A Camcorder that's not on the "Qualified Devices List.." Still work?

I everyone. I own a Sony DCR-TRV-250 Digital 8 Hanycam Camcorder and I am looking into Final Cut Express HD, but I noticed that my camcorder is not on the qualified devices list. For those of you who know about this, is there a possibility that my camcorder may still work? Your Support Is *GREATLY* appreciated! Thanks so much.

To use a camera with FCE, it needs to be DV and have a FireWire connection. Your TRV250 does both. Digital8 is a Sony thing, but under the covers it is a DV codec recording on a Digital8 cassette. There are some technical differences in the tape transport speed and how the magnetic recording is made on the tape compared to miniDV tapes, but the codec itself is DV, and the output via the FireWire connection is also DV. So, it should work with FCE, and iMovie too.
The only way to know for sure is to give it a try. Find your local Apple store and take your camera there & try it. That's the same advice we'd give anyone, regarding any camera.
Oh, and by the way, I noticed that your profile says you are running 10.0.x - for FCE-HD you need at least 10.4.6 and QT 7.0.4 - check the full specs here.

Similar Messages

New iPad is not on the authorised devices list

Every thing seems to be working as it should. I can download from the store etc. but, my new iPad Air is not shown on the authorised devices list in my account.
Is there something I need to do to get it recognised?
Cheers.

Same for me, Diamond White. Everything seems to work, but my new iPad Air isn't showing up in the list.
Thanks for suggestions, King_Penguin. Alas, I tried all of those except iTunes Match (don't want or need) and still no joy getting the device to appear in the list. My main PC is there along with my iPad 3.
Regards.

How to recover from D recovery drive that is not in the recovery point list

I got problem when I created a recovery point, this removed previous created or HP manufactory recovery.
then I use other tool make this recovery disk back. now because it is not in the recovery point, even though I can see the driver D, recovery is not work, what it said is access denied.
another problem is I alrerady update my notebook to Windows 8.1 Pro. would that default recovery back to Windows 8.1 Pro?

When requesting assistance, please provide the complete model name and product number (p/n) of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
The above requested information can be found on the bottom of your computer, inside the battery compartment or on the startup BIOS screen. Please see How Do I Find My Model Number or Product Number? for more assistance locating this information. DO NOT include your serial number. Please enter the model/product information into HP's Online Consumer Support page and post it here for our review.
The original factory installed operating system is what will be recovered to your computer, when you use the HP provided methods of recovering your computer. Try using the "F" key, associated with the HP Recover Manager, at power on. You may also try marking the "D:\HP Recovery" partition as active in the Windows Disk Management Console and rebooting the computer.
If the above didn't work and you didn't create your HP Recovery Media when you first setup your computer, please contact official HP Customer Support in your country / region, via the HP Worldwide Support Portal, to see if HP Recovery Media is available for your computer. Software may not be covered by the warranty and there may be a charge for the HP Recovery Media.
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

My tablet is not on the supported device list, but meets requirements to run. how to install?

I have a supper pad 3 tablet. The android market does not recognise my tablet, but i have installed other apps directly from the developer and bypass the market. Can i download firefox as a file and install directly to my tablet?

It is not compatible. According to http://www.androidtabletspcs.com/10-LCD-Panel-Touch-Screen-1024-768-Android-2-2-Tablet-PC-B-pad103.html the device has an arm11 cpu which supports the armv6 instruction set. Firefox requires a cpu that supports armv7.

Items on ipod that do not show up on Device list, want to remove them

A pod cast and a video I downloaded from itunes and copied to my ipod are on my ipod but when I connect the ipod they do not show up on the lists of items on the device. I can see and play them on the ipod, but cannot find them on the list of items on the ipod when I connect to itunes...
I want to remove them and can't
baffled....

They should be able to help you. You must have the iPod set to manually managed. Podcasts generally work best when set to auto-sync.
To find these files it is easiest to create a smart playlist on the iPod itself with the right rules to find the files while it is set to manually manage. To delete files through a smart playlist you will need to hold the "Alt" key on the keyboard then hit the Delete key. Atl/Delete is for Mac but may be a combination of Delete and Shift, Control, or Windows key on Windows PCs.

