A communication error occured, with the TREX TcpIp Server (Errorcode 2982)

Hi All,
We are in the process of Migrating our EP 5.0 --> EP 6.0. While upgrading TREX, I am getting following error:
"Error occurred during search: com.sapportals.wcm.WcmException: A communication error occured, with the TREX TcpIp Server (Errorcode 2982)
A communication error occured, with the TREX TcpIp Server (Errorcode 2982)"
Has any one came across this type of error ?
Software version details:
EP 5.0 SP6 Patch 1 Hotfix 8
CM SP 6 Patch 1 Hotfix 21
Trex (Earlier 6.0.0.0)---> TREX 6.0 SP 1 Patch 6 (6.0.1.6.0)
Regards
Sunil Kulkarni

Hello James,
Thanks for writing.
I am on Windows.
Now the problem is solved. I had also created a message with service market place for the above mentioned problem.
Solution: While upgrading the TREX, it has overwritten the "TREXIndexServer.ini", we restored it from the backup & the error was resolved.
Thanks & Regards
Sunil Kulkarni

Similar Messages

Error occurred with the POP3 mail server

When I first launch my email icon the following error pops up: An error occurred with the POP3 mail server. Mail server mail.midland-webhosting.com responded
What can I do so that I can access my email? Thanks!

Ok I will write lots and lots.
The mail server responded what is that question. You posted what looks like half the error message. So like you I do not understand. Those message have a second half that explains what the problem is.

Alerta An error occurred with the pop3 mail server. Mail server responded;

Boa tarde, ao receber email´s aparece a mensagem:
Alerta An error occurred with the pop3 mail server. Mail server responded;
Não utilizo gmail nem yahoo, outros usuários recebem normalmente os emails.
PAra enviar está normal sem problemas.
Obrigado.

Isto significa que o servidor requer uma autenticação segura e você não especificou, vá em '''Ferramentas''' >> '''Configurar contas...''' na sessão '''Servidor''' especifique um modo de autenticação e faça o teste novamente.

I get error message: "An error occurred with the publication of album...Authentication with server failed...whenever I open a facebook file in my iPhoto. In each file, most of my photos have disappeared. What do I need to do?

I get error message: "An error occurred with the publication of album...Authentication with server failed. Please check your login and password information" whenever I open a facebook file in my iPhoto. In each file, most of my photos have disappeared. I am hoping I can retrieve these "lost" files. What do I need to do?

Message was edited by: leroydouglas
better yet, try this solution:
https://discussions.apple.com/message/12351186#12351186

Moving files to another directory got an error message [File System Task] Error: An error occurred with the following error message: "Could not find a part of the path.".

Hi all,
I am having a list of files in a folder named datafiles and I am processing them one by one when I finish each one I want to move the file into a folder archive.
I am having a variable named filename and archivefilename and two fileconnections one is originalfiles and archivefiles
archivefilename=replace( @[User::filename],"datafiles","archive")
orginalfiles connection is an expression =@user:filename
archivefies connection is an expression=@user:archivefilename
the filename comes from reading the folder that contains those files
public void Main()
            string[] filenames;
            filenames = Directory.GetFiles(@"C:\luminis\datafiles\");
            Array.Sort(filenames);
            Dts.Variables["filelist"].Value = filenames;
            Dts.TaskResult = (int)ScriptResults.Success;
The folder c:\luminis\archive\ exists
why I am getting this error
My filesystem task : destinationpathvariable =false
destinationconnection:archivefile
overwrite=true
operation=movefile
issourcepathvariable=false
sourceconnection=original file
why am i getting this error[File System Task] Error: An error occurred with the following error message: "Could not find a part of the path.".
sohairzaki

there may be 2 problem...
1> specify a target directory only, not with the file name.
OR
2> Try using the unc,path format \\computername\sharename\
let us know your observation...
Let us TRY this | Mail me
My Blog :: http://quest4gen.blogspot.com/

I can't get rid of the message, n error occurred with the publication of album. It just keep coming back, and can't move around in IPhoto.

I can't get rid of the message, n error occurred with the publication of album. It just keep coming back, and can't move around in IPhoto.

