A case that works with Vision M play

I am going to buy a Zen Vision M (can't wait!!!!) this month. I was browsing the selection of players at Wal-Mart and came across this mp3 player case. It was about 3-5 bucks (bought it before Christmas, can't remember the exact price now). A Wal-Mart associate let me try the case out on the display Vision M and it works great!? It's a soft case, has a zipper that goes around three sides of the case. There's a pocket inside the case to store small items and there's a form fitting strap on the back so you can slip it over the back of your hand to carry it with a better grip. The case has some padding to it and the packaging claims it is "weather resistant". Also has?a headphone line out hole in the top of the case so you can thread the headphone wire through it in order to listen to the player while its in the case. The brand is Case Logic. (www.caselogic.com)?Just thought I'd throw that out there for anyone interested.

Im not sure of its size but an altoids case could be feasable.
check out mine:
http://smg.photobucket.com/albums/v627/Fev3r/Zen/
its easy to make and really cheap, PM me if you have any questions

Similar Messages

Case that works with smart cover on?

Has anyone seen any shells or cases that work with the smart cover on? I have only come across one.
Thanks

SF Bags, aka Waterfield Designs, has several designs made to fit the iPad 2 with the Smart Cover. I, too, have the original Ultimate Exo Sleevecase, but it is a bit large for the iPad 2. They recommend buying the "non-Exo" Ultimate case for the IPad 2.
One case that I particularly like is the SmartCase, and they make a model that fits with iPad 2 with the Smart Cover; it has a pouch on the back for earphones, etc.. I have a similar one for my iPhone and it is very well-made and offers a lot of protection.
They have seven different iPad cases and several are designed specifically for the iPad 2 with the SmartCover.
If you have any questions, you can write them, and they answer them promptly.

Case that works with iPad 2 Dock and Smart Cover

The title says it all , if possible list websites and full product details.
Many Thanks

This case meets all my requirements, however I am not sure that anyone makes one that will work with the dock, except an amoured film shield.
http://www.coolous.com/ipad.html?view=product&cid=2&id=33
http://www.bodyguardz.com/apple-ipad-2-cases-screen-protectors-covers-shields-sk ins-films.html

60G video, need case that works with Griffin Road Trip?????

I recently got a 60G and I'm looking for a case that will protect it and also fit with the Griffin Road Trip FM Transmitter and Charger. Anyone know of one that will fit? Thanks in advance.

i bought thsi case...don't knwo if u'll like it
http://www.iskin.com/eVo3gallery/features.html

Docking Speakers that Work with Hard Case

Hey there. I am going to get an iPod Video and I am going to be getting a hard case for it and because of previous iPod experiences, I do not want to take my iPod out of it ever again. Thus, as I look for docking speakers, one of my main concerns is that I can dock the iPod whilst the case is still on. Are there any good docking speakers that work with the Contour iSee hard case?
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wo/4.RSLID?mco=1 6E37974&nplm=TG336LL%2FA
Any suggestions would be greatly appreciated.

Hey!
By appearances it looks much like the Agent 18 case I use.Although I can't see the Dock access on the one you are looking at but they say "easy access to ports".If that's the case,you should be able to use the Bose Sounddock.I do and never take my Pod out.Just can't use the insert(not a major problem)for a snug fit.I can use all the ususal dock connectors too.Also,when you get your 5th Gn,leave the plastic film on the front.Also protects your clickwheel,and from scratches off the case itself.It does happen....
Cheers,
John

Car charger that works with the bumper case?

Does anyone know which, if any, brands of car chargers and models that work with the new bumper case? I went to best buy yesterday and they all looked too thick to even buy it and give it a try.

I'm pretty sure the lack of functionality with car chargers and the bumper case is simply because the cutouts for the USB connector on the bumper is too small..that's the only reason. Otherwise it will work; it's simply a physical problem with the connector not seating properly; that's it.
I'm saying this based on my own situation. I have a Griffin car charger /FM receiver that worked with my iPhone 3G and it worked with my iPhone 4 until I put the bumper case on.
The situation is the same situation as to why the Apple supplied USB cable that shipped with the 3G does not work with the iPhone 4 w/bumper. Apple redesigned the size of the USB connector and sized the cutout on the bumper for their new smaller size making the bumper not backwards compatible with existing devices with the older size USB connectors. The size differential is not that big but it's big enough to cause problems.

