A communication error has occurred:An XML element was malformed(call to SP)

Hello experts,
Visual Composer tells me in a pop up, that:
"A communication error has occurred:An XML element was malformed"
when it tries to call a Stored Procedure (SP). This is s.th. that happens only sporadically, i.e. I can trigger the SP many times and see that it executed correctly. Then, suddenly it doesn't work anymore, but when I keep clicking it starts working again after a while.
I checked that nobody has opened or locked my model, because I read that this can cause this behaviour in another thread.
What is the cause for this? What can I do?
I'm looking forward to your replies and will reward with points,
Sincerely,
Florian

Hi ,
wht ever u said is absolute correct
xml error , 32k span error , portal request failed errors are usually cmng in vc
sometimes it will work and sometimes it wont work tht tine we have to reimplement our task .
can please help any one thse error in vc7.1
Regards ,
venkat

Similar Messages

A communication error has occurred: An XML element was malformed

Hi all,
I have trasported an VC model to the production enviroment. While executing it i am getting the error
"A communication error has occurred: An XML element was malformed"
When i search SDN i got to know the details from the Note 979583 as : its a known limitation of Visual Composer, as the flex is unable to handle the large amount of data been fetched.
Please let me know whether there is a work around to this problem. Can this problem be resolved by using Visual composer 7.1 ?
Thanks in advance.
Jeswin

Hi Jeswin,
Can you please check whether the alias you use in your DEV system is the same as you use in your PROD system? If not, you might also get this error.
Natty

A communication error has occurred while invoking commands in SharePoint host process

Hi All,
I am using Virtual box to connect to Sharepoint 2013 VPC. Due to an unexpected sutdown of my machine the VPC got some issue. Now I restored it using my bak up file. But after this when I deploy my sharepoint 2013 farm solution Iam getting the following error.
Error occurred in deployment step 'Recycle IIS Application Pool': A communication error has occurred while invoking commands in SharePoint host process: The server did not provide a meaningful reply; this might be caused by a contract mismatch, a premature
session shutdown or an internal server error.
What could be the issue? Any suggestions ?
Thanks in advance...
Regards
Nimisha
[email protected]

Hi Nimisha,
Seems that the original issue of communication error has been solved, for this new issue, it is recommended that you open a new thread which can make others easier
to focus on one issue in one single thread.
Best regards,
Patrick
Patrick Liang
TechNet Community Support

Canon MX340 wireless printer no longer connecting over wireless and coming up with "a communications error has occured"

I have a Canon MX340 wireless printer and have only recently started having trouble printing over the wireless connection. No settings have changed on my MacBook Pro, the printer, the router or the wifi connection and it is strange how it has just stopped working. I have tried things like restarting the laptop and removing the printer from the laptop and re-adding it. It sometimes seems to work for maybe one print but then it goes back to saying "a communications error has occured", when I try to print again.
Any help would be great. Thanks

I had the same MX340 problem. My printer was working fine over WiFi connection to my Airport Extreme for years and then suddenly, about a month ago, it stopped printing after the first print job. I can print once and then I have to power-cycle the printer to get it to print another time and then I have to repeat the power-cycle.
The printer seems to be "forgotten" by the network or lose its connection after the first print job.
On my MacBookPro 10.6.8 I get the error code 300...yadayadayad... On my iMac 10.5.8 it just says :communications error".
HERE IS THE FIX - I got it off this link - http://www.techsurvivors.net/forums/index.php?showtopic=24681
You have to connect to the MX340 using the printer cable that came with the printer (or any USB printer cable) and set up a hardwired USB printer queue. Then print a couple of print jobs - I use TextEdit and type in "1234". Then try the same thing but select your WiFi print queue - I just type another line on the same sheet of paper with TextEdit.
The WiFi connection should work again. I did this a few more times and then disconnected the USB cable and now it continues to work without the USB print queue being used. I can also print to the WiFi queue with my iMac.
If you still have problems I suggest you set up the printer again on the WiFi router using the "print cable connection" method. Here's a link to a webpage someone kindly provided instructions for the process:
http://machinesaredigging.com/2011/04/08/how-to-install-the-printer-canon-mx340- wi-fi-without-the-cd-on-mac/
Good luck!

