A/c rxcprod belongs to which group

Hello,
SUN SOLARIS 2.6 OC 4.0 oracle 8.1.6.2
I am attempting to install OC 4.0. I created a user account in unix called rxcprod. as per the manual it says that PSUB runs under a special privileged account called rxcprod.
1. What group does account rxcprod come under?
2. What are the special privileges that the manual refers to?
3. rxcprod -sh - PSUB owner (what does PSUB owner mean?)
Anybody can help?
Thanks
Cecil

Cecil,
This is a Oracle Clinical user account like others (ops$....). But it has far more serious priv then other account. It is owner of PSUB deamon which execute commands on behalf of other users even on the remote host using remsh command without needing the password of these users. It has privs of RXCLIN_MOD, execute privs on DBMS_PIPE.
See also man pages of remsh (security part) for the requirement on this account.
I hope this helps.
-NP
Hello,
SUN SOLARIS 2.6 OC 4.0 oracle 8.1.6.2
I am attempting to install OC 4.0. I created a user account in unix called rxcprod. as per the manual it says that PSUB runs under a special privileged account called rxcprod.
1. What group does account rxcprod come under?
2. What are the special privileges that the manual refers to?
3. rxcprod -sh - PSUB owner (what does PSUB owner mean?)
Anybody can help?
Thanks
Cecil

Similar Messages

Which group a contact belongs in

I'm not sure if this question belongs here so apologies up front if it doesn't. It's really a cross product question. I have set up groups in my contact list. I noticed recently that if I add a new contact and don't add it to a group it stays in All Contacts which makes sense. However, I set up groups so I did not have to show All Contacts. When I view a contact, is there a way to see which group it belongs in? If I'm viewing All Contacts, there's no way for me to see if I've already added that contact to a group or if I need to.
Thanks.

Hold down the option key. The groups will highlight in yellow.

How can I get to which group belongs users

Can I write sql which get to which groups belongs users in Oracle Portal 3.0.9.

Hi,
select group_id from wwsec_flat$
where person_id in (select id from wwsec_person$
where user_name = '<user name>')
Thanks,
Sharmila

HT2486 Is it possible to notate in each Adress Book Card which Groups it belongs to?

It would be helpful to know ofr each Address Book entry which Groups they belong to. Does anyone know how to notate on each entry which Groups they belong to?

idip31 said on http://www.reddit.com/r/apple/comments/2juazy/can_you_nickname_your_credit_cards _associated/ that "You cannot change the name of the card to a nick name. And you can't change the design, it will be whatever is associated to it by ApplePay/Bank".
Hopefully a feature like this will be added in a future update of the stock application.

How can I see in which Group the workspace has been created ?

Hi,
The BeehiveOnline Tutorial on slide 7 shows that Workspaces are created within a Group.
Also the Group Administration screen suggests this as I can indicate that user ABC gets the role 'Workspace Creator' in one Group but same user ABC does not get the role 'Workspace Creator' in another Group. (what else is the purpose of this role within Group Administration)
But when I created my workspace, the system did not ask in which Group I wanted it to be created, neither can I see in the Settings of the new Workspace to which Group it belongs.
Can you please help ?
Thanks,
Peter

Peter,
Workspaces and groups can be confusing - apologies that it was not clear.
Perhaps some background as to why I described it that way may help.
BeehiveOnline relies on groups to be self-sufficient - if you are in one group your world of available participants is that group and that group alone. So if you want to create a new workspace and add users they can only be drawn from that group. - hence the workspaces within a group setup. However, if you are in multiple groups then the linkage gets broken as you could add members to a workspace from different groups - if you needed many group to share a repository of read-only info for instance. This is in wide use on BeehiveOnline. Read and Write access is more of a problem as if anyone updates a document or creates one their id will be attached to it and if they are in a group you as a workspace member cannot see it will cause confusion.
So workspaces are only group restricted if there is only one group. If you have multiple groups you have more scope but have to exercise more care.
Hope that explains it.
Phil

"Domain Users" group in Active Directory does not belong to any Group Membership in LC

Active Directory user belonging to "Domain Users" group does not belong to any Group Membership in LC, why does it not belong to "Domain Users" group?
Any way to correct this issue, without changing group membership on AD side?
If Active Directory user is member of "Domain Admins" or "Users" then these show same group membership in LC.
Thanks.

