A few more general questions

1) How is everyone testing the temperature their computers are running at? Is there a utility on the computer that does that? Sometimes my macbook runs very warm to the touch. When should get concerned?
2) I have my hard drive partitioned. HD #1 has a capacity of 47gb. HD #2 has a capacity of 8.50gb. The hard drive is supposed to be 60gb, so where did the extra 5 gbs go?
Thanks in advance for your help.

Hard drive manufacturers quote drive sizes based on a megabyte being equal to 1,000,000 bytes rather than the correct value of 1,048,576 bytes. Consequently a drive said to have 60 GBs (60,000,000,000 bytes) will actually have 55.879 GBs using the correct value for a megabyte. When the drive is formatted there's a slight loss of space that is allocated to the directory and the partition and disk block data further reducing the net available storage space to around 55.5 GBs for your particular drive.
So your "extra 5 GBs" hasn't gone anywhere if you use the "correct" arithmetic.
As for heat all MacBooks and MacBook Pros run very hot. This is not abnormal. Core temperatures for the CPU will typically run between 45-50C during idle (20-30C during sleep) and can reach as high as 85-95C under full load. Thermal shutdown is set for 100C. These figures are all within Intel specifications. Case temperatures can get very warm. Your User Guide has a specific warning about the heat.

Similar Messages

A few more Solaris questions

I'm sure this isn't the best place to post this, but I currently have a file server running Solaris 11 with a raid-z2 pool and I'm building a new vmware server out of some parts I've managed to get some good deals on might I add.
I'm building on a supermicro x8dt3-f board that has an LSI controller on board with a pair of xeon 5570's and 48gb ram. The processors and ram actually came from a sun blade that was tossed out for recycling, sadly the box had never been opened, but i got these for pennies on the dollar, so i'm happy
I'd like to move the current Solaris file server into a VM on the new ESXi 5.1 host and passthrough the LSI controller.
I've been reading, and reading and reading and i find the more i read, the more questions I have and the less clear some of the answers are getting.
First, from what I gather, Solaris 11 has only been added to the supported guest list in ESXi with the recent esxi 5.1 version as I understand? So all should be fine here? Can someone confirm?
second, i've read about issues with LSI controllers under solaris 11. Is this something that has been addressed in 11.1?
Third, trying to find the best method to conver the physical system to virtual under ESXi
The first thing I plan on doing is backing up my data from the pool, though it will be scattered across a few systems. Then I plan on exporting the pool to move the disks physically to the new controller in the VM. The question I have here, is will the share flags and permissions be retained when I import the pool? or do I have to redo all that?
But then, what's the best method to move it to a VM? The one document I see come up the most is moving a physical solaris system into a zone on another system. Can it be transferred to the global zone? Could I do a new install in a VM, and move the existing install to the global zone, import my pool and call it a daY?
Or do I dd the OS disk, convert the image and drop it into vmware, get the hardware working, and then import the pool?
Or is there a better way? Has anyone got any online docs in mind that may help specifically with this migration? everything i'm finding is scattered, maybe i'm not looking for the right things but I could use some pointers if anyone has suggestions.
I suppose I should note, i have it integrated with an Active directory, this is why i'm worried about permissions being retained when i import the pool
I just want this to go as quickly and smoothly as possible, with as little headache as possible. it's my home setup, so realistically it takes the time it takes as long as things go smooth

