A Exception about :Tow -phase txns not allowed

I meet the excepiton like below:
java.rmi.ServerException: Could not obtain JDBC Connection from datasource: DataSource2; nested exception is:
java.sql.SQLException: ITS-7004: Two-phase txns not allowed with JDBC
java.sql.SQLException: ITS-7004: Two-phase txns not allowed with JDBC
i don't konw what the problem result in.
I use the Same connection for the JNDI name DataSource1 and DataSource2, is this a problem?
but the DataSource1 connected very well.
btw:who knows the word:txns 's meaning?

"txns" means "transactions".
"Two-phase transactions" is a database term that refers to reliable updating of more than one database at a time.

Similar Messages

Java.lang.Exception: User : principals=[admin] is not allowed to shutdown the server

Hi,
When i shut down my managed and admin servers through the console i am getting
the following exception.Any one have an idea on this?
Exception :
java.lang.Exception: User : principals=[admin] is not allowed to shutdown the
server.
     at weblogic.server.ServerLifeCycleRuntime.shutdown(ServerLifeCycleRuntime.java:299)
     at java.lang.reflect.Method.invoke(Native Method)
     at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:750)
     at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:732)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
     at weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServerImpl.java:928)
     at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:472)
     at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:200)
     at $Proxy105.shutdown(Unknown Source)
     at java.lang.reflect.Method.invoke(Native Method)
     at weblogic.management.console.actions.mbean.DoMBeanOperationAction.performOnSingle(DoMBeanOperationAction.java:206)
     at weblogic.management.console.actions.mbean.DoMBeanOperationAction.perform(DoMBeanOperationAction.java:188)
     at weblogic.management.console.actions.internal.ActionServlet.doAction(ActionServlet.java:171)
     at weblogic.management.console.actions.internal.ActionServlet.doPost(ActionServlet.java:85)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1075)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:418)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:306)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:5517)
     at weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManager.java:685)
     at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3156)
     at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2506)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:234)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:210)

I have the exact same problem. It is for a WLI 7.0 SP-5 domain. I started admin and managed servers using the startWeblogic and startManagedWebLogic scripts, but trying to stop them from the console is throwing this exception:
java.lang.Exception: User : principals=[admin] is not allowed to shutdown the server.
     at weblogic.server.ServerLifeCycleRuntime.shutdown(ServerLifeCycleRuntime.java:299)
     at java.lang.reflect.Method.invoke(Native Method)
     at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:736)
     at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:718)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
     at weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServerImpl.java:1107)
     at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:472)
     at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:200)
     at $Proxy105.shutdown(Unknown Source)
     at java.lang.reflect.Method.invoke(Native Method)
     at weblogic.management.console.actions.mbean.DoMBeanOperationAction.performOnSingle(DoMBeanOperationAction.java:206)
     at weblogic.management.console.actions.mbean.DoMBeanOperationAction.perform(DoMBeanOperationAction.java:188)
     at weblogic.management.console.actions.internal.ActionServlet.doAction(ActionServlet.java:171)
     at weblogic.management.console.actions.internal.ActionServlet.doPost(ActionServlet.java:85)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1094)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:437)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:319)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:5626)
     at weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManager.java:685)
     at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3213)
     at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2555)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:251)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:219)
I upgraded from WLI7.0 SP-1 to SP-5, and since then I am getting this error.
Please help!

The type initializer for 'System.Data.SqlClient.SqlConnection' threw an exception. InnerException: Requested registry access is not allowed.

