"A critical error has occurred while running the virtual machine and the machine execution has been stopped"

I have the following error:
"A critical error has occurred while running the virtual machine and the machine execution has been stopped"
When I am installing grid clusterware and when is copying files from one node to other I received that virtualbox error and is stop working.
Can somebody give me any hint how to solve it ?
Thank you
Eugen

I think that is not a Clusterware issue, The clusterware installation may generating a high load on your machine and Virtual Box is not supporting.
Check vbox.log file to identify root cause.

Similar Messages

  • HT201263 An error has occured while updating software. Connecting to the server is slow and games etc only run for 60 seconds

    An error has occured while updating software. Connecting to the server is slow and games etc only run for 60 seconds

    Have you tried resetting your iPad? You may have to restore again if there was a problem.
    Try the reset first.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • Cannot access Adobe Folio Builder using Indesign (CS6) on Windows 7, error message is 'An error has occured while trying to sign in to the Folio Builder Panel' [IMS_ERROR_FAILURE]

    Cannot access Adobe Folio Builder using Indesign (CS6) on Windows 7, error message is 'An error has occured while trying to sign in to the Folio Builder Panel' [IMS_ERROR_FAILURE]

    Yes, I can open the DPS portal via the Folio Builder panel within InDesign. Although I have created Folios locally within InDesign CS6, the DPS portal is empty and everthing greyed out with just the text "There are no folios to display. Create folios with the folio builder in InDesign".
    If I try to sign in within the Folio Builder panel in InDesign, I get the error message [IMS_ERROR_FAILURE] . In addition I am also not able to access the "Help" menu from within InDesign although I am connected to the internet.
    To complicate it even further, I am working in the UK whereas all internet control (firewall) and licences are handeled by head office in Germany. I am not sure if this is a firwewall issue or not but if the IT department in Germany could get support from Adobe to understand the access requirements, this may help.
    Hopefully using the forum someone out there will know the answer.

  • Keep getting an error message that reads, "LR An error has occurred while creating the book on Blurb" An error has occurred while trying to create texts and fonts.  Pleas advise as Blurb has said that it's a LR issue.

    Keep getting an error message that reads, "LR An error has occurred while creating the book on Blurb" An error has occurred while trying to create texts and fonts.  Pleas advise as Blurb has said that it's a LR issue.

    Are you behind a firewall or double NAT??
    What is the device that is immediately plugged into the main modem or router? Has that one been able to update?
    It is plugged in of course isn't it.. no nasty join wireless anywhere??
    The best way to work around these sort of problems is to simplify the network.. Plug each device directly into the main router.. by ethernet. You can trigger the firmware upgrade by wireless but use ipad or iphone version of airport utility and see what happens.

  • What are the common errors that occur while extraction is carried out?

    Hi all,
    What are all the errors that occurs while extraction for fico, sd and mm?
    Can anyone list me the errors along with the solution.
    regds
    hari

    Hi hari shankar 
    It depends
    Like the data level errors ,Short DUmps
    USER EXIT ERRORS
    some time source system code errors.
    Hope itz clear a little atleast...!
    Thanks & Regards
    R M K
    ***Assigning pointz is the only way of saying thanx in SDN ***
    **Winners dont do different things,they do things differently**
    > Hi all,
    >
    > What are all the errors that occurs while extraction
    > for fico, sd and mm?
    >
    > Can anyone list me the errors along with the
    > solution.
    >
    > regds
    > hari

  • Getting an error while configuring VMM for System Center 2012. error - An internal error has occurred trying to contact an agent on the WIN-NTJU8CNU server: : . Ensure the agent is installed and running.

