A DAW for 4 mics

My daughter is using an Apogee Ensemble Thunderbolt with 4 mics and a stereo synthesizer into Garageband. She is recording herself singing and playing a grand piano. She does not like complicating things, but she will go the distance to get an effect. She is a performing artist.
She was told that for her purposes, a Logic Pro purchase would mainly give her many great plug-ins.
The questions:
1. For plug-ins alone, would you prefer Logic's library or at the same price, WAVES gold bundle (current special) - or other plug-ins. Part of this question is wondering if WAVES and other plugins have better sound quality attributes than Logic's and/or better (more intuitive) user interfaces?
2. Perhaps more important than the first question: As a single acoustic recording artist, what functions are in Logic but not Garageband, by which she might benefit? (Latest GB 10.0.3 improves plug-in ability)
3. A consultant told me he loves creating in Logic, but usually edits in Pro Tools.
    What  advantage has PT or REAPER for editing/mixing/finishing over LP?

Hi
Harmz wrote:
1. For plug-ins alone, would you prefer Logic's library or at the same price, WAVES gold bundle (current special) - or other plug-ins. Part of this question is wondering if WAVES and other plugins have better sound quality attributes than Logic's and/or better (more intuitive) user interfaces?
Logic Pro X comes with a boatload of great FX plugins and also Software Instrument plugins. Whilst Waves may be good, you are unlikely to find any package with the equivalent to LPX's plugins, plus sampled content, loops etc for the price
Harmz wrote:
2. Perhaps more important than the first question: As a single acoustic recording artist, what functions are in Logic but not Garageband, by which she might benefit? (Latest GB 10.0.3 improves plug-in ability)
LPX has many, many functions over and above Garageband, but the important thing for you would be that GB and LPX share the same heritage, and work in a similar way so adapting should not be a problem.
see this for all the info
http://www.apple.com/logic-pro/
Harmz wrote:
3. A consultant told me he loves creating in Logic, but usually edits in Pro Tools.
    What  advantage has PT or REAPER for editing/mixing/finishing over LP?
Some would say "workflow", but if you consider cost and time energy learning a second DAW.... you can accomplish most, if not all, that you would need just using Logic.
CCT

Similar Messages

  • Default values for long text for mic in inspection plan

    hi,
    Some long text are coming default when i am creating inpection plan for mic.
    This is coming for only particular plant. For other plant it is not coming. Is there anywhere we can make it as default for a particualar line item . ie for particular characteristics i.e 10, 20 etc
    sathish. R

    Hi,
    I am not sure , whether you are mentioning about Long text for MIC or Default insp char number (10,20,30..) in the insp plan.
    If you are talking about Insp char number in the insp plan . you can specify the same in SPRO , QM->Q planning ->Insp planning -> General -> Maintain profiles for default values.
    Regards
    K.M.Arun

  • Table for MICs

    Hi,
    while creating MICs in QS21 i have a tab called Control Indicator...
    in that i have a check box called Long Term Inspection
    can any one tell me in which table this detail exists for ALL MICs....
    or else atleast tell me the table for MIC details...

    Hello,
    ALL MICs....  are available in this tables.
    Table fields                     Short descriptn                                             
    QAMV                             Characteristic specifications for inspection processing
    QMTB                              Inspection method master record
    QMTT                              Inspection Method Texts
    QPMZ                             Assignment table - insp. methods/master insp. characteristic
    Anil.

  • Dv6-LT069av has a input connector for mic or other input devices, to connect a LP player

    Pavillion dv6 has an input connector for mic or other input devices next to headphones connector on left side, to connect a LP player or other device thru the mic connector, what kind of cable is required? I used an RCA to male cord but no input on the notebook. And how to make it record from that mic input connector? Any settings need to be changed in Win7 to make it work? Thanks in advance.

    Get one of these ...
    http://www.amazon.com/Audiovox-Corporation-CRF907-​RCA-Modulator/dp/B0014KKV7W/ref=dp_cp_ob_e_title_0 
    Connect the RF (Coax) output of the STB to the Coax-in on the modulator
    Connect the Coax-out on the modulator to the TV
    Connect the Video-out and Audio-out RCA jacks on the DVD/VCR to the Video-in and Audio-in on the modulator.
    The STB signal will flow thru the modulator and allow you to watch TV as normal.
    When you turn the DVD/VCR on, the modulator will sense the signal coming from the device and override the signal and inject it onto the coax (converting it to RF first) so that it shows up on the TV instead of the STB output.   When you're done and turn the DVD/VCR off, the signal from the STB will automatically return to the TV.

