A Characteristic & its Nav.Attr. appear in a cube, not in another :-)

Hi all,
I encounter a problem.
I've two specific sales cubes, in one of them one of the characteristic and its nav. attributes appears & all is ok, But in my other one there are empty columns for this Characteristic and Nav Attr ( seen with manage -> infocube content ).
I already did "Hier./Attribute change"...
An idea ?
Thx
Erwan

Hi Ananth,
Yes I did.
I don't understand why these Nav attr. doesn't appear in my cube though they appear correctly in the other one...
Someone has an idea ?
Thx ,
erwan

Similar Messages

Can we add an info object and its nav. attr in an aggregate together?

Hello
I am getting an error when I try to add 0MATERIAL and 0MATERIAL_OPROD_HIER in an aggregate at the same time. In the cube, both 0MATERIAL and its attr 0MATERIAL_0PROD_HIER sit in the same dimension. Therefore, when I try to create an aggregate and drag these chars in, they try to come into the same dimension here also.
1st scenario:
1. I add 0MATERIAL in the aggregate.
2. I try to add 0MATERIAL_0PROD_HIER in the aggreate, I get an error message ' Aggregation levels cannot be defined for 0MATERIAL_0PROD_HIER.
3. And it does not let me add this nav attr at all.
2nd scenario:
1. I first add 0MATERIAL_0PROD_HIER in the aggregate.
2. I try to add 0MATERIAL now.. I get the same error as above for 0MATERIAL this time.
3. But it lets me add 0MATERIAL inside.
4. Now, when I go its context menu (right click) and select aggregation as 'All Char Values' for 0MATERIAL, then the error goes away.
5. But after I activate and fill the aggregate, I have a look it again.. and now I only see 0MATERIAL and its nav attr which I added first has disappeared.
Why do the above 2 happen? And if I have an info object and its nav attr in ROWS in a query, and if I am not able to add both of them to the aggregate.. how can I improve the performance of the query?
Please advise.

Hi Srinivas
In your scenario, it is sufficient if you just add 0Material when you are creating the aggregate. Need not add the nvaigational attribute in the aggregate definition. The procedure you followed the first time is right i.e. Drag and drop 0material first.
The system does not allow you to add the nav attribute because it is not required. I say this because a navigational attribute added to your infoprovider is like (in terms of SQL) joining your infoprovider with your material master table. Navigational attribute's value is not physically stored in your cube. It is brought in during execution time in both list cube as well as in your query output.
Similarly when you execute your query with 0material as your aggregate, even if you add a filter or variable restriction on 0Material_prodHier your query WILL use the aggregate since 0material is referenced.
You can even check this in RSRT. Give your query name, and generate report first. Then click on Execute + Debug, Choose Display SQL/BIA Query and enter your selection and choose enter. You will see the SQL of your query and in the SQL select statement you will see that your aggregate table is chosen instead of your infocube. This aggregate table only will be read during your query execution in Bex as well.
I hope this helps.
Thanks.

Slow query with a lot of Nav attr and filter with them,what can i do

Hi Gurus,
my problem is this and the reason why i m asking:
i got a query that the 80% of the char that show in the query are Nav Attr of an Infoobject "A", and i filter for some Attr Nav, this IO its like to say Invoice Number, but this "invoice number" has a lot of Attr that i need and change every day and i need the last value in the report, if i put it in the cube the Attr nav, this save a history and the values in the report are wrong, for that reason i am thinking in put this IO in line item dimension but using its Nav attr, , i dont know guys, help me

x

Nav attr of Nav Attr will appear in Cube ?

Hello BW Experts,
I have a 0Division has the Nav Attr Zmatfm material family. Zmatfm material family has the Nav Attr Zprdcat Product Categoy.
i.e 0Division__Zmatfm is one relationship;
Zmatfm__Zprdcat is second relathioship;
If I add the 0Division to the cube. Can I use Zprdcat in the cube as Nav Attr ?
Thanks for your suggestions.
BWer

Hi,
Transitive attributes:
You can report on navigational attributes by linking corresponding values of these characteristics with master data. Transitive attributes provide you with the linkage.
Lets say, for example, that an InfoObject has an attribute that has another attribute on which you need to report. You cant, however, because you dont have the attribute of the original InfoObject in your InfoCube. Transitive attributes satisfy just this type of reporting requirement. They are effective and simple to configure.
Hope this helps you.
regards,
ravi

Nav.attr data is not coming in cube

Hi guys,
Nav.attr data is not coming in cube even though there is data in master data tables.

