A communication failure has occurred. The server may be busy,...

Hello, I need help, please. Last week I bought a Curve 9300, it has v.5.0; bundle1576, platform .3.0.57.
Everything has been working fine, but today around 11 AM, I stopped receiving any emails on my phone. Both my work, and my personal email is delivered to my phone. I don't use the BES, but rather just send my gmail there; and work comes directly as well.
When I tried to reply to an email, a red X appeared; I've tried to resend it several times. Also, have tried to send myself email from home to my phone, and it doesn't arrive either.
I have gotten an error message on a different screen that says it's unable to connect to the server.
My phone works, my texts go through....can't figure it out.
I've restarted the phone several times. Also registered with host something or other (sorry can't remember what it was) and the message that my phone was registered successfully was delivered.
Any thoughts? Thank you in advance!

BBgal_leah wrote:
same thing happened to my blackberry curve 8520.
appreciate ur help.
I hope you've tried the suggestions posted above in this thread.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

FRM-9201 A failure has occured on server - Oracle forms error Oracle 9IAS

Hi,
We have a custom based Oracle Forms application running in Oracle9IAS in AIX5.1 Box. Last week There was A patch applied to AIX box [Security Patch LIBC] and after that, we are experiencing numerous issues like 1. process full, 2. too many open connections 3.Failiure occurred in server need to restart the session.
When we do a ps -ef in the server, we see lot of threads like "f90runm server webfile=HTTP-0 ". We remember, this was not the situation before applying the patch. When this count reaches approximately 260, users are not able to login and getting error. We dont have concurrent users more than 100. Can you please advise us how to resolve this problem. This application is running in the same environment for last 3 years without any problem, but after applying patch to UNIX box, it seems everything disturbed.

More Error details:-
FRM-92101 A failure has occured on the Server
you will need to reestablish your session
Details
Java Exception
oracle forms net ConnectorException the process file table is full
at oracle.forms.net.HTTPNStream.getinfoFromServlet(Unknown Source)
at oracle.forms.net.HTTPNStream.<init (unknown source)
at oracle.forms.net.HTTconnection.conenct(unknown source)
at oracle.forms.engine.FormsDispatcher initConnection(unknown source)
at oracle.forms.engine Forms Dispatcher init(unknown source)
at oracle.forms.engine.Runform.initConenction(unknown source)
at oracle.forms.engine.main.createRunform(unknown source)
at oracle.forms.engine.main.start(unknown source)
at sun.applet.Aplet panelrun(unknown source)
at java.lang.thread.run(unknown source)

Safari cannot open the page because the network connection was reset. the server may be busy

So i connect to my wifi through settings and it shows me having 3 bars but when i open safari it says "safari cannot open the page because the network connection was reset" What is wrong and how do i fix it?

1. Double-click the Home button to reveal Task Bar at bottom
2. Hold the Safari app down for a second or two until you see the minus sign
3. Tap the minus sign to close app
4. Re-launch the app and test
Note: If necessary close all apps in the Task Bar

FRM-92103: A network error or server failure has occurred.

Hello,
I always get this error after everytime i run a report my forms getting crash.
heres the jre console error :
Java Plug-in 1.6.0_33
Using JRE version 1.6.0_33-b05 Java HotSpot(TM) Client VM
User home directory = C:\Users\charles
Forms Session ID is formsapp.2
The proxy host is null, and the proxy port is 0.
Native HTTP implementation is being used for the connection.
The connection mode is HTTP.
Forms Applet version is 11.1.2.0
FRM-92103: A network error or server failure has occurred.
You will need to restart your application.
Java Exception:
java.io.IOException: Server returned HTTP response code: 503 for URL: http://application:8888/forms/lservlet;jsessionid=yjc6QfjGNkr8fjlyD26fZjqmwBGKkGVgG1L7s91X8y6rBsgGl650!-1255936909
     at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
     at oracle.forms.net.HTTPNStream.doPost(Unknown Source)
     at oracle.forms.net.HTTPNStream.doFlush(Unknown Source)
     at oracle.forms.net.HTTPNStream.flush(Unknown Source)
     at java.io.DataOutputStream.flush(Unknown Source)
     at oracle.forms.net.StreamMessageWriter.run(Unknown Source)
the http ohs1 server always hang i need to restart it again.
any help?