I have read some of the other posts for people that got this error, but none seem to apply to me.
My program has been working for weeks. I made some minor changes, and started getting the error (full details below).
I did a TFS "undo pending changes" and still getting the same error, even after logging off. The one odd thing is that I did change my Windows password this week. The connection string is using a SQL user id and password that has no issues.
I'm an Admin own my own box (running WIn XP SP3). I even tried "Run as Admin" on Visual Studio.
I'm doing a Debug-Start, running a Console-Test-Program that calls a WCF service, which on local machine is hosted by "ASP.NET Development Server".
We have two other developers, one has the same problem, one does not. In theory, we have all done "get latest" and are running the same code.
The SQL Connection is related to a trace database; we are using this library http://ukadcdiagnostics.codeplex.com which has worked fine for months.
When I do "Start Run" in Visual Studio, I get this error:
{"The type initializer for 'System.Data.SqlClient.SqlConnection' threw an exception. "}
with InnerException: {"The type initializer for 'System.Data.SqlClient.SqlConnectionFactory' threw an exception."}
and it has InnerException: {"Requested registry access is not allowed. "}
Outmost StackTrace:
   at System.Data.SqlClient.SqlConnection..ctor()
   at System.Data.SqlClient.SqlConnection..ctor(String connectionString)
   at FRB.Diagnostics.Listeners.SqlDataAccessCommand..ctor(String connectionString, String commandText, CommandType commandType)
   at FRB.Diagnostics.Listeners.SqlDataAccessAdapter.CreateCommand()
   at FRB.Diagnostics.Listeners.SqlTraceListener.TraceEventCore(TraceEventCache eventCache, String source, TraceEventType eventType, Int32 id, String message)
   at FRB.Diagnostics.Listeners.CustomTraceListener.FilterTraceEventCore(TraceEventCache eventCache, String source, TraceEventType eventType, Int32 id, String message)
   at FRB.Diagnostics.Listeners.CustomTraceListener.TraceEvent(TraceEventCache eventCache, String source, TraceEventType eventType, Int32 id, String format, Object[] args)
   at System.Diagnostics.TraceSource.TraceEvent(TraceEventType eventType, Int32 id, String format, Object[] args)
   at System.Diagnostics.TraceSource.TraceInformation(String message)
   at FRB.EC.AdminService.AdminService.TestHelloWorldWithTrace(String name)
   at SyncInvokeTestHelloWorldWithTrace(Object , Object[] , Object[] )
   at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs)
   at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin(MessageRpc& rpc)
Second Inner StackTrace:
   at System.Data.SqlClient.SqlConnection..cctor()
Third Inner StackTrace:
      at System.Data.SqlClient.SqlConnectionFactory..cctor()
When I do "Run as Admin", I get this error:
{"Could not load file or assembly 'FRB.EFDataAccess, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. Access is denied. "}
Server stack trace:
   at System.ServiceModel.Channels.ServiceChannel.ThrowIfFaultUnderstood(Message reply, MessageFault fault, String action, MessageVersion version, FaultConverter faultConverter)
   at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at FRB.EC.AdminService.ConsoleTester.svcRef.IAdminService.GetDispositionStatusTypeList()
   at FRB.EC.AdminService.ConsoleTester.svcRef.AdminServiceClient.GetDispositionStatusTypeList() in C:\SourceEagleConnect\EagleConnect\Dev\WCFServices\FRB.EC.AdminService.ConsoleTester\Service References\svcRef\Reference.cs:line 2459
   at FRB.EC.AdminService.ConsoleTester.ConsoleProgram.GetDispositionStatusTypeList() in C:\SourceEagleConnect\EagleConnect\Dev\WCFServices\FRB.EC.AdminService.ConsoleTester\ConsoleProgram.cs:line 565
   at FRB.EC.AdminService.ConsoleTester.ConsoleProgram.ExecuteNewRelease103QueryMethods() in C:\SourceEagleConnect\EagleConnect\Dev\WCFServices\FRB.EC.AdminService.ConsoleTester\ConsoleProgram.cs:line 189
   at FRB.EC.AdminService.ConsoleTester.ConsoleProgram.Main(String[] args) in C:\SourceEagleConnect\EagleConnect\Dev\WCFServices\FRB.EC.AdminService.ConsoleTester\ConsoleProgram.cs:line 76
   at System.AppDomain._nExecuteAssembly(RuntimeAssembly assembly, String[] args)
   at System.AppDomain.ExecuteAssembly(String assemblyFile, Evidence assemblySecurity, String[] args)
   at Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly()
   at System.Threading.ThreadHelper.ThreadStart_Context(Object state)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean ignoreSyncCtx)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
   at System.Threading.ThreadHelper.ThreadStart()
I am also posting the web.config/app.config, but I would rather not focus on that since there were absolutely no changes to it between the time it was working and the time it began failing.
Client app.config
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
<connectionStrings>
</connectionStrings>
<system.serviceModel>
    <behaviors>
      <serviceBehaviors>
        <behavior name="ServiceBehavior">
          <serviceMetadata httpGetEnabled="true"/>
          <serviceDebug includeExceptionDetailInFaults="false"/>
          <serviceAuthorization impersonateCallerForAllOperations="true"/>
        </behavior>
      </serviceBehaviors>
      <endpointBehaviors>
        <behavior name="FRB.AllowImpersonate">
          <clientCredentials>
            <windows allowedImpersonationLevel="Impersonation"/>
          </clientCredentials>
        </behavior>
      </endpointBehaviors>
    </behaviors>
    <bindings>
      <wsHttpBinding>
        <binding name="WSHttpBinding_IAdminService" closeTimeout="00:01:00"
          openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00"
          bypassProxyOnLocal="false" transactionFlow="false" hostNameComparisonMode="StrongWildcard"
          maxBufferPoolSize="524288" maxReceivedMessageSize="5565536"
          messageEncoding="Text" textEncoding="utf-8" useDefaultWebProxy="true"
          allowCookies="false">
          <readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384"
            maxBytesPerRead="4096" maxNameTableCharCount="16384" />
          <reliableSession ordered="true" inactivityTimeout="00:10:00"
            enabled="false" />
          <security mode="Message">
            <transport clientCredentialType="Windows" proxyCredentialType="None"
              realm="" />
            <message clientCredentialType="Windows" negotiateServiceCredential="true"
              algorithmSuite="Default" />
          </security>
        </binding>
      </wsHttpBinding>
    </bindings>
        <client>
              <endpoint address="http://localhost:3588/AdminService.svc" binding="wsHttpBinding"
                    bindingConfiguration="WSHttpBinding_IAdminService" contract="svcRef.IAdminService"
                    name="WSHttpBinding_IAdminService">
                    <identity>
                          <dns value="localhost" />
                    </identity>
              </endpoint>
        </client>
    </system.serviceModel>
</configuration>
web.config of WCF service:
<?xml version="1.0"?>
<configuration>
    <configSections>
    <section name="FRB.Diagnostics" type="FRB.Diagnostics.Configuration.UkadcDiagnosticsSection, FRB.Diagnostics"/>
</configSections>
    <appSettings>
       
