A few good questions. I can handle the truth.

I'm afraid the more I read the more I get confused so I would like to ask a few streamlined questions:
1. I want to create a single form to be used only by four Quality Control supervisors to monitor our 120 employees on a continual basis.
2. I want to gather the data results automatically that upper management can view.
It seems from my reading so far that a webform is the best way to do that.I have experimented with a few forms but what I'm finding most confusing is the distribution and how it is hosted. Can a user save the file sent via email and use it multiple times? Would it be better to host on an intranet? Lastly, I purchased Acrobat Pro XI with the understanding that Forums Central was part of the subscription but I was not able to effectively do what I have done so far without trying the $0.99 trial upgrade. Do I need this upgrade for my intended use?
Thanks!!!

Hi ou812jb,
Thoughts and answers in roughly the order you asked...
No matter which way you distribute your form, as a PDF or as an online form, you have limited control over limiting access. If it is a PDF, you can e-mail that to those four supervisors... but if they forward, copy, or otherwise distribute the form to others, then you may get more people with access to the form than you had intended. Likewise, with the web-based form: you can send the URL to the four supervisors, but if they share that URL with other people...
Your form will gather the data, and even provide simple analytics on the results, for you and/or upper management to view.
Without knowing more about the types of questions you want to ask, it's hard to say which way would be better - PDF or online. Unless you need a specific, exact layout, that also needs to be printed, then a web form is perhaps easier. The distribution and data are hosted by Adobe's servers and site... there is no local hosting option.
If using the web form, the supervisor would simply go to the URL of the form and fill in a new form. If it is a PDF form, the supervisor would open a new copy of the PDF, fill it out, and then click the Submit button on the PDF, thus sending the data to Adobe's servers.
The FormsCentral application is included in the Acrobat Pro XI box, but that doesn't include any of the actual service... just an application. Though if you have Flash installed on your computer, you can do all of the design work inside a web browser instead. Yes, I would spend the $0.99 to get acclimated to the product. If you're at all like me, you'll then see dozens of ways to use it beyond what you had originally anticipated.
I hope this helps,
Brian

Similar Messages

My tel Goes after 10 minutes offline, apears à enige Apple, and i have to unlock again. People are not able to call me while THE Apple apears. Question what can be THE solution ?? It is à 3GS tel iOS 4.2.1

My tel Goes after 10 minutes offline, apears à enige Apple, and i have to unlock again. People are not able to call me while THE Apple apears. Question what can be THE solution ?? It is à 3GS tel iOS 4.2.1

Hi Richard,
You mentioned that 'Apple put the AirPrint spec out there for all printer makers'. I've been looking around but I haven't found any spec. Where did you find it?
Do printer makers have to buy a license in order to be able to advertise that they've implemented the AirPrint protocol? Is there maybe an Apple review process in place?
TIA
Geert

My tel Goes after 10 minutes offline, apears à white Apple, and i have to unlock again. People are not able to call me while THE Apple apears. Question what can be THE solution ?? It is à 3GS tel iOS 4.2.1

My tel Goes after 10 minutes offline, apears à white Apple, and i have to unlock again. People are not able to call me while THE Apple apears. Question what can be THE solution ?? It is à 3GS tel iOS 4.2.1

Hi Richard,
You mentioned that 'Apple put the AirPrint spec out there for all printer makers'. I've been looking around but I haven't found any spec. Where did you find it?
Do printer makers have to buy a license in order to be able to advertise that they've implemented the AirPrint protocol? Is there maybe an Apple review process in place?
TIA
Geert

