A correct suite number is needed for delivery. UPS is attempting to obtain this information.
A correct suite number is needed for delivery. UPS is attempting to obtain this information.
WhT should i do?
I don't know how that's related to using an iPod shuffle (this user discussion forum category). If this is regarding delivery of a purchase, you should probably contact an Apple or UPS customer support rep.
Similar Messages
-
Would Like to Get Report of Daily Emails In and Out from Members to a DL
Exchange version : 2007
I am the supervisor for the group and want to quantify this information. I do not need to see the content, just quantity
is it possible ?Well, distribution groups don't really have a concept of "in" or "out". They only serve to distribute messages sent to them -- unless you're asking to know who was a member of the distribution group at the time a message was sent to the DL.
Message tracking logs hold the information you want, though. You'd have to look for EXPAND events that reference the distribution group and take the sender's e-mail address from that event. If the DL is a simple one that's not a member of any other groups
you could also look for RECEIVE events sent to the e-mail address of the group and get the sender's name from that event.
You can use Powershell extract the rows of data from the logs, but you'll have to write the code to get the data out of those rows and into a format you want. Perhaps LogParser could be useful in place of Powershell?
--- Rich Matheisen MCSE&I, Exchange MVP -
IiPod serial number stored in iTunes, can anyone advise how I find this information for my insurance company?
Juliebathgate wrote:
IiPod serial number stored in iTunes, can anyone advise how I find this information for my insurance company?
Hi,
If you have made a backup at any time of your iPod in iTunes, it should be in Preferences, under Devices tab.
In iTunes
Open iTunes Preferences.
From the Preferences window click on the Devices.
Once you are there you should see a list under "Device Backups:".
Hover your mouse pointer to the device and in a little while it should display the serial number of the device (with an iPhone it will also display a phone number used with it and the IMEI code and with an iPad it will display the IMEI in addition to the serial number).
A pircture of where it can be found: http://km.support.apple.com/library/APPLE/APPLECARE_ALLGEOS/HT4946/en_US/HT4946- devices-iphone-001-en.png -
Where can I find the GPS coordinates in iPhoto 11 for geotagged pics? In iPhoto 09 this information was available under the Photos menu "Show Extended Photo Information".
I think you can only see the map. To see the actual EXIF data you would need to export and use a viewer.
-
Table name and field name needed for delivery note
Hi Experts
I need to extract the following fields for Delivery.
company code
Sales organization
plant code
shipping point
DDL No (VBELN)
Sales order
Customer PO
Customer request date
planned GI date
sold to code
ship to code
ship to name1
ship to name 2
ship to address1
ship to address2
ship to address3
DDL Line item(posnr)
matnr
DDL Doc. date
DDL Doc. Created by
anybody knows the field name and table name for above fileds pls help me.Hi,
It is possible to get the data ship-to adress of delivery.
step1:
Go to LIKP table which is header data.Select the record from DB for delivery you want into one field string.
step2:
Get the customer number of the ship-to party (in field KUNNR IN LIKP Table) into one variable.
step3:
Using that customer number you can get the address of ship-to party of particular delivery in KNA1 table.
Here is some peice of code.
TABLES: kna1 , likp.
PARAMETERS: p_del TYPE likp-vbeln.
DATA:
w_ship_to_num TYPE likp-kunnr.
SELECT SINGLE * FROM likp
WHERE vbeln EQ p_del.
w_ship_to_num = likp-kunnr.
SELECT SINGLE * FROM kna1 WHERE kunnr EQ w_ship_to_num.
WRITE : 'Name :' , kna1-name1,
'City :' , kna1-ort01,
'State :' ,kna1-regio. -
Suite Product Activation Needed for Acrobat after uninstalling CS4 for CS5 upgrade
I've done a download for CS5. It did have the download for acrobat but it didn't install as it wasn't required as I've got CS4. However, I needed to unistall CS4 to create more disc space. Now the acrobat dopesn't work. I went back to download and tried to download the CS5 (although I know it's the same) because it keept shutting dpwn aftyer an error stating that it's a suite product and needs activating - blah blah blah open photoshop or another suite component - nothing. How'd you get this working, please?
JaneAnswered in the other thread.
Bob -
UK Skype Number - no need for country code?
Hi
Just bought a UK Skype Number here in Oz.
Just double checking that for family in the UK, they just need to enter the 11 digit Skype number, not the UK country code as well- because it is an online number (eg. 0113 not +44 113 etc)??
Dont want to send the number out there incorrectly or give them uneccessarily long number to dial!
Thank you.Did you hear back on this - same question here...
-
Serial number not valid for Acrobat XI, how do I fix this?
I get an error validating my serial number for Acrobat XI on my windows 8 laptop. How do I fix this? Running 64bit.
Hi AbbyR,
Welcome to Adobe Forum
I can see that you have upgrade version of Acrobat pro 11, it is asking for previous qualifying serial number, a case has been assigned regarding this 0212208202.
I am going to mail you the serial number required & which is registered under your email ID. Please enter that serial number & let me know if it worked.
Regards,
Rajshree -
forumnotifierNewsgroup_User@
Go into your operating system and find a folder whose name ends with Previews.LRDATA. Delete this folder. Don't delete anything else, just the folder named as I said.
-
Need for speed runing on the pre is this real palm????
http://www.youtube.com/watch?v=hCVnxXvEAPo
Post relates to: Palm m100Yes, it is a real video playing!
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked! -
User exit for delivery creation in VL10B/VL10G-
Hi,
Is there any exits available for restricting the document type while the deliveries are selected/processed using VL10B/VL10G - delivery creation in background.