I know this may not be the answer you are looking for, but I think you are making it more difficult than it needs to be.
One other option is to leave your Solaris Storage server on the bare metal of this new beast of a machine you are piecing together. Then, use VirtualBox 4.2.6 which is support quite well in Solaris to run whatever virtual machines you where intending ESXi to be used for.
This way you have the fastest possible storage setup without the issues of hardware passthrough. And the fast storage now benefits the VMs running on it. Not to mention the other neat options now of running lzjb compression for the VMs. either using zvols for the VMs, or just virtualbox vdi files sitting on a compressed zfs filesystem.
As far as the LSI 1068E controller goes, their website only shows drivers for Solaris 10. So unless Solaris 11 has the drivers built in, you may not be able to use that controller. Believe me I feel your pain in this one.. I have the d#$$!est time finding good SAS HBAs for Solaris 11.1 and the few I did find had questionable drivers. Areca 1320 cards seem to work well, as do Adaptec 64xx and 68xx raid cards. LSI has a new line that supposedly works with Solaris 11.
My advice is to try a baremetal install of Solaris 11.1 on the new machine and see if you can recognize drives on the LSI controller, if not then use the 6 onboard SATA ports if that is enough for the drives. Otherwise purchase an Areca 1320 which is only like 230 bucks for the 8 port version. http://www.newegg.com/Product/Product.aspx?Item=N82E16816151116R

A Few More Quick Questions

Alright, first, I'm just wondering, is there anyway to charge my iPod on antoher computer without it affecting the data currently on thye iPod? If I install iTunes on that computer and there's nothing in it, then wouldn't that automatically delete my current data?
Secondly, is there much harm to battery life by playing WAV files and Apple Lossless files? I collect bootlegs of Dave Matthews and Pearl Jam and about 8 albums (roughly 125 songs) are in WAV and about 600 Songs are in Apple Lossless.
Thirdly, what's the best way to go about "conditioning" the battery so that I get the most out of a charge? Also, in terms of battery time, does it include times when music is paused or stopped or is it only when music is playing? For example, when somebody says that at first charge, you can get 5-6 hours of use, does that mean 5-6 hours of listening or simply 5-6 hours before the iPod needs recharging?
Thanks.

You can charge it on another PC by changing your settings to manual updating, that way it attempt to autosync, see here for details: http://www.apple.com/support/ipod/tutorial/ipgettingstartedt3.html
Alternatively get an separate charger.
Also using Apple Lossless won't harm your battery it will just give you less listening time with a charge because the file size will generally mean that the iPod has to access the hard drive more often than reading from the cache.
For getting the best from your battery look at these tips: http://docs.info.apple.com/article.html?artnum=61434

More General Questions.

Hi Guys,
1. Is it better to "close" a production order or "technically complete" it after the production is complete? Will it make a difference?
2. What dates are more important for tracking in a production order? Basic Dates or Actual Dates?
3. I am planning on implementing cost center accounting to capture costs from the machine and labor times given in the routing. Is there any easier method?
Thanks in advance for your help.
Will give points.

Dear Rao,
1. Is it better to "close" a production order or "technically complete" it after the production is complete? Will it make a difference?
It is not the question of which is better, they serve different purposes.
TECO - The production order will not be relevant for MRP. Settlement can be done.
Confimations and GR/GI of production order still possible.
CLSD - The production order will not be relevant for MRP. If goods movements have taken place and / or activity booking done, then "closing" is <b>not possible</b> without settlement done. Confimations and GR/GI of production order <b>not possible</b>..
2. What dates are more important for tracking in a production order? Basic Dates or Actual Dates?
Both of the dates are important and have their roles to play.
Basic dates are important for scheduling.
Actual dates are important for leadtime scheduling and consequently capacity planning.
3. I am planning on implementing cost center accounting to capture costs from the machine and labor times given in the routing. Is there any easier method?
Your plan is nice and cool.
Hope this will help you, please confirm.
Regards,
Angshuman Kar

Round trip workflow with proxies between Premiere and AE / a more general question about how these programs work?

