A Few Anomalies

After waiting a long time I was finally able to upgrade my iMac and install Aperture. For the most part I am pleased with A3 except for getting used to certain anomalies and instability issues encountered in this early version.
I have used iPhoto for as long as it has been out, but wanted more power to handle my growing image collection. I started taking digital pictures with a Kodak DC 120 camera (anyone interested in an antique?) so some of my older pictures are pretty low resolution, and I still shoot with an older Canon PowerShot. I say this because I believe it contributes to one of the anomalies I have run into in A3.
Magnification - on most of my photos I am able to magnify the image as expected, but on my older lower resolution images A3's magnify behaves strangely. For some reason A3's magnify tool will not work. In iPhoto the same image magnifies correctly. I called Apple about this but they were unable to explain it or help. The only suggestion made was that low res images may not be able to be magnified, however I can find no documentation of this.
*Red Eye Tool* - I struggled with getting this tool to work, but after much experimentation I discovered that the size of the cursor is the crucial factor. If the cursor is to small the red-eye effect tool will not work at all. Increasing the size of the cursor solves the problem. Even after discovering this, photos with red eye are poorly corrected in A3, while in iPhoto the correction is excellent.
*Inconsistent application of tool effects* - when using the adjustment tools I find that the way they are applied to the image is not consistent. Most of the tools show the immediate effect of the tool, except for the Red-eye tool and the Crop tool. With these two tools you have to exit the tool or click on some other tool to see the effect applied. This took some getting use to, because at first it appeared that the tools did not work. In iPhoto, these tools use an apply button so you do not have to exit the tool to see it applied.
*Strange interface* - I use keywords extensively, and love the keyword generator feature of nested keywords. This is very helpful in organizing keywords. What is a little strange is the clunky way one has to apply them. The drag and drop method is cumbersome. the buttons which you can display at the bottom of the window is much better, but groupings are limited to 20 buttons, so you end up using the drag and drop method. The search window for keywords lists all of your keywords in one huge alphabetical list and all organization you did in the keyword generator is lost. This seems very strange. Why use nesting of keywords if you can't see the nesting when you need to do a search? It also seems strange that when a nested keyword is applied its related keywords are ignored. For example if I create a nest as follows People>Extended Family>Grandfather Arvid>Bud's family, and apply the keyword _Bud's family_ to a photo, all the higher categories are ignored and only the keyword _Bud's family_ is applied. If I want the other keywords to also apply I have to shift click on the group and drag it over, again the advantage of nesting is lost. Seems like this good idea was not fully developed in A3
*Unexpected crashes, and lock-ups* - I have experienced several crashes of A3 when using tools or editing things like keywords. When this happens the notify Apple box appears and I send it to Apple with my comment, relaunch the program and continue to work. I never seem to loose data so that is a plus. I have also had a couple of lock-ups when the spinning wheel of death appears on the screen. This happened when the program was trying to update thumbnails. I keep the activity monitor open so I can see what is going on. I have had to force quit the program and relaunch.
It appears that A3 is in serious need of an update, but that is not unexpected with this being the 3.0 version. On the whole the program works very well and I am pleased with it. The program is very fast in its 64bit mode, even if, as I have read in this discussion, the iMac boots into 32bit. I am anxiously awaiting an update from Apple.

No version of DW will manage links that are embedded in
javascript - is that
what you mean?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Hendersonville" <[email protected]> wrote
in message
news:f0j0fp$nlp$[email protected]..
> There are a few anomalies with templates in Dreamweaver
Version 4 such as
> using DHTML addressing. Have these been fixed in Version
8?

