A fatal error occured in the PD Layer during create Supplier RFx response
Dear SRM 7 Experts,
I am implementing SRM 7. I can successfully create a Supplier RFx Response on behalf of a supplier using the Surrogate Bid functionality. However, if I log on as a supplier contact person and try to create a Supplier RFx Response, I get error u201D A fatal error occured in the PD Layer. The transaction needs to be terminatedu201D.
Number ranges for Supplier RFx response (BUS2202) are maintained and assigned to the transaction type correctly.
What could be the problem?
Kind regards
Pedzi
Hi
Here is the thread which solved the same problem:
Re: A fatal error occured in the PD Layer during RFx response
with regards
Manjunath
Similar Messages
-
A fatal error occured in the PD Layer during RFx response
Dear Experts,
While creating the RFx response the error is,
"A fatal error occured in the PD Layer. The transaction needs to be terminated."
I just checked the earlier threads discussed on this forum says, this is due to non maintaining of number ranges , but i have maintained the no ranges for RFx response,
got stuck here, kindly help me to solve this issue.
ThanksSorry wrongly posted... the details are below.
The Rfx response no range 01 & 02 are matching with transaction type Supplier quote 01 & 02,
In Define Transaction type -- for Transaction category BUS2200 -- Transaction type RFQU -- the entries are
*Tran.cat Trns.type subsequent obj.type Follow up trns.type
*Bus2200 RFQU BUS2202 ECPO
The entries are correct or not???
Regards
Rakesh -
Fatal error occured in the PD layer srm 7.0
Hi,
While creating the RFx response i am getting following error.
"A fatal error occured in the PD Layer. The transaction needs to be terminated."
I tried as per following thread(number range is correct, i had full authorization), but still i am getting same error.
Any suggestion...Thanks in advance.
A fatal error occured in the PD Layer during RFx response
Thanks,
NarayanHi ,
Tell me the steps what you are performing in creating Rfx .
I am also working in the same scenario in SRM 7.0
This is a generalises error
Regards
G.Ganesh Kumar -
A fatal error occured in the PD Layer. The transaction needs to be terminat
Hi experts,
Do you know these error message?
A fatal error occured in the PD Layer. The transaction needs to be terminated
We applied note 1174283, but it didn't work.
The problem is related to users that don´t belong to SRM structure anymore, but their shopping carts are still in sourcing process.
Thanks
JulianaHi PM,
Note 1269719 - display a more detailled message in abort popup
Symptom
In some cases, the SRM application cannot continue and must be aborted.
Then a popup is displayed with an error message "A fatal error occured in
the PD layer. The transaction needs to be terminated.".
The error message is quite general, it is displayed even if a more specific
error message is available.
Note 1174283 - SOCO: SC data will not be saved correctly in secend step
Symptom
You saved some data in the second step of Sourcing Cockpit using the button
'Save'. You closed the application and started it again.
You selected data in the first step of SOCO or went directly to the second
step. The system display a message: "A fatal error occured in the PD layer.
The transaction needs to be terminated".
regards
Muthu -
Create RFx Response: An error occurred in the PD Layer transaction terminated
Hello Experts,
Currently we are in SRM 7.02 implemenation: we are facing below problem while creating RFx response with popup screen.
"An error occurred in the PD Layer transaction terminated"
For this we have checked below
1. http://scn.sap.com/thread/1912966 ----> it didn't help
2. We have assigned SAP_ALL role to bidder also ----> Facing same issue
3. Check Number ranges ---> everything is fine.
there is no clue from above points.
Thanks & Regards
Sandeep.Hello Sandeep,
I am facing the same problem while creating the RFx response in SUS side. Same error occurred while i am creating the Rfx response with bidder.
error: An error occurred in the PD Layer transaction terminated
Could you please let me know, did you find any solution for this issue?
Thanks in advance!!
Thanks,
Anil -
An error occurred in the PD layer; transaction terminated in SC
Hi experts,
I have an issue like this "An error occurred in the PD layer; transaction terminated". This error came when i save Shopping Cart.
Just for the information, I have maintained number range assignment for BUS2121 - Shopping Carts also.
And I am working on SRM 7.0
Do you have any idea to solve this issue?
Thanks,
Rhesa SyahrialHi Sam,
Thanks for your fast reply.
Below is the error analysis from st22.
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_BBP_PD_ABORT', was not caught and
therefore caused a runtime error.
