A/c doc not created and error msg "Business Area Miss-Match Check input"

Hi,
After creation of new Plant and Business area create a invoice , But my accounting document does't created and error msg show "Business Area Miss-Match Please Check Your Input". plz suggest me.
Regards,
Sohail

Dear Sohail Rahman,
Looks like the Business area has not been properly assigned.
Business area can be created for three combinations:
1. Business area by sales area
2. Business area by plant and division
3. Business area by plant and item division
In your case, check whether the business area is maintained for the combination of plant/division and plant/item division.
Hope this helps
Thanks
Murtuza

Similar Messages

Classic Po as follow on doc not created and could see Pr instead

Hi All,
Working with SRM 5.0 and ECC6.0 and Classic Scenario.
When I create a SC and assign the vendor with a Back end Contract , the follow on Document created is a PR instead of the expected PO.I have set the PR/Po option in Define the Objects in the Back end system.
System is picking the Condition type 01PB and could this be a reason?
No errors are seen.
Contract no can also be seen in the bbp_pd analysis.
What else needs to be done to create a Po in the Backend against a Back end Contract.
Thanks & Regards,
Nagarajan

we had also faced similar situation.
One reason can be
when SRM tries to create PO wrt contract it also checks
whether it can create a PR if not able to create PO
and it also checks whether the PR doc type is linked to the contract doc type
so as a test
create a PR doc type same as the PO doc type you have mentioned in attribute BSA
and link this PR doc type to contract doc type in ECC
BR
Dinesh

Itunes will not open and error msg states invalid characters

Itunes will not open nor can I unistall and re download the software. error message states "the Program files contain an invalid character"
All other programs, including quicktime run fine. Please advise.

A bit odd. That's usually an installation error. So if it is going off when you try to launch iTunes, it must be happening when the iTunes Setup Assistant runs (that involves running an installer routine).
What is the drive letter of the drive on which you have the iTunes Program files installed? If it's a high letter (higher than C: ), has the drive letter of that drive changed recently?
(Checking on this because a drive letter change out from under the program files can confuse the registry, and produce similar messages.)

"not enough memory to create CORp_PSLMalloc" error msg

Hello everybody,
I've been getting this error msg every time I try to render a 1920x1080 composition. It has particles and high-res photos, but that's about it, (no video).
I'm on a 2.4 GHz Intel Core 2 Duo with 2.5 GB 667 MHz DDR2 SDRAM... and error msg actually reads "not enough memory to create CORp_PSLMalloc" / (132 K requested, 51K available)
Can anybody please tell me if I'm not setting this render right? I'm using H.264 compression, with highest quality and frame frequency set to automatic. it's 1920x1080 16:9 with no sound...
Thank you very much for your help!

Mylenium,
Applied all masks in the photoshop files, but had the same problem, same error msg... it's strange indeed, i've been having problems with the user and the session (that i also don't quite figure out, this user has administrator rights but when I try to save files into a folder i get an error msg saying that the file is locked and i can't). Do you think it might have something to do with that? Like, AE trying to access the files but somehow having problems with that?
I'm on a Imac by the way...
Thanks a lot for your help!!
Paola

From pages on a mbp running 10.9.1, pages 5.0.1 does not sync automatically to iCloud after a doc is created and saved. I have rebooted and reset all devices.

From pages on a mbp running 10.9.1, pages 5.0.1 does not sync automatically to iCloud after a doc is created and saved. I have rebooted and reset all devices.

Welcome to the Apple Community.
What exactly do you mean by 'it doesn't save'.
Does this mean it doesn't save at all, doesn't save to the iCloud folder or doesn't sync with other the devices or iCloud.com.

I am having problems with creating my apple id. On the phone it is advising me that the ID is not created and then when i do it online it says that it has been created. Can you advise me on what to do please?

I am having problems with creating my apple id. On the phone it is advising me that the ID is not created and then when i do it online it says that it has been created. Can you advise me on what to do please?

Apple ID FAQ http://support.apple.com/kb/HE37

I installed iTunes update on my pc running windows vista and now it will not open. Error message MSVCR80.dll missing

I installed iTunes update on my pc running windows vista and now it will not open. Error message MSVCR80.dll missing???

First try updating to iTunes 11.1.5.5, using an installer downloaded from the Apple website:
http://www.apple.com/itunes/download/
If you still get the errors after that, try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Posting document not created (Pricing Error)

Hello Everybody,
I have a problem with a invoice. If i go to VF03, I can see a positing status as F Posting document not created (pricing error). The error message is showing as pricing error in item 000010 Message No. VF 073. Kindly help me how to unblock this invoice.
Your help much appreciated.
Regards,
Ravi

Hi,
I think problem is in VKOA settings. Please go to VF03. Press Shift + F11. System will lead to Revenue Account Determination analysis. Please check the settings.
Regards,
Jigar

Region is not created and also the item is not added.. Help me

Hi to all,
I want to create a region dynamically(in the sense using code). The following code is used but the thing is the region is not created and the item also not created. Using the object of the item, i set the prompt , this is also not working. Suppose this code is wrong let me know how to create regin and under this region an item.
the code is:
OAMessageComponentLayoutBean msgcmpntbean = (OAMessageComponentLayoutBean)createWebBean(pageContext,MESSAGE_COMPONENT_LAYOUT_BEAN);
OAMessageStyledTextBean msgstyledbean = (OAMessageStyledTextBean)pageContext.getWebBeanFactory().createWebBean(pageContext,MESSAGE_STYLED_TEXT_BEAN,OAWebBeanConstants.VARCHAR2_DATATYPE,"Login");
pageContext.getPageLayoutBean().addIndexedChild(msgcmpntbean);
msgcmpntbean.setRows(1);
msgcmpntbean.setColumns(3);
msgstyledbean.setPrompt("Login User : ");
Thanks in Advance