Hi all,
I'm new to editing with proxies in Premiere and have some questions about how to handle the relationship with After Effects. Say I have a rough cut (with proxies) and I want to send it to AE to do some effects. The simplest thing to do seems to be to replace the proxies with the originals in Premiere, send the project to AE and do my thing. But if I then want to send the project back to Premiere, it will involve the original files, which are too machine-intensive for me to edit. In theory, it seems like there should be a way to send the project with original footage to AE, do effects, send it back to Premiere, and then replace it with proxies to do further editing while retaining the effects.
This leads to a confusion about how AE works. When I do an effect, am I correct in assuming that it does nothing to the original file? If that's the case, it seems like it shouldn't matter (in the editing stage) what file AE "applies" an effect to (proxy or original). But I feel like there's a hitch in this workflow. The same question could also be asked about going back and forth in Speed Grade.
Perhaps there is no real answer to this and the best option is to save effects and grading for after I have picture lock, but sometimes that's not entirely possible or convenient, etc.
Hopefully this makes some sense—It's a little hard to explain.
Thanks.

Hi Mark,
Here are the specific sections of the manual that should give you the best explanation regarding the Check out/in workflow for FCP projects in Final Cut Server:
Check out:
http://documentation.apple.com/en/finalcutserver/usermanual/#chapter=7%26section =5
Editing:
http://documentation.apple.com/en/finalcutserver/usermanual/#chapter=7%26section =6
Check in:
http://documentation.apple.com/en/finalcutserver/usermanual/#chapter=7%26section =7
-Daniel

IMac 21.5" performance on COD4 and few other general questions from a newbi

I'm a current and long time PC owner who is sick of messing with registry problems, performance issues and viruses.
I am strongly considering the purchase of a 21.5" iMac, but have some reservations as to whether I may have performance issues playing Call of Duty 4 using Parallels or Boot Camp. Will the 21.5" machine with the upgraded 256K video card handle this and other games OK? Other than that, I am a light user who mainly surfs the web, sends email and tracks finances with quicken. Games and some video are about the heaviest applications I use.
Currently on a 3 year old Pentium Duo Dell with 2GB ram, 512mb Nvidia video card.

I'm just extremely concerned that the 21.5" iMac won't have enough juice for multi-tasking such as playing COD4 while surfing the net. Even my hopped up gaming PC (older dual core with 512K video card) struggles at times. I'm wanting to make the jump to Mac, just afraid of spending almost $1500+ and winding up with worse performance than I already have.
Unfortunately, the nearest Mac retailer is over an hour away from me so there isn't a real chance to put one through it's paces in person.

Where to direct a general questions about foreign films subtitles?

I recently purchased a foreign film "Break Ke Badd" from the iTunes store. Although, it didn't specify that it had English subtitles, I assumed it did. After the full download, I tried to watch it and there weren't any English subs. I contacted iTunes and they more than happy to refund the money back to my account. Now after a few weeks, the iTunes store DOES list Eng subs for this film. I don't want to purchase it again and have to contact iTunes for another refund...Therefore my question is, is there a general question contact one could use to find an answer to my question. Basically, to verify that this movie, indeed has English subs before I re-purchase.
Any info is appreciated!

Yes I know as the [https://support.mozilla.org/en-US/questions/ Questions] section is more for desktop Firefox support and the place I linked to is for "Firefox OS" support in English where some who are involved with it do post in it occasionally.
I would have moved that [https://support.mozilla.org/en-US/questions/962783 thread] to the "Firefox OS" English section, however I cannot as the [https://support.mozilla.org//questions/ Questions] and [https://support.mozilla.org/forums Contributor Forums] are not the same.

General Questiona

HI All,
I have few general questions, Please help me to underatand
1. What is good money /5py
2. what is /5U1 Tot ER tax how will it get generated.
Pls give me an example.
Thanks
Veer

Veer,
Good money (Wage Type /5PY) is the excess of current period earnings over any offsets from inflows. Itu2019s calculated during a retro when a claim is present. For instance:
During pay period 01.2010, an employee leaves the company and owes 5,000. The employee does not get paid because more is owed than is payable.
During pay period 05.2010, the employee is rehired at a salary of 6,000. When the payroll is run, the system will retro to pay period 01.2010 and record 1,000 u201CGood moneyu201D in wage type /5PY in pay period 05.2010. The calculation is:
+ 6,000 Salary
- 5,000 Claim
Regards,
Howard