Routers that work with iChat AV?

Since Apple's list of approved routers hasn't been updated for years, I would love to hear from anyone who has purchased a router recently that works with iChat for audio/video, including any special setting changes/tips. Could anyone with a success story post here? I'm tired of the error 8 messages which in at least some cases seems to be router related.

@stevesol
I have used the DI-604 for about 5 years now. It is a great and cheap router/firewall. The only problem that I have ever had was an odd one. I have a mac pro. i have an external amp that I use for playing my music through. I had a cable run from the rear audio out to the amp. After the last firmware update (mac pro EFI firmware update 1.1) I could not use ichat anymore. If I bypassed the router and went straight to the modem then all was fine. It turned out that there was a major conflict with my setup using the router and rear audio out port but if i used the front headphone jack everything was fine. Other than that the DI-604 is very good. I open port 5190 on the router and have good results. If you are not sure how to open up ports then check out this site. It shows to open up a whole pile of ports but the 5190 port works fine for me.
http://www.portforward.com/english/routers/port_forwarding/Dlink/DI-604/iChat.ht m
I would also recommend this fine site from one of the other posters. Ralph Johns site is excellent
http://www.ralphjohnsuk.dsl.pipex.com/page2.html
and of course what Apple has to say about their firewall
http://docs.info.apple.com/article.html?artnum=93208

I need a keyring (that works with network-manager)

Hi there,
I'm new to Arch linux (coming from Ubuntu) and I'm wondering how to set up a keyring that works with that gnome-network-manager applet and ssh(fs). I previously used GNOME and the gnome keyring, and all out of the box.
I couldn't find any manuals on how to set up the gnome-keyring in Arch linux, neither regarding ssh(fs) nor network-manager. I read people are complaining about network-manager asking for the keyring-unlocking-password, but this doesn't happen for me.
How do I set up the gnome-keyring propertly?

siriusb wrote:moljac024:
https://bugs.launchpad.net/wicd/+bug/377471
From this bug page:
The /etc/wicd/wireless-settings.conf file is made root-readable only. This means that any malicious users must have root access or physical access to the machine. In either of these cases, you have far more problems than worrying about the wireless network key.
Please see http://developer.pidgin.im/wiki/PlainTextPasswords for a very good explanation as to why the passwords are not encrypted.
It may be plain text, but only root can read/write.

Free bumper cases wont work with car chargers

Apple sent me a bumper and I tried it with a griffin car charger and it will not plug in as the cutout in the case is not large enough to fit the end of the cord. These have been around for a while and if you want to use them do not order the bumper. I called Apple and they stonewalled and said it was a third party item and they do not guarantee to work with them even though they sell them on their web site. They will not send out a case that works either. Typical I guess as Apple never makes a mistake.

I completely agree with the topic poster.
Let's think and not just knee jerk.
First, why did Jobs introduce the bumper right at the same roll out of the iP4? I mean isn't that odd to talk about cases like some side show pitchman along side a fine, new item like the 4?
Answer- he knew at that time the external antenna was susceptible to issues if held in the lower left corner. The proof of that is his quote from the press conf. when, in addressing the issue, he said, "look we even show you where it is…x marks the spot." (as he referred to the antenna seam)
So, conclusion, issue was known and anticipated and admitted.
That brings us to the bumper. If they knew the issue and wanted to help ameliorate it, why not build a bumper that not only addresses the antenna but one that also allows maximum access to the charging opening, accommodating most chargers?
Why risk further customer issues?
Apple is a hi-tech hardware design company with few if any peers.
You're telling me they couldn't figure this out, that they couldn't build in the "Dremeled" more accessible bumper bottom?
Come on.
They blew it. That's the answer. They are human and they rushed this "patch" with the supplier and blew it.
And in the middle of a fiasco (that's what the antenna issue became) they further alienate good customers, like the person initiating this topic and countless others no doubt, by not attending to a small yet critical issue with the bumper.
So, poster of this thread, you are right.
Others, yes there are alternatives but as a business owner myself I'd advise Apple not to alienate paying customers.
All that said… the iP4 is marvelous.
Get a case that's made correctly like I did and there is no issue at all with reception. In fact it is VASTLY improved for my usage.
That may not be the same for all and that's why we listen respectfully in this forum.
So we can be helpful. Right?