    Hi,
    I am trying to install "System Center 2012 - Virtual Machine Manager by Using a Pre-Configured VHD".
    I downloaded install guide & the binaries from http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=10712
    I have followed the installation document & getting an error while configuring VMM for System Center 2012.
    error details from log file given below:
    01:12:24:VMMPostinstallProcessor threw an exception: Threw Exception.Type: Microsoft.Carmine.WSManWrappers.WSManProviderException, Exception.Message: An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
    Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
    01:12:24:StackTrace:   at Microsoft.Carmine.WSManWrappers.ErrorContextParameterHelper.ThrowTranslatedCarmineException(WsmanSoapFault fault, COMException ce)
       at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.RetrieveUnderlyingWMIErrorAndThrow(SessionCacheElement sessionElement, COMException ce)
       at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
       at Microsoft.Carmine.WSManWrappers.AgentManagement.AssociateLibrary(WsmanAPIWrapper wsmanObject, String CertificateSubjectName, String& ExportedCertificate, ErrorInfo& ErrorInfo)
       at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateAgentServer(String fullyQualifiedServerName)
       at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateDefaultLibraryServer()
       at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.SetupLibraryShare()
       at Microsoft.VirtualManager.Setup.InstallItemCustomDelegates.PangaeaServerPostinstallProcessor()
    01:12:24:InnerException.Type: System.Runtime.InteropServices.COMException, InnerException.Message: There is a time and/or date difference between the client and server.
    01:12:24:InnerException.StackTrace:   at WSManAutomation.IWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
       at Microsoft.Carmine.WSManWrappers.MyIWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
       at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
    01:12:24:ProcessInstalls: Running the PostProcessDelegate returned false.
    01:12:24:ProcessInstalls: Running the PostProcessDelegate for PangaeaServer failed.... This is a fatal item.  Setting rollback.
    01:12:24:SetProgressScreen: FinishMinorStep.
    01:12:24:ProcessInstalls: Rollback is set and we are not doing an uninstall so we will stop processing installs
    I have completed MSSQL server configuration and while configuring VMM the below error displayed in the wizard:
    An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
    Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
    I have checked that the following services are running:
    1) Verified WS-Management srvice 2) MSSQL server + MSSQL (agent)  3)SC VM Manager Agent  4)  Windows management instrumentation .
    I have joined the VM (on which installing SC VMM) in a domain(as per install guide) and installing VMM using domain account & it is in local Administrators group.
    Also I would like know if there is any stand alone SC VMM installer. If yes then please let me know the installer location & install guide.
    thanks.
    ====

    Have you installed AppController on the same machine with VMM?

  • An error has occurred while accessing SQL database or system resources. If this is the first time you have seen this message, please try again later. If this problem persists, please contact your administrator.

    I have SP Server 2010, and when I try to DELETE a rule within an existing Audience, "Property (Account Name) = domain/username", I get this error, "An error has occurred while accessing SQL database or system resources. If this
    is the first time you have seen this message, please try again later. If this
    problem persists, please contact your administrator."  When I try to "MODIFY" the rule I get this error, "One or more values typed on this page are not valid. Check the text for the indicated fields." 
    The last time I checked it was working, I'm not aware of any new updates installed recently?  I did a full Profile Synchronization as well, but still not working, please advise? -- Evenstarline

    Hi Sara,
    First of all thank you very much for your prompt responses. Here are my comments to each of your suggestions below, and just to let you know I am using a Farm Admin account.  I
    was able to do this way after we upgraded from SP 2007 to SP 2010 as well.   I would like to mention I'm not a SP expert, just been given the responsibility due to another person handling it just left, so apologize with some of
    my novice questions below?
    1. When I change the Operators to "Contains" or "Not Contains" get generates this error below.
         Error generating in red towards top of the audience page..."One or more values typed on this page are not valid.  Check the text for the indicated fields."
         Error occurred where you enter your "Value"..."Could not resolve the user identity. Please re-enter the account name."
    2. We have a 3-server-tier topology (SPWeb, SPDB, and SPFarm).  Does the updates only apply to where the Central Admin is installed, which is the "SPFarm"?  I checked all
    3 servers, and NONE of the updates (KB2899494, KB2889845, and KB2883055) you'd mentioned are installed.
    3. I'm new to IISRET, I need to be extra cautious of what I run in production, is this safe to run with no problem?  What does it do?  And How do I run it?
    4. I'm also new to viewing the ULS log.  I'd just downloaded a viewer for it.  I'm assuming the only logs I need to be concern with viewing are within the SPAdmin (where Central
    Admin is installed)?  There's so many of them, what should I be looking for exactly?
    Evenstarline 

  • A critical program error has occured while opening workbook

    Dear friends,
    A critical error has occured while opening workbook. The issue is that the same workbook is opening in some one machine but not in others.The following Dialog box is poping out when tried to open workbook:
    "A critical program error has occured.The Program will now terminate.Please refer to trace for further information."
    However,i  did the full updation of service pack3 of MS Excel 2003 on my machine and the same version as on that particular machine(on which workbook is opening). The problem is still there.Please provide some solution.
    Thankx a lot in advance!!!
    regards,
    Sandeep Singla

    The machine where the workbook is opening has a GUI :-
    Release : "710 Final Release"
    File Version : 7100.2.7.1038
    Build : 967944
    Patch Level : 7
    and the machine where the critical program error is coming has a GUI :-
    Release : "710 Final Release"
    File Version : 7100.2.8.1039
    Build : 983952
    Patch Level : 8
    The Excel 2003 are similar in both the machines as the service pack3 has been installed in the machine where workbook was not opening.
    Any help will be appreciated.
    Thanks and Regards,
    Sandeep Singla