Scenario is when deliveries are created for STO's,the delivery is to be created for a selected document types(EKKO - BSART).Other types of document types have to be ignored when the delivery is created in background.
Regards
DeepakHello Deepak
You handle this through configuration while setting up Stock Transport Orders in MM.
Path: IMG/Materials Management/Purchasing/Purchase Order/Set up Stock Transport Order/Assign Delivery Type and Checking Rule
Here you a Delivery type for a combination of Plant and PO type. So those PO types which you don't want to be included for delivery creation will not figure in this assignment. I don't think you should go down the user exit route.
If you still need to explore user exits, look at OSS note 198137 for a list and purpose of VL10X based exits.
Hope this helps. -
Reg : change pointer mechanism for triggering the IDOC for delivery note
Hi ,
I am working on a change pointer mechanism for triggering the IDOC for delivery note and will be using this message class DESADV.
So SAP has suggested for assigning the message class DESADV with the function module in MASTERIDOC_CREATE_SMD_DESADV in BD60 transaction code.
So I was looking to create this MASTERIDOC_CREATE_SMD_DESADV function module in SAP and SAP suggesting that we should create this MASTERIDOC_CREATE_SMD_DESADV function module as same as the function module MASTERIDOC_CREATE_SMD_MATMAS.
So do anyone knows that is there any tool has been provided by SAP for creating this function module MASTERIDOC_CREATE_SMD_DESADV in SAP system for triggering the change pointer mechanism for outbound Delivery.
Thanks !
Regards,
KiranHi,
When you are change pointer the system itself will take care of sending the changed master data to your partner system and the user will not have any intervention. If you really wanted to have that then you need to use the change pointers to read the master data which is modified in a custom program and then display that on the screen. Once the user selects that master data records then trigger an IDOC for creating the idoc for that master data and also flag that master data record as processed in the SAP BDCPS standard table, so that the same record will not be picked. If you wanted to know how the change pointers piece of code is written go through the program RBDMIDOC and you can understand how the change pointers logic is written.
Thanks,
Mahesh. -
Stock data of serial number not suitable for movement
We have a situation where we have had to put some serialized parts on a rework production order. When we are trying to bring them back into stock, we're getting a message that says "Stock data of serial number not suitable for movement." I'm guessing that this is because this serial number had existed in stock before (since this is a rework of an existing material/serial number.) We need to receive this back into stock using this same serial number. How is that possible?
Thanks in advance for your help.
SybilDear,
Please refer these threads,
Re: Removing Serial number Profile
IQ02 Shows Blocked Stock for Serial Number
Hope it will help you.
Regards,
R.Brahmankar -
"BAPI_GOODSMVT_CREATE" for delivery
Hi
I have found a BAPI "BAPI_GOODSMVT_CREATE" , I want to use it for delivery, now I have given all relevant information, but I get an error " Goods movement not possible with mvmt type 653", The order type is ZGOR, is the movement type not correct? Please suggest.Truly, you should read the note...however some hints :
- GM_CODE is translated to a TCODE transaction code via table T158G
1 MB01 Post Goods Receipt for PO
2 MB31 Goods Receipt for Production Order
3 MB1A Goods Withdrawal
4 MB1B Transfer Posting
5 MB1C Other Goods Receipts
6 MB11 Goods Movement
7 MB04 Subsequ.Adj.of "Mat.Provided"Consmp.
- Allowed movement code by transaction codes are in table T158B
653 VL01 Create Delivery
653 VL01N Create Outbound Dlv. with Order Ref.
653 VL01NO Create Outbound Dlv. w/o Order Ref.
653 VL02 Change Outbound Delivery
653 VL02N Change Outbound Delivery
653 VL03N Display Outbound Delivery
653 VL08 Confirmation of Picking Request
So i fear that this BAPI cannot be used here, perform some search on [BAPI_OUTB_DELIVERY_CREATE_SLS|http://www.sdn.sap.com/irj/scn/advancedsearch?query=bapi_outb_delivery_create_sls]
Regards,
Raymond -
Ports/vlan w/o need for acl
On a port or vlan that doesn't need acl filtering is it more effecient to have nothing or a single permit ip any any? I understand that there's a default implied deny ip any any to block anything not allowed in a proceeding permit statement but I assume that only applies if an acl is assigned so I would think if you're going to just permit ip any any in an acl with out any denying before it i's better not to waste any processor time running packets through an acl filter since there's nothing to be rejected anyway.
Hi Vini, if I interpret correctly, there is no need for an acess list as it just takes system resources for no need.
-Tom
Please mark answered for helpful posts
Maybe you are looking for
-
My 120GB IPod classic is not recognized by my Windows 7 PC. When I plug the ipod into my computer I receive a message saying that the USD device is not recognized. The Device Manager lists it as an Unknown Device. I've tried uninstalling iTunes an
-
Apps on downloading and updating are stopped with waiting message from yesterday. iPad is working and I can buy app still but can't complete download. My credit card is working ok with other account with other device. I deleted some heavy apps Power
-
ALV Grid Total Text (OOPS)
Hi All, I have a simple ALV Grid Report(OOPS), I would like to give a Text for Total Row. In REUSE_ALV_GRID we have the option of giving this text, but i am not able to figure it out how to get the same in OOPS. Regards Anup
-
Hi, Is there a way to handle multiple keyfigures in BPC in one application? Please help me understand Thanks
-
How do i find & remove duplicated source .jpg files?
i have a number of duplicate copies of .jpg picture files which, when imported into iphoto, are fairly easy to identify as duplicates, thus cleaning up my iphoto library. however, i would like to remove the duplicate source files as well just to tidy