RV120W: The user attempted to connect using a dial-in medium that did not match the restricted dial-in media

I am trying to configure a Cisco RV120W wireless using RADIUS. The IAS server is Windows 2003. The wireless client can’t access the wireless. The ISA server keeps getting this error: Event Type: Warning Event Source: IAS Event Category: None Event ID: 2 User: N/A Computer: DEVICES1 Description: User ntdomain\blin was denied access. Fully-Qualified-User-Name = chicagotech.org/Users/Bob Lin NAS-IP-Address = 10.0.30.102 NAS-Identifier = Called-Station-Identifier = Calling-Station-Identifier = Client-Friendly-Name = RV102-Domain Client-IP-Address = 10.0.30.102 NAS-Port-Type = NAS-Port = Proxy-Policy-Name = Use Windows authentication for all users Authentication-Provider = Windows Authentication-Server = Policy-Name = CBG-All Authentication-Type = EAP EAP-Type = Reason-Code = 70 Reason = The user attempted to connect using a dial-in medium that did not match the restricted dial-in media. Check the dial-in constraints for the matching remote access policy. The public wireless and WPA2 work fine. Other Cisco 1240 wireless works fine with this event: Event Type: Information Event Source: IAS Event Category: None Event ID: 1 Date: 10/18/2013 Time: 1:33:19 PM User: N/A Computer: DEVICES1 Description: User blin was granted access. Fully-Qualified-User-Name = chicagotech.org/Users/Bob Lin NAS-IP-Address = 10.0.20.103 NAS-Identifier = WLC2504 Client-Friendly-Name = WLC2504 Client-IP-Address = 10.0.20.103 Calling-Station-Identifier = 90-18-7c-e6-95-aa NAS-Port-Type = Wireless - IEEE 802.11 NAS-Port = 1 Proxy-Policy-Name = Use Windows authentication for all users Authentication-Provider = Windows Authentication-Server = Policy-Name = CBG-All Authentication-Type = PEAP EAP-Type = Secured password (EAP-MSCHAP v2) Can you help?

Dear Customer,
Thank you for reaching the Small Business Support Community.
The RADIUS configuration settings are intended to authenticate the wireless clients attempting to connect through a SSID and if this is the problem you have, I first suggest you to check on the RADIUS server IP address (Security>RADIUS Server), make sure it is reachable, and the authentication port number used by this server to send traffic and the shared key used to authenticate to the server which must match on both sides. If all that is good, try using WAP Enterprise as the wireless security method and not WAP2 Enterprise.
If the problem persits I then first suggest to to make sure you run the latest firmware release version 1.0.5.6;
http://software.cisco.com/download/release.html?mdfid=282981372&flowid=796&softwareid=282487380&release=1.0.5.6&relind=AVAILABLE&rellifecycle=&reltype=latest
Then contact support if the problem persists; (the "dial-in medium" part error I just don't understand what it has to do with the RADIUS wireless client authentication);
https://supportforums.cisco.com/community/netpro/small-business/sbcountrysupport
Please do not hesitate to reach me back if there is any further assistance I may assist you with in the meantime.
Kind regards,
Jeffrey Rodriguez S. .:|:.:|:.
Cisco Customer Support Engineer
*Please rate the Post so other will know when an answer has been found.

I got problem when trying to contact my iphone 4 using facetime,it did ringing,but my iphone 4 did not receive that call as if nothing happen.But,when the call ended,that call appeared in the missed call list.fyi both are connected to internet.

i got problem when trying to call my iphone 4 using facetime with my Macbook Pro 13',it did ringing,but my iphone 4 did not receive that call as if nothing happen.But,when the call ended,that call appeared in the missed call list.fyi both are connected to internet.Help!! thank you in advance

i got problem when trying to call my iphone 4 using facetime with my Macbook Pro 13',it did ringing,but my iphone 4 did not receive that call as if nothing happen.But,when the call ended,that call appeared in the missed call list.fyi both are connected to internet.Help!! thank you in advance

Question: Is there a way to create a PDF from outlook e-mail that does not embed the attachment? better, is there a way to convert the e-mail with attachement (not embeded) as pdf pages? - Problem: I have 1400 e-mails with attachments that need to be conv

Is there a way to create a PDF from outlook e-mail that does not embed the attachment? better, is there a way to convert the e-mail with attachement (not embeded) as pdf pages?
- Problem: I have 1400 e-mails with attachments that need to be converted into pdf and the attachments cannot be embeded.
System: PC Windows 7 using Acrobat X Prof. - Thank you!