If you want to use the Domain Users group for the purpose of representing all the users then you can use the "All principals in domain xxx" group which is created by UM.
Coming back to Domain Users group. For determining group membership in AD UM uses "member" attribute of the group object. "Domain Users" group is treated differently by AD. It is the default primary group for all the users and normally members of the primary group are not specified using the member attribute.So when we sync the data from AD "Domain Users" membership does not get completed.

Mac OS X v10.7 Lion How to Tell Which Groups an Address Book Entry Is In?

Under Snow Leopard's address book, I could press the Option key and it would highlight which groups the selected address book entry was in. How do I do that with Lion's address book?

Hey Mr. Picasso,
You need to be in "Groups" View in Address Book. Hit Command-3 to get there.
Then click (highlight) an address book entry on the right hand page.
Next, hit the Option key. The groups that the entry belongs to will highlight in blue on the left hand page.
BTW, to me the "highlight in blue text" is badly chosen by Apple, 'cause it is hardly discernable from the other "black on white" texts. No way to change it, AFAIK. The old "yellow highlight" worked much better, IMHO.
Regards, Peter

User belonging to multiple groups

Hi,
If a user belongs to multiple workgroups, Podcast capture should ask him in wich blog he wants to publish its sequence... but it doesn't seem to work.
So my question is : how to deal with that ?
Thanks for your help,
Nicolas

Hi
I know only 2 ways to add some dynamic: posting to user's blog, which supposes to consider that there is only one user who is able to post, otherwise to duplicate workflows and change the target group in it ($$Group Short Name$$ replaced by custom properties or if posted through webUI defined by new field, but it's reliability depends of the human factor..).
In addition, i may ask you what do you mean by "it doesn't seem to work"..? Is Pc Capture supposed to work this way and ask at any moment to which group's blog the podcast needs to be sent when a user belongs to multiple groups ? That would be a terrific news, but i guess they would have announced it..
ju
Message was edited by: JulienC

Any Simple Way to check wheter the user is belongs to SharePoint Group in Client object model

Hi All,
Generally we follow these steps to check whether user belongs to this perticular group:
1.Get the "Group" object from the Group Collection based on the group name
2.Get all UserCollection from the "Group" object
3.Take a loop and check with each user object (eg User.ID="777473844")
I am thinking this is time taking process( if group has more than 100 members).
Do we have any shortway to check whether user is belongs to this perticular SharePoint Group?
Thanks in Advance!
Thanks,
Mahesh Yamana
Mahesh@SharepointSolutions

Hi Mahesh,
Below is a CSOM JS code to check whether a user belongs to a group. We get the current user object, and then the list of Groups which the user is part of. And then check if the required group is present or not in the collection.
function retrieveWebSite() {
var clientContext = new SP.ClientContext.get_current();
this.oWebsite = clientContext.get_web();
this.oCurrentUser = this.oWebsite.get_currentUser();
this.oUserGroups = this.oCurrentUser.get_groups();
clientContext.load(this.oUserGroups);
clientContext.executeQueryAsync(
Function.createDelegate(this, this.onQuerySucceeded),
Function.createDelegate(this, this.onQueryFailed)
function onQuerySucceeded(sender, args) {
var Group1 = "Group Name One";
var Group2 = "Group Name Two";
var flag = false;
var iCount = this.oUserGroups.get_count();
for(var i=0; i<iCount; i++)
oGroup = this.oUserGroups.getItemAtIndex(i);
if(oGroup.get_title() != Group1 && oGroup.get_title() != Group2)
flag=true;
else
flag=false; break;
if(flag == true)
//Write your logic here
function onQueryFailed(sender, args) {
alert('Request failed. ' + args.get_message() +
'\n' + args.get_stackTrace());
Ram Prasad Meenavalli | MCITP | MCTS SharePoint | MCPD SharePoint | http://www.spdeveloper.co.in