The reason for the exception is:
Buffer table not up-to-date
I have checked in sapnote also about this issue. but still not resolved.
Regards,
Rhesa Syahrial -
REP-9: A fatal error occured: in the toolkit.
Ok, so I just installed a fresh install of Forms and Reports 11.1.2.0.0 and applied the most recent patch for it like I've been doing to the other servers in my environments. This one is the only one that gives me errors when I try to run a report. Here's what I'm looking at:
REP-9: A fatal error occured: in the toolkit.
UI-9: This function call is out of context.
REP-0002: Unable to retrieve a string from the Report Builder message file.
REP-0009:
oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
at..
I'd type out the rest but I can't paste in the new forum for some reason... Anyone seen this before?I think I may have found the problem. The path in my account profile was wrong... I'm going to re-install everything with the correct path and see if that helps.
-
Windows 8 RDP error security package error occurred in the transport layer.
We have an issue where in windows 7 this rdp works fine but windows 8 gives this error on all machines.
Your computer can't connect to the remote computer because a security package error occurred in the transport layer. Retry the connection or contact your network administrator for assistance.Hi,
Thanks for your post.
Please elaborate your scenario. Which OS version you trying to access? Windows Server 2012 or earlier version? Trying to access Session Host, RemoteApp or VM?
Please install latest Windows update on both side. Verify the port 3389 was not blocked by firewall, anti-virus or intermediate device. In addition, check the event viewer, to see if any related error was recorded.
Best Regards,
Aiden
If you have any feedback on our support, please click
here
Aiden Cao
TechNet Community Support -
Need help. I have my pilot lync 2013 pool up (in coexistence with 2010 production environment) and can log into Lync 2013 environment with a lync 2010 client but am not able to with a lync 2013 client. It just prompts for password but will not
take it. I'm sseeing this on my front end server multiple times:
A fatal error occurred while creating an SSL client credential. The internal error state is 10011.
Came across this http://www.logicspot.net/index.php?id=50 and tried disabling TLS 1.2, which I did and verified but yet the issue still exists.
All my certs are good coming from internal CA. My signin logs show below but keep in mind, this works just fine if using a 2010 lync client to my lync 2013 servers. Issue only occurs when trying to connect using a lync 2013 client.
1 Login: FAIL (hr = 0x1)
this request needs authentication, trying webticket from: https://domain.com/WebTicket/WebTicketService.svc
1.1 Get-NewWebTicket: FAIL (hr = 0x1)
CLogonCredentialManager::QueryForSpecificCreds() Credential user 0x069B64A0 id=15 querying for specific credentials, credSuccess=2, targetName=Microsoft_OC1:[email protected]:specific:LAD:1
1.1.1 ExecuteWithMetadataInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0A4FC348,
context: WebRequest context@ :173931816
MethodType:4
ExecutionComplete? :1
Callback@ :0A5A1864
AsyncHResult:80f10041
TargetUri:https://domain.com/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.2 ExecuteWithWindowsOrNoAuthInternal: PASS
1.1.3 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0A4FC348,
context: WebRequest context@ :173931816
MethodType:4
ExecutionComplete? :1
Callback@ :0A5A1864
AsyncHResult:80f10041
TargetUri:https://domain.com/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.4 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Discovery task(0A4FF830) sent to URL http://domain.com completed with hr=0x80f10045
1.1.5 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0A4FC348,
context: WebRequest context@ :173931816
MethodType:4
ExecutionComplete? :1
Callback@ :0A5A1864
AsyncHResult:80f10041
TargetUri:https://domain.com/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.6 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
CLogonCredentialManager::QueryForSpecificCreds() Credential user 0x069B64A0 id=15 querying for specific credentials, credSuccess=2, targetName=Microsoft_OC1:[email protected]:specific:LAD:1
RichHi,
Please check the server role and Web Services for Internet Information Services (IIS) are set correctly.
For the detailed IIS configuration, please check:
http://technet.microsoft.com/en-us/library/gg412871.aspx
As Lync client 2013 attempt to query in order to perform autodiscover of the Lync registration server. First
lyncdiscoverinternal.<sipdomain> Host (A) record and then
lyncdiscover.<sipdomain> Host (A) record. If neither of these records are resolvable then the legacy DNS SRV and A record fall-back process is used. So make sure you have add the two A record in DNS server.