Similar Messages

GRC EAM Authorizations: Few Anomalies in Standard Roles

Hi GRC/ Security Experts,
To brief you quickly, we have an SAP GRC AC 10 SP13 about to be deployed with ARA & EAM Modules as a first phase deployment.
All of the functionality is almost setup, just refining few things before going live.
About the GRC Authorizations, I observed few anomalies in the standard delivered SAP Roles for EAM.
I am aware that processes & compliance's, can vary from organization to organization. I am trying to redesign some of the EAM related authorizations, especially for Firefighter Owner/Controller.
In the standard delivered EAM roles, there are few things missing and few unnecessarily attached.
I am already aware of the provided information in the following resources:
- 1730649 - Firefighter owner can assign ANY Firefighter ID to Firefighter User
- 1663949 - EAM: Authorization Fixes for Central Owners and Reason Codes and have referred to EAM Authorization
- EAM Authorization Concepts & Guide
- GRC AC Latest Security Guide.
I am wondering, many of GRC AC 10 implementations must have gone live by now, and how can be the following authorization hardening concerns be addressed.
I observed the following anomalies, and used ST01 tracing to refine and address few of them still some of them I cant seem to get hold of:
1) [SOLVED] EAM Owners should technically not be allowed to Create/Maintain Reason Codes, that should be EAM Administrator's task. This was addressed by adjusting the auth objects from Owner's Role and only Reason Codes Display was provisioned to the owner's, hence this is addressed.
2) [SOLVED] EAM Owners should not be allowed to Create/Maintain EAM Controllers. This is a grey controversy I believe, as in my organization EAM Controller is treated on even Higher Scale than Owner and thus EAM Controller maintenance should only be done by the EAM admin rather than EAM Owner. This also I have addressed by adjusting few auth objects, which leaves the EAM Owners with Display only access of EAM Controllers.
3) [UNSOLVED] EAM Owner is able to assign any Firefighter ID to End-User: This is anomaly as per me, and is also specified in notes 1730649 & 1663949, but I find it hard to figure out the real solution of that specific issue. The notes just point to EAM Authorization Guide, which explain the GRC Authorization concept in general, which I of course get it. The GRC SP13 is already higher than the one applicable for the issue.
Technically EAM Owner should only be able ASSIGN the FF IDs that are Owned by him, this I cant seem to figure out how exactly.
I have gone through the Authorization Guide, Security Guide, Played too much with System Trace ST01 trying to redesign the authorizations. How would you have done it? This wasn't there in Virsa earlier, it used to bug you back saying that FF ID is not owned by you.
4) [UNSOLVED] Similarly like above, EAM Owner is able to modify assignments/delete assignments of any FF ID. This is of course cascaded from the above issue. I believe it doesn't has to be like this, EAM Owner should only be able to access/modify/maintain the FF IDs owned. Maintenance of the FF IDs not owned by EAM Owner should be truly abstained.
5) EAM Owners should not be able to Add/Delete the Assignments of Owner with FF ID. This is the starting point of the Firefighter Structure and must be restricted to EAM Administrator. In the Standard EAM Owner role, an EAM Owner can created another OWner, assign a FF ID to another Owner, Delete a Owner-FF ID assignment. EAM Owner should have display only access as far as it is concerned about the EAM Owners access Area. This one I have yet to test, which I think would be possible. Can't get hold of points 3 & 4.
I have already studied/implemented the suggestions/recommendations/corrections from Authorization Guide.
But i still feel that these are few loopholes and must be closed before I conclude the implementation.
What do you think?
Would truly appreciate, if you can point out the objects and values that can help to address the open issues.
Apologies, for such a lengthy post, but the authorization goes deep here I guess and ST01 isn't helping me anymore to get over this.
Regards,
Akshay