Hi ,
There is an option of embedding index for faster search while converting email to a PDF .
However I am not sure that will serve your purpose or not .
I would recommend you to get in touch with Microsoft support as well .
Meanwhile I'll work on it and get back to you in case I get a desired solution .
Regards
Sukrit Dhingra

Can't upload file to Sharepoint "The URL is invalid. It may refer to a nonexistent file or folder, or refer to a valid file or folder that is not in the current Web.

Hello,
I do database/SharePoint upgrades for SQL and or SharePoint or moving to new servers frequently. In a nutshell, I backup the database (run the upgrade tools if necessary), load new server and sql software and restore the db, load but
not configure SharePoint, and add the content db that was resotred through powershell. I have never had any big issues with this before. This time, I have done this same procedure as there is a new domain and new server.  Server and
SQL 2008R2 and SharePoint 2010 on both old and new servers - just new server and new domain. I have done this twice now (as it is a virtual server) and I have the same issue. I can't check anything in or upload anything new. I get the error
- The URL '<path to the file and filename>' is invalid. It may refer to a nonexistent file or folder, or refer to a valid file or folder that is not in the current Web. I have made sure
that my database and log files are on a drive that has plenty of space (db is not restricted to grow). I have made sure my database is not locked. I have checked to see that I don't have version in my indexed columns in that library (I
don't have any). I have checked that my recycle bin is on in central admin. I am not using RBS. I have turned on verbose logging and found the following when I searched on the correlation ID from the error message - it is saying invalid
column name extension. I am not sure what to do at this point. I can see there is a column in SQL called extension in the AllDocs table. Thanks.
09/16/2014 10:41:44.84 w3wp.exe (0x208C)                       0x1814 SharePoint Foundation
Logging Correlation Data      xmnv Medium Name=Request (POST:http://sqlsp:80/disc/_layouts/checkin.aspx?List=%7B5219EA15-A36A-4162-A188-4B8D518D7E79%7D&FileName=%2Fdisc%2FJigs%20and%20Fixtures%2FJigs%20and%20Fixtures%2FAssembly%2F30%20Assembly%2DGeneral%2FJ30XXA50%2D00%2Easm&IsDlg=1) 88fb3615-c87c-4a7c-8e83-d63a551a9b8f
09/16/2014 10:41:44.85 w3wp.exe (0x208C)                       0x1814 SharePoint Foundation
Logging Correlation Data      xmnv Medium Site=/ 88fb3615-c87c-4a7c-8e83-d63a551a9b8f
09/16/2014 10:41:45.01 w3wp.exe (0x208C)                       0x1814 SharePoint Foundation
Database                      d0d6 High    System.Data.SqlClient.SqlException: Invalid column name 'Extension'.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)     at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)     at System.Data.SqlClient.TdsParser.Run(RunBehavior
runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)     at System.Data.SqlClient.SqlDataReader.HasMoreResults()     at System.Data.SqlClient.SqlDataReader.NextResult()
at Microsoft.SharePoint.SPSqlClient.ExecuteQueryInternal(Boolean retryfordeadlock)     at Microsoft.SharePoint.SPSqlClient.ExecuteQuery(Boolean retryfordeadlock) 88fb3615-c87c-4a7c-8e83-d63a551a9b8f
09/16/2014 10:41:45.01 w3wp.exe (0x208C)                       0x1814 SharePoint Foundation
Database                      d0d6 High    System.Data.SqlClient.SqlException: Invalid column name 'Extension'.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)     at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)     at System.Data.SqlClient.TdsParser.Run(RunBehavior
runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)     at System.Data.SqlClient.SqlDataReader.HasMoreResults()     at System.Data.SqlClient.SqlDataReader.NextResult()
at Microsoft.SharePoint.SPSqlClient.ExecuteQueryInternal(Boolean retryfordeadlock)     at Microsoft.SharePoint.SPSqlClient.ExecuteQuery(Boolean retryfordeadlock) 88fb3615-c87c-4a7c-8e83-d63a551a9b8f