More details:
http://blog.schertz.name/2012/12/lync-2013-client-autodiscover/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
Hi,
We are getting the following error when running our SSIS packages on Microsoft SQL Server 2012 R2 on Windows Server 2008 R2 SP1:
Error: 4014, Severity:20, State: 11. A fatal error occurred while reading the input stream from the network. The session will be terminated (input error: 109, output error: 0)
SQL Server Data Tools and SQL Server Database Engine reside on the same server.
We tried the following:
Disabling TCP Chimney Offload
Installed Windows Server 2008 SP1
Splitting our SSIS code into multiple steps so it is not all one large continuous operation
The error occurs during a BulkDataLoad task.
Other options we are investigating with the engineering team (out-sourced, so delayed responses):
Firewall configurations (everything is local, so this should not make a difference)
Disabling the anti-virus scanner
Are there other things we can try?
Any insight is greatly appreciated.
Thanks!Hi HenryKwan,
Based on the current information, the issue can be caused by many reasons. Please refer to the following tips:
Install the latest hotfix based on your SQL Server version. Ps: there is no SQL Server 2012 R2 version.
Change the MaxConcurrentExecutables property from -1 to another one based on the MAXDOP. For example, 8.
Set "RetainSameConnection" Property to FALSE on the all the connection managers.
Reference:
https://connect.microsoft.com/SQLServer/feedback/details/774370/ssis-packages-abort-with-unexpected-termination-message
If the issue is still existed, as Jakub suggested, please provide us more information about this issue.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
Sysprep - Fatal error occurred while trying to sysprep the machine
On the 4th attempt to sysprep a Windows 7 Enterprise system, I get the dreaded, 'A fatal error occurred while trying to sysprep the machine.'
The setuperr.log shows:
2010-08-04 13:57:58, Error [0x0f0073] SYSPRP RunExternalDlls:Not running DLLs; either the machine is in an invalid state or we couldn't update the recorded state, dwRet = 31
2010-08-04 13:57:58, Error [0x0f00ae] SYSPRP WinMain:Hit failure while processing sysprep cleanup external providers; hr = 0x8007001f
I've seen articles referring to the Windows Software Licensing Rearm program may have issues running more than three times in a single Windows image and to add <SkipRearm>1</SkipRearm> in the /unattend file... but this did not help.
The Windows Media Player Network Sharing Service has also been disabled which is often referred to in other posts.
The KB article: http://support.microsoft.com/kb/947212/en-us indicated that the resolution is to re-create the image for the machine... This is very frustrating. I'm hoping that there is
a better resolution???
How do you sysprep a machine more than three times to avoid this error?
Thanks!!
930193I had a problem Where Runing slmgr /dlv returned 0 and could not sysprep a
32 bit Win 7 Installed on C:drive
Here is what I did to succeed whit Sysprep.
Disable UAC
Based on
This :
open notepad and copy paste the following:
@ECHO OFF
setLocal Enabledelayedexpansion
for %%d in (c d e f g h i j k l m n o p q r s t u v w x y z) do (
if exist %%d:\windows\system32 (
SET drv1=%%d:\windows\system32
reg load HKLM\MY_SYSTEM !drv1!
reg delete HKLM\MY_SYSTEM\WPA /f
reg unload HKLM\MY_SYSTEM
GOTO END
:END
ECHO Done, Rebooting system...
timeout 3
wpeutil reboot
Then in notepad chose file>save as, in File Type select "All Files", name it "c:\reset.bat"
Reboot Your Pc, after bios screen press F8, Select "Repair Your Computer", select your keyboard layout, enter your credentials if needed,
then select the last option "Open Command Prompt"
type "c:\reset.bat" or "d:\reset.bat" (Sometimes Your Windows Partition get a different letter on the repair environment)
Back on Windows follow step five if needed.
Check under slmgr /dlv you have more than 0 under "Remaining Windows Rearm count"
Download pstools.zip from
here, extract content an copy psexec.exe to %windir%\System32
run psexec.exe and accept the license agreement so it won't bother when running afterwards, close it.
open notepad and copy paste the following:
@ECHO OFF
echo Stopping Windows Media Player Sharing Service..
echo.
net stop wmpnetworksvc
echo.
echo Deleting Old Sysprep Logs...
echo.
del /f /s /q %windir%\System32\sysprep\panther\*.*
echo.
echo Adding Required Sysprep Registry Keys...
echo.
