A different error msg

Was using BB App World and received the following error msg: Problem readimg data frpm server and App World must exit. Error type: 100002 Has anyone else seen this? Know what it is/ why I received it? Thxs!
••€KTZmom_csr€¤
Solved!
Go to Solution.

Hmmm...could be a multitude of reasons...suggestions:
1) Hard reboot of your BB -- With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation
2) Make sure you have the most recent version of App World (there was a recent update). Find that here:
http://na.blackberry.com/eng/services/appworld/download.jsp#tab_tab_download
As for why...well, it's a computer and subject to random events.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • Error msg 13019 please help

    hi
    i need help in getting rid of this error msg 13019. it started after downloaded a couple of songs. and it will not allow me to sync my nano ipod thanks

    Ive fixed this issue before. The steps are kinda long but they work.
    This is for windows computers with iPod nano that get the error 13019 during or after a sync with iTunes.
    -Open itunes
    --click, edit, click preferences
    --select advanced
    ---make a note of the iTunes media folder location on a notepad.
    ---put a check in organize files
    ---take the check out of copy files
    ---click ok
    --Click file, at the top of iTunes
    --move mouse over library, select organize, and consolidate files. ( This ensures all music in you iTunes will be in the iTunes media folder later.)
    At this point, if you have playlists you want to save:
    -Create a folder on your desktop, call it, playlists
    --Hover you mouse over your playlist in iTunes, should be at the bottom of the blue/grey column on the left.
    --right click the playlist, select export playlist
    --Navigate to your desktop and open the playlist folder and save.
    ---Do this for each playlist you want to save
    -Close itunes
    -Click your start button, and open computer or my computer
    --Using what you wrote down on your note pad, follow the path to the "iTunes folder", NOT the iTunes media folder
    --Open the iTunes folder.
    --Stop here
    -You will see icons that look like folders and you will see icons that look like files-
    -You will KEEP the FOLDERS
    -You will DELETE the FILES
    --If it makes you more comfortable you can cut the files out and paste on your desktop, but as of now we do not need the files any longer as we have the playlists backed up. Remember-Keep the folders.
    --That was the magic--
    -Disconnect your iPod if connected.
    -When you open your iTunes, it will be empty, that is OK. We are recreating the library. Everything will come back in a few seconds.
    -Click file at the top
    --Select, add FOLDER to library, not to be confused with add file.
    --In the window that pops up, locate and click on computer or my computer
    --From here follow the path to the iTunes media folder on your note pad, but do not open the iTunes media folder.
    --Click the iTunes music/media folder one time so it highlights.
    --On the bottom right you will have option to select folder, or choose folder or OK. Hit that button.
    All you music will start to import back into iTunes.
    -Plug in iPod after completed
    --a message pops up about being synced with a different library.
    --Click erase and sync
    --Watch all your songs go on your iPod with no error message.
    From here you may sync your iPod the way you want with out worrying about the persnickety error 13019!!!!!
    Hope this helps!!!
    Julian
    p.s. Follow the directions exactly.
    p.s.s. To add your playlists back to iTunes:
    -Click file at the top of the screen
    --move your mouse over library, selecte import playlist
    --on the new screen that pops up, navigate to your desktop
    --open the playlist folder, select the first playlist, hit ok
    --repeat for each playlist exported

  • When I reboot my PC I get error msg: "procedure entry point  SQlite3_wal-checkpoint could not be found..."