Don't belong to a Group & get "No VPN shared secret was provided"

I have an RSA SecurID hardware token & can connect to my company's Cisco IPsec VPN using the Cisco VPN client on my laptop.
I'd like to connect to the company VPN via my iPhone 3G 3.0 so I created a VPN account on my iPhone.
According to http://support.apple.com/kb/HT1288 ("iPhone and iPod touch: Supported protocols for VPN"), the details in the VPN configuration on my laptop should also work on my iPhone.
I've therefore filled in the Description, Server IP address & Account fields & left the Password field blank so I'll be prompted for my PIN number & the number on the SecurID token.
We only use RSA SecurID hardware tokens so "Use Certificate" is off.
I do not belong to a group - I verified this by checking my Group Memberships in RSA Authentication Manager - so the Group Name & Secret fields in the iPhone VPN client configuration screen are both left blank.
When I then turn on the VPN, I get "No VPN shared secret was provided." which is not surprising as I don't belong to a group so I don't have a group secret to share.
Does anyone know how to resolve this?
Thanks.

I get the same error (No VPN shared secret was provided)using an IPhone Configuration Utility XML configuration file that sets my vpn to ipsec with certs.
Specs
ASA 8.2.11
Iphone 3.1
I can connect via Cisco Desktop Client using same certs
Anyone seen this error or even better fixed it? Also wondering if anyone has a sample XML configuration file for IPSEC VPN With CERTS or similiar
Thanks

Which group is a user member of ?

Hi
I am using Iplanet 5.1. I have searched almost everywhere
for a solution for this :
How du you see which groups a user is member of ?
Hope one of you have the solution
Vh.
Finn

Dynamic group is not a group (I mean entry containing list of members) but an entry containing one ldap filter.
e.g. Mygroup (dynamic group) "contains" all users in Tokyo. ldap filter is (l=tokyo).
That's it. No member. Nothing but ldap filter.
As a result, if you want ot check ALL groups user belongs to, you will have to:
1 - retrieve user's DN.
2 - search all groups where uniquemember=[DN you retrieved]
3 - retrieve all ldap filters describing dynamic groups.
4 - check for each of them, if filter applies to user's entry. This can be done by either building the static group matching dynamic description and then compare uniquemember (can be VERY heavy) or by comparing filter against user's entry. Is location (l) = tokyo for this user ?
As you may understand, managing dynamic groups is not compatible with your request that is to retrieve all groups user belongs to. This is why - I suppose - version 5.x brings "roles". With roles, this information is stored within user's entry. This is easier for you. On the other hand, this is heavier if your goal is to retrieve all members of a given role. Nothing is perfect.
You do have to understand your goal and how you will manage it before deciding if you will use static groups, dynamic groups or roles (or most likelly, all of these features).
All have pros and cons.
Christian

Java portlet customization depending user belongs an OID group

Hi
I have developped a Java portlet with a customization display, depending user belongs a specific OID group or not.
I used a preparedStatement to call the wwsec_api.is_user_in_group PL/SQL procedure.
My problem is that it seems that OID does not close connections as our portal falls after 2 or 3 days when I install this portlet in production.
Therefore I wonder if there is a bug in the API wwsec_api.is_user_in_group (if it close OID connection after returning the boolean result).
Is there a more efficient way in a Java portlet to check if a user belongs an OID group ?
Is there a bug in wwsec_api.is_user_in_group ?
Thanks for your help,
Best Regards,
Jean-Christophe

Hi Rajiv,
I tried out the following code for getting the database reference which I got from some posts on net.
tcDataProvider db;
                    tcUtilityFactory tcu;
                    ConfigurationClient.ComplexSetting config = ConfigurationClient.getComplexSettingByPath("Discovery.CoreServer");
                    final Hashtable env2 = config.getAllSettings();
                    tcu = new tcUtilityFactory(env2, "xelsysadm","Password");
                    tcBaseUtility mBaseUtil = (tcBaseUtility) tcu.getUtility("Thor.API.Base.tcUtilityOperationsIntf");
                    DBReference=mBaseUtil.getDataBase();
But when I execute the code, I get an error :
Error while getting utility Thor.API.Base.tcUtilityOperationsIntf[Ljava.lang.StackTraceElement;@619eeaaThis must be at the getUtility method call.
Can you please guide me as to what I might be doing wrong here?
Thanks,
$id