Hi Ajay,
In your case for the Nav Attr data to appear firstly load the master data where your Nav Attr resides and then do the apply hier/attr change for that master data.
Hope this helps.
Bye
Dinesh

Which gives better performance in webi using display attr or nav attr -

Hello all,
We are using the Bex query as the datasource for our universes and the end user is using the Web Intelligence as the reporting tool (rich client and infoview) we have employee as one of the infoobject in the cube.
Now employee has a lot of attributes which the user wants to use for reporting (delivered employee infoobject has quite a few attr), we are making some of them as Nav attr like Org unit since they are time dependent and the end user will need to put in the key date to bring the employees from right org unit.
We have enhanced the employee attr to have the all address information of the employee (Z fileds) and we have made those nav attr in RSd1.
So my question is should we make the address Z fields as nav attr in cube as well and use those objects in webi or can we use the objects in webi which fall under employee like details (green icons) rather than separate object.
Please let me know what will keep better performance and what is the best practice.
Thanks you in advance and appreciate everyone's help
Edited by: Cathy on Jun 16, 2011 7:35 AM

Hi,
BEx Query Design Recommendations:
"Reduce Usage of Navigational Attributes as much as possible Also, if simply displaying a Characteristicu2019s Attribute, DO NOT use the Navigational Attribute u2013 rather utilize the Characteristic Attribute for display in the report This avoids unneeded JOINS, and also reduces total number of rows transferred to WebI"
Source : SAP Document
Thanks,
Amit

Creating RKF in Query Designer using Nav Attr of a Nav Char InfoObject

Hi
SCENARIO
I have a Char InfoObject POSTFI[POSTFI is Navigational Attr] with 3 Navigational Attributes included in the InfoCubes.
1. ZINREPIND Reporting Indicator
2. ZFITMCD01 Statement 01 Financial Item
3. ZPCNR1 Profit Center Indicator
NOTE: All the above mentioned Nav Attr are properly set as Nav Attr and Active, Check and Rechecked.
We have 2-InfoCubes Current and Historical[both have same Structure].
A MultiProvider is build using the above 2-InfoCubes and the Char InfoObject PostFi is included in the MultiProvider.
Now I am trying to Create a Report using Query Designer and in that I have to Create a RKF[GrossSales1] and
the Condition for which is KeyFigure=FINAMT, where POSTFI_ZFITMCD01 = 5010, POSTFI_ZPCNR1= Y
PROBLEM
I can see the Nav Attr ZINREPIND, ZFITMCD01, ZPCNR1 in the main Screen of the Query Designer's LeftHandSide Pane containing KeyFigures and Dimenions under Dimension Financial=> PostFi=> Nav Attr ZINREPIND, ZFITMCD01, ZPCNR1.
While creating the RKF on KeyFigure FINAMT I am just able to see the InfoObject POSTFI[in its resp Dimension] in the
Display RKF GrossSales1 Screen in the Left Hand Side Pane where we see the KeyFigures and Dimensions.
But I am NOT able to see the Nav Attr's ZINREPIND, ZFITMCD01, ZPCNR1 anywhere in the LHS Pane of the Display RKF GrossSales1 Screen.
Now I cant Create the RKF bcoz I cant see the 3NavAttr's of Char InfoObject PostFi it the LHS Pane and the 2-Nav Attr required for creating the RKF.
Can anyone PLEASE let me know How can I see/bring these Nav Attr ZINREPIND, ZFITMCD01, ZPCNR1 in the LHS Pane of the RKF Creation Screen to add them to make my RKF ?
Thanx in Advance

Hi
As per your explanation, below are the details
POSTFIPOSTFI --- This is navigational attribute which has below 3 objects as navigation attrs.
1. ZINREPIND Reporting Indicator
2. ZFITMCD01 Statement 01 Financial Item
3. ZPCNR1 Profit Center Indicator
first one, could you please confirm whether POSTFIPOSTFI is main info object or it is attribute of another info object.
If it is attribute of another info object, then the last attibutes(3) are called Transitive attribute(attributes attribute).
Reporting on Transitive attributes is only possible with the creation Info Sets.
If my guess is correct, then create Info Set based two info cube now create the query.
Hope it will work
Regards,
Venkatesh.