    </appSettings>
    
<connectionStrings>
    <add name="log" connectionString="Data Source=myserver;Initial Catalog=ECWCFLOG_SharedDev;User ID=myuser;Password=mypass;MultipleActiveResultSets=True" providerName="System.Data.SqlClient"/>
    <add name="DBConn" connectionString="Data Source=myserver;Initial Catalog=ECData_SharedDev;User ID=myuser;Password=mypass;MultipleActiveResultSets=True" providerName="System.Data.SqlClient"/>
    <add name="EagleConnectEntities" connectionString="metadata=res://*/EagleConnect.csdl|res://*/EagleConnect.ssdl|res://*/EagleConnect.msl;provider=System.Data.SqlClient;provider connection string="Data Source=myserver;Initial
Catalog=ECData_SharedDev;User ID=myuser;Password=mypass;MultipleActiveResultSets=True"" providerName="System.Data.EntityClient"/>
</connectionStrings>
    
    <FRB.Diagnostics>
        <sqlTraceListeners>
            <sqlTraceListener name="sqlTraceListenerSettings"
                        connectionStringName="log"
                        commandText="INSERT INTO LogStore VALUES(@Source, @ActivityId, @ProcessId, @ThreadId, @EventType, @Message, @Timestamp)"
                        commandType="Text">
                <parameters>
                    <parameter name="@Source" propertyToken="{Source}"/>
                    <parameter name="@ActivityId" propertyToken="{ActivityId}"/>
                    <parameter name="@ProcessId" propertyToken="{ProcessId}"/>
                    <parameter name="@ThreadId" propertyToken="{ThreadId}"/>
                    <parameter name="@EventType" propertyToken="{EventType}" callToString="true"/>
                    <parameter name="@Message" propertyToken="{Message}"/>
                    <parameter name="@Timestamp" propertyToken="{DateTime}"/>
          
        </parameters>
            </sqlTraceListener>
        </sqlTraceListeners>
        <smtpTraceListeners>
            <smtpTraceListener name="smtpTraceListenerSettings"
                         host="vssmtp"
                         port="25"
                         from="[email protected]"
                         to="[email protected]"
                         subject="AdminService Logging Event: {EventType}, {MachineName}"
                         body="{Message}
=======
Process={ProcessId},
Thread={ThreadId},
ActivityId={ActivityId}"/>
        </smtpTraceListeners>
    </FRB.Diagnostics>
    
    <system.diagnostics>
        <sources>
            <source name="FRB.EC.AdminService" switchValue="All">
                <listeners>
                    <clear/>
                    <add name="ods"/>
                    <add name="smtp"/>
                    <add name="sql"/>
                </listeners>
            </source>
            <source name="System.ServiceModel" switchValue="Off" propagateActivity="true">
                <listeners>
                    <add name="ignored" type="System.Diagnostics.ConsoleTraceListener"/>
                </listeners>
            </source>
        </sources>
        <sharedListeners>
            
            <add name="ods"
           type="FRB.Diagnostics.Listeners.OutputDebugStringTraceListener, FRB.Diagnostics"
           initializeData="{ActivityId}|{EventType}: {Message} - {DateTime}, Process={ProcessId}, Thread={ThreadId}"/>
            
            <add name="sql"
           type="FRB.Diagnostics.Listeners.SqlTraceListener, FRB.Diagnostics"
           initializeData="sqlTraceListenerSettings"
           traceOutputOptions="Timestamp"/>
            