Michael Ferrante (Oracle) wrote:
I'm sorry, but I'm having a difficult time understand what you are saying...
What do you mean here? "... +if the forms run first then the report will not run it gives always this error+ ..." Are you loading the report results in the same browser that is running the form?
this will be the problem i should posted :
*2.1 Oracle HTTP Server Returns 503 Apache Bridge Failure Error While Toggling Between Forms and Reports*
While toggling between Oracle Forms and Oracle Reports applications through Oracle HTTP Server, you may see the "503 Apache Bridge failure" error. This is due to the wrong patch 12632886 being shipped with the Oracle Forms and Reports installer.
This document found in : http://docs.oracle.com/cd/E24269_01/doc.11120/e25445/install_upgrade.htm#BABHBABB
for those with oraclesupport find the document subject : Forms / Reports 11g Intermittent FRM-92103 Or "Failure of Server APACHE Bridge" - OHS Log Shows "apr_socket_connect call failed" [ID 1380762.1]
I downloaded the patch from
OPatch 12632886 (OHS-WLS COMMUNICATION NOT WORKING ON IPV6 ENABLED SOLARIS M/C [Patch ID 14069292]) for your Windows Platform from My Oracle Support
i successfully patched now its working.
thank you for your patience and help..
Edited by: ck on Aug 7, 2012 3:41 AM

FRM-92102: A network error or server failure has occurred.

Hi
I am trying to access a shared Vision instance in Solution Beacon. I am getting the below error while accessing forms
FRM-92102: A network error or server failure has occurred. The Forms client has attempted to reestablish its connection to the Server 1 time(s) without success.
java.net.MalformedURLException: illegal character in URL.
I am running on IE 8.0, JRE 1.6.0_43
Please help
Regards
Reem

re**** wrote:
Hi
I am trying to access a shared Vision instance in Solution Beacon. I am getting the below error while accessing forms
FRM-92102: A network error or server failure has occurred. The Forms client has attempted to reestablish its connection to the Server 1 time(s) without success.
java.net.MalformedURLException: illegal character in URL.
I am running on IE 8.0, JRE 1.6.0_43
Please help
Regards
ReemCan you reproduce the issue using a different browser or from a different machine?
Please contact "Solution Beacon" support since we don't maintain their environments.
Thanks,
Hussein

I have suddenly started getting "A Bluetooth Serial Failure Has Occurred" message suggesting the computer failed to open an RFCOMM serial channel: what do I do?

I have suddenly started getting "A Bluetooth Serial Failure Has Occurred" message suggesting the computer failed to open an RFCOMM serial channel: what do I do? This "opens" multiple times: three or four 'tiles.' It seems like the computer is looking for something, but can't find it. I'm not sure why this would start all of a sudden, but it concerns me. What should I do or what should I look for? Are there settings that need to be changed?

I have suddenly started getting "A Bluetooth Serial Failure Has Occurred" message suggesting the computer failed to open an RFCOMM serial channel: what do I do? This "opens" multiple times: three or four 'tiles.' It seems like the computer is looking for something, but can't find it. I'm not sure why this would start all of a sudden, but it concerns me. What should I do or what should I look for? Are there settings that need to be changed?

Since this morning when I try Software Updates and then Updates, I get a consistent message - An Error has occurred, The operation couldn't be completed. (NSURLErrorDomain error - 1012). Is this a server error and what do I do next?

Since this morning when I try Software Updates and then Updates, I get a consistent message - An Error has occurred, The operation couldn't be completed. (NSURLErrorDomain error - 1012). Is this a server error and what do I do next?
Please help!!!!!

Wait until Apple fixes this server issue.
Best.

TS4002 iCloud will not send to yahoo email addresses, and is stating SMTP transmission failure has occurred. Can anyone help ?

Hi, iCloud will not let me send mail to some yahoo accounts, stating SMTP transmission failure has occurred. Can anyone help ?.

Try two things
1. try to send mail from icloud.com - by that we eliminate possible problem on your device.
2. Sending mail to the same yahoo address from other email - that way we can eliminate or pinpoint problem with icloud smtp server. ( for that one you will have to give it a few hours, cause another server may give you delayed failure.)