SAP CM25 which profile to use and why and some general questions

Hi there,
I have a few general questions, if you may share your thoughts on this.
In a manufacturing environment, is CM25 more used to finite schedule the work centers or labor or both ?
Is it a good idea to even finite schedule the planned orders or just production orders ? We want to create production orders 1 week ahead of the production schedule and planned orders gets created 3-4 weeks earlier than production order gets created.
The graphical tool seems to be slow sometimes when dispatching and doing some actions on the screen, has any one have any say on this. Should we need to have better computers on the floor for this to work ?
I have been trying my solutions using CM25 and not CM21 or CM27 using the profile SAPSFCG005, is there any other profile that I need to consider and other transactions to consider like CM21 or CM27 for certain purposes?
Thank you

Hello
In a manufacturing environment, is CM25 more used to finite schedule the work centers or labor or both ?
It can be used for both depend upon bottle neck resource whether machine or labour.
Is it a good idea to even finite schedule the planned orders or just production orders ? We want to create production orders 1 week ahead of the production schedule and planned orders gets created 3-4 weeks earlier than production order gets created.
Better it should be finite planning for planned order also you can use MRP with lead time scheduling.
The graphical tool seems to be slow sometimes when dispatching and doing some actions on the screen, has any one have any say on this. Should we need to have better computers on the floor for this to work ?
It depends upon the data load and selection,
Restrict the number of objects to be displayed, for example, select only a small number of work-centers/orders.
Customize the time profile (transaction OPD2) such that the database read period, the planning period and the evaluation period are as small as possible. As a result, fewer objects are read and displayed.
Refer KBA 2038780 - Tips for performance improvement on Capacity Leveling
If you want to process more orders, check whether a batch planning (planning in the background on transaction CM40) is possible.
I have been trying my solutions using CM25 and not CM21 or CM27 using the profile SAPSFCG005, is there any other profile that I need to consider and other transactions to consider like CM21 or CM27 for certain purposes?
It depends upon your requirements which transaction to use and which profile. You can customize your own profile also.
Best Regards,
R.Brahmankar

A few "technical" iPhone questions

Believe it or not, I'm not going to complain about the price drop!
Instead, I've owned my iPhone for a couple of days now, and have a few burning questions:
1) Does the iPhone have the ability to keep nagging me that I missed a call?
2) Many times, when I make or receive a call, either I cannot hear the other end, or the other end cannot hear me. It's like mute is on, but it isn't. Has anyone else had this problem? (It not just between iPhones, either, it's happened with me calling a Verizon number).
3) Is there any way to have the contacts screen display the records my the way Outlook says to display (file as) a contact? If I have Jim Jones at Acme Computer, I'd like the contact on the iPhone to be under Acme Computer, not Jim Jones. If I have 10 people at Acme Computer in my contacts, doesn't it make sense to have them grouped together instead of spread all over the alphabet?
4) Is there any way to put some of the "nested" funtions on the main iPhone page? In other words, under PHONE, there is RECENT and VOICEMAIL. Is there a way to put those as icon on the main icon menu screen instead of having to touch, touch, touch to get to them? It sure would be nice, while driving, to just have to touch one button to get to where I want instead of having to take my eyes off the road to navigate a bunch of screens...
Thanks for your input.