            <add name="smtp"
           type="FRB.Diagnostics.Listeners.SmtpTraceListener, FRB.Diagnostics"
           initializeData="smtpTraceListenerSettings">
                   <filter type="System.Diagnostics.EventTypeFilter"
                   initializeData="Error"/>
            </add>
        </sharedListeners>
        <trace autoflush="true"/>
    </system.diagnostics>
    <system.web>
    <compilation debug="true" targetFramework="4.0">
    </compilation>
        <roleManager enabled="true" defaultProvider="AspNetWindowsTokenRoleProvider"/>
    </system.web>
    <system.serviceModel>
        <services>
            <service name="FRB.EC.AdminService.AdminService"
               behaviorConfiguration="FRB.EC.AdminService.AdminServiceBehavior">
                
                <endpoint address="" binding="wsHttpBinding"
                  bindingConfiguration="wsHttpEndpointBinding"
                  contract="FRB.EC.AdminService.IAdminService">
                    
                    <identity>
                        <dns value="localhost"/>
                    </identity>
                </endpoint>
                <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange"/>
            </service>
        </services>
        <bindings>
            <wsHttpBinding>
                <binding name="wsHttpEndpointBinding"
                 maxBufferPoolSize="2147483647"
                 maxReceivedMessageSize="500000000">
                    <readerQuotas maxDepth="2147483647"
                        maxStringContentLength="2147483647"
                        maxArrayLength="2147483647"
                        maxBytesPerRead="2147483647"
                        maxNameTableCharCount="2147483647"/>
                    <security>
                        <message clientCredentialType="Windows"/>
                    </security>
                </binding>
            </wsHttpBinding>
        </bindings>
        <behaviors>
            <serviceBehaviors>
                <behavior name="FRB.EC.AdminService.AdminServiceBehavior">
                    
                    <serviceMetadata httpGetEnabled="true"/>
                    
                    <serviceDebug includeExceptionDetailInFaults="true"/>
                    <serviceCredentials>
                    </serviceCredentials>
                    
                    <serviceAuthorization principalPermissionMode="UseWindowsGroups"
                                impersonateCallerForAllOperations="true"/>
                </behavior>
                <behavior name="FRB.EC.AdminService.IAdminServiceTransportBehavior">
                    
                    <serviceMetadata httpGetEnabled="true"/>
                    
                    <serviceDebug includeExceptionDetailInFaults="false"/>
                    <serviceCredentials>
                        <clientCertificate>
                            <authentication certificateValidationMode="PeerTrust"/>
                            
                        </clientCertificate>
                        <serviceCertificate findValue="WCfServer"
                                storeLocation="LocalMachine"
                                storeName="My" x509FindType="FindBySubjectName"/>
                    </serviceCredentials>
                </behavior>
            </serviceBehaviors>
        </behaviors>
        <serviceHostingEnvironment multipleSiteBindingsEnabled="true"/>
    </system.serviceModel>
    <system.webServer>
        <modules runAllManagedModulesForAllRequests="true"/>
    </system.webServer>
</configuration>
Thanks for any help.
Neal

I think I found it... this is sure a strange error for what is really happening.
Apparently it had happened to me before, and fortuantely, I actually added the following comment:
            // Above is related to the WCFLOG SQL Diagnostics Trace
            // If you get error here an inner exception "requested registry access is not allowed"
            // inside exception "type initializer for System.Data.SqlClient.SqlConnection"
            // then make sure you have impersonation enabled in your client.
            // See AdminConsole web.config or FRB.EC.AdminService.ConsoleTester.app.config for examples
Now I think I will do a try catch and spit out the same text.
Still testing to assure that this really was the issue.
      <endpointBehaviors>
        <behavior name="FRB.AllowImpersonate ">
          <clientCredentials>
            <windows allowedImpersonationLevel="Impersonation"/>
          </clientCredentials>
        </behavior>
      </endpointBehaviors>
The line below in BOLD below is what somehow seemed to disappear from my app.config - probably due to a TFS human error - still checking that also:
        <client>
              <endpoint address="http://localhost:4998/AdminService.svc"
                              behaviorConfiguration="FRB.AllowImpersonate"
                              binding="wsHttpBinding"
                          bindingConfiguration="WSHttpBinding_IAdminService"
                             contract="svcRef.IAdminService"
                        name="WSHttpBinding_IAdminService">
                    <identity>
                          <dns value="localhost" />
                    </identity>
              </endpoint>
        </client>
Here's how I "idiot-proofed" this error for now, to give an error that actually at least points to a solution:
        public SqlDataAccessCommand(string connectionString, string commandText, CommandType commandType)
            try
                _connection = new SqlConnection(connectionString);
                // Above is related to the WCFLOG SQL Diagnostics Trace
                // If you get error here an inner exception "requested registry access is not allowed"
                // inside exception "type initializer for System.Data.SqlClient.SqlConnection"
                // then make sure you have impersonation enabled in your client.
                // See AdminConsole web.config or FRB.EC.AdminService.ConsoleTester.app.config for examples
            catch (Exception ex)
                if (ex.ToString().Contains("The type initializer for"))
                throw new System.ApplicationException(@"
                Your client app <endpoint> must be cofigured have a
              'behaviorConfiguration' attribute like this:
                behaviorConfiguration='FRB.AllowImpersonate'
               that points back to a behavior that has this syntax:
          <behavior name='FRB.AllowImpersonate'>
             <clientCredentials>
                 <windows allowedImpersonationLevel='Impersonation'/>
             </clientCredentials>
          </behavior>
          ", ex);
               else
                    throw ex;
            _command = _connection.CreateCommand();
            _command.CommandText = commandText;
            _command.CommandType = commandType;
            // TODO _command.CommandTimeout = ;
Neal