A communication error has occurred while invoking commands in SharePoint host process

Hi All,
I am using Virtual box to connect to Sharepoint 2013 VPC. Due to an unexpected sutdown of my machine the VPC got some issue. Now I restored it using my bak up file. But after this when I deploy my sharepoint 2013 farm solution Iam getting the following error.
Error occurred in deployment step 'Recycle IIS Application Pool': A communication error has occurred while invoking commands in SharePoint host process: The server did not provide a meaningful reply; this might be caused by a contract mismatch, a premature
session shutdown or an internal server error.
What could be the issue? Any suggestions ?
Thanks in advance...
Regards
Nimisha
[email protected]

Hi Nimisha,
Seems that the original issue of communication error has been solved, for this new issue, it is recommended that you open a new thread which can make others easier
to focus on one issue in one single thread.
Best regards,
Patrick
Patrick Liang
TechNet Community Support

Not able to login PIA - An error has occurred. You may attempt to sign in again. If your attempt fails, please contact your System Administrator

One of the user is getting the below error when the person is trying to login ELM system. what could be issue for the specific user and how do we resolve this issue?
"Not able to login PIA - An error has occurred. You may attempt to sign in again. If your attempt fails, please contact your System Administrator"

Its works for other users, its only happened for one specific user only? I didn't check the APPSRV.LOG file? what needs to be checked in APPSRV.LOG, I can ask my infra team to check, because I don't have app server access to check log file.

#550 4.4.7 QUEUE.Expired; message expired ## With LastError "A storage transient failure has occurred during content conversion." In submission Queue. (Exchange 2013)

Greetings,
We seem to be having a problem with some users who are attempting to send e-mails from within the organisation to an external domain. Not all users are affected, and not all outgoing e-mails have this issue.
Some e-mails get stuck in the submission queue. This is the error message in Last Error : "A storage transient failure has occurred during content conversion."
Days later, the internal user who send the message gets a #550 4.4.7 QUEUE.Expired; message expired ## NDR.
We did have some initial configuration issues, but these were fixed more than a week ago :
- The external FQDN during EHLO was set to the wrong address, now pointing to the correct one.
- SPF record was updated with new IP adress.
Here is some additional information on the issue :
- Not on any blacklists - checked using dnsbl.info
- Telnet to remote servers works from exchange server, connections are accepted and can send mail.
- Outbound SMTP test ran using Microsoft Remote Connectivity Analyser : Passed with both External (Static) and Smarthost IP.
- This seems to happen only with emails that have an attachment and that are transfered, but only for the affected users.
- If content from these e-mails is manually copied over to a new email, email is sent to destination without problem.
Configuration information :
- Exchange 2013 running on Windows 2012 Datacenter with all latest updates.
- Outgoing e-mail is sent via smarthost. Only one outbound transport rule is active.
- Using internal DNS server.
- There is only one mailbox database.
Thank you for taking the time to read this!

On Wed, 16 Jan 2013 15:31:14 +0000, Ipigi wrote:
>Sorry, I often get some terms mixed up when I explain things as our users use the French version of outlook.
>
>E-mails are not transferred, but forwarded manually from their outlook. Message format in outlook is set to HTML and not Rich Text when they foward the e-mail.
Do they forward the message as an attachment?
>When forwarded internally, this is in the internet headers :
>
>Content-Type: application/ms-tnef; name="winmail.dat" Content-Transfer-Encoding: binary
Within your organization I'm prety sure that messages will use TNEF.
What does the message contain at the external recipient's side?
>It really seems to me that Exchange is not converting RTF to Plain Text. The first link you provided states in it's final paragraph that Exchange should be doing this conversion.
If you can, try creating a mail-enabed Contact for one of the external
recipients and set the message format on that.
>If I disabled TNEF as that link suggests, offending messages will get stuck in the submission queue again.
>
>I thank you for your help so far. This is not an issue I've had with any previous installations/migrations of Exchange that I have done.
>
>Please let me know if you need any additional information.
Have you tried UNsetting TNEF on the remote domain?
Set-RemoteDomain Default -TNEFEnabled $null
That should leave it up to the client to determine the format. It's
probably not what you're after, but see it makes a difference in the
format.
Rich Matheisen
MCSE+I, Exchange MVP
--- Rich Matheisen MCSE+I, Exchange MVP

Powerview Cannot connect to the server due to a security issue. The server may not have been able to match the host for silverlight