[SOLVED] "No codec present that can handle the stream's type" issue

Hello. I got a python program that would play musics on a website, which doesn't work for a "no codec present that can handle the stream's type" issue. I have installed things like gstreamer, gstreamer-plugins, gstreamer-python, gstreamer-ffmpeg, and libmpeg2, etc. However, this issue still remains. Would someone here be able to help?
Here's the error message:
** Message: don't know how to handle audio/mpeg, mpegversion=(int)1, mpegaudioversion=(int)2, layer=(int)3, rate=(int)24000, channels=(int)2, parsed=(boolean)true
Error: There is no codec present that can handle the stream's type. gstplaybasebin.c(2322): prepare_output (): /GstPlayBin:player
Here's the program, written by a Chinese: https://github.com/zhendi/DoubanFM-CLI
Edit:
I'm able to play the musics on the websites via chromium.
Edit:
I tried to download the music, and use gst-launch-0.10 filesrc location=~/p535960.mp3 ! decodebin ! autovideosink, but only find these messages:
Setting pipeline to PAUSED ...
Pipeline is PREROLLING ...
ERROR: from element /GstPipeline:pipeline0/GstDecodeBin:decodebin0/GstMpegAudioParse:mpegaudioparse0: GStreamer encountered a general stream error.
Additional debug info:
gstbaseparse.c(2695): gst_base_parse_loop (): /GstPipeline:pipeline0/GstDecodeBin:decodebin0/GstMpegAudioParse:mpegaudioparse0:
streaming stopped, reason not-linked
ERROR: pipeline doesn't want to preroll.
Setting pipeline to NULL ...
Freeing pipeline ...
Last edited by lastland (2012-02-18 07:47:47)

Sorry. I just found the reason. I missed gstreamer-ugly in this case.

HELLO I WOULD LIKE TO BUY IPHONE 5 FROM THE OFFICIAL SITE OF APPLE BECAUSE IS CHEAPER FROM MY COUNTRY GREECE. MY QUESTION IS CAN SUPPORT THE GREEK MENU OR LANGUAGE? THANKS

HELLO I WOULD LIKE TO BUY IPHONE 5 FROM THE OFFICIAL SITE OF APPLE BECAUSE IS CHEAPER FROM MY COUNTRY GREECE. MY QUESTION IS CAN SUPPORT THE GREEK MENU OR LANGUAGE? THANKS

To find out what languages are supported, just read for yourself the tech specs:
http://www.apple.com/iphone/specs.html
To find out if you can buy something you have to contact the store yourself. The US Apple store does not sell to other countries.

HT5312 I for got for got the answers of my security questions, how can restart the questions answers of my security questions, how can restart the questions?

I for got the answers of my security questions, how can restart the security questions?

If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then you can try going to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you might see an option to send security question reset info to your rescue email address.
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then see if this user tip helps : https://discussions.apple.com/docs/DOC-4551
e.g. you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then try Apple ID Account Security
or try ringing Apple in your country and ask to talk to the Accounts Security Team : http://support.apple.com/kb/HE57

WL-JAAS-No Configuration was registered that can handle the configuration

Hi,
A) I am trying to run JAAS on Weblogic. We have got our own login module developed based on JAAS specification.
I have created jas.config which is as follows:
abcjaas {
<pkg>.DBLoginModule required
which I have included in the system properties as
set JAVA_OPTIONS=%JAVA_OPTIONS% -Djava.security.auth.login.config=D:\BeaWL\jaas.config
B) I had also tried setting this
set JAVA_OPTIONS=%JAVA_OPTIONS% -Dlogin.configuration.provider=com.bea.common.security.jdkutils.JAASConfiguration. This I have also tried configuring in the java.security file in the JDK folder.
While in Java code, it precisly throws error here on this statement:
loginContext = new LoginContext("abcjaas", callHandler);
But for all the above trials, it gives the same error as follows:
C)
Inside : Authenticator ::authenticateUser()....
<Sep 10, 2009 2:32:49 PM IST> <Error> <HTTP> <BEA-101020> <[weblogic.servlet.internal.WebAppServletContext@609547 - appName: CommercialLines_EAR', name: 'App', context-path: '/App', spec-version: '2.5'] Servlet failed with Exception
java.lang.IllegalArgumentException: No Configuration was registered that can handle the configuration named abcjaas
at com.bea.common.security.jdkutils.JAASConfiguration.getAppConfigurationEntry(JAASConfiguration.java:124)
at javax.security.auth.login.LoginContext.init(LoginContext.java:243)
at javax.security.auth.login.LoginContext.<init>(LoginContext.java:403)
at <pkg>.Authenticator.authenticateUser(Authenticator.java:38)
at <pkg>.LoginFilter.doFilter(LoginFilter.java:40)
Truncated. see log file for complete stacktrace
>
D) Kindly help, the Weblogic 10.3.0.0 running on JDK1.6 -Sun provided. I am not using the JDK1.6 in WL10.3 or its Jrockit1.6.
Please let me know the resolution.
Cheers,
-Vishal Kumar