09/16/2014 10:41:45.01 w3wp.exe (0x208C)                       0x1814 SharePoint Foundation
General                       8kh7 High    The URL 'Jigs and Fixtures/Jigs and Fixtures/Assembly/30 Assembly-General/J30XXA50-00.asm'
is invalid. It may refer to a nonexistent file or folder, or refer to a valid file or folder that is not in the current Web. 88fb3615-c87c-4a7c-8e83-d63a551a9b8f
09/16/2014 10:41:45.01 w3wp.exe (0x208C)                       0x1814 SharePoint Foundation
General                       9mpn High    File exception: Microsoft.SharePoint.SPException: The URL 'Jigs and
Fixtures/Jigs and Fixtures/Assembly/30 Assembly-General/J30XXA50-00.asm' is invalid. It may refer to a nonexistent file or folder, or refer to a valid file or folder that is not in the current Web. ---> System.Runtime.InteropServices.COMException
(0x81020030): The URL 'Jigs and Fixtures/Jigs and Fixtures/Assembly/30 Assembly-General/J30XXA50-00.asm' is invalid. It may refer to a nonexistent file or folder, or refer to a valid file or folder that is not in the current Web.
at Microsoft.SharePoint.Library.SPRequestInternalClass.CheckInFile(String bstrUrl, String bstrWebRelativeUrl, Int32 iCheckinType, String bstrCheckinComment, Boolean bIsMigrate, Int32 iEditorId, ISP2DSafeArrayWriter pRestrictInsertCallback, ISP2DSafe... 88fb3615-c87c-4a7c-8e83-d63a551a9b8f
09/16/2014 10:41:45.01* w3wp.exe (0x208C)                       0x1814 SharePoint Foundation
General                       9mpn High    ...ArrayWriter pUniqueFieldCallback)     at Microsoft.SharePoint.Library.SPRequest.CheckInFile(String
bstrUrl, String bstrWebRelativeUrl, Int32 iCheckinType, String bstrCheckinComment, Boolean bIsMigrate, Int32 iEditorId, ISP2DSafeArrayWriter pRestrictInsertCallback, ISP2DSafeArrayWriter pUniqueFieldCallback)     --- End of inner exception
stack trace ---     at Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx)     at Microsoft.SharePoint.Library.SPRequest.CheckInFile(String bstrUrl, String bstrWebRelativeUrl, Int32 iCheckinType, String
bstrCheckinComment, Boolean bIsMigrate, Int32 iEditorId, ISP2DSafeArrayWriter pRestrictInsertCallback, ISP2DSafeArrayWriter pUniqueFieldCallback)     at Microsoft.SharePoint.SPFile.CheckIn(String comment, SPCheckinType checkInType, Boolean
b... 88fb3615-c87c-4a7c-8e83-d63a551a9b8f
09/16/2014 10:41:45.01* w3wp.exe (0x208C)                       0x1814 SharePoint Foundation
General                       9mpn High    ...IsMigrate, SPUser modifiedBy) 88fb3615-c87c-4a7c-8e83-d63a551a9b8f
09/16/2014 10:41:45.01 w3wp.exe (0x208C)                       0x1814 SharePoint Foundation
Runtime                       tkau Unexpected System.Runtime.InteropServices.COMException: The URL 'Jigs and Fixtures/Jigs and
Fixtures/Assembly/30 Assembly-General/J30XXA50-00.asm' is invalid. It may refer to a nonexistent file or folder, or refer to a valid file or folder that is not in the current Web.    at Microsoft.SharePoint.Library.SPRequestInternalClass.CheckInFile(String
bstrUrl, String bstrWebRelativeUrl, Int32 iCheckinType, String bstrCheckinComment, Boolean bIsMigrate, Int32 iEditorId, ISP2DSafeArrayWriter pRestrictInsertCallback, ISP2DSafeArrayWriter pUniqueFieldCallback)     at Microsoft.SharePoint.Library.SPRequest.CheckInFile(String
bstrUrl, String bstrWebRelativeUrl, Int32 iCheckinType, String bstrCheckinComment, Boolean bIsMigrate, Int32 iEditorId, ISP2DSafeArrayWriter pRestrictInsertCallback, ISP2DSafeArrayWriter ... 88fb3615-c87c-4a7c-8e83-d63a551a9b8f
09/16/2014 10:41:45.01* w3wp.exe (0x208C)                       0x1814 SharePoint Foundation
Runtime                       tkau Unexpected ...pUniqueFieldCallback) 88fb3615-c87c-4a7c-8e83-d63a551a9b8f
09/16/2014 10:41:45.03 w3wp.exe (0x208C)                       0x1814 SharePoint Foundation
Monitoring                    b4ly Medium Leaving Monitored Scope (Request (POST:http://sqlsp:80/disc/_layouts/checkin.aspx?List=%7B5219EA15-A36A-4162-A188-4B8D518D7E79%7D&FileName=%2Fdisc%2FJigs%20and%20Fixtures%2FJigs%20and%20Fixtures%2FAssembly%2F30%20Assembly%2DGeneral%2FJ30XXA50%2D00%2Easm&IsDlg=1)).
Execution Time=182.518658097607 88fb3615-c87c-4a7c-8e83-d63a551a9b8f