Hi Colleen,
Thanks for your reply, I was sure I will be getting first response from you, as you are really proactive in GRC Space.
W.r.t. your suggestions:
1) I am not able to follow what you mean by "Are you able to try debugging "CALL METHOD cl_grac_auth_engine=>authority_check" ?? I am not much of a ABAPper/DEBUGGer, but if you can point what exactly is to be done/or to be get done I wouldn't mind getting my hands dirty at this too.
Correct me if I am wrong, do you imply that, even though the specified correction in note is available in system (SP13), still this inbuilt authority check is not happening and is being bypassed?
2) I checked the EAM Authorization Guide for Auth Object GRAC_USER.
With what you feel in the below message of yours=>
Starting to wonder if it is as the EAM Guide attached to the above notes mentions authorisation GRAC_USER which contains a field for user (quote from guide below).
User ID : This Field Specifies which firefighter users you can Display and Perform other activities based on the Activity Field .
That suggests you need different roles to restrict owners? I would have thought SAP would differentiate between authorisation to maintain FF as and Administrator versus Owner allow access to their Ids.
I would have thought Administrator would get the GRAC* authorisations whilst Owners would obtain access via owner setup (mapping for FF Id)
I went back to the EAM Guide and tried to put it all together to make sense.
With my below observations, I think too that there is no such thing as mapping of FF ID with the Owner, out of the Box in GRC AC 10 so that Owner is able to access only the FF IDs owned.
So, if that would be true, then to achieve this sort of wish, I would have to have separate roles from each EAM Owner specifying, the FF IDs that particular EAM Owner is able to access. And then there would be n number of Roles for n number of Owners, which is subject to change and has to be maintained again. Then also, the FF ID owned could also be added/removed etc, Whoa! That wouldn't make me far away from rationalizing the whole objective.
I just wonder, if this is actually Ok? If there is no approach to this, would it be OK to let any EAM Owner work with any FF ID subject to their own desire.
Anyways, check this out below , I will sideways open a message with SAP just to have my closure.
From EAM Authorizations Guide in the note=>
Now from the EAM Owner's Role=>
This no where mentions of Restricting the FF IDs in the Role, if at all this concept exists, it would be through some internal check like the one above i.e. CALL METHOD cl_grac_auth_engine=>authority_check or something.
Also, found these few specifications as well, which affirms the same I believe.
Much thanks for your effort and patience.
Regards,
Akshay

Does MacBook come with rosetta?

Hi tomorrow I am going into the City to buy my MacBook and I was wondering does the MacbBook come with rosetta?
From what ive heard it's inbuilt into the OS but I just thought id double check.
And I was wondering will Rosetta let me run Macromedia Flash and adobe photoshop 7.0 ??

If an application is written only for PowerPC, it will automatically open and run with Rosetta. You needn't make any changes.
There are a few anomalies that programs have hit under Rosetta, but they are few.
Here's a compatibility list, with problems and workarounds:
http://www.macfixit.com/article.php?story=20060403083100142&query=rosetta+compat ibility

Looping a video track with escape -- Bug or Pilot error?

[The next 2 paragraphs are a repeat of my previous post. I'm including them for context.]
I'm working in DVDSP 4 and have encountered a few "anomalies". I wanted to see if I am doing something wrong or if I have found a bug. I will break this into two posts because they are two different issues.
Basically I am creating a DVD that will back a live presentation. The video track is timed to approximate the length of the presentation. But I want to have several "escape hatches". If a segment does run a little long then the presentation will dump into another track that has a still image and a background music track. I don't want to pause the play, because I want full-field video and audio. I also want to advance through the presentation by simply clicking the NEXT CHAPTER button.
[/End repeated section]
So the other problem with looping a still on a video track is escaping the loop. I've set this track's END JUMP to go to the "Chapter 1" marker of the current video program. (It's the only marker on the this timeline.) I've targeted the "Next Chapter" button to return me to my main timeline. Whether I simulate OR burn this DVD program I get the same results. The playhead does not jump tracks. Instead it returns to the start of the current timeline and begins playing again.
Is this supposed to happen? DVDSP lets me assign all these actions, and the manual and support seems to indicate this should work, but it doesn't. Not sure if this is a bug, a problem with the DVD spec, or simply my lack of knowledge. (please help)