The operation is not allowed for result set type FORWARD_ONLY

Hi,
I am trying to use scroll insensitive resultset in following manner-
Statement stmt = con.createStatement(ResultSet.TYPE_SCROLL_SENSITIVE, ResultSet.CONCUR_READ_ONLY);
ResultSet rs = stmt.executeQuery("some sql here");
rs.last();
but the rs.last() throws this exception-
com.sap.dbtech.jdbc.exceptions.SQLExceptionSapDB: The operation is not allowed for result set type FORWARD_ONLY.
     at com.sap.dbtech.jdbc.ResultSetSapDB.assertNotForwardOnly(ResultSetSapDB.java:2725)
     at com.sap.dbtech.jdbc.ResultSetSapDB.last(ResultSetSapDB.java:557)
Database version: Kernel    7.5.0    Build 019-121-082-363
Driver Version: MaxDB JDBC Driver, MySQL MaxDB, 7.6.0    Build 030-000-005-567
This used to work with 7.5 version driver. Why this is failing with 7.6 driver, any clues?
Thanks,
Vinod

Hi Vinod,
due to performance improvement when using forward only cursor we changed the default for the resultset type from TYPE_SCROLL_SENSITIVE to TYPE_FORWARD_ONLY starting with JDBC driver version 7.6. So I guess the exception comes from a statement where you didn't set the resultset type while creating it. Please check if all of the statements that you want to be scrollable have set the correct resultset type.
Regards,
Marco

Do not allow user to enter non-number data.

Hello
For some reason the have used the TEXT FIELD object for numeric data input field.
Actually, user has to always enter numeric data ONLY.
No decimals, no commas, no alphabetical characters allowed except numbers.
(Syststem should not allow user enter non-allowed data at all....i mean to say, when we achive by using Numeric field/object.... or If user trying to enter any non-allowed data i hv to throw an error and CLEAR the field immediately)
Pls. let me know How to get my requirement? Do i need to use JavaScript or Pattern or Validation Pattern in object pallette or ALL 3?
I am newbie, pls. provide me the code (if JavaScript)
Thank you

http://forums.adobe.com/message/4265578#4265578

ORA-02089: COMMIT is not allowed in a subordinate session

Here is my configuration.
jdbc driver:10.2.0.3.0
EJB-CMP
Am using oracle.jdbc.xa.client.OracleXADataSource as the driver in my websphere application server 6.0.0.1.
when i am calling a stored procedure from my EJB and in the stored procedure if
i perform any DDL operation like truncate a table,create a table or commit it throws the exception:-
ORA-02089: COMMIT is not allowed in a subordinate session
please help me in solving this issue asap.

hi umesh ,
i had seen this link before ,
My oracle version is 10g.still its giving the same error.
In the link yoy send they say the problem is in oracle 9i driver and it is solved in 10g .The driver version is 10.2.0.3 ,still i get the same error.
do u have any idea?
Regards,
sreenath.

My iPhone 5 pairs with my automobile except it does not allow me to "pickup" calls using the car facility. I've contacted Acura RDX 2013 about this problem. It referred me Apple for a fix. My iPhone 4 worked with the car technology.

