A/ex will not function when connected to a Netgear 3G router.

For several years my A/EX units operated in Airplay and print server mode (pre OS X Lion).  That configuration used a Netgear DG834 router serving IP addresses (i.e. acting as a DHCP server) to the WLAN.  I then changed to using 3G internet (3 UK) and a Netgear MBR 624GU router again providing DHCP services to the WLAN. 
Now the A/EX units don't work...  I can configure them to connect to the WLAN and Airport utility "sees" them when they are connected by ethernet but once in wireless mode the connectivity seems to be lost (though the green lights stay on).
Both A/EX units get very hot when in use and I'm erring towards hardware failure but 2 to lose 2 units at the same time seems less than likely.
Any thoughts and suggestions greatly appreciated.

I also had a power problem .
I had two cords ... both looked perfectly OK ...no kinks or tears.  Spent a lot of time looking through the manual and software issues.
When I replaced the CORD I was using  with another Cord ... it worked perfectly.  Try another cord or charger or both ... before you try anything else. 
We get so involved in the software and hardware that we don't think "simple".
Check if the cord  or wiring to whatever we are using  is Plugged in, the outlet is live (no fuse blown), the secondary device is working and the cord is "live".

Similar Messages

  • I have a folder with 10 folders inside it, 8 of the folders will not function when I use "show view options".

    I have a Folder with 10 Folders inside it, 8 of the Folders will not function when I use "show view options", they always default back the default.  The "show view options" works on all my other Folders in my system, even on the first two of the Folder in question.  How can I correct it?  I have tried every thing I can think of, even deleting the Folders & reintalling them.  For some strange reason the "show view options" only does not work on the last 8 Folders in the Folder in question.

    Instead GarageBand recognize my keyboard and i can play normally, also, if it can help, those are the Audio and Midi Logic Preferences and the Controller Surfaces Setup with the keyboard connected :

  • Emails will not send when connected to wifi

    Emails on my iPad and iPhone will not send when connected to wifi, any help would be appreciated

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
     Cheers, Tom

  • Why will Firefox will not open when connecting via Remote Desktop?

    I have Firefox v. 6.0 or 7.0 installed on a Win 7 machine. It works fine locally, but when I connect to the machine via Remote Desktop it will not start.

    Make sure that the pref dom.storage.enabled is set to true on the about:config page.
    * http://kb.mozillazine.org/Dom.storage.enabled
    * https://developer.mozilla.org/en/dom/storage (Storage location and clearing the data)
    To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
    If you see a warning then you can confirm that you want to access that page.<br />

  • TS1398 Watch espn app will not work when connected to wifi

    Certain places I can't  use the watch espn app. In fact none of my apps work since this update. Anybody know how can fix it? It shows connected to wifi but will not access any apps or app store that are internet based.

    Does the iPod connect to other networks?
    Try:
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>GeneralReset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • My iPhone 4 will not charge when connected to a Toshiba S-75 computer.

    I have an iPhone 4 that charged on a USB connection to a HP computer. I recently purchased a Toshiba S75-A7221 laptop, which has the "sleep and charge" feature. At first, the phone would charge, then it started to beep, so did the laptop. One beep alternates with the other. I contacted Toshiba. They indicate that for $49 they can reset the computer, and that will fix the problem. I am not so sure, as the Toshiba documentation indicates that for some loads, the sleep and charge feature will not work. Should I continue to pursue the Toshiba group or just charge the iphone with the small cube charger and forget about connecting it or updating it through this computer? A fix is desired, but if there is none, just a reminder that maybe Toshiba laptop computers do not have enough output current to charge an iPhone.

    What you describe is not an Apple or iPhone issue.
    Talk to Toshiba.  If you chose to pursue the issue with them, that is up to you.  No one here can tell you what the correct solution is.
    Keep in mind, all iPhones ship will a wall plug to permit the device being charged from a wall outlet.

  • My iTunes 10.4 will not open when connected with my iPod Touch (v.4.3.5), however, it used to in the past- can anyone help me?  Thanks.

    I am curious as to why my iTunes 10.4 won't open when connected with my Touch (v.4.3.5).  iTunes used to open  when connected with my Touch.  Can anyone help me?  Thankyou.

    I have got a solution, it was shared on another 'apple support coummunity' board:
    https://discussions.apple.com/message/15830348#15830348
    It worked for me

  • My ipod touch 5th gen will not charge when connected to pc. works when plugged into wall

    I just got my 5th gen ipod today, and when i plug it into my pc (and my roommate's) they make the sound as if something is connected, but my ipod does not charge. When I plug it into my wall charger, it works fine. I've tried multiple cables, and multiple PCs, but it makes no difference. The weirdest thing though, is when I restart my computer, when it is about to close windows, it starts charging for a few seconds, then turns back off. This is so confusing. Any ideas?

    Sounds like the computer's USB ports do not provide enough current to charge the iPod when the screen is on. I would connect a partially discharged iPod to the computer for a couple of hours and see it it is charged.

  • IPhone 4 will not charge when connected to power

    I have tried the home/ power trick and at first it went to the apple logo then would power up and then cycle off and then repeat infinitely. Now the phone is so low on power that it only shows either the lightening bolt while connected or the cord + lightening bolt when not connected to power. It is still not charging though. I left plugged in overnight and still no change.Help please

    If not a problem with the power adaptor or cable being used, more than likely the iPhone has a hardware problem with the battery or something else. Make an appointment at an Apple store if there is one nearby.