I have fixed it. I did a backup of the database and log file 2 times. I also did an upgrade-spcontentdatabase command in the sharepoint powershell. Not sure why it worked, but I had read online about upgrade issues from WSS2 to WSS3 to 2010
and I thought maybe something did not fully get upgraded even though this has been in use for 2 years since the upgrade.

Best approach to delete records that are not in the source table anymore.

I have a situation where I need to remove records from dimensions that are not in the source data anymore. Right now we are not maintaing history, i.e. not using SCD but planning for the next release. If we did that it would be easy to figure the latest records. The load is nightly and records are updated and new added.
The approach that I am considering is to join the dimension tables the the sources on keys and delete what doesn't join. However, is there perhaps some function in OWB that would allow to do this automatically on import so it can be also in place for the future?
Thanks!

Bear in mind that deleting dimension records becomes problematic if you have facts attached to them. Just because this record is no longer in the active set doesn't mean that it wasn't used historically, and so have foreign key constraints on it in your database. IF this is the case, a short-term solution would be to add an expiry_date field to the dimension and update the load to set this value when the record disappears rather than to delete it.
And to do that, use the target dimension as a source table, outer join it to the actual source table on the natural key, and so your update will set expiry_date=nvl(expiry_date,sysdate) to set to sysdate if this record has not already been expired on all records where the outer join fails.
Further consideration: what do you do if the record is re-inserted into the source table? create a new dimension key? Or remove the expiry date?
But I will say that I am not a fan of deleting records in most circumstances. What do you do if you discover a calculation error and need to fix that and republish historical cubes? Without the historical data, you lose the ability to do things like that.

The URL is invalid. It may refer to a nonexistent file or folder, or refer to a valid file or folder that is not in the current Web.

Hi all,
I'm having this issue on all document libraries when editing its properties, and it is also happening when creating new sub site (when it tries to provision the homepage). This issue is happening in a site collection that was migrated from a SharePoint 2010
environment.
I have investigated every single error message, and none of the search results I found on the web helped, including the issue with having multiple column names mapped to the same database name ("@tp_Editor" error below). The file exists and it
gets added to the document library but it fails when updating it's properties.
Here is logs from the ULS logs related to this issue:
<nativehr>0x81020030</nativehr><nativestack></nativestack>The URL 'test/sdfsdfsdf.docx' is invalid. It may refer to a nonexistent file or folder, or refer to a valid file or folder that is not in the current Web.
SPRequest.AddOrUpdateItem: UserPrincipalName=i:0).w|s-1-5-21-1739618301-713299677-2434533842-6675, AppPrincipalName= ,bstrUrl....
Non-version conflict error in RunItemEventReceiverExProps. Exception: Microsoft.SharePoint.SPException: The URL 'test/sdfsdfsdf.docx' is invalid. It may refer to a nonexistent file or folder, or refer to a valid file or folder that is not in the
current Web. ---> System.Runtime.InteropServices.COMException: <nativehr>0x81020030</nativehr><nativestack></nativestack>The URL 'test/sdfsdfsdf.docx' is invalid. It may refer to a nonexistent file or folder, or refer to a
valid file or folder that is not in the current Web.
at Microsoft.SharePoint.Library.SPRequestInternalClass.AddOrUpdateItem(String bstrUrl, String bstrListName, Boolean bAdd, Boolean bSystemUpdate, Boolean bPreserveItemVersion, Boolean bPreserveItemUIVersion, Boolean bUpdateNoVersion, Int32& plID, String&
pbstrGuid, Guid
Exception while assigning Document ID: The URL 'test/sdfsdfsdf.docx' is invalid. It may refer to a nonexistent file or folder, or refer to a valid file or folder that is not in the current Web.
Failed to get output parameter, HR: 0x80131509, Native stack:
[Forced due to logging gap, cached @ 01/31/2014 16:45:19.56, Original Level: Verbose] Invoking EventReceiver - [Id: {0}]
System.Data.SqlClient.SqlException (0x80131904): Parameter '@tp_Editor' was supplied multiple times.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
SQL error code from last error 8143 - Parameter '@tp_Editor' was supplied multiple times.
<nativehr>0x81020030</nativehr><nativestack></nativestack>The URL 'test/sdfsdfsdf.docx' is invalid. It may refer to a nonexistent file or folder, or refer to a valid file or folder that is not in the current Web.
SPRequest.AddOrUpdateItem: UserPrincipalName=i:0).w|s-1-5-21-1739618301-713299677-2434533842-6675, AppPrincipalName= ,bstrUrl=http://
System.Runtime.InteropServices.COMException: The URL 'test/sdfsdfsdf.docx' is invalid. It may refer to a nonexistent file or folder, or refer to a valid file or folder that is not in the current Web.
at Microsoft.SharePoint.Library.SPRequestInternalClass.AddOrUpdateItem(String bstrUrl, String bstrListName, Boolean bAdd, Boolean bSystemUpdate, Boolean bPreserveItemVersion,