Google Contacts API 2.0: Add option to select which groups are synced

This has been a requested issue for quite some time now:
*1) Add an option to control what Google Contact groups are synced in ITunes*
Currently, if you sync to Google Contacts, iTunes will pull in EVERY contact from your Google Contact list. That includes those contacts filed under "Suggested Contacts", which lists contacts you email on a frequent basis. The workaround for this is to delete your Suggested contacts every time you sync your iPhone, or risk the issue of having hundreds of new junk contacts in your iPhone.
I understand that there was an issue in the Google API before, the issue being that there was no way to distinguish between which group the contacts were coming from. That issue is now gone, it was corrected in the update of the Google API to 2.0 on December 12th. Now, when syncing, the ability to distinguish which groups the contacts exist in is there. Below is the documentation of those changes:
http://code.google.com/apis/contacts/docs/2.0/developers_guide.html
With Google's update, the iTunes implementation of syncing Google Contacts can allow the selection of only specific groups to sync.
As said before, this is basic functionality that has been requested by many for a long time (search Google if you don't believe me), and I hope and pray that the wonderful iTunes/iPhone gods will bestow upon us the ability to select Google Contact groups in the near future. Are there any plans to add this functionality? If so, when might we expect an update?

Hello Blindbug.
I do apologize. But this is a user to user community. And no one here knows when or if certain features or products will be released unless there has already been a public announcement by that company released for everyone to view and read.
If I can be so kind as to refer you to iPhone feedback below. And you may wish to also spend some time going to google's site and submitting feedback as well.
http://www.apple.com/feedback/iphone.html

Final Cut Server Info Window - Which Group Controls the information?

I have been searching the forums and have found similar postings but none that solve what i am seeing and wondering if it is my database (been configuring quite a bit and may have messed something up) or just an oversight of the wrong metadata group. I did notice that it happened when shortly after i needed to recover from a backed up version of the database.
Here is my issue. When you look at the main assets pane of final cut server you see all of the thumbnails which is great. Double clicking an asset bring up what i refer to as the info window for that asset. in configuration i have inadvertently removed the thumbnail representation of the asset and all of the data underneath from there, except for one custom metadata field. the productions still have the thumbnail, but have also lost a significant amount of data under the thumbnail.
I would like to put some of the info back but do not know which group to modify. I have looked inside the metadata groups from this post to see if it would help but no luck:
<http://discussions.apple.com/thread.jspa?messageID=9136299&#9136299>
thought it was the AssetTilesView that affected that window's info on that pane. I looked inside that group but many fields in are listed in that configuration list when brought up. like i mentioned above, only one is listed when viewed outside the configuration window what the client app would see.
The only group that i have been modifying as per my knowledge was the asset_search group to add custom fields i made to the search criteria.
hope this is clear. i am tired and a little exhausted from racking my brain. thanks in advance.

i figured it out. it was an error between the chair and the keybord..
for those that stumble on this...
aside from the order the groups show up in the list Asset, P2.. ect.
the display priority affects the layout of the variables on the info page. so if the window layout looks odd (no thumbnail, or missing metadata) check the display priority.

How Can I find out in which groups a contact is?

I have few groups in my contacts. However, I want to know in which group each of my contacts are and or if they have been allocated to any of the groups.
Thanks,
diana

If you are still in the development stage you can either put your libraries in 'user.lib' or go to Tools>Options>Paths>VI Search Path> and add your directory of libraries with a \* at the end (NB. You need to unselect 'Use default' first).
I think this should work - let me know if not please.
Kim
NB. The above is based on LV 6.0

A/c rxcprod belongs to which group

Similar Messages

Maybe you are looking for