  • My iphone will not sync when connected to itunes

    I just purchased an iphone5.  I have an ipad and have connected that to itunes, but when i connect my phone itunes doesn't recognize it and it doesnt sync?
    Any suggestions.

    appledumplingwithcaramelsauce_2 wrote:
    Nothing happens did you not read my question properly
    Then why did you mark the response as correct/solved?
    You could help out here. Something must happen. Some series of events takes place even of the devices don't sync. That's what AmishCake is asking.

  • IPod shuffle will not charge when connected to other computers.

    A girl I work with had me load her shuffle on my computer. I set it up and synced with my itunes and everything worked well. Then the battery ran out and she tried to connect it to a computer at work and it said that it was already synced with an itunes library. She left it plugged for a few hours anyway and when she unplugged it there was no charge in it. Both computers are iMacs and it was plugged into a usb on the back of the computer. Thanks dudes.

    In Settings in iTunes (while shuffle is plugged in) UNcheck "Open iTunes when this iPod is attached) and click apply... This will allow charging w/o iTunes involvement.

  • Itunes will not open when connecting iPhone

    Does any one have a clue how to fix this issue? I have two iPhones (my wife's and mine). I don't have that problem with her's. Thanks in advance.

    That support document was for if the iPhone was not recognized by iTunes. You say now that it is, and that is why you do not see a solution.
    I'm not sure about the setting for opening iTunes, because I have automatic syncing turned off. That can be especially important if you are having issues with the phone. An automatic sync can delete things when syncing with an empty calendar, or contacts list. I've always opened my iTunes manually, but you can also uninstall iTunes and reinstall it. If you are using Windows, you need to do this by following this support document exactly. http://support.apple.com/kb/HT1923

  • My ipad air will not charge when connected to any outlet with its own cable and plug.

    I had this Ipad Air since March 2014 and always kept it updated and charged, but since three days ago it does not seems to like its own charging cable and plug that came with it. I tried different outlets and other cords and plugs. I closed and restarted it, but no result. Now it is off because of no battery power. What can it be?

    Try the following:
    Option 1
    1. Settings>Airplane Mode>ON
    2. Turn the iPad OFF
    3. Leave unit off for about 20 seconds. 
    4. Turn the iPad back on and it should now show "charging"
    5. Turn Aeroplane Mode OFF
    Option 2
    Reset iPad and when the apple logo shows up, plug in the charger.

  • E71 - Speaker not functioning when connected to th...

    I tried conneceted to the Headset to my E71 and as the coonverstation was lenghty, I tried to switch it back the LoudSpeaker option without unpluging from the handset. But it didn't work. Any work around or is this the feature of the handset?
    Shriram

    Try:
    - Go to Jambox's support site
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • IChat AV not working when connecting wirelessly thru Netgear router

    Ok, I have read nearly EVERY forum out there about this issue, and I have tried nearly everything. I even called Apple. Noone can seem to figure out what the deal is.
    I have a Netgear WGR614 v5, and it is connected to a modem that I got from RoadRunner (Time Warner Cable).
    My cousin, who has a Mac identical to mine, is set up in the same fashion with a Netgear router.
    Neither of us can get a video connection using iChat. When we click the Accept button, it says "Connecting to ...." and then we both get an error that basically says there was a "communication error".
    I was informed of an Apple test address that I could test it with. AIM username is appleu3test03. I added it to my iChat buddy list, and clicked on the camera icon, and voila! It connected and I get an iPhone video (which is what is supposed to happen)
    So, what EXACTLY is that supposed to tell me???? The Apple test site says that means there is no problem with my connection, but that the issue is on my end somewhere....but I don't understand how that can be.
    Anyway, I don't have ANY firewalls on, and it works when I am connected directly with an Ethernet cable.
    PLEASE!!! HELP!!
    Thanks
    Cynthia

    Hi arvideo,
    OK IS the UPnP on in this device ?
    And no Port Forwarding or Services set ?
    IS it the only device connected to the internet ? (is there another router or a modem ?)
    1:18 PM Sunday; August 12, 2007

Maybe you are looking for

  • T400 not booting at all.

    My T400 is not booting at all. When I power it on, no matter it's on AC or battery, it just shows the boot screen Black Screen with Thinkpad written (in BIG white letters). and "To Interrupt normal setup, press the blue ThinkVantage button"  I tried

  • Unable to load data store in a new model

    Hi, I have Win XP Pro SP3. MS SQL 2008 which has adventure works DW2008R2 database. I have oracle data integrator. I have created a physical and logical schema and have established a connection with my MS SQL 2008 and the test connection is successfu

  • The iPad's hardware system doesn't work.

    I have an iPad 2, which won in 2013 and today the hardware operating system this product is fail, as the screen freezes, it turns on and off alone, applications open and close alone. In 2014 and now the screen is just flashing with lime-green color,

  • Hi all, My macbook has been dropped and completley smashed...

    Hi all, My macbook has been dropped and completley smashed...i.e bent battery, smashed screen,etc   I have already ordered a new macbook air, the question is i need to get my data of the old one as my last back up was exactly 6 months ago, is that po

  • How to create select-options for 3 fields out of 5 by FREE_SELECTIONS_INIT

    Hi Experts, I am using the Function Modules FREE_SELECTIONS_INIT and FREE_SELECTIONS_DIALOG to create the select-options dynamically on the selection screen. My problem is that I am passing a field list of 10 fields in the FIELDS_TAB of the function.