Cannon mp990 a communication error has occurred

Hi all,
I have been having a major problem withh my Cannon mp990 printer. When I try to print ,it keeps on coming up with "a communication error has occurred".
It's driving me mad !!!!! HELP PLEASE !!!!!
thanks
Speedwell7

Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
10.5/10.6/10.7/10.8 instructions...
In System Preferences>Fax & Print, Right click or Control+click on the Printers list Sidebar, choose Reset Printing System.
if you hold option and click the "-" tab it resets the printing system.
http://www.macosxhints.com/article.php?story=20031215144430486
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
Resetting the printing system in Mac OS X 10.5.x+++
    1.    To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
    2.    Choose System Preferences from the Apple menu.
    3.    Choose Print & Fax from the View menu.
    4.    Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..."       As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
http://support.apple.com/kb/ht1341
Reboot.

Canon Pixma displays "A communication error has occurred"

I have a Macbook Pro running 10.6.8 and a Canon Pixma MG 5220. Both are connected to a Linksys E1000 wireless router. I have had a lot of problems getting this printer to connect wirelessly with my MB. I have searched the internet for answers tirelessly and tried the suggestions that I found; however, nothing has seemed to remedy the problem.
I have set up the printer according to it's directions step-by-step. Using my CiscoConnect application, I added the printer to my network. I have entered in the network name and password into the printer and it tells me that it is connected. I used the CD that came with the printer to install the necessary drivers and add the printer. I have gone into my System Preferences and added the printer that way. Any time I try to print, the error message "A communication error has occurred" comes up in my printer queue. I have the printer added with the USB connection just fine, but it is irritating to have to get up and connect my laptop when this is a wireless printer. Once I have the USB printer added, I cannot add the printer wirelessly. All I see is "Bonjour Scanner." I have checked the signal strength, and it is fine. I have used the Network Utility to ping the IP address and it is fine as well. What is going on with my printer????

https://discussions.apple.com/message/21003547#21003547

Communication error has occurred - Canon PIXMA printer

This was driving me nuts! I tried many of the other ideas offered in these discussions, but nothing worked. Sometimes my Canon PIXMA MP640 WiFi printer would work, usually it wouldn't. I would get "A communication error has occurred" message on my MacBook Pro (Snow Leopard) and the print job would just stay in the queue until I deleted it. Most of the time I needed to re-enter the network password at the printer BEFORE EVERY PRINT JOB which was a pain because the password was 10 characters long and I could only dial in each letter one at a time.
If you are having similar trouble, before you do anything CHECK THE WIFI SIGNAL STRENGTH USING THE PRINTER MENUS! On my model, this was done by going from the Home menu to Settings->Device Settings->LAN Settings->Confirm LAN settings->Print LAN Details. If the signal strength on the printout shows less than 50%, there is too much interference from other electronics in the area (or the printer is too far from the router). In my case, the printer was in the next room, i.e., not too far from the router so I knew it had to be EM interference.
At first, my signal strength was showing 36%. Then I moved the printer into the same room as the wifi router, within 7ft and directly in line of sight of it and it went to 62%. I thought it should be much higher, so I moved the printer to within 4ft and it went to 80%. Then I unplugged the LCD TV (which was NOT turned on at any time) that was on the counter nearby, and it jumped to 90%.
After months of poking at this problem and finally resigning to the idea that the printer was broken, I tried this and now it works perfectly as long as the TV is unplugged. I plan on moving the router away from the TV so I won't have to unplug it whenever I print.
Hope this helps!

I've wrestled with this off and on with this printer ever since I got it. Just checked and my signal was at 44%. Guess that could be it!... guess I'll do some relocating of the router, boost the signal or run an ethernet line. Never though the signal being that low would cause this many print errors.
I thought is was just happening when the printer would go to sleep... or not used for a few days.
Thanks!

I cannot print to my wireless Canon printer. A communication error has occurred.

I have had no problems printing to my wireless Canon printer until yesterday. Now when I try to print the icon at the bottom shows a printing job has been started but nothing ever prints. When I open the print cache it tells me that "A communication error has occurred." I've checked the printer and it is still set up properly. I have unplugged my wireless router and modem to reset, but this has not interrupted my ability to access internet nor has it reset the printer to a different setting. I am at a loss as to why I can't print any longer. Since we bought the mac in July I haven't had any problems and this really has thrown me for a loop as to why it is occuring. Any thoughts would be greatly appreciated.