I came across the potential fix through the document: http://docs.oracle.com/cd/E23717_01/doc.71/e23699/adm_troubleshoot.htm#BABIHJJF . The fix works fine.
However I would like a better explanation of the issue and the fix. The issue happens only on Solaris servers that run sftp, but not on linux servers.

How we can handle the below doubt in Java Script!!

Hi All,
I need to handle the below scenerio in javascript, i am very poor in scripting langauage could any help me out.
Below are the three where we have specail character
words as
1. transfer (…)
2. Shell’s
3. Vitol – as
The above 3 are having some specail characters which we need to
replace as mentioned below
need to use a Function/Method in some scripting language like Java
script to replace the special character with a predefined sequence eg:
single quote with “a1b1” before inserting the data in to the data base
and then while retrieving the record from the database replace “a1b1”
with single quote.
Note#:It is a text area where user can either enter or copy and paste
the content.
Thanks,
Anoo..

Hi Anoo,
always remember to put your apex and database versions, it makes it easier to help.
You mentioned stripping out special characters and then putting them back for display. Is there a particular reason why?
If you're having difficulty querying the 'special' characters from SQL, you can create a view to handle that complexity.
The examples you gave don't contain any characters you can't query on. Maybe I'm missing something.
Kofi

A Few iPhone Questions I Can't Find Answers to...

Hi. I'm super interested in getting the iPhone. Here are some questions I'd love to get answered in order to get closer to obtaining the iPhone:
1. How much are the initial costs, mainly concerned about the activation fee? - After reading the fine print I see $36, but is this correct?
2. Can I see all my ATT Minutes & Text Usages on iTunes so I can be up to date on how close I am to going over?
3. With Rollover, can my minutes just accumulate over and over? I believe I heard something about rollover minutes capping up to my monthly minutes, say 900.
(I'm interested in the $79.99 /month plan)
4. Unlimited Mobile to Mobile is the whole ATT network, correct?
5. Finally, if you have an iPhone, how's the phone bill? :]
6. Finally x2, are you happy/satisfied with the iPhone, why?
Thanks alot, these answers will definately influence my decision on getting an iPhone. Thanks.

1. How much are the initial costs, mainly concerned about the activation fee? - After reading the fine print I see $36, but is this correct?
This sounds correct but whatever is provided at AT&T's website.
2. Can I see all my ATT Minutes & Text Usages on iTunes so I can be up to date on how close I am to going over?
Not with iTunes but the iPhone includes the following options under the AT&T Services selection:
Check Bill Balance
Directory Assistance
Pay My Bill
View My Minutes
Voice Connect (which requires an additional fee)
AT&T MyAccount - which takes you to AT&T's website with Safari on the iPhone to log in to your account which includes all this detailed information.
3. With Rollover, can my minutes just accumulate over and over? I believe I heard something about rollover minutes capping up to my monthly minutes, say 900.
The cap per month is your anytime minutes package. If you choose the 450 anytime minutes plan and don't use any of your anytime or billable minutes, 450 anytime minutes will rollover to the next month giving you 900 anytime minutes the next month which continues to accumulate for the anytime minutes not used each month. There is a 12 month limit so if I have 100 anytime rollover minutes this month which is not used by December next year, these rollover minutes are lost.
4. Unlimited Mobile to Mobile is the whole ATT network, correct?
Correct - you have unlimited mobile to mobile minutes at any time of the day with fellow AT&T subscribers. These minutes are free and do not count against your chosen anytime minutes plan.
5. Finally, if you have an iPhone, how's the phone bill? :]
Not sure what type of answer you are looking for with this question.
6. Finally x2, are you happy/satisfied with the iPhone, why?
I'm very happy and satisfied. This is the first phone I've used that syncs with my Mac's Address Book contacts and iCal calendar events without needing to jump through hoops with work arounds that didn't work completely or reliably. It is a phone, an iPod and an internet device. As long as you have cell phone reception, you have an always on internet access for email account access and web browsing. In the past when I traveled, I carried my PowerBook, my iPod and my cell phone. Unless I need to do work, I now carry my iPhone which combines these three and it fits in my shirt pocket.
I also use my cell phone in place of a landline so it has been great for me. I don't go anywhere without it and I also use the iPhone's alarm feature for my alarm clock.