  • Best DAW for iPad please ????

    Whatst the best DAW for iPad please ????

    Well, this is really not the correct forum for such a question.. as this forum is dedicated to the use of Logic Pro so... you might want to try posting in the iPad/iOS apps forum
    But.....
    Personally I use either Garageband, Auria or Cubasis when I want to do some light work 'on the road....' on my iPad.. and what exactly I wish to achieve.
    This might help and provide more info...
    http://www.musicradar.com/us/news/tech/13-of-the-best-ipad-iphone-ios-daws-and-w orkspaces-574065

  • Recommendations please for MIC to USB adapter for VO recording

    Looking to use a Coles lip mic for vo recordings in fcp. I've tried a cheap XLR to USB cable, hopeless, not enough gain. Consideing the ART USB interface. Anyone have any recommendations?
    Thanks.

    NO adapter...but a good USB mic. The Snowball Mic by Blue Microphones. I do all my Temp VO and Tutorials with it. Good quality.
    Shane

  • Creation of catalog code for mic(qualitative)

    Hi, in qs21, whe i clicked on catalog, nothing codes are appearing. i want to have "yes" and "no" codes for qualitative characeristics. pls advise how to create those codes and assign here in mic?

    Hi,
    QS41 where youy can create Code group.,then their you can define codes
    For qualatitive MIC when you enter t code QS41 select option Catlog--Charectristic attribute ,oress enter
    In next screen click on new entries ,give code gr name ,discription .press enter ,
    Select same code group double click on codes where you can define codes.
    Then go in QS51 It is plant level ,again give plant number ,catlog 1 ,enter.
    press new entry give here selected set name ,discription ,released
    Enter .
    Select same line item double click on selected code where you can select different codes from different code group.
    Regards
    SANIL

  • What do I need for Mic and Guitar?

    I'm new to GB. I have ilife 11.
    I've got a few electric guitars and a condenser mic (phantom power). What do I need to plug them into my Macbook Pro?
    I don't want to spend too much money and am looking for something that works well, sounds good and is hassle free (plug and play) I just want to lay down some demos.
    Something like this? It really does not have great reviews.
    http://www.amazon.com/M-Audio-US44010-Interface-GT-Player-Software/dp/B00061ZM2Y
    What do you guys and girls recommend? A little direction would be much appreciated!

    If you can push your budget up to $249, you'd be doing yourself a HUGE favor. This gives you the ability to pick up the Apogee One. Apogee is a company that's well respected, and makes really good stuff. This has a mic input, guitar input, made for Mac. http://www.sweetwater.com/store/detail/One/
    The M-Audio stuff gets pretty good as you step up into the higher priced models and the firewire ProFire stuff, but it's hard to beat the Apogee One as an entry level interface.
    In my opinion, anything that costs less than $249 (the lower end M-Audio stuff) is simply not very good. If you're going to spend the money, make it worth it.

  • What is the IDOC for MIC in QM module

    Hai all,
       Plz tell idoc for these
    1.Master Inspection Characteristics (MIC) - Create
    2.Master Inspection Characteristics (MIC)- Edit
    3.Master Inspection Characteristics (MIC)- Cancle
    4.Usage Decision and Test Data
    regards,
    Khaja.

    Hi Khaja,
    Check This Idoc <b>qpmk01</b>
    And check these links
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/QMPTBD/ALE_QM.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAGTFADM/CAGTFADM_QM.pdf
    Regards,
    Sridhar

  • Adjusting for mic placement in Garageband

    Hi all,
    I recently recorded a jazz band in a concert hall into Garageband. There were quite a few spot mics on stage, as well as a pair of stereo overheads. What I want to do is move over the overhead's track by the 30 milliseconds or so needed to compensate for sound speed, to make everything line up perfect. I'm not sure there's a way to do this in Garageband, but any help would be appreciated.
    Thanks!