    I had to uninstall prior version of iTunes to install IOS5 in my iPhone 4 (relatively new phone, only about 5 weeks old).  It took several attempts to install IOS 5, and I finally succeeded only after disableing Kaspersky AV and the Windows Firewall.  This, even though the iTunes connection diagnostics reported everything was OK, no errors and all green indicators.  I had opened iTunes as Administrator too.  So, now I have IOS 5 installed and running ok on the iPhone4, but I have a new problem on my PC that arose from all the different attempts to get this done.  Here's more detail on the procedures and system changes I had made on my PC, and then what I get for the error msg.
    1) As Instructed by an Apple rep, I UNINTSTALLED both iTunes and Quicktime.  I then rebooted and ran iTunes in Admin mode, used the Connection diagnosis (reported all OK) and then tried to install IOS 5 on my iPhone4.  The download (which would take between 30-45 minutes on each attempt) would fully complete and then I'd get an error msg of "server timeout".  This led to further advice from Apple telling me to try the download again, this time with AV and Firewall disabled.  So I rebooted again, disabled AV and Firewall and the IOS5 succeeded.
    2) However, ever since I had removed both iTunes and Quicktime and reinstalled (only) iTunes (so far), each time I reboot my pc I get the following:
    A Window opens with title: "Apple Sync Notifier exec Entry Point Not Found".  Within the box below the title the following error msg appears: "The procedure entry point SQlite3_wal_checkpoint could not be located in the dynamic link library: SQlite3.dll"
    I performed a search for SQlite3 in My Computer.  It indeed shows up in a number of places, including within an Apple folder.
    I'm using 64bit Win7 Home Premium SP1 on a PC with AMD Phenom II X4 945 Processor, 3 GHz with 8.00 GB RAM.
    All iPhone and other applications seem to be behaving normally.  I just have to hit "OK" to get rid of that annoying (new) error message that is apparently coming about during the PC startup process.  It does NOT recur if I put the system in sleep mode, enter and exit iTunes, etc.  It only occurs on reboot.

    I have searched my computer for that file SQlite3.dll and also file QTCF.dll and I cannot find either one when I search my whole computer for it.  I cannot fix this!  I deleted Itunes and every time I try to download it, it goes through all this download till the end when it says that iTunes.exe-entry point now found and that Procedure entry point message comes up.  HELP!  This is driving me crazy.  How can I get itunes to work again when I can't find the danged .dll file to remove, move or rename!?!?!??

  • 2 items: 1) importing cvs columns do not match t-bird columns 2) error msg when trying to add 2nd email account

    Hi and thanks in advance for lending a hand.
    Issue #1
    Followed instructions at https://www.youtube.com/watch?v=8Df8mRL3TBs to import cvs to t-bird – but
    My cvs headings are not name, email m chat name, org, additional email etc etc
    Why are my columns names not showing up?
    +++++++++++++++++++++++++++++++++++
    Issues #2
    Adding second email address in thunder bird
    email address #1 works fine - but trying to add 2nd one – having error msgs poop up.
    1st error msg is:
    [Exception... "Component returned failure code: 0x80004005 (NS_ERROR_FAILURE) [nsIMsgIncomingServer.verifyLogon]" nsresult: "0x80004005 (NS_ERROR_FAILURE)" location: "JS frame :: chrome://messenger/content/accountcreation/verifyConfig.js :: verifyLogon :: line 98" data: no]
    Pressing “done" again yields different error reply: Incoming server already exists.
    [end of error msgs]
    Have tried box1121.bluehost.com as well as mail.bikempowered.com for server hostnames - various ports and SSL’s
    The Tech at blue host claimed there this was a bug known to thunderbird – and that a solution is known to be needed.
    Seeking solutions - also I’m 90% Luddite - so please if at all possible, but things in “for Dummies” mode
    With gratitude and hope,
    Brian

    About .csv check your .csv-file as a text file.
    Is the first line your column-names separated with a "," ?
    It should be. When you import, mark that 1st line has column-names
    Then move Tbird's names around until they correspond with yours. Your names will not be imported.

  • Application cannot proceed. Internal error occured. Contact your administrator. Error msg: Unable to connect to the database. Please make sure the database information specified in admin/includes/config.php are correct.

    After clicking in email link, I get the following message on Firefox page : " The application cannot proceed!
    An internal error occured. Please contact your administrator and describe the steps you took before you encounter this error message.Error msg: Unable to connect to the database. Please make sure the database information specified in admin/includes/config.php are correct."
    The email asked to install the latest Adobe Flashplayer version to have it working. I installed it, also updated my plug-ins and checked in safe mode that the extensions were not the problem. I also deleted the cookies an cache. Nothing seems to be working so far. I have the lastest version of Firefox 8.0.1 as well as Roboform 7. I noticed that the latest Firefox version has (x86) tagged to it. Does it refers to an 86 bits because my computer uses 32 or 64 bits only. I tried also different browsers and the message kept appearing. How do I resolve this problem?