Okay, folks, after a 3 1/2 hour phone call with a (very patient) telephone support person at Blackberry, here's what I learned.
You can check your USB drivers this way:
Plug in your phone into your USB drive. Assuming your Blackberry is "seen" by your computer...
Go into the Device Manager on your computer (control panel)
Expand the Universal Serial Bus controllers item on the bottom of the list
Right-click on BlackBerry Smartphone and choose Properties
Click on the Driver tab
Click on the Driver Details button
You should see one driver. I saw two. The one the BlackBerry likes is the RimUsb one.
So here's what NOT to do: We tossed the entire driver that was the "extra". This effectively made using my mouse and keyboard impossible, as they are USB, and sent my poor husband into the basement to find a million-year-old keyboard (and then a mouse) with the old fashioned kind of connectors (PS2). Bleh. Don't do that.
Here's what I did that worked (not saything this will work for you -- this modifies the Registry so better do a system backup with that backup and restore if you're nervous about this sort of thing):
From the start menu, choose run, and type regedit to get into the Registry editor.
Follow this file path: Computer, HKEY_LOCAL_MACHINE, SYSTEM, CurrentControlSet, Control, Class
Click on: {36FCE60-C465-11CF-8056-4445535400000}
If there's an item on the right called "UpperFilters", delete it. (see pictures)
Hope this helps someone.
Karin
First pic: shows "before"
Second pic: shows full file path and "after"

"An error occured with the AppleShare system"

Hi,
I'm running a shell script that fetchs files on an ftp server each 5 minutes. When an item is available it's copied on an AFP Server (AppleShare IP v6 or Windows 2000 depending of the name of the file). The shell script also check for the shares to be mounted and if not mount them. I also use an AppleScript (on idle) to dispatch the files in folders on the shares.
All runs perfectly but sometime - may be once or twice a day or once per week - the message An error occures with the AppleShare system (this is my translation of the french message Une erreur est survenue avec le système AppleShare) is displayed on the Finder preventing the AppleScript to do its work.
Any idea of how to resolve the problem or to trap it in the AppleScript ?
Regards,
Didier from France.
PowerMac G4 Mac OS X (10.3.9)

solved upgrading to Ma

An error occured with the publication of the album, an error occured with the publication of the album

Whenever i tried to open the photos in iphoto it return with the message "the error occured with the publication of the album". can anybody please help me? Thanks

Can you give us a step by step to the point where you get this message?

RRI Problem in EP - An error occurred with the report to report interface

I have a problem with a template: In standalone the RRI call works, in EP the same template fails with "An error occurred with the report to report interface during the jump" and details "Notification Number BRAIN 192"
The JS-code is: SAPBWOpenURL(targetLink);
In both cases (standalone, and in EP ) the targetLink is
/sap/bw/BEx?SAP-LANGUAGE=EN&PAGENO=1&CMD=RRI&RRI=X&RRI_RECEIVER=QURY0001&REQUEST_NO=2
However, standalone it works, in Portal it fails with the above message.
Any idea?

Hi Frank,
What was the solution?
Regards,

Keep getting the message "An error occurred with the publication of album - Do you want to remove the album from your library?" don't know why

I don't know why I keep getting the following messge for a recent album I created in iphoto:
"An error occurred with the publication of album (name of album). Do you want to remove the album from your library?" In smaller letters under that message, is "The feed could not be found or is invalid." There are 2 buttons to click - either "Remove Album" or "Keep Album". Never had this issue before, did not do anything different this time.
Mac OS X v. 10.6.8
iphoto 09 v. 8.1.2 (424)

Is this an album you're publishing as a MMe Gallery? If so delete the album and gallery, create a new album and gallery and try publishing again.
OT

An error occurred during the Network Policy Server use of the Extensible Authentication Protocol (EAP).