Darryl Mylrea wrote:
1) Does the iPhone have the ability to keep nagging me that I missed a call?
No. Not at this time. I haven't had a phone that does though.
2) Many times, when I make or receive a call, either I cannot hear the other end, or the other end cannot hear me. It's like mute is on, but it isn't. Has anyone else had this problem? (It not just between iPhones, either, it's happened with me calling a Verizon number).
During the two months plus I've had it, this has happened a few times. I just call them back and it's fine. This did happen occasionally with my old phone as well.
3) Is there any way to have the contacts screen display the records my the way Outlook says to display (file as) a contact? If I have Jim Jones at Acme Computer, I'd like the contact on the iPhone to be under Acme Computer, not Jim Jones. If I have 10 people at Acme Computer in my contacts, doesn't it make sense to have them grouped together instead of spread all over the alphabet?
I use Apple Address Book which has a check box to designate the contact as a business instead of an individual. The listing is then alphabetized by the business name instead. Is there anything in Outlook to do this same thing? I'm not sure what would happen with more than one listing from the same business. One way I've gotten around it in Address Book is to add multiple phone numbers under the business (or household for friends/families with more than one phone number) and then create a custom phone type for each person (ie. Jim Jones cell, Jim Jones home, etc.). One other thing to keep in mind is to use Groups. If you find that your contact list is getting too crowded, create some groups in Outlook and then sync the groups to your iPhone. You could create a group that had all your contacts from "Acme Computer".
4) Is there any way to put some of the "nested" funtions on the main iPhone page? In other words, under PHONE, there is RECENT and VOICEMAIL. Is there a way to put those as icon on the main icon menu screen instead of having to touch, touch, touch to get to them? It sure would be nice, while driving, to just have to touch one button to get to where I want instead of having to take my eyes off the road to navigate a bunch of screens...
So far the only keys that you can change are in the iPod portion. Give it a few more days. Navigating the screens will become second nature. I have no trouble in the car.
Good luck and enjoy your new iPhone!

General Question on Proxies

Hi,
I have few general questions....
How to decide which proxy to be used: Java or ABAP?
What are the deciding factors?
Which one is better when it comes to performance?
Regards,
Rajani Kumar

bump

Camileo charging problem (solved) and a general question!

Hi all!
First of all, I was going to ask for help as to why the Camileo S10 was not charging (the orange light wasn't flashing), and I'd seen a few people with similar problems.
The solution?
Give the contacts on the battery a clean.
The insulation sticker that comes on it must leave some kind of residue on it, and it's enough to prevent charging. Now it's flashing away happily :]
So my general question was, is it possible/advisable to use the camera on the mains?
Rather than constantly draining and charging the battery during long shoots, I'd prefer to just leave it plugged in!
Thanks very much in advance!
Paul

Hi
I think the battery handling is always the same no matter what product it is
From time to time the battery should be recalibrated.
This means that the battery should be discharged fully and after then you should charge it again until the battery would reach 100%
I do this with all my batteries; mobile phone battery, digi cam battery and notebook battery.

General Question re logical workflow (Multiple Products/Sales Teams)

Currently we are upgrading from a highly customized CRM environment developed in CRM 4.0. We are hoping to move to an out of the box solution with 2015.
But I have a general question. We are a service company with different sales groups for each of our products.
Currently we have customization for each service so a Sales person is assigned to a specific product for the customer.
So my question is, how is this handled out of the box. I am sure there are many many many companies in the same situation.
So say 10 products with sales group for each product.
Then a customer with multiple departments. Each sales group needs to contact the specific department.
So a customer could potentially have 10 different sales people contacting different people in the customers organization.
How do you know when someone has already made contact?
If we just look at the activities it is not very clear that contact has been made for a specific product.
Even with our customizations, there have been many situations where 2 sales people contact the same person at a clients office and we end up looking very unorganized.
Any thoughts or comments are appreciated.
If this is not the right place to post this type if discussion, please redirect me.
Thanks