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    * Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    * Tools > Options > Privacy > Cookies: "Show Cookies"

  • What to do about error msg: Warning: SUID file "System/Library/Core/Services/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDA gent"has been modified and will not be repaired" on MacBook Air.

    What to do about error msg in Disk Utility on MacBook Air:
    Warning: SUID file “System/Library/Core/Services/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDA gent"has been modified and will not be repaired.”

    As long as the report ends up with 'Permissions repair complete' then, as far as permissions go, you are fine. You can ignore the various statements in the report:
    Permissions you can ignore on 10.5 onwards:
    http://support.apple.com/kb/TS1448
    Using 'should be -rw-r--r-- , they are lrw-r--r--' as an example, you will see the that the permissions are not changed, but the | indicates a different location. This is because an update to Leopard onwards changed the location of a number of system components.
    Poster rccharles has provided this description of what it all means:
    drwxrwxrwx
    d = directory
    r = read
    w = write
    x = executeable program
    drwxrwxrwx
    |  |  |
    |  |   all other users not in first two types
    |  | 
    |  group
    | 
    owner

  • Performance issue: Calling a BAPI PO create in test mode to get error msgs

    Hi,
    We have an ALV report in which we display purchase orders that got created in SAP, but either got blocked due to not meeting PO Release strategy tolerances or have failed output messages. we are displaying the failed messages even.
    We are looping the internal table of eban(PR) & calling bapi po create in test mode to get failed messages.
    Now we are facing performance issue in production. What can be the alternate efficient way to get the error msgs with efficiency
    Regards,
    Ayub H.
    Moderator message: duplicate post (different ID, same company...), see below:
    Performance issue calling bapi po create in test mode to get error messages
    Edited by: Thomas Zloch on Mar 9, 2012

    Hi Suvarna,
    so you need to reduce the number of PO-simulations.
    - Likely you checked already, that all EBAN-entries should already be converted into POs. If there would be a large number of "new" EBAN-entries, they don't need to be simulated.
    - If it's a temporary problem: give aid to correct the problems (maintain prices or whatever the error-reasons are) Then the amount of not-converted purchase requisitions (PR) should drop, too
    - If it's likely, that your volume of open PR will stay high: create a Z-Table with key of EBAN and a counter, simulate (once a day) PO conversions and store the results in the Z-table. In your report you can use the results... if they are "new enough". From time to time new simulations should be done, missing master data might be available.
    Maybe users should be allowed to start this 2nd report manually (in background), too -> then they can update the messages after some data corrections themself, without waiting for the result (just check later in online report and do something different in between).
    And you might need to explain, PO simulation takes as long as PO creation... there is no easy or fast way around this.
    Best regards,
    Christian

  • Error msg on WLC

    I am trying to place my LAP on a different subnet as of my WLC, this is the error msg i got
    Received LWAPP DISCOVERY REQUEST from AP 00:0b:85:64:cc:90 to ff:ff:ff:ff:ff:ff on port '4'
    Received a Discovery-Request on an unsupported VLAN 18
    Did i miss anything on my WLC configuration

    Make sure the VLAN 18 is allowed on the trunk port between WLC and the switch and that the VLAN is present in the database of the switch.

  • Get error msg when opening iphoto from Photoshop: "Open iphoto 5 or later..