My iPhone 5 pairs with my automobile except it does not allow me to "pickup" calls using the car facility. I've contacted Acura RDX 2013 about this problem. It referred me Apple for a fix. My iPhone 4 worked with the car technology. Is there a fix for the iPhone 5 to allow call pickup via the Acura?
Thanks

HI Friend,
Probably the problem it is because your iPhone 4 and your car have the same Bluetooth technology ( 2.1 ), but iPhone 5 has new Bluetooth technology ( 4.0 ).
http://www.apple.com/iphone/compare-iphones/

JBoss, JSF exception: #{..} is not allowed in template text

I've created a simple JSF login application using MyEclipse IDE. I deployed the application on JBoss 4.2.1. At first it failed to deploy. After some searching, I followed the instructions at:
http://forum.java.sun.com/thread.jspa?threadID=5176676&messageID=9923048
I deleted the JSF related jar files in the JSF application's WEB-INF/lib folder. The application was then only successfully deployed.
Question #1: Is there a conflict with the jar files, which prevents the application from being deployed. Does someone know the right way to solve this issue
Now when I access my page in the browser at the URL:
http://localhost:8080/JSF_tutorial/userLogin.faces
I see the following exception:
org.apache.jasper.JasperException: /userLogin.jsp(32,29) #{..} is not allowed in template text
     org.apache.jasper.compiler.DefaultErrorHandler.jspError(DefaultErrorHandler.java:40)
     org.apache.jasper.compiler.ErrorDispatcher.dispatch(ErrorDispatcher.java:407)
     org.apache.jasper.compiler.ErrorDispatcher.jspError(ErrorDispatcher.java:102)
     org.apache.jasper.compiler.Validator$ValidateVisitor.visit(Validator.java:711)
     org.apache.jasper.compiler.Node$ELExpression.accept(Node.java:935)
     org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2336)
     org.apache.jasper.compiler.Node$Visitor.visitBody(Node.java:2386)
     org.apache.jasper.compiler.Node$Visitor.visit(Node.java:2392)
     org.apache.jasper.compiler.Node$Root.accept(Node.java:489)
     org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2336)
     org.apache.jasper.compiler.Validator.validate(Validator.java:1737)
     org.apache.jasper.compiler.Compiler.generateJava(Compiler.java:178)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:306)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:286)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:273)
     org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:566)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:311)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:320)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
     com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:408)
     com.sun.faces.application.ViewHandlerImpl.executePageToBuildView(ViewHandlerImpl.java:442)
     com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:115)
     com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:106)
     com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:251)
     com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:144)
     javax.faces.webapp.FacesServlet.service(FacesServlet.java:245)
     org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
Question #2: How do I get rid of the above exception?
thanks,

tsc wrote:
I've created a simple JSF login application using MyEclipse IDE. I deployed the application on JBoss 4.2.1. At first it failed to deploy. After some searching, I followed the instructions at:
http://forum.java.sun.com/thread.jspa?threadID=5176676&messageID=9923048
I deleted the JSF related jar files in the JSF application's WEB-INF/lib folder. The application was then only successfully deployed.
Question #1: Is there a conflict with the jar files, which prevents the application from being deployed. Does someone know the right way to solve this issue
I'm not entirely sure what you are asking here; do you want to be able to include an implementation of JSF with your WAR file? In any case, I suspect your question is answered on the JBoss Wiki pages for JSF.
Now when I access my page in the browser at the URL:
http://localhost:8080/JSF_tutorial/userLogin.faces
I see the following exception:
org.apache.jasper.JasperException: /userLogin.jsp(32,29) #{..} is not allowed in template text
Question #2: How do I get rid of the above exception?
My best guess is that you are somehow configured to use JSP 1.x instead of JSP 2.1 (see http://www.google.com/codesearch?q=jsp.error.el.template.deferred). Check your tag library tld versions.

SSL exception: Duplicate extensions not allowed

Hi,
I have problem with connecting to exchange mail server with java(java mail)
I get this exception.
javax.net.ssl.SSLProtocolException: java.io.IOException: Duplicate extensions not allowed.
Caused by: java.io.IOException: Duplicate extensions not allowed
at sun.security.x509.CertificateExtensions.parseExtension(Unknown Source)
at sun.security.x509.CertificateExtensions.init(Unknown Source)
at sun.security.x509.CertificateExtensions.<init>(Unknown Source)
at sun.security.x509.X509CertInfo.parse(Unknown Source)

So, google has very little about that.
I found that x509 have something like extensions and if i run java with debug -Djavax.net.debug=ssl
I see
adding as trusted cert:
Subject: CN=T-TeleSec GlobalRoot Class 2, OU=T-Systems Trust Center, O=T-Systems Enterprise Services GmbH, C=DE
Issuer: CN=T-TeleSec GlobalRoot Class 2, OU=T-Systems Trust Center, O=T-Systems Enterprise Services GmbH, C=DE
Algorithm: RSA; Serial number: 0x1
Valid from Wed Oct 01 12:40:14 CEST 2008 until Sun Oct 02 01:59:59 CEST 2033
adding as trusted cert:
Subject: EMAILADDRESS=[email protected], CN=http://www.valicert.com/, OU=ValiCert Class 2 Policy Validation Authority, O="ValiCert, Inc.", L=ValiCert Validation Network
Issuer: EMAILADDRESS=[email protected], CN=http://www.valicert.com/, OU=ValiCert Class 2 Policy Validation Authority, O="ValiCert, Inc.", L=ValiCert Validation Network
Algorithm: RSA; Serial number: 0x1
Valid from Sat Jun 26 02:19:54 CEST 1999 until Wed Jun 26 02:19:54 CEST 2019
I dont know if this is that extensions. But i see that some subject are duplicated. Maybe this is all about.