How to get the list of Infocube/DSO in which one nav-attr is used

Hi all,
i have a requirement to find the list of all infocubes and DSO in which a particular navigational attribute say:xxx_yyy [i have list of 50 nav attr for which i have to do this] is used.
i need ur help on this.
i need the distinct list of infocubes and DSO

guys, 80% of my problem got solved.
here is the solution list as u all have suggested and that i have checked it also.
RSDCUBEIOBJ - infocube list for any nav-attr
RSDODSOATRNAV - DSO list for any nav-attr
ODSOIOBJ. - DSO list for any infoobj
but in these tables, one thing i observe is that each infocube/DSO name is repeated multiple times. why is that? from where it populate?

Combining 2 nav.ATTR into one

Dear Experts,
I have the following problem:
In the InfoCube we have 2 characteristics with the same nav. ATTR (0coorder and 0costcentr, nav.attr is profit_ctr).
Data records are loaded from two sources (orders and costcenters).
I need to combine both nav.attr - meaning to combine records on the level of profit_ctr (nav.attr) to be display in the same line. Records from orders do not have costcenters, records from costcenters do not have orders.
Is this possible in the BEX or with MultiProvider?
I do not want to change loading procedures or change InfoCube !
ThanX, tom

Hello Tomaz,
just an idea, not sure if this works.
Try to create the multiprovider based on your infocube.
In the definition of the multiprovider characteristics assign for the profit_ctr both the nav.attribute of 0coorder and 0costcentr. The query should combine the records with the same profit_ctr then.
Regards,
Kirill

HT4623 Hi. My device won't update iOS in settings. It won't download apps for me. Itis connected to the internet). The latest app I tried to download appears stuck! Has not completed its download, won't open and I cannot delete it. What can I do?

Hi. My device won't update iOS in settings. It won't download any new apps for me. (It is connected to the internet). The latest app I tried to download appears stuck! Has not completed its download, won't open and I cannot delete it. What can I do? I purchased the product online a year ago. I'm not sure of the exact date... I think it was late November 2012.
Any help appreciated.
Fileas

If this has happened more than once the problem is likely on your PC.
See here: http://www.apple.com/support/iphone/assistant/itunes/

Map nav attr to char in multiprovider

Hello BW Experts,
map cube1.iob1.navattr1 == cube2.iob1
where navattr1 same as cube2.iob1
is that possible in the multirprovider BI 7.0 ?
please suggest.
BWer

why is the nav attr data not visible in the multiprovider listcube ???
is there checklist needs to be taken.? what am i missing.
master data active
rsrv infobject fine
rsrv cubes fine
attribute change run fine
please suggest
BWer

If the other person knows my ID, whether on its iPhones messages appear to come to my iPhone?

if the other person knows my ID, whether on its iPhones messages appear to come to my iPhone?

nope. they'll either go to you because you have data, or they'll show up on your friend's phone as 'undelivered'

When i switch on my macbook its icon first appears smallers then gets bigger and the place where we enter the password.......that page looks like over zoomed. Please help tell what to do????

when i switch on my macbook its icon first appears smallers then gets bigger and the place where we enter the password.......that page looks like over zoomed. Please help tell what to do????

Reset PRAM. http://support.apple.com/kb/PH18761

Changing Disp Attr to Nav Attr

Hi,
Can a disp. attr be made a nav attr after the data is loaded. It already in production.
If yes, What are the impacts with SIDs and any other issues. Can I change it back to disp. attr
If it can be done, do i need to take any precautions in transporting.
Any suggestion would be greatly appreciated.
Thanks
Gokul

Hi Gokul,
yes you can change a disp-attr to a nav-attr. But if you also want to do reporting on it you also need to switch it on in you dataprovider. After activation of the infoprovider you also need to reactivate all update rules for that provider and also the multiproviders. After everything is done, you should do a attr. and hierarchy change run for that infoobject.
To switch it off again, you need to start from the providers and then you can switch it off in the infoobject. And you have to reactivate all multiproviders and update rules based on your provider.
regards
Siggi

Details: i have 25 dollar but i cant by gem on clash of clansgame when i want to buy gem this massage appear (your purchase could not be completed contract i tune store support to complete this transaction please help me to solve

Details:
i have 15 dollar but i cant by gem on clash of clansgame
when i want to buy gem this massage appear (your purchase could not be completed contract i tune store support to complete this transaction
please help me to solve problem

You will want to contact iTunes Store Support from expresslane.apple.com or call Apple Care to see whats wrong with your billing information or why its being blocked.

A Characteristic & its Nav.Attr. appear in a cube, not in another :-)

Similar Messages

Maybe you are looking for