PDF Portfolios - A few Good Questions...

Lori Defurio (Acrobat's Product Manager)
http://blogs.adobe.com/loridefurio/about.html
has created a great PDF (acrobat9features.pdf) that shows what
Acrobat Portfolio can do. However, I don't know how she put an
animation in the Welcome Header. Also, is there and easier way to
get that Carousel (as oppossed to Revolve) to work. I saw a video
on https://admin.adobe.acrobat.com/_a295153/a9asp3/ and it looks
like there is lots of coding Custom PDF Portfolio Navigator. For
instance is anyone sharing/selling this Carosel? Its cool and I
want it but won't be able to excecute the code/script heavy (for
me) process on the video

Hi dansch37,
Thanks for your post. However, this Forum is meant to discuss
issues related to acrobat.com and not acrobat. To post an issue
related to acrobat please visit the acrobat forum :
http://www.adobeforums.com/cgi-bin/webx/.3bbeda8b/

I want one JSP which can handle the Hierarchy of links

Current System
EZStore page has a feature that allows static page content distribution to the store users. Currently this hierarchy information is stored in a database table and the content is stored in a directory on the web server. When changes are need to the site the developer is currently hand writing the SQL and routing GWI tickets to the DBA�s.
Modifications
Need to modify the process by providing a way to manage the content. Develop a JSP page that contains the necessary fields and should be able to add and modify the links. The page should store the hierarchy information in the database and the documents on the web server. The documents are stored on the web server in docs folder. The table structure is as follows and is located on server: ezdev, database: ezreports.

Welcome to the Apple community Yao.
If you mean that Find My Phone is asking for a password to a different Apple ID to your current Apple ID.
This feature has been introduced to make stolen phones useless to those that have stolen them.
However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details.
The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID using your current password, you don’t need access to this address if it’s previously been used with your Apple ID, once you have saved these details enter the password as requested on your device and then turn off "find my phone" and delete the account from your device.
You should then change your Apple ID back to its current state, save it once again and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
This article provides more information about Activation Lock.

Anybody running Logic X on a late '09 macbook? I'm wondering if my computer can handle the upgrade.

I know I have to update my operating system and RAM, has anyone done so with success?

This is good to know, thank you. Mine is a normal Macbook, I do mee the minimum requirement with a RAM upgrade but I fear it might be slow even so. Thank you for the input.

What is the MAX. limit of a Message which PI can Handle?

Hi Experts,
We have one requirment where in we need to send a large data which contains some Memo Fields as well as Photo & PDF document thru PI Web-service scenario. we would like to know is there any Message Size Limit at PI side. is there any setting. i this moment i do not know what will be the size of the message will get form. pl. note that this will be B2B scenario.
secondly for a given message how can i check the size of the message. we are on PI 7.31 JAVA Only SP9 Patch 11.
Regards,
Umesh

Hi Umesh,
as for as i know SAP PO system can handle the file till GB also but this will be based upon your system resources and configuration as well.
Please find the below link for further information.
http://scn.sap.com/community/pi-and-soa-middleware/blog/2010/10/18/pixi-pi-73-processing-of-large-files--teaser
Regards,
Naveen