When i am typing in a browser window, my browser page shifts slightly, highlights in blue, and does not allow me to keep typing. i have to keep clicking on the page to continue to type letter by letter...is there some function on that i don't know about?

When I am typing in a browser window, my browser page shifts slightly, highlights in blue, and does not allow me to continue typing...i have to click in the browser to allow typing to continue...is there a function running that I don't know about?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
Note: If you’ve activated “Find My Mac” or FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

Recently when opening up Photoshop, my Adobe CS6 Master Collection pops up saying there's some kind of offer going on the Creative Cloud. For awhile I was just able to close out of it and go about my business on Photoshop, but now it's not allowing me to

Recently when opening up Photoshop, my Adobe CS6 Master Collection pops up saying there's some kind of offer going on the Creative Cloud. For awhile I was just able to close out of it and go about my business on Photoshop, but now it's not allowing me to open Photoshop unless I sign up/pay. I'm quite confused? I really NEED to have access to Photoshop ASAP.

Sign in, activation, or connection errors | CS5.5 and later
Mylenium

Exception: Call of execute(String) is not allowed for PreparedStatement

Hi all,
This query was run fine on SapDB 7.4 from Jave code using prepareStatement() method:
declare id11216053819634 cursor for select sc.name, measuredobjectid id from serviceconditions sc, measuredobjects mo where sc.collectionid = mo.collectionid and sc.name like 'DWindowsSLA/%,%,%,%' for reuse
declare id21216053819634 cursor for select min(sampletime), max(sampletime), name, id11216053819634.id from id11216053819634, d_slastore ss where id11216053819634.id = ss.measuredobjectid and ss.sampletime between '2008-07-14 00:00:00' and '2008-07-14 12:43:35' group by name, id11216053819634.id for reuse
select ss.status, ss.statuschange, ss.sampletime, id21216053819634.name from d_slastore ss, id21216053819634 where ss.measuredobjectid = id21216053819634.id and ss.sampletime between '2008-07-14 00:00:00' and '2008-07-14 12:43:35' and (statuschange != 0 or ss.sampletime = id21216053819634.expression1 or ss.sampletime = id21216053819634.expression2) order by name, sampletime
We recently upgrade our old SapDb to the latest MaxDB. An now this query produces the error:
com.sap.dbtech.jdbc.exceptions.JDBCDriverException: SAP DBTech JDBC: Call of execute(String) is not allowed for PreparedStatement.
Does anyone know how to fix this?
Thank you very much,
Irina

Hi Irina,
First, welcome to SDN!
Well, PreparedStatement represents a precompiled SQL statement, so you should be using the no-arg execute() method rather than execute(String).
HTH!
\-- Vladimir

Not allow subtopics Exception

Hi,
I'm receiving an Exception while sending a message to a specific subtopic with blazeds.
"msg.setHeader(AsyncMessage.SUBTOPIC_HEADER_NAME, "mySubtopic");" gives the following exception and I have search on this exception and cannot find a solution.
So how can i handle this exception?
Exception in thread "Thread-10" flex.messaging.services.ServiceException: Attempt to subscribe or unsubscribe to the subtopic, 'mySubtopic', on destination, 'BlazeDsServicePush', that does not allow subtopics failed.
    at flex.messaging.services.messaging.SubscriptionManager.addSubtopicSubscribers(Subscription Manager.java:275)
    at flex.messaging.services.messaging.SubscriptionManager.getSubscriberIds(SubscriptionManage r.java:241)
    at flex.messaging.services.MessageService.pushMessageToClients(MessageService.java:443)
    at com.codeofdoom.BlazeDsServiceAdapter.invoke(BlazeDsServiceAdapter.java:84)
    at flex.messaging.services.MessageService.serviceMessage(MessageService.java:276)
    at flex.messaging.services.MessageService.serviceMessage(MessageService.java:204)
    at flex.messaging.MessageBroker.routeMessageToService(MessageBroker.java:1503)
    at com.codeofdoom.BlazeDsServiceAdapter$PersonGenerator.run(BlazeDsServiceAdapter.java:64)
public class PersonGenerator extends Thread {
        public boolean running = true;
        public void run(){
            String clientId = UUIDUtils.createUUID();
            MessageBroker msgBroker = MessageBroker.getMessageBroker(null);
            while (running){
                AsyncMessage msg = new AsyncMessage();
                msg.setDestination("BlazeDsServicePush");
                msg.setClientId(clientId);
                List <Person>a= generatePersons();
                msg.setMessageId(UUIDUtils.createUUID());
                msg.setBody(a);
                msg.setHeader(AsyncMessage.SUBTOPIC_HEADER_NAME, "mySubtopic");
                msgBroker.routeMessageToService(msg,null);
                System.out.println("after msgBroker.routeMessageToService(msg,null);");
                try{
                    Thread.sleep(5000);
                }catch(InterruptedException e){
                    System.out.println("Exception");
                    e.printStackTrace();