Perhaps one of the printer drivers is corrupt. Go to http://www.canon.com.au/en-AU/Support-Services/Drivers-and-Downloads (or other country download).

"an XML element was malformed" error with anonymous user

There is no problem with another user but with anonymous user it gives "an XML element was malformed" error when I want to select data from Oracle database using BI_JDBC in VC. I have done the user mapping for the anonymous user like other users. I also give "read" and "end user" permissions for anonymous user in the BI_JDBC connection. For other users, it works. What should I do to use BI_JDBC in VC with anonymous user.
Thanks in advance

Hi Nihat,
we currently facing the same issue, did you found the solution for this, or maybe a workaround for anonymous system access? Thanks for your help!
Kind regards,
Benny

An XML element was malformed

Hi!
I got "An XML element was malformed" error and found the corresponding note 979583. It mentions that VC Flex client can not manage extremely large amount of data. I wonder if anybody knows how much is "extremely large" for VC?
Thanks for ideas,
--- Kaspars
P.S. In may example there was just table of 2 columns and 18 rows (each field max 40 chars) which was sent to & received from RFC function module ...
P.S.S. the strange thing was that with one user ID it didn't gave this error, but with another test user ID it did.

Hi!
I have the same problem and it happens each times I have a special char on an xml element.
In my case, this error started showing up just after the upgrade from the 7.1 to the 7.3.
I see it's a quite old thread, hope u found a solution

An internal error has occurred: *** Collection __NSArrayM: 0x610006051700 was mutated while being enumerated.

Doing a file export and i got this message..... it all sounds very exciting..but don't know what it means

It means you are running MacOS 10.10 and have hit a very common bug in the OS open/save dialogs, and that OS internal error bubbled back up into the application.
Apple is aware of this bug and working on a solution.
In the meantime, some people have avoided the problem by changing the view type (list, icons, etc.) in the OS open/save dialog.

HT1926 I keep receiving a message after attempting to download itunes on my new computer. It states that an error has occurred during installation before iTunes could be configured. Help please!

I have tried to download iTunes five times this afternoon to my new computer using both Fire fox and Explorer. Each time after it downloads I receive a message stating that an error has occured before the installer was able to be completed. I turned off the pop-up blocker like support suggested and I am running Windows 8.1, does anybody know how to fix this?

Follow the instructions of tt2 given in: https://discussions.apple.com/thread/5822086

SKPaymentTransactionStateFailed "An unknown error has occurred" in sandbox testing but earlier the sandbox was working good!

Hi I am getting error as the case:SKPaymentTransactionStateFailed is being hit and its showning "An unknown error has occurred" although the sandbox was working earlier fine as the case:SKPaymentTransactionStatePurchased was being hit earlier, but today I have tried all possible ways to get the sandbox working but unable to make the sandbox working again. Is it due to fact that today apple server is down???

i got same problem....

Sidecar.xml not uploading 'an error has occurred while loading sidecar.xml. Sidecar.xml is invald'

Hi all,
If anyone could throw some light as to why im receiving this error it would be hugely appreciated
'an error has occurred while loading sidecar.xml.
Sidecar.xml is invalid. Error #1090'
i've used this method for filling in all the fidly bits and ordering the folios for about a year now and never had any issues with it.. until i was about to publish our issue yesterday.... and of course a problem had to crop up..
I did update to the latest mandatory folio builder version, i wonder if this is the problem?
i have tried all the seeminly obvious solutions, logging in an out of the folio builder, resaving teh .xml file , restarting the computer. swearing.. none of them worked.. :S
Anyways thanks in advance

For the benefit of others searching for on this issue in the future, the problem was with the sidecar.xml document. One of the tags elements had an extra "<" in it, which resulted in the XML being malformed.
Neil

Sorry, a serious error has occured that requires adobe premiere elements to shut down. we will attem

So I've had premiere elements 9 for a while and it always worked just fine, but one day right in the middle of working on a project i get this error message:
sorry, a serious error has occured that requires adobe premiere elements to shut down.
Why did this come up? I know I've plenty of free space and everything! Please if you know how to fix it then help!
Some other info:
My computer runs on windows 7
Once again, the Premiere elements I'm using is 9
Please if you know what to do please help!

Yes Bill,
I too have been very errant in turning off the CA Vet Security system , it too causes problems .
Regards,
Bob

A communication error has occurred:An XML element was malformed(call to SP)

Similar Messages

Maybe you are looking for