Hello,
I have a sharepoint 2010 sp1 CU Dec 2011 server with a SQL Server 2012 SP1 CU4 reporting services instance. I am able to open Power View and use it normally when bypassing the ISA Reverse Proxy server. However when going thru ISA I receive the
following Error.
Power View Cannot connect to the server due to a security issue. The server may not have been able to match the host for Silverlight. This error appears after I click yes on an Internet Explorer Display Mixed Mode prompt.
I've seen a couple references to this issue but not much. This one mentions a clientaccesspolicy.xml file but I haven't had any luck with that. http://connect.microsoft.com/SQLServer/feedback/details/716433/cannot-connect-to-the-server-due-to-a-security-issue-the-server-may-not-have-been-able-to-match-the-host-for-silverlight
Any Ideas? Thanks.
Ryan

Hi Ryan,
Based on my research, the issue should occur due to a by design behavior in Threat Management Gateway (TMG). To work around this issue, you can use SSL between the TMG and the SharePoint Web Server.
Hope this helps.
Regards,
Mike Yin
TechNet Community Support

A bluetooth serial failure has occurred?

Hi,
After playing around for a while, I finally got my Nokia N82 to work as a modem on my MacBook Pro using scripts from http://www.taniwha.org.uk
But after 30mins online I was disconnected and now if I try to connect again I get the following dialogue:
A bluetooth serial failure has occurred.
Failed to open an RFCOMM serial channel. Check if authentication needs to be enabled in your device.
The only thing I understand about this is the authentication part. My phone is set to automatically allow all connections from my computer.
Any idea what is going on?
Any help is appreciated.

I'll take a shot. Who is your cell phone provider? Did you look at the modem scripts in /Library/Modem\ Scripts for Nokia one(s). There are some. Possibly generic that would work. To make this simple, since it is late, #1 here is system log of my Panther and LG phone using one of above mentioned scripts.#2 And the link is an older one about doing the same type connection and the problems with Verizon. But then I never had same error message you got. I searched on that error and it appears that rfcomm can loop and the way to fix that is to bind to more channels which I am not sure how, since the only thing to change , it appears is in bluetooth preferences. I would not touch that, yet. The problem on configs, I believe, is the property is propriotory(spelling?). Or the channel is in the phone settings. Anyway I would try a different modem script in the Library and also check out the other links in #2.
#1
16 01:51:19 localhost pppd[6009]: Sent 14395 bytes, received 83280 bytes.
Oct 16 01:51:21 localhost pppd[6009]: Exit.
Oct 16 01:51:46 localhost pppd[6050]: pppd 2.4.2b1 started by root, uid 0
Oct 16 01:51:47 localhost /usr/libexec/CCLEngine: Starting Apple Verizon Support CCL
Oct 16 01:51:47 localhost /usr/libexec/CCLEngine: Connecting to Network
Oct 16 01:51:49 localhost pppd[6050]: Serial connection established.
Oct 16 01:51:49 localhost pppd[6050]: Using interface ppp0
Oct 16 01:51:49 localhost pppd[6050]: Connect: ppp0 <--> /dev/cu.usbmodem3B11
Oct 16 01:51:51 localhost pppd[6050]: local IP address 70.193.4.227
Oct 16 01:51:51 localhost pppd[6050]: remote IP address 66.174.27.4
Oct 16 01:51:51 localhost pppd[6050]: primary DNS address 66.174.92.14
Oct 16 01:51:51 localhost pppd[6050]: secondary DNS address 66.174.95.44
Oct 16 01:51:51 localhost configd[89]: posting notification com.apple.system.config.network_change
Oct 16 01:51:51 localhost mach_init[2]: Server 2227 in bootstrap d03 uid 0: "/usr/sbin/lookupd": exited as a result of signal
1 [pid 6030]
Oct 16 01:51:51 localhost configd[89]: executing /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/set-hos
tname
Oct 16 01:51:51 localhost lookupd[6053]: lookupd (version 324.13) starting - Thu Oct 16 01:51:51 2008
Oct 16 01:51:52 localhost set-hostname[6063]: setting hostname to doug-pennington-s-Computer.local
Oct 16 01:53:28 localhost pppd[6050]: Terminating on signal 15.
Oct 16 01:53:28 localhost configd[89]: posting notification com.apple.system.config.network_change
Oct 16 01:53:28 localhost mach_init[2]: Server 2233 in bootstrap d03 uid 0: "/usr/sbin/lookupd": exited as a result of signal
1 [pid 6053]
Oct 16 01:53:28 localhost configd[89]: executing /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/set-hos
tname
Oct 16 01:53:28 localhost pppd[6050]: Connection terminated.
Oct 16 01:53:28 localhost pppd[6050]: Connect time 1.7 minutes.
Oct 16 01:53:28 localhost pppd[6050]: Sent 6407 bytes, received 45234 bytes.
Oct 16 01:53:28 localhost lookupd[6067]: lookupd (version 324.13) starting - Thu Oct 16 01:53:28 2008
Oct 16 01:53:29 localhost set-hostname[6081]: setting hostname to doug-pennington-s-Computer.local
Oct 16 01:53:32 localhost pppd[6050]: Serial link disconnected.
Oct 16 01:53:33 localhost pppd[6050]: Exit.
#2 http://discussions.apple.com/thread.jspa?threadID=1691464&tstart=15

