A dead mouse? Or a curse on the curser?

Very strange...All at once, the mouse stopped pointing. I can move it around blindly, but the pointer, (the business end)has vanished....Obviously Final Cut Pro is impossible to use without a pointer. Key board shortcuts won't even let you save & quit, that I can see...Is this a common dead mouse problem? It moves but it won't point.
G5 Mac OS X (10.0.x)

Seeing as this is not specific to FCP, you may find a faster response by posting this question in the OS X general discussion thread. It's here if you are in fact running 10.0.x.
Though I'd suggest the default advice of repairing permissions with Disk Utility whenever something funky like that happens. (You can repair permissions in 10.0, right? It's been so long since I've seen it.)
Dual 2.5 G5 Mac OS X (10.4.3) 4 GB RAM, DeckLink HD Pro, XRAID

Similar Messages

Dead mouse

hey all, suspend to ram works and resumes fine but for one thing... the mouse is frozen on resume and nothing i've tried so far works. unloading the psmouse module prior to suspend and then loaded on resume still has the same outcome... a dead mouse!
can anybody point me in a direction that may be helpful. i'm a bit unfamiliar with arch so a nudge in the right direction would be appreciated.
happy sunday :-)
otj

You're not alone. The problem is in X, probably, because moving mouse causes writes to /dev/input/mouse<n>, that can be checked with $ od /dev/input/mouse<n>
http://www.linuxquestions.org/questions … -x-518369/
I've catched the same issue recently and I had to terminate X session to make my mouse working again.

Using a mac OSX and a logitech M-UAG120 mouse, how do I use the wheel button to open a link in a new tab (but not switch to it)? Can't type a key in box.

In the logitech control center I've clicked on my mouse (tilt wheel mouse), clicked on 'wheel button', and in the dropdown menu selected keystroke. Under 'configure keystroke', there's a "type a key..." box, and to the right, there's a "choose any modifier" selection.
On this web page, http://www.accessfirefox.org/Firefox_Keyboard_and_Mouse_Shortcuts.html, the instruction for 'open link in new tab' is Cmd+Return Cmd+Click
On this page, https://support.mozilla.org/en-US/kb/mouse-shortcuts-perform-common-tasks, the instruction for 'open link in new tab' is command+Left-click link Middle-click link
I cannot figure out how to type these in correctly to make the function work.
Help please?
Thank you all.

I do not know what the standard setting is. In my Mac system preferences, when I access the Logitech Control Center, I click on "wheel button" (button 3), and get a drop down menu with the following choices:
Nothing 
Click 
Advanced Click 
Cruise 
Horizontal Scroll 
Keystroke 
Modifiers 
Open Application 
Open Document 
Open Folder 
Open Web Page 
Back 
Forward 
Cover Flow 
Display Control 
Eject CD 
End Session 
Expose' Dashboard & Spaces 
One-Touch Search 
Quick Look 
Screen Capture 
Sound Control 
Switch Application 
Zoom
I'm lost here. The mouse used to do it, then I needed to unplug it, and when I set it up again, the wheel button is inert when used on a link.

I used to open many tabs in the same page and i move from one to other by mouse but since3 two days the tabs open in the same page normaly but i can't move from one to other when i clik with mouse on any tab it don't open/ do u have any solve for this?

i used to open many tabs in the same page and i move from one to other by mouse but since3 two days the tabs open in the same page normaly but i can't move from one to other when i clik with mouse on any tab it don't open/ do u have any solve for this

Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

My macbook pro is running very slow with some strange mouse and window movements. The trackpad is very unresponsive and when responding the cursor moves on its own and/or very erratically. When on safari the window suddenly zooms in or highlights words.

My macbook pro is running very slow with some strange mouse and window movements. The trackpad is very unresponsive and when responding the cursor moves on its own and/or very erratically. When on safari the window suddenly zooms in or highlights words and looks them up via dictionary. I currently have a wireless mouse connected and I am still having the same problems.
I fee like I may have a virus or my laptop is perhaps being accessed remotely. All of the sharing options are unchecked.
HELP PLEASE
Very worried!!

Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
     after the chime press and hold down the OPTION key until the boot manager screen appears.
     Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
     Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).