Houghts & Aldershot -- thanks for your reply. To add a little clarity the project goes like this:
The MAIN track is 20 minutes long. If the speaker finishes a section early, he can "NEXT" to the next section (next marker). If he runs long, when he gets to the next marker the dvd will dump him into another track (Lets call it WAITING TRACK) that will "hold" (with some music) until he hits NEXT again. So far this all works.
The problem is getting OUT of the WAITING TRACK loop and back to the MAIN track. Putting a second marker near the end of this track (as Aldershot suggests) will jump me to the end of WAITING but how do I get back to the marker in MAIN? Can I just set an end Jump to go back to the marker I want in MAIN? Will the presenter then have to hit skip forward twice? (I guess I'll have to try and see.)
I guess I could target this marker in main with the MENU button, but then the presenter would have TWO buttons to worry about. I'm trying to make this as zipless as possible.
By the way, if I don't loop the WAITING track back to the first marker, this scenario works. The problem only arises if I loop back to Chapter1. Making the end of the track an infinite hold looked to be a promising option. But it seems to put the player into pause. The user must hit PLAY and then NEXT. Two buttons again.
I'll keep digging and follow up as I learn more.

Problems with a VBA Userform using Multipage (2) and DTPicker.

Hi
Problems with a VBA Userform using Multipage (2) and DTPicker (4)
On Page1 I've got 2 DTPicker, one for the date and the second for the time.
Same thing on Page 2.
Problem:
Only one set will work, if I close the Userform with" MultiPage"on page2, only that set will work.
Same thing if I close on Page 1 then just the set on Page 1 will work.
As anyone seen this problem and any work around you may think would help.
I'm using Windows 7 , Ms Office Pro. 2003
same problem on Windows Vista , XL2003
Cimjet

There are a number of issues relating to the way that date pickers are handled, but the most important is that their output is text. In order to get the values into Excel, you need to format the Excel columns as Date and Custom (time format) and convert
the output to the worksheet from text to date values.
Date pickers also display a few anomalies on multi-page forms, so you need a belt and braces approach. Personally I would put the code to call the form and enter the values in a standard module (as now in the example) and use a belt and braces approach to
maintaining the format.
I think you will find the example now works.
Revised Example
Graham Mayor - Word MVP
www.gmayor.com

Cant Seem To Solve Laggy Macbook After Yosemite Update

Hi guys. New poster on here, but thought I would reach out to you to see if you guys have some input on my issue.
First the specs:
I have a:
Early 2011 15" Macbook Pro
Intel Core i7 / 2 GHz
New OWC 500GB SSD
New OWC 16GB Memory
I have been having the system run really really slow since I upgraded to Yosemite and on Monday after converting some GOPRO footage over to Apple Pro Res the system just seemed to be crawling. I did a Verify Disk without issues as well as Verify Permissions and no issues on that as well.
I keep all my personal files on a 1TB external firewire HD so I figured yesterday that I would do a reformat and clean install of Yosemite on my internal SSD. The install went fine without issues, yet the problem now is just as bad. I then ran the disk utility and there where a couple of permission errors and fixed that yet still no fix. Then last night I ran the Apple Hardware test and it came back that I had a bad battery. After some Google searches it seems like Apple downclocks the speed if the system thinks there is no battery, but would it really slow it down this much?
I order a new battery today for OWC and should have it tomorrow morning, but the weird part is I have know my battery to be bad for at least that last month or two as about a month and I half ago I noticed if I took the power cable off the computer would shut off instantly, and then turn back on instantly when reconnecting the power.
Do you guys think this is all battery related or am I missing something else?

Dana
I am neither a MBPro nor Yosemite user, but I knew there was a dearth of info for those who are. As new a Yosemite is, there seems to be quite a few anomalies - your situation provides an example that illustrates "good to go on one Mac and not-so-good on another"
You may be able to check some things for yourself while you wait for the cavalry to come...
On the GoodMacContact, look carefully at the misbehaving BadMacContact info.
On the BadMacContact, make it have exactly ALL the same attributes/settings as GoodMacContact.
give it try if you make any changes - else, DELETE BadMacContact and Create a New Contact using the GoodMacContact as a guide for all attributes - give that one a try.
Wait a bit for the cavalry if no joy - a reply will notify me and move your thread up in the list for folks who may be visiting later on. If no answer (after no joy) after a while, we may ask our gracious Hosts to transfer this to the Yosemite forum - that one seems very active
hang in there
ÇÇÇ

Dreamweaver freezes whendownloading a page for editing.