Need Sceptre TV Remote Control code(s) that work with VZ P265v3RC -- the '335' code does NOT

Recently upgraded my TV's in my house with new Sceptre 40" and 50" TV's - thank you WalMart. Purchased in September 2014. (new / current Sceptre TVs).
All of the Verizon printed, online, and other documentation for the P265V3 RC (model RC2655005/01B) for Sceptre shows to use code '335'. I have tried the '335' code on both of the TV's and no worky at all.
Following the 'Quick Setup Guide-Verizon FIOS remote' steps (paper/PDF instructions with RC Manual):
I can successfully enter the '335' code as outlned in step 4... and 'The RED LED will blink twice and then stay on'. occurs. So far, so good.
Step 5 states, "5. Press and release the <CH +> button repeatedly until the TV turns off......." This happens perfectly... I can press the <CH+>> button a few times, and indeed, my TV turns off.
Now, onto Step 6: "Test that the remote control is programmed for your TV"..... can't get Mute, A/V, other keys to activate /. be recognized - even though I'm followijng "press and hold that key. Release it as soon as it works"
Does anyone have a working code for Sceptre TV's ??? The Verizon '335' code doesn't work for me.
I need the 'best code' anyone has found that works with new Sceptre TV's.... the 335 code that VZ recommends... no worky.

Robertop,
have you tried the following? The info below is found here
Turn on your TV and the FiOS TV Set-Top Box.
Make sure you can see live TV.
Press and hold the OK and FiOS TV buttons together then release both buttons.
The red LED light blinks 2 times and then stays on.
Press and hold the Play button.
The remote control tries a new TV code every second.
The red LED light blinks each time a new code is sent.
When the TV turns off, release the Play button immediately.
NOTE: Some TVs may respond slower than others. If necessary, you can press the Ch+ and Ch- buttons to go forward or backward one TV code at a time.
Test your remote to ensure it is working properly:
- Turn on the TV by pressing the TV button on your FiOS TV remote.
- Press the Vol+ and Vol- buttons to ensure that you can control the volume.
- Press the Mute and A/V buttons to ensure they work.
If any of these buttons do not work, press and hold that button. Release the button as soon as it works.
If all the buttons work, press OK to this TV remote code.
The red LED light blinks 3 times and then turns off. Your remote control is now programmed.

I have an airport extreem network that works with two MacBooks. I am trying to get my PC (IBM ThinkPad) to connect to the network. The PC has airport for the PC downloaded but it will not recognize the network. Any suggestons please!

I have an airport extreem network that works with my two MacBooks and a iMAC. I am having no luck in getting a PC (IBM ThinkPad0 that has the PC airport software to be recognized by the network. Any suggestions?

When you introduced the AirPort Extreme, you had a condition where you have two routers in series. The simpliest solution is to reconfigure the downstream router (in this case the Extreme) as a bridge. This will allow the upstream router to provide the required NAT & DHCP services to all network clients regardless of which router they are connected to.
To reconfigure the Extreme as a bridge, you will use the AirPort Utility. (Note: I will provide the steps for using AirPort Utility v5.x)
AirPort Utility > Select the AirPort > Manual Setup
Internet > Internet Connection tab > Connection Sharing = Off (Bridge Mode)

Full HD camcorders that works with iMovie 11

Is there a list of Full HD camcorders that works with iMovie 11 directly - plug & play (import, edit,...), without need to use any workarounds ...
No compromise as to the quality of video.
I am about to buy a new camcorder and am bit confused reading practical/real life user experience presented on the Internet ...
Thanks, Ivan

Here is the list.
http://help.apple.com/imovie/cameras/en/index.html?lang=en_US
iMovie will not import 60P video without a lot of tinkering, nor will TV sets play 60P video. So that is a feature that helps sell cameras but is not currently a must have. If you shoot a lot of slow motion, 60P can be very useful.
Make sure the camera you buy will shoot 30P, 25P, 24P or 60i.

Is there an "insert all links" type of feature or add-on for Firefox that works with Thunderbird?