Hi,
you have created messagecomponentlayout and messageStyled text but you have not added messagestyled text as indexed child in messageComponentlayout....
Try this:
OAMessageComponentLayoutBean msgcmpntbean = (OAMessageComponentLayoutBean)createWebBean(pageContext,MESSAGE_COMPONENT_LAYOUT_BEAN);
OAMessageStyledTextBean msgstyledbean = (OAMessageStyledTextBean)pageContext.getWebBeanFactory().createWebBean(pageContext,MESSAGE_STYLED_TEXT_BEAN,OAWebBeanConstants.VARCHAR2_DATATYPE,"Login");
msgcmpntbean.addIndexedChild(msgstyledbean);
pageContext.getPageLayoutBean().addIndexedChild(msgcmpntbean);
msgcmpntbean.setRows(1);
msgcmpntbean.setColumns(3);
msgstyledbean.setPrompt("Login User : ");
Thanks,
Gaurav

TS3212 I had to re download Itunes, i get 2 errors; "failed to start MSVCR80.dll not found" and "error 7, windows error 126"

iTunes will now download because of 2 errors; "failed to start MSVCR80.dll not found" and "error 7, windows error 126" using microsoft.

Click here and follow the instructions.
(98918)

Hello, just wondering how i can fix my itunes when i keep getting these msges, MSVCR80.dll was not found and error 7 (windows error 126). can anybody help. cheers.

hello, just wondering how i can fix my itunes when i keep getting these msges, MSVCR80.dll was not found and error 7 (windows error 126). can anybody help. cheers.

See Troubleshooting issues with iTunes for Windows updates.
tt2

I downloaded the Acrobat 11 trial and I can open the product. During the install it deleted the existing print driver and did not install a new print driver so I CAN Not create and print pdf files.

I downloaded the Acrobat 11 trial and I can open the product. During the install it deleted the existing print driver and did not install a new print driver so I CAN Not create and print pdf files.

What OS? Have you tried a repair and updates from the HELP menu? The updates may be the key.

I have installed uninstalled and reinstalled itunes but am unable to activate...receiving message that MSVCR80.dll is not installed and error 7 (windows error126) is a problem. Any takers?

I have installed, uninstalled and reinstalled itunes 11 but have been unable to activate the program. I keep receiving the message that MSVCER80.dll is not installed, and error 7 (windows error126 is a problem). Any takers?

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

New Media Encoder Error: video and/or audio filters are missing...

My colleague reported this error popup window while using Adobe Media Encoder CC (up-to-date):
"video and/or audio filters are missing and the rendered output may not match the original"
I've been seeing similar errors the past few days. I can't remember if the wording was the same in the errors I saw, but the circumstances were the same.
I've never seen this popup error before the most recent CC update.
Some background info:
I queued up multiple Premiere Pro pproj files as usual from within Premiere
without rebooting or deleting any cache or temp files or anything, I start the queue
I have no special plugins installed in Premiere. Vanilla CC install.
Windows 7, 64-bit
This error doesn't tell me what audio/video filter(s) are missing. The output files, once I dismiss this warning, are perfect.
The major problem: It stops the queue dead in it's tracks. Sure, it might seem handy to stop and give you a warning, but when it's a false report and there's nothing wrong, it's killing us, because we queue up multiple files for encoding overnight, and we're not here to get the popups.
What is likely causing this? Is it a bug that this is appearing so frequently? Has anyone else experienced this besides my colleague and I?
Thanks!

Update for anyone experiencing this issue:
We are still investigating the cause of the issue and would really like your help tracking it down. If you run in to it I would be happy to jump on the phone with you and preferably do a screenshare as well. If you want to run some tests for me, this is what may help us track it down:
0. Please make sure you are updated to the latest version of Premiere Pro and AME, which at this time are Premiere Pro 7.2.1 and AME 7.2.
1. Simplify the project. Create a copy of the project and eliminate anything in the project that isn't related to the sequence(s) you are exporting. Then run the encode again. If it still occurs, move to the next step. If it doesn't occur any more, repeat step one and only remove half of the unused items (sorry, this is giong to be a manual process). Rinse, repeat.
2. Open your sequence in Premiere and press Cmd/Ctrl + A to select all clips in your sequence. Right click and select Remove All Effects. Export again. No repro? Go to step 4. If it still repros, go to step 4.
3. Make all the media offline. Export again. No repro? Go to step 4. Repro? Go to step 5.
4. Send me a message with as much detail as possible. Even better would be if you could provide me a copy of your project file.
Your help in tracking this issue down is greatly appreciated. Thank you.

Created a custom button bar and pull-down menus are missing

created a custom button bar and pull-down menus are missing.
I want pull-down menus of 'action', 'edit', 'query', 'block','record', 'field', 'window' and 'help' to display.
What property setting or other item do I need to change?
Thank you for your help.

You could try this, I haven't used it before so I'm not sure if it's what you're looking for but it's worth a shot if you can't get anything else to work.
http://web.mac.com/ijasonwhite/iwebunlimited/TipsBlog/Entries/2008/12/29_Drop_Down_Navigation_iniWeb.html
Hope this helps!
Josh

A/c doc not created and error msg "Business Area Miss-Match Check input"

Similar Messages

Maybe you are looking for