    I get an error msg when trying to open a photo in iPhoto from Photoshop: "Open iPhoto 5 or later to see photos from your iPhoto Library in this list." ... but in info it says I have iPhoto '08.... I am confused.... what is iPhoto 5, and how is it different than iPhoto '08? I have not had this issue before today.... previously it was working fine.
    Please email me when answered as it took me a while to find this forum and I'm afraid I won't be able to find it again.
    Thanks,
    <edited by host>

    Using Photoshop (or Photoshop Elements) as Your Editor of Choice in iPhoto.
    1 - select Photoshop as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
    2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
    3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
    This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
    NOTE: With Photoshop Elements 6 the Saving File preferences should be configured: "On First Save: Save Over Current File". Also I suggest the Maximize PSD File Compatabilty be set to Always.
    If you want to use both iPhoto's editing mode and PS without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in main window". That will let you either edit in iPhoto (double click on the thumbnail) or in PS (Control-click on the thumbnail and seledt "Edit in external editor" in the Contextual menu). This way you get the best of both worlds
    2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
    3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
    This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    NOTE: The new rebuild option in iPhoto 09 (v. 8.0.2), Rebuild the iPhoto Library Database from automatic backup" makes this tip obsolete.

  • I cant register for eprint - error msg says: ajax submit failed: error = 403, forbidden

    i cant register for eprint - error msg says: ajax submit failed: error = 403, forbidden
    Suggestions?
    Thanks -

    I just viewed the website on my computer, and it appears to be working okay on my end. It's possible that there's a setting in your web browser responsible for what you're seeing. I would recommend trying the following steps:
    1. Try to view the site in a different web browser to see if that's the issue. Normally, Internet Explorer, Google Chrome, Firefox, and Safari all display the website properly. Try one or two of those (other than the one you've been using) and it should do the trick.
    2. If that doesn't work, try resetting Internet Explorer's default settings by clicking "Tools" (on the top menu bar), "Internet Options" (usually at the bottom of that list), "Advanced" (far-right tab), and "Reset" (towards the bottom-right of that box). After resetting the defaults, try viewing the ePrint Settings area again.
    If I have SOLVED your issue, please feel free to provide KUDOS and make sure you mark this thread as SOLUTION PROVIDED!
    Although I work for HP, my posts and replies are my own opinion and not those of HP.

  • Xcelsius Engage 2008 - Error msg during install

    Would someone please help!  I am trying to install Xcelsius Engage 2008 and recieve the following error msg's:
    1. Office XP application: Excel, Word, Outlook or PowerPoint must be pre-installed.  Higher versions work fine.  (Clicked "OK")
    2. Installation ended prematurely because of an error. (Clicked "OK")
    My OS is XP Professional, and am running Office XP on my machine. Why is this occurring?

    javier,
    I have tried this on 2 machines - one with Office 2003 and Office 2007. The install aborts on office 2003 (I uninstalled and reinstalled office 2003). I tried two different downloads of xcelsius 2008 (we have license for xcelsius 2008 enterprise) - one from this forum and other from service marketplace software downloads area for BOBJ. Same error.
    Documentation says office 2003 and 2007 are supported. Frustrating -- the sap notes search does not even recognize excelsius key word (now that knowledge base is gone) - asks me if i misspelled..
    any other clues?
    Thanks

  • Error msg on pc

    i use auto mouse it run very smooth more than chrome but after 20minute firefox shutdown its program
    and the error msg appear
    how to fix it?

    Did you get the Mozilla Crash Reporter?
    When Firefox crashes, it usually records information about what was happening at that moment. Using the Mozilla Crash Reporter, you can submit that data to Mozilla and share it with forum volunteers to see whether it points to the solution. Please check the support article "[[Firefox Crashes]]" (especially the last section) for steps to get those crash IDs, and then post some of the recent ones here.
    If you are getting a different error message, such as Windows reporting that a program has stopped responding or a blue screen, please provide as much information as you can about the details.

  • OBIEE   to Teradata connectivity - Linux OS - getting "Not enough information to log on." error msg.