HELP: SMTP transmission failure has occurred

Hi there,
i would like to know what the following message means, because i dont know its because of my email or because of the recipient server.
This report relates to a message you sent with the following header fields:
Message-id: <[email protected]>
Date: Sun, 30 Jun 2013 14:19:42 +0000 (GMT)
From: Nick Pijl <[email protected]>
To: [email protected]
Subject: Vacature Commerciele vormgever
Your message cannot be delivered to the following recipients:
Recipient address: [email protected]
Reason: SMTP transmission failure has occurred
Diagnostic code: smtp;550 Date header far in the past/future.
Remote system: dns;smtp02.mx.p-client.net (TCP|17.172.220.238|64638|109.106.179.55|25) (smtp04.mail.provider.nl ESMTP Exim 4.80.1-56402 Mon, 10 Jun 2013 16:19:48 +0200)
Thanks in advance

Hi, their server seems fine, at least now, is your Date/Time & timezone set correctly?
SMTP session
[Resolving smtp01.mx.p-client.net...]
[Contacting smtp01.mx.p-client.net [109.106.179.56]...]
[Connected]
220 smtp04.mail.provider.nl ESMTP Exim 4.80.1-56402 Mon, 10 Jun 2013 19:47:56 +0200
EHLO Network-Tools.com
250-smtp04.mail.provider.nl Hello Network-Tools.com [67.222.132.205]
250-SIZE
250-8BITMIME
250-STARTTLS
250 HELP
VRFY info
252 Administrative prohibition
RSET
250 Reset OK
EXPN info
550 Administrative prohibition
RSET
250 Reset OK
MAIL FROM:<[email protected]>
250 OK
RCPT TO:<[email protected]>
250 Accepted
RSET
250 Reset OK
QUIT
221 smtp04.mail.provider.nl closing connection
[Connection closed]

When I publish my site on one specific page where i've added {tag_pagecontent} I get the error:Some files on the server may be missing or incorrect. Clear browser cache and try again. If the problem persists please contact website author.

When I publish my site on one specific page where I've added {tag_pagecontent} I get the error:
'Some files on the server may be missing or incorrect. Clear browser cache and try again. If the problem persists please contact website author.'
I'm trying to get a blog module going, I've even deleted the html insert bog with the tag in and re-published which then I don't get the error but as a result no blog either. But then I add the tag in again and publish the error comes back. I've used the dev console and it says that my musicians sample.css is out of date but why is it only out of date when I add in html to my muse site?
HELP!!!! I've searched other threads and to no avail I'm publishing so no direct ftp going on. the only thing I changed in business catalyst was the module stylesheet in order to style the blog. I've tried uploading and replacing all files nothing seems to work. the site is here:
http://www.musicstudentsforhire.co.uk/musicians-samples.html
It's only this page as it has the blog on. Also I've noticed when I've re-published occasionally it will show the mobile version on my desktop and not the desktop version??? no idea why that's happening so I've had to turn that off. any explanation on why that is happening would also be much appreciated.

I haven't received an answer as of yet, I'll post t on here when I do. I de-activated the mobile site because it's my clients site so he needs it to be operational during the day. I hope someone gives me an answer soon.

A communication failure has occurred. The server may be busy,...

Similar Messages

Maybe you are looking for