    You have two options.
    1) Use a delay Plugin
    Use a AU delay where you can set the delay in ms.
    2) Move the Region
    I dodn't know of any nudge command for the Region like in Logic but you can do it also "by hand".
    First, sswitch the Time Display to "Time in the Control Bar
    Now when you move a Region, a black Help Tag will display the Position, the Length and the Offset (how much you moved). The trick is to zoom in far enough that you can perform small movements.
    The time is formatted in hours:minutes:seconds;frames:subframes.
    GarageBand is base on 25 fps (SMPTE/EBU) and each frame is divided into 80 subframes.
    If you do the math, then 1frame=40ms and 1SubFrame=0.5ms
    If you want to shift the Region by 30ms, then you should have an offset by "0frame.60subframe"
    Just a tip. Don't get caught up in numbers. At the end let you ears decide if it sounds right. There are other factors as early reflections and frequency response that play a role about the percieved "acoustic image".
    Hope that helps
    Edgar Rothermich
    http://DingDingMusic.com/Manuals/
    'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

  • FIX FOR MIC ISSUE ON X-FI SOUND CA

    Ok, the title is a tad misleading, I'm not sure if this works everywhere, or on all sound cards. I just know after about a week of frustration with my brand new $2200 PC, (equipped with a X-Fi Xtreme Audio, big disappointment wishing I went with a Gamer Xtreme now...) I plugged in my lovely headset and mic for gaming, and much to MORE frustration, no mic support on my "non" supporti've "non flexijack" ports on the front of my case, so I moved to the back and still no dice.
    So far this card has been a compatibility headache, everywhere from having to unplug the forward sound ports, to spending hours in the middle of the night (bad habits with not being able to enjoy tasks unless finished with my PC issues D=) just driving to find the full drivers for the card!
    And still, much like all of you no working mic, ok so now you're shouting for me to get to the point, in my frustration I decided I'd try all the ports on the card to see if that would fix it, and in my fury and climbed behind the PC, headset on volume turned up and mic ready to go (unmuted), tested the pink (PROPER!!!!! Creative -.-) port, to no dice. Moved one jack over, no dice and finally tried the blue sound port on the farthest end of the sound card...
    SUCCESS. I heard myself, my heart literally fell into my loins.
    Who the heck messed that up? But hey, I don't care. A working mic on my Creative Sound Blaster X-Fi Xtreme Audio.
    So HOPEFULLY there's the fix for it. Move your mic to the blue jack on the back of the card and give it a go. Realistically, what do you have to lose?
    Hope I helped!
    `digitaL.braVo

    OK, let's think for a minute that I have a 5. speaker system installed and the microphone connected to the FlexiJack in the X-Fi Xtreme Gamer.
    Let's try now to change the FlexiJack configuration so it accepts the microphone as the input source for recording. Oooops, all options for FlexiJack are greyed out.
    I've tried every single posibility for recording on the sound (recording) control panel and none of them seems to work (I would change then one by one and the try the windows sound recorder to test if it would work). Although when I tried the microphone works perfect on another computer with a 5. Li've Sound Blaster card.
    So, is this an issue with FlexiJack and Xtreme Gamer cards?
    I'm a missing some steps?
    Kind regards.

  • Any Suggestions / Lessons Learnt for  MIC upgrade to ECC6

    Hi all,
    We are currently using MIC Version 1.0  and is in  a different client from the normal R/3 which is 4.6C. We are planning to upgrade to ECC 6 and would like to migrate the inform MIC Version 1.0 to MIC Versin 2.0.  Please let me know of any suggestions / lessons learnt for the MIC upgrade.
    Thanks,
    Balaji

    Hi
    Please follow the below links
    http://help.sap.com/saphelp_47x200/helpdata/en/ed/cf813ec8d3fe3ee10000000a114084/frameset.htm
    http://help.sap.com/saphelp_47x200/helpdata/en/ed/cf813ec8d3fe3ee10000000a114084/frameset.htm
    Regards
    Siva