When I try to download a pagein DW for editing from my website, DW will not display the page. It indicates that all the essential files are downloading, but when it get to the place where I would expect to get a display of the page in design view, it just spins. The only thing I can do then is force close the program. Help! The website is www.enonumc.com

Hi Dennis -
I notice a few anomalies in your code which may be relevant.
In several places you have links to targets which are one level above the root folder on your server.
(wherever the link path starts with ../ )
Most hosts will not allow access to folders and files above the server root, so perhaps your FTP transfer is stalling DW in the attempt to access these files
For instance on your home page:
<link rel="stylesheet" href="../enonumc.css" type="text/css" />
<script src="../Scripts/AC_RunActiveContent.js" type="text/javascript"></script>
<script type="text/javascript">

</script>

Preview Window Not Working

Problem:
The preview window in the top right of iMovie 08 does not work. It is either checkered or black.
Possible Solution:
If your iMovie project is using video from an event that has a lot of video in it, split that event up. Do this via right click->Split Event Before Click.
Background:
When I would start up iMovie '08 (7.1.4) everything worked fine until I clicked on a certain project that I had made. Then the preview window would not work--it showed a blank screen or was checkered, even though the audio would play. Weird things would continue to happen, and none of the other projects would play in the preview window, it seemed to get progressively worse.
The project used video from an even that had a lot more video in it than other events I was using. It had 45:45 and the others less than 30min. I split the event up half way via right-clicking about half way and then selecting "Split Event Before Clip". This split the event into two events, and everything works fine now. (When you split the event, you need not worry about messing up your project, it knows that you have split the event and can still find the video.)

Well, I just seemed to have solved the problem...at least as I was experiencing it. As mentioned, I have my Motion content on an external drive, so I decided to revisit this.
I had installed all my Final Cut Studio content on the external drive using the "Content Installer" (after first installing the apps to my laptop). When opening Motion for the first time, it couldn't find the content so I manually typed in the appropriate path...or so I thought:
250GB Drive : Final Cut Studio Content : Motion Content.
Oddly enough, a few things worked this way, but not everything. It turns out I had to specifically point one folder deeper:
250GB Drive : Final Cut Studio Content : Motion Content : Motion
After doing this, all my content seems to preview, although there still are a few anomalies. Some things have to be clicked on more than once to preview, or sometimes I must preview something else first, then try the desired effect a second time. In some cases waiting quite a while produces something.
I'll try moving the cursor about as Mabou suggested and see if that makes any difference.
At least I'm getting somewhere!
Thanks,
Doug

Query performance after patch upgrade

Hi All,
We were earlier on SP17 and then upgraded recently to SP23. It was after this that we started noticing few anomalies. This includes really long runtime to run queries (more than 2 hours). This earlier (before upgrade) used to run in hardly 2 mins for the same selection criteria. This happens with majority of queries.
Let me elaborate this a little further. I have a very important sales query which is being used by many endusers all across India. This query has the following parameters as the selection screen. -
a) Division (mandatory)
b) Plant (mandatory)
c) Sales Office (mandatory)
d) Material (optional)
e) Fiscal year period range : <Starting Fiscal period> to <Ending Fiscal Period> (Mandatory)
Usually this report is run for 4 & 5 series materials. Hence normally users enter the following criteria while running this query-
Division - 03
Plant - L501
Sales Office - L003
Material - 400000 to 599999
Fiscal Year period range : YTD Range.
To run this report it takes more than 2 hours. Now say for instance this report is run and it brings in 50 materials. I export the list of these 50 materials and then run the same query again for the same criteria except this time, I execute the report not for material range of 4 & 5 Series but only for these 50 materials specifically. This then takes 2 Mins.
The problem is that we cannot expect all the users to do this. Has anybody faced this issue earlier. I request assistance in resolving this problem.
Regards,
Sree