  • No Data Shown because an error occurred while running the query

    Discoverer 10gR2 using Plus on Firefox:
    I have one workbook. The first sheet summarizes by Vendor. Parameters are Type, Category, Vendor (all optional) and mandatory date range.
    The second sheet summarized by Vendor and Model. Parameters are Type, Category, Vendor, Model (all optional) and mandatory date range.
    All parameters except the extra "Model" are shared between the sheets.
    When I run the Vendor sheet, parameters pop up, I put in dates and leave the rest blank. Results display. Yeah!
    When I then run the Model sheet, parameters pop up again (because it has one more parameter). Dates carry forward, leave the rest blank. I get the error No Data Shown because an error occurred while running the query. Refreshing does not help.
    If I click back to the Vendor sheet, then come back to the Model sheet, no parameter screen and the query runs.
    Booooo.
    Have tried multiple DBs, multiple EULs, multiple underlying data sources, replacing the offending parameter with a whole new one, no difference.
    Has any body run into this behavior? Is there an answer?
    -- Ron Olcott, Business Intelligence Product Manager

    What about trying this. On the parameter definition, you have a section on the bottom left of the Parameters window, called "Do you want to allow different parameter values for each worksheet?". When you say in your posting that all but the Model parameter is shared, I assume you mean that you have set this section value to "Allow only one set of paratmeter values for all worksheets". Try setting this to "Allow different parameter values for each worksheet". See if that might make a difference for you. If that works, you may have to leave the option at this, as the lesser of your evils. From my limited experience, the "Allow only one set of parameter mvalues for all worksheets" is a bit flaky in how it works. So I pretty much have gone to always saying to allow different parameter values for each worksheet. Hope this helps a bit. If worse comes to worse, if you have not done so already, log a service request with support and see what they say. Good luck.
    John DIckey

  • An error has occurred while loading the report

    Hello all,
    I'm trying to view a Crystal Report from my CRM application and I receive the follow error message, but only when trying to view it on a laptop:
    An error has occurred while loading the report. Please contact technical support.
    Has anyone else run into this problem?
    Thanks!

    Hello Eddie,
    please post some more information about your problem.
    What is the name of your CRM app?
    Who developed this app?
    Did it never work or do you get this error only now?
    Always or only sometimes only?
    In what versions and on what patchlevel are you working ?
    Thanks for some more info
    Falk

  • An error has occurred while attempting to load the CR in hosting

    I deployed my asp.net with crystal report in hosting server...
    They have installed Crystal Report Basic Runtime for Visual Studio 2008.(10.5.3700.0) on windows server 2008 OS X64..
    I developed my asp.net application with visual studio 2008 in xp machione x86 now on deploying this im getting the following error on hosting server, in my local server it works fine..
    The error:-
    An error has occurred while attempting to load the Crystal Reports runtime.
    Either the Crystal Reports registry key permissions are insufficient or the Crystal Reports runtime is not installed correctly.
    Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required.  Please go to http://www.businessobjects.com/support for more information.
    They have installed 10.5.3700.0 runtime on server still why this error...?

    You probably installed the 32 bit runtime (x86) but are running the application in 64 bit mode.  I think you are using a web app, so you need to do one of two things, install the x64 version of the runtime or switch the application pool for your website to run in 32 bit mode.

  • An error occurred while running the Inventory agent in InventoryEnforcer

    2007.03.07 15:00:00 [Console:SERVMAN SCHEDULED ITEM] Inventory Agent:
    Found KeyValuePair in INVSETUP.INI, agentRuns = Subscriber
    2007.03.07 15:00:00 [Console:SERVMAN SCHEDULED ITEM] Inventory Agent:
    Found KeyValuePair in INVSETUP.INI, forceDebug = false
    2007.03.07 15:01:12 [Console:SERVMAN SCHEDULED ITEM] Clean the
    Inventory Agent
    2007.03.07 15:01:12 [Console:SERVMAN SCHEDULED ITEM]
    Inventory(InvAgent):Mar 7, 2007 3:01:12 PM: An error occurred while
    running the Inventory agent in
    InventoryEnforcer:EnforcePolicy(Distributed Server Package
    ServerX:General:Server Inventor.Pol.ZEN.BO.ORG)
    2007.03.07 15:01:12 [Console:SERVMAN SCHEDULED ITEM] MESSAGE - Policy
    processed successfully : Distributed Server Package
    ServerX:General:Server Inventor.Pol.ZEN.BO.ORG
    2007.03.07 15:01:12 [Console:SERVMAN SCHEDULED ITEM] Policy has been
    flagged to prevent future scheduling : Distributed Server Package
    ServerX:General:Server Inventor.Pol.ZEN.BO.ORG
    I have reinstalled de ZfS 7SP1 Inventory Agent on the server.
    Did not help.
    Recreated the Distributed Server Package with only Server Inventory
    Policy enabled. And succesfully distributed it to the subscriber.
    Did not help.
    Restarted server, did not help ;-)
    Checked if INVNATVE.NLM, INVAID.NLM and MPKSCAN.NLM are installed. OK
    Inventory Policy is referred to sane Inventory Service object as
    workstation inventory policy
    Inventory Service on root service has Machines Attached option
    enabled.
    Workstation inventory works fine from all our 36 locations.
    Server inventory i am testing from one location.
    We have Netware 6.5 SP5 with ZfD and ZfS 7 SP1 on all our locations.
    Greetings from the Netherlands,
    Michel Woltjer