As an example, for 37-minute sequence of footage (made up of multiple clips) it's taking 50 minutes to first export a non-self-contained, time-code-reader-filter-added Quicktime.
Did you render fully before you exported? That helps. But this is also a GOP format, and it takes longer to do pretty much everything, as it is a processor intensive format.
1) How much more memory would help this work flow go faster, and approx. how much faster??
None. RAM doesn't come into play here. PROCESSOR speed is all that matters. What will make it go faster is enabling QMaster to have Compressor access all cores of the processor. Or getting hardware to help with the compression, like the Compress HD from Matrox. But that only boosts encoding to H.264.
2) Has anyone else done this type of work-flow, and been able to do it more quickly? Is RAM the issue? Any suggestions for a more efficient work-flow?
RAM isn't the issue. Faster Processors, hardware boosting...converting the footage to ProRes before you begin editing...all help.
RAM isn't what is hindering you here.
Shane

Business Objects Training -General Questions

Hi,
I am just Going through the Business Objects...had some few general questions.
1)What is the current Version on BO
2)Where does Crystal reports & Xcelsius fit in Business Objects
3)Does Power Center & Informatica are also included in Business Objects
Thanks

The latest version of Business Objects Enterprise is XI Release 3.1 Service Pack 2. There have been several fixpacks delivered on top of this as well.
Crystal Reports and XCelsius are tools to build Reports and Dashboards respectively. While XCelsius is suited for creating sleek dashboards with very aggregated data - usually less than 2000 rows per report, Crystal Reports can be used for reporting off data warehouses requiring reporting off large data sets.
Informatica Powercenter is a tool proivded by an independant vendor and is not a Business Objects Product. Business Objects Provides Data Integrator, which is pretty much as rugged as Informatica and provides all the functionalities of ETL(Extraction Transformation and Loading).

I have a handful of general questions about Firefox OS as a consumer..

I couldn't find a better place to post this, so I'm trying on here.
I'm in the market for a tablet (high-end), and I'm holding off on getting an Android-powered one because of Firefox OS. However, I have some general questions and concerns regarding performance, software and hardware. Here they are.
1. Is the Firefox OS interface as responsive as a native experience on say an iPad or an Android tablet? (Is there any lag on swipes between screens, button presses, etc?) If not, will it be in the future?
2. Will I miss the Android marketplace or the Apple app store, being restricted to only HTML5 apps? Do you think this will become an irrelevant question as the HTML5 app ecosystem grows?
3. Do you think the quality of HTML5 apps will be inferior to those from existing app stores because they are free?
4. Will the Firefox browser be the only one available in Firefox OS? (i.e. will there be the option to use Chrome, Opera or any other browser if the user so wishes?)
5. Will Firefox OS include useful utility apps, such as an alarm clock, a calendar, a weather app, etc?
6. I read a lot, both on the web (news, video game reviews), as well as ebooks. Will Firefox OS on a tablet be a pleasant experience conducive to e-reading? (Will it include a good ebook reader app?)
7. Will there be a high-end Firefox OS tablet that is comparable in specs to the Nexus 10? (i.e. impressive screen resolution, powerful CPU/GPU, lots of inputs/outputs like USB, HDMI, microSD, etc) When do you think such a device might become available?
8. Would it be possible to flash Firefox OS onto say a Nexus 10 or other tablet or phone if one wanted to use it as their OS instead?
Thanks!

1. Depends on the phone but a avererage power android phone would likely cost the same as a high end firefox os phone.
2. HTML 5 is really the future of the web, I've heard that Firefox will let you package apps to be playable offline, but not sure if thats true.
3. I '''think''' Firefox OS may have paid apps that will be restricted to users who buy them.
4. I think Mozilla will be nice enough to let Google and Opera make browsers. Google let Mozilla do that with FF for android.
5. See the simulator https://addons.mozilla.org/en-us/firefox/addon/firefox-os-simulator/
6. too early to say
7. too early to say, but Foxconn (helps apple) makes some apple products, so yes in the future is see a high end Firefox OS tablet 2-3 years down the road.
8. not sure
NOTE: Please note that we are only contributors, we dont develop firefox os.
You can ask more on the IRC channel as there are likely devs there.
https://client00.chat.mibbit.com/?server=irc.mozilla.org

A few more general questions

Similar Messages

Maybe you are looking for