Handling the context when integrating SAP with WBIMB

I need to integrate SAP systems with an integration platform that is based on WebSphere Message Broker 5 (WBIMB). Now I am looking for a feasible solution to integrate these platforms.
I am concerned about how to handle the context when integrating SAP with WBIMB.
I have read the topic SAP XI and WBI adapters (SAP XI and WBI adapters) in this forum with interest. However, my requirements are slightly different, and my knowledge on development in SAP is limited.
The WBIMB integration platform acts as an Enterprise Service Bus in a SOA. We have a general requirement about guaranteed delivery i.e. once and only once, and therefore the transport protocol is MQ. The HTTP protocol does not satisfy this requirement. Thus we can use Web Services when they are carried as SOAP messages over MQ, but SOAP/HTTP is not acceptable.
The SAP systems can act as service provider as well as service consumer. The WBIMB act as an intermediary, which routes service requests to the proper provider and service responses back to the consumer.
When acting as a service consumer, the SAP system shall specify the context such that WBIMB is able to route the service request to the service provider. Routing is based on the context, which is specified as a property in the MQRFH2 usr folder. Thus the MQ message containing the service request from the SAP system shall specify this usr property, and the value will depend on the requested service. In JMS, the value can be set by calling the TextMessage.setStringProperty method e.g. as TextMessage.setStringProperty(MyContext, XYZ).
When acting as a service provider, the SAP system shall pass the context from the request back in the response message to WBIMB. Actually, I want to pass the complete usr folder from request to response, because it contains more information than just the context property.
I need answers to the questions:
1. How can I set the context from SAP when it acts as service consumer?
2. How can I get SAP to pass the context (MQRFH2 usr folder) from request to response when it acts as service provider?
3. I have looked at the SAP XI JMS Adapter. It looks as I can set additional JMS parameters. But the property value will depend on which service to call. Do I need to setup a JMS Adapter per service or can I set the value dynamically?
4. Can the SAP XI JMS Adapter pass the context from request to response?
5. Are there better alternatives than using the SAP XI JMS Adapter?
Many thanks for any help you can give me in advance.

Hi Daniel,
Thanks for your answer. I expected it would turn out this way
So the good news is that when SAP is acting as service consumer it sounds fairly easy to set up a mapping from XI message to MQ context.
But when SAP acts as service provider it sounds as more customisation is required and I am worried about having to save the state. It will hit performance when the context is not carried as part of the message. In this case I prefer to use a generic solution on WBIMB, where I can handle the context for SAP (as well as other service providers). Then I only depend on the ability to set correlation in the response. But it will still cost performance because WBIMB also has to save the state on temporary MQ queue.
Ideally, the SAP XI/Adapter should be able to pass the context 'out-of-the-box' to better support intermediaries like the WBIMB as ESB. I put this on my wishlist
Anyway, I appreciate that you was able to confirm my observations.
BR
Allan

Error in Raising exceptions in a method and handling the same in the WF

Hi All
I tried to implement Raising exceptions in a method and handling the same in the workflow
in the same way given in SAPtechnical site .
1.by adding a error msg in exception parameter .
2. if the select query fails, to fetch the agent then :exit_return 9001 'ztable name' space space space.
3.in the Background activity in which this method is called there automatically one outcome appears ,and I hav acitvated that outcome and in that done what need to be done for that error handling - just send a mail to concern person .
4. in the normal outcome of the activity , the step to be executed are there .
but its not working , if exception come then the WF stuck there only . it do not follow the exception outcome .
Kindly help me , How can I do the exception handly in WF.
thanks & Regards
Kakoli

> That is usually the case - you catch an error in the underlying program and pass that back so the workflow can go into error.
> You're doing it correctly.
I don't think that's quite right.
If you define an error/exception in a method, it is automatically mapped to an outcome of the step/task.
If you activate that outcome, then you can handle the exception in a branch of the workflow.
For example: 'Remote connection is down, please contact Basis'
The step should only go into error if an outcome occurs that you have NOT activated.
So the original question is valid. Please give some more information on what the error message is..
chrs
Paul

A few good questions. I can handle the truth.

Similar Messages

Maybe you are looking for