It sounds like you have an Event Receiver attached to your library that might be throwing an internal error and blocking the file from being uploaded. The following errors state that the file that SharePoint thought was uploaded actually wasn't. I would
focus on what is happening within the event receiver.
Dimitri Ayrapetov (MCSE: SharePoint)

HT1296 My I-Phone has music on it that was synced from an I-Tunes library from a previous computer (which is no longer in use) AND purchases from the I-Tunes store. I would now like to transfer ALL of that music (not just the purchases from the I-Tunes s

My I-Phone has music on it that was synced from an I-Tunes library from a previous computer (which is no longer in use) AND purchases from the I-Tunes store. I would now like to transfer ALL of that music (not just the purchases from the I-Tunes store) into the I-Tunes library that I've established on a new computer.
Can that be done, and how (I've attempted without any success)?
Any assistance would be GREATLY appreciated!!

Contact iTunes support and explain your situation to them. They may let you redownload it at no cost.
http://www.apple.com/support/itunes/contact.html
If they don't, I'm afraid you'll have to purchase it again. Sorry.
B-rock

Exchange Personal Archive - When Replying To A Message That Is Not In the Inbox, Save The Reply In The Same Folder

-Settings
Exchange 2010 enterprise on-premise
Outlook 2013 std
Exchange Personal Archive
Feature : Option/Email/When Replying To A Message That Is Not In the Inbox, Save The Reply In The Same Folder
Hi,
the feature works fine in the mailbox of the user but not from within the exchange personal archive.
Instead the reply is saved in the send items folder of the mailbox.
Any suggestions how to make this work?
Best Regards,
zrvb

AFAIK, that is how it is intended to work. The archive is considered as "old-emails" so the newly created reply doesn't fall within that category.
Contact Microsoft Support by phone to submit it as a bug when it is "unexpected behavior" from your point of view or otherwise as a feature request/design change.
Robert Sparnaaij
[MVP-Outlook]
Outlook guides and more: HowTo-Outlook.com
Outlook Quick Tips: MSOutlook.info

How do you delete songs on iTune that are NOT on the library?

I got a new computer few days ago, and I downloaded iTune on my new computer today.
I want to delete all my songs that are in my iPod Touch now, and want to buy other songs.
I don't have any songs in my library at the moment, since there's no song in my new computer now.
So I want to delete songs, but since I don't have any of those songs in the library, I can't delete them. (I can't delete them since they are not on the library.)
Are there any ways I can delete songs that are NOT on the library?

You don't want to keep the songs that are on your iPod touch, in your library?
You can keep them in your library and not put them on the touch.
Then you can purchase other songs and put those on the touch.

I have started a photo book in iPhoto (OS 10.7.5). How can I add photos that were not in the original album?

I have started a photo book in iPhoto (OS 10.7.5). How can I add photos that were not in the original album?

Thanks for your quick response. I thought I had tried that but I must not have because it worked perfectly.

A Camcorder that's not on the "Qualified Devices List.." Still work?

Similar Messages

Maybe you are looking for