One further observation.
When the report is not executed for any material (i.e. the material values are kept blank in the selection screen itself), then the report runs in like 2 mins again (the other parameters are kept the same as mentioned in the above message).
Can anyone put some light into this.
Regards,
Sree

Need advice about text formatting and hyperlinking

Hi folks,
Thanks for reading my post. I am new at this and am using
Dreamweaver 6.0 for our website. We are putting together a
substantial directory on our site and were wondering if there was
any way for us to:
1. Not have to enter each hyperlink address into deamweaver
and have the software automatically recognize the link and point to
the site; and
2. Find the most efficient way to highlight a string of text
quickly
here is an example of one of our many listings in the
directory:
Alleghany County Community Foundation
4601 Six Forks Road
Suite 524
Raleigh, NC 27609
800-201-9533
http://www.nccommunityfoundation.org/
Every foundation has their own grant awarding guidelines.
Please get in touch with The Alleghany County Community Foundation
to see if you or your business is eligible for a grant.
Any advice would be greatly appreciated. Thanks all.
Vivek

> Dreamweaver 6.0
Please run as fast as you can to the Adobe downloads page and
get the
updater for DW6.0 -> DW6.1. There were quite a few
anomalies that can catch
up with you unexpectedly in that first release version.
> 1. Not have to enter each hyperlink address into
deamweaver and have the
> software automatically recognize the link and point to
the site; and
> 2. Find the most efficient way to highlight a string of
text quickly
I'm not quite sure what you are asking here. As already
suggested, it
sounds like you need to have your link information in a
database, which is
then placed on the page but maybe not.
And 'highlight' a string of text quickly? Sorry - I don't
understand what
you are looking for....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"vlakhiani" <[email protected]> wrote in
message
news:[email protected]...
> Hi folks,
>
> Thanks for reading my post. I am new at this and am
using Dreamweaver 6.0
> for
> our website. We are putting together a substantial
directory on our site
> and
> were wondering if there was any way for us to:
>
> 1. Not have to enter each hyperlink address into
deamweaver and have the
> software automatically recognize the link and point to
the site; and
> 2. Find the most efficient way to highlight a string of
text quickly
>
> here is an example of one of our many listings in the
directory:
>
> Alleghany County Community Foundation
> 4601 Six Forks Road
> Suite 524
> Raleigh, NC 27609
> 800-201-9533
>
http://www.nccommunityfoundation.org/
> Every foundation has their own grant awarding
guidelines. Please get in
> touch
> with The Alleghany County Community Foundation to see if
you or your
> business
> is eligible for a grant.
>
> Any advice would be greatly appreciated. Thanks all.
>
> Vivek
>
>

3B2 to InDesign Conversion

I have a 3B2 document with me. I need to convert the 3B2 document to InDesign. Can someone help me out to convert the document or is there any tool available on the website?

Hi John,
I've been using 3B2 for more years than I care to remember. I still use it for a certain Journal. I switched to InDesign a few years back since 3B2 was no longer supported and the worry of hardware dongle issues. A real pity because it is a very powerful program and, as I recall, hugely expensive!
Unfortunately, there is no export option, however, 3B2 is an ASCII based program using visible tags and simply cutting and pasting from the ASCII (right hand screen), into an InDesign document works well. Then use Find and Replace on those tags (<body>, <heading> and any inline tags &I; &R; etc.) to your InDesign tags. There are a very few anomalies which, off the top of my head, I can't remember.
I'm very rarely on this forum, your query was forwarded by a friend. If you need any further assistance please feel free to email me at [email protected]
All the best and good luck.
John.

MyPassport won't backup iPhoto Library

How do I get a WD MyPassport Essential to backup my iPhoto Library? I have over 13,000 photos and the drive is 500GB. It sees documents but not the photo library. Pls Help.