Hello everyone:
I know this question have been asked in these forums quite a few times. I apologize if it is a repeat telecast but I was not able to find a suitable solution pertaining to my problem.
I have a AP/SM setup that is configured to get EAP-PEAP authentication from Windows 2012 Server. I have setup everything and have verified that the EAP-PEAP authentication works fine on AP/SM by getting authentication from FreeRADIUS server. Now, when I try
to get authentication from Windows Server, I am getting a reject. The Event log shows this generic message:
Reason Code: 23
Reason:
An error occurred during the Network Policy Server use of the Extensible Authentication Protocol (EAP). Check EAP log files for EAP errors.
There is nothing in the EAP logs that is obvious too:
"USIL01PMPTST01","IAS",07/11/2014,11:59:44,1,"SANDBOX\test","SANDBOX\test",,,,,,"10.120.133.10",5,0,"10.120.133.10","Canopy_AP",,,18,,,,5,"PEAP_TEST",0,"311 1 10.120.133.1
07/11/2014 00:05:57 4927",,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
"USIL01PMPTST01","IAS",07/11/2014,11:59:44,11,,"SANDBOX\test",,,,,,,,0,"10.120.133.10","Canopy_AP",,,,,,,5,"PEAP_TEST",0,"311 1 10.120.133.1 07/11/2014 00:05:57 4927",30,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
"USIL01PMPTST01","IAS",07/11/2014,11:59:44,1,"SANDBOX\test","SANDBOX\test",,,,,,"10.120.133.10",5,0,"10.120.133.10","Canopy_AP",,,18,,,,5,"PEAP_TEST",0,"311 1 10.120.133.1
07/11/2014 00:05:57 4928",,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
"USIL01PMPTST01","IAS",07/11/2014,11:59:44,11,,"SANDBOX\test",,,,,,,,0,"10.120.133.10","Canopy_AP",,,,,,,5,"PEAP_TEST",0,"311 1 10.120.133.1 07/11/2014 00:05:57 4928",30,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
"USIL01PMPTST01","IAS",07/11/2014,11:59:44,1,"SANDBOX\test","SANDBOX\test",,,,,,"10.120.133.10",5,0,"10.120.133.10","Canopy_AP",,,18,,,,11,"PEAP_TEST",0,"311 1 10.120.133.1
07/11/2014 00:05:57 4929",,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
"USIL01PMPTST01","IAS",07/11/2014,11:59:44,3,,"SANDBOX\test",,,,,,,,0,"10.120.133.10","Canopy_AP",,,,,,,11,"PEAP_TEST",23,"311 1 10.120.133.1 07/11/2014 00:05:57 4929",,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
So, basically, the sequence is this:
request , challenge, request , challenge, request, reject
Any idea what might be happening?
Thank you.

Hi,
Have you installed certificates on the NPS server properly? Have you selected the proper certificate in the properties of PEAP?
Here is an article about the Certificate requirements of PEAP,
Certificate requirements when you use EAP-TLS or PEAP with EAP-TLS
http://support.microsoft.com/kb/814394
If your certificate matches the requirement, you may try to reinstall the certificate by export and import.
To export a certificate, please follow the steps below,
Open the Certificates snap-in for a user, computer, or service.
In the console tree under the logical store that contains the certificate to export, click
Certificates.
In the details pane, click the certificate that you want to export.
On the Action menu, point to
All Tasks, and then click Export.
In the Certificate Export Wizard, click No, do not export the private key. (This option will appear only if the private key is marked as exportable and you have access to the private key.)
Provide the following information in the Certificate Export Wizard:
Click the file format that you want to use to store the exported certificate: a DER-encoded file, a Base64-encoded file, or a PKCS #7 file.
If you are exporting the certificate to a PKCS #7 file, you also have the option to include all certificates in the certification path.
If required, in Password, type a password to encrypt the private key you are exporting. In
Confirm password, type the same password again, and then click
Next.
In File name, type a file name and path for the PKCS #7 file that will store the exported certificate and private key. Click
Next, and then click Finish.
To import a certificate, please follow the steps below,
Open the Certificates snap-in for a user, computer, or service.
In the console tree, click the logical store where you want to import the certificate.
On the Action menu, point to
All Tasks, and then click Import to start the Certificate Import Wizard.
Type the file name containing the certificate to be imported. (You can also click
Browse and navigate to the file.)
If it is a PKCS #12 file, do the following:
Type the password used to encrypt the private key.
(Optional) If you want to be able to use strong private key protection, select the
Enable strong private key protection check box.
(Optional) If you want to back up or transport your keys at a later time, select the
Mark key as exportable check box.
Do one of the following:
If the certificate should be automatically placed in a certificate store based on the type of certificate, click
Automatically select the certificate store based on the type of certificate.
If you want to specify where the certificate is stored, select
Place all certificates in the following store, click
Browse, and choose the certificate store to use.
If issue persists, you may try to re-issue the certificate.
For detailed procedure, you may refer to the similar threads below,
Having issues getting PEAP with EAP-MSCHAP v2 working on Windows 2008 R2
http://social.technet.microsoft.com/Forums/windowsserver/en-US/c66cf0a8-24dd-4ccd-b5bb-16bd28ad8d4c/having-issues-getting-peap-with-eapmschap-v2-working-on-windows-2008-r2?forum=winserverNAP
Hope this helps.
Steven Lee
TechNet Community Support