    Michel,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
    - Check all of the other support tools and options available at
    http://support.novell.com.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://support.novell.com/forums)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://support.novell.com/forums/faq_general.html
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • SAP MII 14.0 SP5 Patch 11 - Error has occurred while processing data stream Dynamic Query role is not assigned to the Data Server

    Hello All,
    We are using a two tier architecture.
    Our Corp server calls the refinery server.
    Our CORP MII server uses user id abc_user to connect to the refinery data server.
    The user id abc_user has the SAP_xMII_Dynamic_Query role.
    The data server also has the checkbox for allow dynamic query enabled.
    But we are still getting the following error
    Error has occurred while processing data stream
    Dynamic Query role is not assigned to the Data Server; Use query template
    Once we add the SAP_xMII_Dynamic_Query role to the data server everything works fine. Is this feature by design ?
    Thanks,
    Kiran

    Thanks Anushree !!
    I thought that just adding the role to the user and enabling the dynamic query checkbox on the data server should work.
    But we even needed to add the role to the data server.
    Thanks,
    Kiran

  • Im trying to convert a PDF into an excel document and I keep getting an error message that reads "An error has occurred while trying to access the service". WHat am I doing wrong?

    Im trying to convert a PDF into an excel document and I keep getting an error message that reads "An error has occurred while trying to access the service". WHat am I doing wrong?

    it seems my subscription had expired so I signed up again.. It was still having trouble so I repeated the sign up process again.. Then it worked perfectly.. Unfortunately, I think I just subscribed twice and need to cancel one of them. Ugh. Such a pain when I'm trying to get this project completed. I'll be canceling at least one of the subscriptions in the morning. Adobe is not my favorite company right now. None of this was intuitive. And trying to get help was an absolute waste of an hour.
    Regards,
    Nathaniel
    [removed by moderator]

  • Configure Synchronization Connections An error has occurred while accessing the SQL Server database

    Hi,
    i am getting following error message
    Central Administration --> Synchronization Connections
    An error has occurred while accessing the SQL Server database or the SharePoint Server Search service.
    If this is the first time you have seen this message, try again later. If this problem persists, contact your administrator.
    Central Administration -->  Manage Profile Service: User Profile Service Application --> Manage User Properties
    Error
    An unexpected error has occurred.
    Troubleshoot issues with Microsoft SharePoint Foundation.
    Correlation ID: 3bce5a11-f2dc-4788
    Please tell how to fix it.
    iffi

    Event ID 5555 -> i have change the Timer jobs recycling time AM to PM
    for  User profile page not display  number of count in the page first check services , connection , 
    IISRESET /NOFORCE   /  timer services restart 
    Deepesh Yevle MCTS

Maybe you are looking for

  • Registration error in Jdeveloper while registering the portlet

    Hello All, As per the Tutorial for Oracle WebCenter Developers 11g Release 1 (11.1.1) E10273-01 guide . I am creating the sample application. I have created the portlet and deployed it on integrated weblogic server and created the connection too in t

  • Address Book Images?

    Has anyone been able to get their contact images from Address Book to sync with their iPhone? It appears that in order to have a caller ID image you currently have to take a new one via the iPhone camera unless I'm missing something obvious.

  • Problem Recording a Line In

    I am having problems recording line in through macbook in Logic Pro. i am sure i have gone straight through my stereo out into line in on my laptop and and recorded it in logic but for some reason its not working. any ideas check list etc. i know thi

  • How to view satellite image during navigation with google maps iphone 5

    I am a new iPhone convert. I switched from the HTC EVO that used Google Navigation. Google Navigation in Android allows the user to see the image of the map during actual navigation to be the satellite view instead of the standard map view. I downloa

  • Urgent: JAAS authorization policy file

    Hi. I just decided to implement JAAS technology in my 3-tiered application. I did authentication, but can not beleive that the only way to specify authorization is to place all grants in one ore more text files and specify this(ose) file(s) in batch