I saved photos from my Macbook Pro onto my Iphone (using itunes, 4 years ago). My macbook is now dead and I need to get the photos I saved off of my iphone 3GS transferred to a pc. Any help... From my PC I can only access "internal storage"

I saved photos from my Macbook Pro onto my Iphone (using itunes, 4 years ago). My macbook is now dead and I need to get the photos I saved off of my iphone 3GS transferred to a pc. Any help... From my PC I can only access "internal storage"

The iphone is not a storage/backup device. The picture sycn is one way - computer to iphone. The photos are also reduced in size when synced to iphone so they are not of the original quality
It has always been very basic to always maintain a backup of your computer.
Have you failed to do this?
If so, not good at all, you can e-mail the pics to yourself - keep in mind they will never be of the original quality

Hello Simple problem - don,t know how to solve it. With Premiere CC when I try to do a selection (click... drag... release the click) very often it stop way before the end of the move I'm swinging the Magic Mouse. I taught that the mouse clicking was de

Hello
Simple problem - don,t know how to solve it.
With Premiere CC when I try to do a selection (click... drag... release the click) very often it stop way before the end of the move I'm swinging the Magic Mouse. I taught that the mouse clicking was defective and went to get a new Magic Mouse after lots of frustration. Today, I have an edit to do it it does the SAME thing !!
I was like ????#$%?&*(???
Opened all the lights and taught I've trow the new mouse to the garbage and was using the defective mouse again... no !! - ??
Actually, the bran new mouse is doing the same thing. What I understand after investigating on the motion and watching carefully my fingers !! - is that when I click I have to keep my finger at the EXACT same place on the mouse... drag and release and it's fine. If I click by pushing on the mouse and my finder is moving of a 1/32th of a millimeter, it will release and my selection will be to redo. You can understand my frustration ! - 75$ later... same problem, but I know that if I click with about 5 pounds of pressure and trying to pass my finger through the plastic of the mouse, it you stay steady and make it !
The problem is that scrolling is enable while clicking and it bugs.
How to disable it ??
Simple question - can't find the answer !

Helllooo !?
sorry but the Magic Mouse is just useless with the new Adobe Premiere CC and since I'm not the only one but can't find answer this is really disappointing. This mouse is just fantastic and now I have to swap from a USB mouse to the Magic Mouse every times I do some editing. My USB mouse if hurting my hand somehow and I want to got back to the Magic Mouse asap. Please - for sure there is a simple solution !
Thanks !!

Is it dead? will only boot off the OS disc or in safe mode.

Hi there!
Is it dead? will only boot off the OS disc or in safe mode.
My MBP (March 09) running 10.6 Snow Leopard is playing up.
After a frustrating day of troubleshooting, I don't know what else to do.
So far:
Duplicate accounts deleted.
Permissions repaired and verified
Renistalled the OS from disc
Haven't been able to log in to OS since,
- can only boot in safe mode or OS istall disc to use Utility
Disk Utility used in safe mode, disk utility > verify disk, said to repair it from disc boot
Disk repaired
Still won't reboot out of safe mode - it gets past the blue screen to the desktop wallpaper screen, but the dock or items on my desktop won't appear, colour dial spins, i think the longest i've given it is 20 minutes
Still won't boot other than in safe mode (currently using it right now)
Did the whole /sbin/fsck -fy,
Invalid file count (Is 484158 instead of 484160)
Invalid volume directory count (is 157609 instead of 157807)
Repairs successful
Ran fsck again, and HD OK message
Ran exit and it won't boot, only in safe mode again, and to the spinning wheel on the desktop wallpaper screen.
Is my HD cactus?
Is this something that can be replaced?
If not, what next?
I'm a little apprehensive about sending it out to get fixed (it's out of three year warrnaty) and I'm not sure how much more they can do/check than I've already done and come to the same conclusion.
Any help, much appreciated and thank you in advance
Bree.

Are you referring to the new bluetooth (wireless) keyboard or are you using a wired version?
Message was edited by: Barbara Daniels1

I refurbished my macbook air 7 months ago because there was a problem with the steady state drive. Now my battery seems to be dead again. How long does the warranty last? Do I need to pay for a new battery?

I refurbished my macbook air 7 months ago because there was a problem with the steady state drive. Now my battery seems to be dead again. How long does the warranty last? Do I need to pay for a new battery?

As I wrote Apple will diagnose an Apple product even if it is out of warranty for free. That should be your first step to find out if the problem is the battery or something else.
Once you have Apple telling you a 7 month old battery is defective (if that turns out to be the case) then it becomes a game of horse trading. You'll need to speak to the tech and when he tells you there is nothing he can do you will need to speak to the tech manager and when she says most likely there is nothing they can do you go to the store manager, etc. It is unlikely (though possible) that they will give in easily you need to be firm, polite and let on that you're willing to accept a partial reimbursement.
So again the first step is to find out what is wrong.
good luck

I have not synced my iphone to my new computer. My old computer is dead. How do I keep the music on my iphone from disappearing and get synced to the new computer?

I have not synced my iphone to my new computer. My old computer is dead. How do I keep the music from disappearing and get synced to the new computer?

This will cost you http://www.wideanglesoftware.com/touchcopy/index.php
or see this doc http://discussions.apple.com/docs/DOC-3141

Is there ANY wireless mouse that will work with the iPad 2 and Apple's Wireless Keyboard?