REG ADD "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SoftwareProtectionPlatform" /v SkipRearm /t REG_DWORD /d 00000001 /f
REG ADD HKLM\SYSTEM\Setup\Status\SysprepStatus /v GeneralizationState /t REG_DWORD /d 00000007 /f
REG ADD HKLM\SYSTEM\Setup\Status\SysprepStatus /v CleanupState /t REG_DWORD /d 00000002 /f
psexec -i -s REG ADD HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\Sysprep\Cleanup /v "{EC9FE15D-99DD-4FB9-90D5-5B56E42A0F80}" /t REG_SZ /d "C:\\Windows\\System32\\iesysprep.dll,Sysprep_Cleanup_IE" /f
psexec -i -s REG ADD HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\Sysprep\Generalize /v "{EC9FE15D-99DD-4FB9-90D5-CE53C91AB9A1}" /t REG_SZ /d "C:\\Windows\\System32\\iesysprep.dll,Sysprep_Cleanup_IE" /f
psexec -i -s REG ADD HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\Sysprep\Specialize /v "{EC9FE15D-99DD-4FB9-90D5-676C338DC1DA}" /t REG_SZ /d "C:\\Windows\\System32\\iesysprep.dll,Sysprep_Cleanup_IE" /f
echo.
echo Uninstalling MSDTC...
echo.
msdtc -uninstall
timeout 10
echo.
echo Reinstalling MSDTC...
echo.
msdtc -install
timeout 10
echo.
echo Cross Your Fingers, Finally Running Sysprep...
echo.
%windir%\System32\sysprep\sysprep /generalize /oobe /shutdown /unattend:unattend.xml
Change Last Line to suit your needs, ie: if you are not using an unnattend answer file, then delete /unattend:unattend.xml"
Then in notepad chose file>save as, in File Type select "All Files", name it "%windir%\System32\do.cmd"
if you use an unattend.xml file copy it to %windir%\System32\sysprep folder.
Once you are ready run %windir%\System32\do.cmd
Hope it helps, -
Error 4014 Severity 16 State A fatal error occurred while reading the input streamfrom the network
We encounter following error intermittently Error 4014 Severity 20 State 16 , A fatal error occurred while reading the input stream from the network
I have checked the RING_BUFFER_CONNECTIVITY from sys.dm_os_ring_buffers, we are able to find the remote_host IP where connections are being closed/killed, the error being logged in sys.dm_os_ring_buffers, comes from multiple remote_host, we have raised
to O/s and Networking Team they seem to have no clue, why this error occurs
Server: Virtual Machine
Operating System: WINDOW 2008 R2 SP1
MSSQL 2008 STD ED SP3 10.0.5850.0
Database mirroring is configured for the application database.
Antivirus enable on the database server
How do we find the cause for this error being logged in SQL server logs, is this error due to SQL database mirroring or memory issue?
What needs to be checked on the O/s and Network, I have been checking on the internet and everywhere it is pointing to NIC drivers or security patches
Also in the system events following error was being logged, but after restarting the vm service this error has not re-occurred
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the VMTools service
Kindly suggest on Error 4014 Severity 20 State 16, A fatal error how to resolve
[email protected]Hello,
Could you try to use Network Monitor or WireShark to examine if the connections resets are coming from a client computer
or from the host where SQL Server is installed?
Network Monitor can be downloaded from the following link:
http://www.microsoft.com/en-us/download/details.aspx?id=4865
If you use Network Monitor trace you will identify connection resets by looking for “TCP: Flags=,,R.A” at the description column on the Frame Summary. Once you find the flag, the Source column will tell you the identity of the host resetting the connection,
maybe is not the SQL Server host.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Hi All
I am seeing the below event appearing in the system log on all our Exchange 2013 servers regularly. I am not seeing any connectivity issues between any clients and the servers and no other issues have been reported at this stage.
Log Name: System
Source: Schannel
Date: 10/04/2015 9:21:17 AM
Event ID: 36871
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer:
Description:
A fatal error occurred while creating an SSL client credential. The internal error state is 10013.
I am not sure if its related to the public certificate we are using or if its related to the one provided from the local CA.I have searched and found other links that suggest it could be related to SSL versions being disabled etc.
All servers are running Windows 2012 R2 Datacenter. The Exchange CAS servers do also sit behind a pair of F5 BIG IP Load Balancers
Any suggestions on where to look?
ThanksHi,
According to the event log, the issue is related to Schannel instead of Exchange.
Please try the following steps:
1.In Control Panel, click Administrative Tools, and then double-click Local Security Policy.