Hi,
Did you setup your destination to accept subtopics ?
For example
<destination id="chat">
        <adapter ref="chatAdapter"/>
        <properties>
            <network>
                <session-timeout>0</session-timeout>
                <throttle-inbound policy="ERROR" max-frequency="50"/>
                <throttle-outbound policy="REPLACE" max-frequency="500"/>
            </network>
            <server>
                <allow-subtopics>true</allow-subtopics>
                <subtopic-separator>.</subtopic-separator>
                <max-cache-size>1000</max-cache-size>
                <message-time-to-live>0</message-time-to-live>
                <durable>true</durable>
            </server>
        </properties>
        <channels>
            <channel ref="my-streaming-amf"/>
        </channels>
    </destination>

HT5731 WILL NOT ALLOW ME TO DOWNLOAD A MOVIE THAT I HAVE A DIGITAL COPY FOR IT GIVES ME A MESSAGE ABOUT PURCHASING A HD VERSION VS SD VERSION

WILL NOT ALLOW ME TO DOWNLOAD A MOVIE THAT I HAVE A DIGITAL COPY FOR IT GIVES ME A MESSAGE about purchasing a hd version vs the sd version

Hello everyone,
I was having the exact same, irritating, problem. The only way I was able to work around this lovely little quirk was to redeem the code on my iPod touch. I would guess it would also work on any apple touch pad device. I only had to input the code once and it began downloading. I was then able to go back to my iTunes on PC and it began downloading there too.
*Sidenote: Be sure to uncheck the "Download HD when available" option.
I hope this works and helps the rest of you.

Java.sql.SQLException: Cannot obtain connection after 3600 seconds. , Exception = Access not allowed

Using Weblogic Platform 7.0 (installed from platform700_win32.exe),
Running a BPM Doamin(WLIDomain with BPM only).
When I try to access my entity bean(CMP), the following exception is getting thrown.
I have seen a similar post in here, but the answer to that post, which says to
provide ACL. does not apply quite well my scenario.
To do this, I right clicked on the connection pool and selected define Ploicy..
It shows two options
RealmAdapterAuthorizer and DefaultAuthorizer; On DefaultAuthroizer i specified
role accessing the resource would be "everyone". - restarted the server - but
still the same error.
Please suggest a solution if any. Do i have to get some service pack for this?
TIA
Ranjith.

We have never seen a case yet where this was not a permissions problem.
Do you have a fileRealm.properties file as part of your configuration?
"Ranjith" <[email protected]> wrote in message
news:3f0fdeb3$[email protected]..
>
java.sql.SQLException: Cannot obtain connection after 3600 seconds. ,Exception
= Access not allowed
java.sql.SQLException: Cannot obtain connection after 3600 seconds. ,Exception
= Access not allowed
atweblogic.jdbc.jts.Connection.wrapAndThrowSQLException(Connection.java:701)
atweblogic.jdbc.jts.Connection.getOrCreateConnection(Connection.java:623)
atweblogic.jdbc.jts.Connection.prepareStatement(Connection.java:133)
atweblogic.jdbc.rmi.internal.ConnectionImpl.prepareStatement(ConnectionImpl.ja
va:139)
atweblogic.jdbc.rmi.SerialConnection.prepareStatement(SerialConnection.java:81
atservice.samplemgt.v1_0.ejb.entity.BanksampletypeCMP_ckv0ao__WebLogic_CMP_RDB
MS.ej
bFindAll(BanksampletypeCMP_ckv0ao__WebLogic_CMP_RDBMS.java:873)
at java.lang.reflect.Method.invoke(Native Method)
atweblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.collectionFinder(RDBMSPersi
stenceManager
java:300)
atweblogic.ejb20.manager.BaseEntityManager.collectionFinder(BaseEntityManager.
java:715)
atweblogic.ejb20.manager.BaseEntityManager.collectionFinder(BaseEntityManager.
java:688)
atweblogic.ejb20.internal.EntityEJBLocalHome.finder(EntityEJBLocalHome.java:47
6)
at ...

A Exception about :Tow -phase txns not allowed

Similar Messages

Maybe you are looking for