I have the iPad 2 and Apple's Wireless Keyboard and would like to purchase a wireless mouse that will accommodate my Apple products. I do understand that Apple's Magic Mouse is not compatible with the iPad 2, but would like to hear if there is any possibility that i could use a wireless mouse with my iPad.
Thanks :)

You don't have to purchase a mouse. You already have one, it's wireless and the only one that will work on an iPad.
 Cheers, Tom

Mouse over a menu on the portal

hello
We are using Portal Nw2004s SPS14.
I would like to know if it possible that, when you put the mouse over a menu on the portal, a label appears with a long text.
I mean, If it is possible, in the standard.
Thanks and Regards
Noemi

Hi,
You are looking for some thing like tooltip, which is not possible in standard.
Tooltip in detailed navigation
Regards,
Praveen Gudapati

VMware Player and mouse not behaving correctly with the vmmouse driver

I'm running Arch on VMware Player and having problems with the mouse behavior.
- Arch is updated, 32 -bit
- VMware Player 6.0.1
- Host is Windows 8.1 64-bit
- XFCE 4.10
If I install xf86-input-vmmouse, the following happens:
- If cursor touches the edge of the screen when scrolling a window with the scroll bar, scrolling stops. If I continue pressing the mouse button and moving the mouse (and not touching any edges), the scrolling starts working again after two seconds.
- When opening any new window, hovering and clicking will register only after two seconds. This is very noticeable when opening the application menu and trying to launch any app - first click never works.
Uninstalling the vmmouse driver fixes the above problems. The mouse "feeling" gets very bad though, it seems jumpy and the acceleration is crazy and can't be tweaked to be satisfactory with the mouse settings. With vmmouse the mouse feels otherwise just fine.
Installing or uninstalling Open-VM-Tools doesn't do anything.
I tried this, but it had no effect: https://wiki.archlinux.org/index.php/In … s_expected
Happens both in fullscreen and windowed, scrolling behavior happens every time, hover/click lag is not so predictable (seems to happen 50 % of the time).
Might there be any easy fix for this?

Hi Sung, Thanks for your reply.
Leonardo:
If I understand your msg correctly, I'm wondering if
the data model as you described is complete.
You state that you have MaintenanceType, Maintenance,
and MaintenanceOrder, but don't you need
MaintenanceOrderLine?MaintenanceOrderLine is what I'm calling Maintenance. A Maintenace record is used just to link a MaintenanceOrder to a MaintenanceType
>
Otherwise, you say that you removed all Maintenance's
in step 2). How did you form a list of all
Maintenance's in step 4)? How do you form this
list?
was raised due to unique constraint violationAt step 3) I'm using a view object, MaintenanceTypeView, to create a list of checkboxes, one for each MaintenanceType.
At step 4), for each MaintenanceType selected in the form, I'm creating a new Maintenance using:
//All codes of maintenance types, that already have a
//respective maintenance record in the db, have already
//been remove from the maintenancesToInsert list at this
//point
for (Iterator iter = maintenancesToInsert.iterator(); iter.hasNext();) {
MaintenanceViewRow maintenanceRow = (MaintenanceViewRow) maintenanceView.createRow();
maintenanceRow.setMaintenanceTypeCode(Integer.valueOf((String)iter.next()));
maintenanceView.insertRow(maintenanceRow);
>
Sung

My iphone4 will turn off at 47% battery and when i attempt to turn it back on it says dead, until it is placed in the charger and it says 47% again, what does this mean and how can i fix it?

Hey I just got an iphone 4 and everytime it gets to around 47% battery it dies, when I try to turn it on it says the battery is dead, when i place it in the charger it says 47% then continues to charge, could this be over heating or a bug? What is it and how do I fix it?

Hopefully one of these steps should solve the problem.
1. System Preference > Sound > Output > Internal Speakers
    Highlight Internal Speakers
    Make sure that Mute is not enabled.
2. Remove the headphone.
    If you see red light in the headphone port, plug the headphone
    in and out of the port 5 or 6 times to flip the microswitch inside.
    Sound output may be stuck in the digital mode.
3. Reset PRAM. http://support.apple.com/kb/PH4405
4. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
5. Applications > Utilities > Audio MIDI Setup
    Audio Devices window
    Side Bar
    Click the Built-in Output.
    Under Mute any of the boxes checked? If so, uncheck it.
6. System Preferences > Sound> Sound Effects
    Play sound effects through:
   Select "Internal speakers" and then back to "Selected sound output device".

MY MAC PRO MOUSE POINTER JUMPS FREELY AROUND THE SCREEN AND MAKES IT IMPOSSIBLE TO NAVIGATE PROGRAMS... ANY IDEAS

My mac Pro mouse pointer jumps freely around the screen, making it dificult to navigate... it also moves the screen around without touching anything... any ideas whats wrong?

Check this forum link for some good suggestions:
https://discussions.apple.com/thread/4650109?tstart=0
Post if you have any questions!

A dead mouse? Or a curse on the curser?

Similar Messages

Maybe you are looking for