  • UNABLE TO CREATE DEPENDENT REQUIREMENT FOR MIC - MULTIPLE SPECIFICATION REQ

    Dear Gurus,
    We have to create multiple specification for one MIC --> ECC 6.
    We did the following activities.
    1.Inspection Type 89 --> Multiple Specification is activated in customizing - Default Values.
    2. For the material 1259, Inspection Set up - for the Inspection Type 89 carried out in QM View  of Material Master.
        Multiple spec is activated in Material Master also.
    3. Inspection Plan is created.MIC
    4. I HAVE CREATED THE INSP. PLAN --> GROUP 236 AND COUNTER 1 USING QP01.
    5.I HAVE ASSIGNED THE MIC --> TESTQC  TO THE OPERATION.
    6.In customizing,
        QM --> Quality Planning --> Inspection Planning --> General --> Multiple Specification
        For the OBJECT TYPE 01 --> COUNTRY,
       I HAVE ASSIGNED 4 COUNTRIES --> (1) BAHRAIN (2) DENMARK (3) FRANCE AND (4) GERMANY.
    7.Now I want to create the Multiple specification using the Eng. Work Bench --> EWB.
    8.  Multple Spec. check box activated in EWB.
    9 While creating a dependent requirement for the MIC in EWB, if I assign the object type --> Country   
        and the Object -->  Bahrain, I am getting the error as -->
    =====================================================================
    Assignment of material 000000000000001259;1000; is not available
    Message no. QP306
    ================================================================================================================================================
    I could not proceed.
    HOW TO CREATE THE DEPENDENT REQUIREMENT IN EWB
    Please guide.
    With Best Regards,
    Raghu Sharma

    Dear Gajesh,
    I appreciate for your prompt reply.
    I have activated the multiple specification at client level as a first step.
    Will you please check and confirm?
    Expecting your reply,
    With Best Regards,
    Raghu Sharma

  • LSMW for MIC

    Hi All,
    I want to upload more than 1000 fresh MIC's (Qualitative and Quantitative) both in a fresh client. I made some LSMW without formula for practice purpose. But in real i want to upload with formula's so my doubt is where and how to maintain this formula..? please suggest some methods with an example
    Regards,
    Santosh

    Hi Santosh, formulas are maintained in inspection plan and not at MIC creation. You can use LSMW by recording method for uploading MICs.  But to use them in task list it is better if you can develop a BDC. You have to do lots of excel work for precise relations of formula prior to upload it. Try to create manual plan using QP01 with MIC having calculated characteristics ticked. You will get some insights of it.
    Regards,
    Anand

  • NO PLAYBACK AUDIO CONTROL FOR MIC IN REALTEK HD AUDIO MANAGER.

    I have a l355d-s7825 laptop that I can not get my mic to playback through the speakers. I have attached two screen shots that show my computer is missing the volume slider and playback option under mic. I have the latest driver installed with no help. I would appreciate if anyone can shed some light on this issue. Thank you. Oops couldnt get the pics in the attachments....if you google Realtek HD Audio Manager under images you will find the pics im talking about.

    Satellite L355D-S7825
    This image, Kevin?
    I have the latest driver installed...
    Sometimes those get corrupted. Did you reinstall?
       Realtek Audio Driver for Windows Vista (32/64bit)
    Did you try the Realtek control panel instead of the Windows one?
    -Jerry

Maybe you are looking for

  • How to create the web template

    Hi BW Experts,    how to create the web template.....!    I just want to know what is the use of Web template. i want to display the report in WEB-UI screen ( sap-crm 7.0 portal ) can any one help me please how to proceed ...! Thanks shahina..!

  • How to make an indicator takes more than one input

    Hello, I want to know how to make an indicator ( like gauge for example) response to more than one case strrcuture result. In other words, how the indicator can take more than one input and move based on different input values ( the arrow of the gaug

  • Cant install any version of itunes on windows vista, does anybody know of a fix?

    cant install any version of itunes on windows vista, does anybody know of a fix?

  • Currency in standard SAP Reports

    Hi Experts, Where can I find the currency translation settings for standard SAP reports (From Database currency to List Currency)? While I am executing one of the reports, I am finding that the system is translating the currency and displaying the ou

  • Incompatible version - this server:6.0.0b2 client:5.1.0]]

    Hi, i have a client running on WLS 5.1, and i have to connect to a server running on WLS 6.0 I got back following error: javax.naming.CommunicationException [Root exception is                                    weblogic.socket.Unrecover ableConnectEx