    Hi,
    I am trying to establish  connectivity between OBIEE 11g to Teradata DB 13.10.6.1.    obiee running on Linux OS  64bit.    i installed  Teradata  odbc drivers  13.10.0.10  ..   when i try to  access data from obiee online i am getting error msg  "Not enough information to log on." error
    Per the documentation  i configured  odbc.ini  and user.sh  .  (ld_library_path)..   ODBCini  parameter  also set.
    The teradata  connection working ok when i ran a sample  program  ..   /opt/teradta/client/13.10/odbc_64/samples/C++..   exceuted ./adhoc  and  i am able to connect using  same  datasource name/credentials that listed in odbc.ini.   
    any thing i am missing  in  Teradata config side?..   or  obiee  config side.. and  troubleshooting/trace advice?... Thanks for your help
    Kash

    http://www.symantec.com/security_response/writeup.jsp?docid=2010-011922-0125-99& tabid=2
    The story goes on. I am sharing this with other users for information only based on my experience with the product. I've owned a MAC since they were first introduced in 1984 and have used Norton for years. If the virus Bloodhound was real, and not just a false heuristic positive (which is totally possible) it came in on the heels of my downloading a free PDF OCR X (before reinstalling the updated version of Norton for 10.8.3) and using it to convert .jpgs > PDF OCR X text >MS Word > Adobe .pdf as that virus (Bloodhound.PDF.20 is known for exploiting weaknesses in Acrobat and Adobe .pdfs). I have never been happy having to use the MS Office suite of office products for MAC, but EXCEL on a PC is only compatibile with EXCEL on a MAC.
    When I got the Bloodhound warning after running a quick scan, I ran a full scan (1,050,660 files) with the same result. I looked at my terminal - nothing happening. I called Norton, who in turn convinced me to purchase an $89.98 subscription + $19.95/month for their spyware and virus removal service (the same sales pitch I've heard from other security providers who sell services through panic). The tech, who said it was probably false, played around with my computer via remote login, and then signed off, saying everything was okay. I reran a full scan and there was the virus again. Called tech support again. Finally got the virus quarantined and tossed it. The reality is that there was a 50/50 chance that it was something because of the way MS Word was behaving when I tried to save the file created from the ocr'd jpgs (error message: disk full- when I have 250GB of free disk space). I had to resave the files with a different name and place them in alternating folders. That havoc is now gone, but I will not be keeping the subscription. Just FYI.

  • Error msg = pls. install/uninstall the product using setup.exe in the root folder

    unable to install photoshop elements v10 on a windows 7, ultimate 64bit computer, get:
    error msg = pls. install/uninstall the product using setup.exe in the root folder

    yes, I am installing as the administrator.  I have tried to install from
    two different folders;
    1. c://adobe photoshop elements 10.msi
    and
    2. c://program files/adobe/adobe photoshop elements 10.msi
    get the same error message from both locations.
    the error message is not specific as to "root folder"
    someone please help with this.  I would like to be able to install this app.

  • Its not at all startning and not giving any kind of error msg, and i restared pc many times and uninstall and installed many times, but still its not opening

    .its not at all startning and not giving any kind of error msg, and i restared pc many times and uninstall and installed many times, but still its not opening

    Also, if you downloaded earlier in the week, make sure you have the 37.0.1 updated that was released on Friday (I think).
    If needed, I suggest installing a slightly different way the next time:
    '''Clean Reinstall'''
    We use this name, but it's not about removing your settings, it's about making sure the program files are clean. As described below, this process does not disturb your existing settings. Do NOT uninstall Firefox, that's not needed.
    (1) Download a fresh installer for Firefox 37.0.1 from https://www.mozilla.org/firefox/all/ to a convenient location. (Scroll down to your preferred language.)
    (2) Exit out of Firefox (if applicable).
    (3) Rename the program folder
    ''(64-bit Windows folder names)''
    C:\Program Files (x86)\Mozilla Firefox
    to
    C:\Program Files (x86)\OldFirefox
    ''(32-bit Windows folder names)''
    C:\Program Files\Mozilla Firefox
    to
    C:\Program Files\OldFirefox
    (4) Run the installer you downloaded in #1. It should automatically connect to your existing settings.
    Any difference?
    Note: Some plugins may exist only in that OldFirefox folder. If something essential is missing, look in these folders:
    * \OldFirefox\Plugins
    * \OldFirefox\browser\plugins

Maybe you are looking for