Hello Firefoxies,
Is there an "insert all links" type of feature or add-on for Firefox that works with Thunderbird or any email app? I want to be able to insert all the links from a Firefox bookmarks folder automatically in to an outgoing email and include the names that I have given to those saved links / bookmarks.
I searched for this add-on on the Firefox and the Thunderbird sites, but I don’t think the one that I found is for what I am thinking of.
What I would like to do is to be able to add all the links in a saved tabs folder, or any bookmarks folder, from Firefox in to the body of an outgoing email preferably in Thunderbird, or any email app... so I could just click and all the links and hopefully all the names that I have given to those links will then appear in the body of an outgoing email automatically, ready for me to then write what I want, plug in an address, and send.
When I did a search of add-ons on the Firefox and Thunderbird sites, I found something called “Open all links 0.3.1” on the Thunderbird site that I think is for the opposite of my description... I think this add-on is to automatically open all the links in an email that is received... '''which IS NOT what I want to do'''... I want to place all the links that I have in a Firefox bookmarks folder in to an outgoing email... the URL to the “Open all links 0.3.1” add-on is below for you to look at just in case I am reading this wrong...
https://addons.mozilla.org/en-US/thunderbird/addon/2913/
Otherwise, I could not find any add-on that fits my description.
Thanks so much,
numetro

Hello Firefoxies,
Is there an "insert all links" type of feature or add-on for Firefox that works with Thunderbird or any email app? I want to be able to insert all the links from a Firefox bookmarks folder automatically in to an outgoing email and include the names that I have given to those saved links / bookmarks.
I searched for this add-on on the Firefox and the Thunderbird sites, but I don’t think the one that I found is for what I am thinking of.
What I would like to do is to be able to add all the links in a saved tabs folder, or any bookmarks folder, from Firefox in to the body of an outgoing email preferably in Thunderbird, or any email app... so I could just click and all the links and hopefully all the names that I have given to those links will then appear in the body of an outgoing email automatically, ready for me to then write what I want, plug in an address, and send.
When I did a search of add-ons on the Firefox and Thunderbird sites, I found something called “Open all links 0.3.1” on the Thunderbird site that I think is for the opposite of my description... I think this add-on is to automatically open all the links in an email that is received... '''which IS NOT what I want to do'''... I want to place all the links that I have in a Firefox bookmarks folder in to an outgoing email... the URL to the “Open all links 0.3.1” add-on is below for you to look at just in case I am reading this wrong...
https://addons.mozilla.org/en-US/thunderbird/addon/2913/
Otherwise, I could not find any add-on that fits my description.
Thanks so much,
numetro

How can I make an icon that links to a webpage that works with Mac and Windows??

Hi!
I burn CDs with my photos and send them to clients. Besides the photos folder, I would like to include a file (similar to the .webloc files on the Mac Desktop) that can be clicked and it will be linked to my website - it will open up a browser window and go to my website . Is it posssible to make one of these icons that works with both Macs and Windows machines? Thanks!

Now it works! Thanks, Denico!
The reason I saved to text: The first time I followed your instructions, it did not work. I tried to figure out what I did wrong and saw that you wrote to "save as plain text." I did not know what this means and there was no option available to save a plain text. So I looked around and saw "save as stationery" and I guessed that maybe that was what you meant. And after that, it worked! But the next thing you know, the icons started duplicating themselves.
I guess I had made a different mistake in the beginning and I fixed it without knowing what it is.
Thanks for clearing that up.
But just one question. WHY does saving as "stationery" make an icon duplicate itself?

A UPS model that works with Mac Native software to do a graceful shutdown and automatic restart during a power failure.

I've tried 3 UPS's (2 APC and one TripLite) that state they are OSX compatible, however, they do not fully respond to the native osx setting in (system Preferences/ Energy Saver/ UPS/Start up automatically after a power failure). This is what happens:
During a power outage, the OS does a graceful shutdown, but does not reboot when power is restored.
Apparently, the UPS is not notified to turn off during the shut down process. The power (on-Off-On) cycle is required by the mac to restart.
Trip lite tech support says they have software that works with Windows and linux to do this, but not mac.
I've tried two older APC UPS's, One Smart UPS1500 and a Back-UPS 1500 with the same result on two different servers and one iMac.
At this point I'm looking for a make and model of a UPS that does work. If anyone can verify a make and model that actually does this, I'd greatly appreciate it.
Its a simple test, just pull the plug on your UPS, wait for the system to shut down, and then plug the UPS back in. The system should reboot.

Many of the CyberPower UPS units are compatible. Checkout the home solutions on this page: http://www.cyberpowersystems.com/products/ups-systems.html

A case that works with Vision M play

Similar Messages

Maybe you are looking for