2.In Local Security Settings, expand Local Policies, and then click Security Options.
3.Under Policy in the right pane, double-click System cryptography: Use FIPS compliant algorithms for encryption, hashing, and signing, and then click Enabled.
4. Ran gpupdate /force
If it doesn’t work, please go to C:\ProgramData\Microsoft\Crypto\RSA and grant "Network Services" Read permission to "MachineKeys" folder. Then restart server to have a try.
Here is a similar thread for your reference:
https://social.technet.microsoft.com/Forums/lync/en-US/e70a8dbc-6f48-4fde-a93b-783554344822/a-fatal-error-occurred-when-attempting-to-access-the-ssl-client-credential-private-key?forum=ocscertificates
Regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Winnie Liang
TechNet Community Support -
"An RFC error occurred in the TMS communications layer.
Hi all,
We are running SAP ECC 6 in SUSE Linux. I am trying to configutre the STMS by keeping my Developement server as a domain controller. But when i login to my Production server and try to add the server in TMS its throwing an error message.
"An RFC error occurred in the TMS communications layer.
Target system: DOM_CTL.(000)
Function: TMS_CFG_CREATE_A2D_REQUEST
RFC message:Error opening an RFC connection.
System response
The function terminates."
Procedure
Correct the error and execute the command again.
Any help would be greatly appreciable
Regards,
PradeepHi,
When I have had problem's like this before I have deleted the complete TMS configuration, then made sure the TMS RFC connections are deleted then re-installed the TMS as if it was a fresh install, this usually fixed these communication issues.
I did however have a problem with the TMS configuration if the Password Parameters indicating there must be a digit is configured. I removed this parameter configured TMS then set this parameter again.
Regards
Krishna -
JMS-204: An error occurred in the AQ JNI layer
Approach 1) works fine but not 2).
Approach 1
=================
// Use the DriverManager to get the DB Connection
DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
java.sql.Connection dbConnection = DriverManager.getConnection("the url" , "the uid", "the pwd");
javax.jms.QueueConnection queueConnection = AQjmsQueueConnectionFactory.createQueueConnection( dbConnection );
Approach 2 (doesn't work)
=================
// Use the JNDI Lookup to get the DB Connection
Context ctx = get the context;
DataSource dataSource = (DataSource)ctx.lookup("datasoruce jndi");
dbConnection = dataSource.getConnection();
queueConnection = AQjmsQueueConnectionFactory.createQueueConnection( dbConnection );
Please note that I'm able to get the Queue Connection. But when I try to send the message, I get the exception.
Exception: JMS-204: An error occurred in the AQ JNI layer
Linked Exception: weblogic.rmi.extensions.RemoteRuntimeException: Unexpected Exception - with nested exception:
[java.rmi.MarshalException: failed to marshal setORAData(ILoracle.sql.ORAData;); nested exception is:
java.io.NotSerializableException: oracle.jms.AQjmsTextMessage_C]
App Server: WebLogic 8.1
Any thougts...
Thanks in advance.It is complaining about the AQjmsTextMessage not being serialized. I have seen errors with not using the actual oracle connection directly. Usually the datasource has some wrapper database connection. However, i would expect a different error. I will have to experiment with this.
Maybe you are looking for
-
SSRS - Expression to color column value dynamically in Matrix
Hi , I have a matrix which looks like : The <<Expr>> value can be 1 /0 /"-" . The Expr value is being calculated dynamically. The data set query I am using has a column called due_days. In the color expression of the <<Exp>> box I am using the expres
-
Scenario PROXY - SENDER FILE - RECEIVER FILE
Hi Experts, I need to create a synchronous scenario where the proxy sends the filename to send and PI must transfer the file to a location X. The source file is in a different location of the destination file This scenario, should this be done throu
-
my computer crashed and I am unable to receive my acrobat 10 I purchased online. what do I do to not have to pay for a new update?
-
Standard Report for maint order, PR,PO,services
Hi all, Is there any standard report in PM where i can find Maintenance order number,Purchase Requisition no., Purchase order no. and the services taken in the maint. order. If such a report is not there, pls tell me the logic to create it. Thanks Sa
-
Production issue with Smart Form
Hi , Issue is: Data getting poplutated in Dev system but not getting in Production system. we are using standard FM CRM_OUTPUT_SINGLE_READ which contains FM SSF_FIELD_LIST to which our smartform name is passed. FM SSF_FIELD_LIST returns all the globa