Michael
There are few anomalies turning up with iPhoto libraries on NAS shares.
See here: http://discussions.apple.com/thread.jspa?threadID=1100543&tstart=0
here: http://discussions.apple.com/thread.jspa?messageID=5326685&#5326685
here: http://discussions.apple.com/thread.jspa?messageID=5235933&#5235933
Some of those solutions may work.
Be sure to let Apple know of your issue: iPhoto menu -> Provide iPhoto Feedback
Regards
TD

IPhoto won't select iPhoto Library

I upgraded to the newest iPhoto. No problems. My iPhoto Library is very big, about 50 gigs, so I keep it on a NAS. I opened iPhoto once, and it wouldn't open my iPhoto library because my NAS share wasn't mounted. OK, so I quit iPhoto, mounted the network share, and then opened it again. It didn't see my iPhoto Library so I opened it while holding the option key, and went to manually select my library. However, the library is greyed out. It won't let me select it.
How could this of happened? How can I get my photos back and get iPhoto to see the library it had been using for weeks before?

Michael
There are few anomalies turning up with iPhoto libraries on NAS shares.
See here: http://discussions.apple.com/thread.jspa?threadID=1100543&tstart=0
here: http://discussions.apple.com/thread.jspa?messageID=5326685&#5326685
here: http://discussions.apple.com/thread.jspa?messageID=5235933&#5235933
Some of those solutions may work.
Be sure to let Apple know of your issue: iPhoto menu -> Provide iPhoto Feedback
Regards
TD

Preview Window In Inspector Not Visible

I was working on a Keynote presentation today and noticed that the preview window that is supposed to appear in my Inspector is not available to view - but only under the "Build Inspector" tab - I was able to see a preview in the "Slide Inspector" tab, and wonder if this is something that I accidentally disabled/turned off, or if this is a glitch in the software...? Any ideas?

Well, I just seemed to have solved the problem...at least as I was experiencing it. As mentioned, I have my Motion content on an external drive, so I decided to revisit this.
I had installed all my Final Cut Studio content on the external drive using the "Content Installer" (after first installing the apps to my laptop). When opening Motion for the first time, it couldn't find the content so I manually typed in the appropriate path...or so I thought:
250GB Drive : Final Cut Studio Content : Motion Content.
Oddly enough, a few things worked this way, but not everything. It turns out I had to specifically point one folder deeper:
250GB Drive : Final Cut Studio Content : Motion Content : Motion
After doing this, all my content seems to preview, although there still are a few anomalies. Some things have to be clicked on more than once to preview, or sometimes I must preview something else first, then try the desired effect a second time. In some cases waiting quite a while produces something.
I'll try moving the cursor about as Mabou suggested and see if that makes any difference.
At least I'm getting somewhere!
Thanks,
Doug

Can't print from my macbook pro to my lexmark x4650 wireless lion

i can print when connected to it via usb but i cant wirelessly
im using a mid 2009 macbook pro

Dana
I am neither a MBPro nor Yosemite user, but I knew there was a dearth of info for those who are. As new a Yosemite is, there seems to be quite a few anomalies - your situation provides an example that illustrates "good to go on one Mac and not-so-good on another"
You may be able to check some things for yourself while you wait for the cavalry to come...
On the GoodMacContact, look carefully at the misbehaving BadMacContact info.
On the BadMacContact, make it have exactly ALL the same attributes/settings as GoodMacContact.
give it try if you make any changes - else, DELETE BadMacContact and Create a New Contact using the GoodMacContact as a guide for all attributes - give that one a try.
Wait a bit for the cavalry if no joy - a reply will notify me and move your thread up in the list for folks who may be visiting later on. If no answer (after no joy) after a while, we may ask our gracious Hosts to transfer this to the Yosemite forum - that one seems very active
hang in there
ÇÇÇ

A Few Anomalies

Similar Messages

Maybe you are looking for