"An error occured with the boot selection verify media is present and retry" from OS Boot Manager

So I'm trying get my HP ProBook 6550p to boot Linux in UEFI mode.
Some sources say that OS Boot Manager points to \EFI\Microsoft\BOOT\bootmgfw.efi in your ESP, I've placed my EFI Shell there as a PoC test, which of course fails and errors out with the above message.
What am I doing wrong here?

That path would be for the Windows UEFI boot manager, which reads the \EFI\Microsoft\Boot\BCD database to get the boot configuration. In order to boot that path, the UEFI firmware has to be configured with that as the default.
If the computer firmware is not configured to boot efi, it will be trying to load the MBR and boot record.
A ufi shell would be in a path such as \EFI\Boot\ShellX64.efi. To get that to work there has to be a shell entry available at boot time. I have only gotten that to work once--and that was NOT on my g7-1117cl laptop.
I have been looking into this for my Pavillion g7-1117cl laptop, so far with no luck. I can boot into the diagnostics on the HP_TOOLS partition under the path \Hewlett-Packard\SystemDiags. This program has the name of SystemDiags.efi or SystemDiags32.efi. Since it can load that efi file it should be able to load bootmgrfw.efi. But it still needs to be configured in the firmware to boot to that file.

'An error occured with the licenisng of this product error code 213:19' I'm on a PC with windows 8 and this has never shwoed up before...

I've been using adobe photoshop and premiere for a few months now, It came with my PC and all of a sudden it stopped working? I also use Avid Media composer and it is also saying there is a problem with the licensing

Error 213:19 | Problem has occurred with the licensing of this product

Reason Code:23 Reason: An error occurred during the Network Policy Server use of the Extensible Authentication Protocol EAP

I get the above described error when trying to connect to NPS 2012 with a Windows XP machine
I successfully connecting to that server with an Android phone.
I started examining the problem and saw the following:
1. The android phone uses some cipher suites that are not supported in Windows XP and the one that theserver selects in the Server Hello message is Cipher Suite: TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA 0xc014
2. With the WINXP the selected cipher suite is Cipher Suite: TLS_RSA_WITH_AES_256_CBC_SHA 0x0035 and it fails with the above error.
3. Next step I did was to restrict the NPS to use only the Cipher Suite: TLS_RSA_WITH_AES_256_CBC_SHA 0x0035 and not to my surprise the Android phone could not connect and I was getting the same error as with the WINXP.
Any solution to this prpoblem?

Hi and thanks for replying
I do not believe there is a problem with the certificate as it uses the same certificate in both authentication processes - the failed one using the TLS_RSA_WITH_AES_256_CBC_SHA
cipher suit and the successfull one using TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
cipher suit - so I believe the reason lies elsewhere.
Please check it and try to produce a solution for it.
Thanks

I am trying to get to a website I go to daily and get the message: "An error occured with the SQL server This is not a problem with the IP Board but rather your SQL server." I have no idea what this error is or what to do about it.

I have tried clearing everything, rebooting, I just do not know what this actual error is. I was on the website, went back about 30 minutes later and that message. No other websites are bringing up this error.

If FCP captures the footage then capture with FCP and import the files into Premiere. Just a few extra clicks.
Or read this:
Cannot start DV or HDV video capture in Premiere Pro CS4 or later

A communication error occured, with the TREX TcpIp Server (Errorcode 2982)

Similar Messages

Maybe you are looking for