
    Regards,
    - Brenden

  • HT201897 Does a Mac Mini purchased in the USA require a power converter for operation in Europe or should I only purchase a different power cord for it?

    Does a Mac Mini purchased in the USA require a power converter to operate outside of the USA or can I simply purchase a different power cord for it?

    Depending on which European country (should their mains access plug/port shape vary) the
    cord set with correct ends on it has to match. You can buy a cord that plugs into the Mini
    where the factory cord goes, and the other end has one for the wall source shape. The wire
    for the application should be able to support 110~240VAC.
    With the cord or an accurate image in hand, you could either get a new cable to match both
    realities (mini + wall supply mains local) or an adapter (US/Standard to EU/Local) for just
    the head or input part of the original Apple cable. One plugs into the other, then into wall.
    If you have a new Mini with a small modular plug/port on the computer end of the power wire,
    it would have only two holes and no ground; the other end would have two prongs of equal
    shape and size. Not a polarized plug and not a grounded three-prong. To get a replacement
    power wire for the MINI to go from power source to the Mini is recommended, if you are going
    to be staying in one location for awhile. A Travel Kit that offers no electrical conversion but only
    the physical shape adapter kit, should a available in travel stores, airports; big box discount
    stores, computer and electronic stores. This page shows the cord end of the appliance shapes.
    The other end would be the mains shape for whichever country you are going to....
    http://www.signalandpower.com/European-Power-Cords/
    So to match the country or regional power mains type is a primary concern for obtaining the
    correct replacement cord to supply the Mini with local mains power. The end which plugs into
    the Mini is of a certain type (numbers for EU and elsewhere are published, see link + images)
    & the end that gets plugged into the mains or utility side, needs to match the local specification.
    The link to Apple, to contact for Support and Service information in prior post, should be able
    to help find a source for the local replacement type cord they'd sell local people with a Mini.
    Apple local sources offer replacements for this purpose; and for travelers, a second cord for
    a direct use (not adapter plugs) is a better bet. For those who only need a cord in two places.
    If you are traveling to Denmark, UK, Swiss or other EU countries require different adapters.
    Even places where the power itself may be somewhat similar. However your MINI has an
    automatic power supply that will conform to that energy standard, you only need to supply a
    correct non-transforming adapter. Simply a connection to adapt one shape to another.
    The general purpose travel kit that is not specialized to Apple power adapters, would have a
    plastic plug/adapter with the local pins on one side, and the US/standard two slots on the other.
    So, no circuitry nor any other change of electrical power inside this device would be required.
    http://www.signalandpower.com/2-Prong-Plug-Adapters/
    http://www.signalandpower.com/Convert-to-Europe-CEE-716-plug/
    http://www.signalandpower.com/Swiss-AC-Power-Cords/
    In other words, I believe my other post already covered this. On the ground on either end of the
    path, adapters are common and the Mini does not use proprietary electrical components IF you
    have one of the more recent shape aluminum models with the power supply built in. The older
    Mini has the power brick and two wires. A US/Standard plug adapter to EU/Local would work in
    either case, since all you'd do is plug the adapter plug into the local mains and the US plug into
    that one... I see these kinds of discards for as little as 25¢ in thrift stores in Alaska. Or you can
    buy a new one. Or you could get a complete cord with correct ends on it, for Mini + local mains.
    Hopefully this helps somewhat. The only info missing is which EU country or region is involved.
    Their shapes of plug are different, so the adapter end for local supply has to match their standard.
    Swiss, Denmark, UK, and others offer different shapes and so on.
    The Apple store in the location you are traveling should be able to supply you with a replacement
    cable for a modern MINI, that has the correct local mains end, and the correct Apple mini end on
    the opposite. Since the unit is automatically switching, the magic is done.
    Since I supplied a means to locate any number of Apple stores, authorized service providers &
    other Apple related vendors in my earlier reply: https://locate.apple.com/country you could contact
    any of them along your route in the City in whichever EU country, to find a local MINI power cable.
    In any event, I'm done...
    Good luck and happy trails...

  • Since the iOS7.0.2 update to my iPhone 4S, I can no longer choose use of my Bluetooth device if using the power cord to listen to MUSIC or answer my phone (choice of powercord as 'dock,' speaker,

    Since the iOS7.0.2 update to my iPhone 4S, I can no longer choose use of my Bluetooth device if using the power cord to listen to MUSIC or answer my phone (choice of powercord as 'dock,' speaker, & phone only).  Was this former-feature now an oversight??  I'd really appreciate having my Bluetooth once again listed as a choice of  audio option.  Especially considering the battery life is not what it was prior to this update, and requires recharging often.

    Sorry to tell you but unless you have a Retail Apple Store close by, they are the only ones I have found with all the adapters and accessories. I bought an extra lightning to usb adapter the other day to use in my truck. Good luck....

Maybe you are looking for