A few post config questions on new setup

Hi Group,
Just a few post config questions.
First, how can I confirm my controller is in fact associating properly with an NTP server?  On a typically cisco product, I could just do a 'show ntp associations' or a 'show ntp status'.  I cannot see a way to confirm this on the gui or command line.
Second, on my guest network with web-auth, if one were to choose to not use https for web-auth and instead use unsecure http, would that be possible and if so where in the gui?
Thanks.

The third field is from a WLC running v7.4 not v7.2.  I usually would install a 3rd party certificate, but what eles you can try is issue this command on from the CLI.  It had issues working with certain code versions, but you might as well give it a try.
config network web-auth secureweb disable
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"

Similar Messages

  • Why can't I post a question from my new system?

    Hello All:
    I was just trying to post a question from my new mbp but it wouldn't allow me to do anything.  It continually gave me a message highlighted in 'red' that i was;t allowed to modify or post anything.  I've been asking questions for quite a while and have never seen this.  I also happen to have my older bmp, also logged onto the 'Apple Discussions' site, open beside me.  Can anyone explain this to me please?  BTW, my new system obviously has Yosemite on it while my older bmp has Lion.  Thanks in advance, to all those who respond.
    Regards,
    Ciaochiao

    ChitlinsCC, I'm adding your reloaders to my article on how to make using ASC easier.
    Here is my ASC work flow...
    1) I login.
    2) Block the automatic 30 minute logout.
         Unless you do something every thirty minutes you get logged out.  The forum software waits to tell you this as long as it can to keep you in suspense  ;-) . Filling out a reply is the exception to the thirty minute window.
            Start an auto reloader.
    Safari = SafariTabReloader
    Firefox = ReloadEvery: "Reload web pages automatically"
    Others = Reloaders | Cerberus - Support Center
      You need to pick a page that will reload over time without stalling out. It's ASC.  I've found my profile display the best to use. I get my Profile page after some  logins.  It's ASC.  Change rccharles to your apple id.
    https://discussions.apple.com/people/rccharles?view=discussions
    Reply technique
    Open a new browser window.  Pick some discussion.  Open a reply window.  As long as this reply window is open, you will stay logged in.  The 30 minute times is reset as needed by the ASC software.
    3) I open another window to do my normal ASC browsing.
    4) I have a FireFox bookmark to goto the discussions that I have participated in. I've modified it to add on the content stuff.
             turingtest2 recommends. Change rccharles to your apple id:  
    https://discussions.apple.com/people/rccharles/content?filterID=participated~obj ecttype~objecttype%5Bthread%5D
    5) Use turingtest2's generated links with the /content suffix as browser bookmark to the ASC discussions: 
    Site map of Communities and Categories
    https://discussions.apple.com/docs/DOC-2463
    6) Adjust the ASC web page layout.
    For FireFox
    I run with Hiroto's modification to user content.  This is the only way these forums are readable for me.  How to adjust the format and layout of ASC Web Pages:
    https://discussions.apple.com/docs/DOC-7501
    For Safari
    "ASCPowerTools is a Safari Extension designed to give more control"
    http://www.etresoft.com/ascpowertools
    7) Read and answer my old posts.  I kind of memorize the time I last posted. ( It's way bad that apple eliminated the last poster to a thread. )
    8) I use tabbed browsering.  From a list of discussions, hold down the command key then click on the link. You get two tabs this way. The original window will keep where you have been.

  • Why would Thunderbird ask "create a new Get Satisfaction account" when I want to post a question

    I know I am in wrong place talking about Thunderbird but Mozilla is a name I trust.
    When I want to ask a question in Thunderbird site, I had to make new account when I wanted to post the question it is asking to make another account or use Yahoo/Facebook/Twitter.
    Because of all this kind of cheating and fake things I started using Mozilla products but it seems I was wrong.
    Just enlighten why would two accounts are needed to post a question?
    Thank you

    Good news, thunderbird support is coming to this site soon.
    SEE
    * https://bugzilla.mozilla.org/show_bug.cgi?id=939779
    * https://bugzilla.mozilla.org/show_bug.cgi?id=939781

  • My photoshop element 10 stop working,  I am not able to open ti anymore.  ?  I posted this question a few days ago and I did not get any anwer yer,  please help

    My photoshop element 10 stop working,  I am not able to open ti anymore.  ?  I posted this question a few days ago and I did not get any anwer yer,  please help

    I have photoshop premiere element 10  editor and organizer    and I have a Macbook pro 10,9,9
    When I try to open a picture with element editor or if I try to open PS editor directly  I see this
    file:///Users/main/Desktop/Screen%20Shot%202014-11-26%20at%201.17.35%20PM.png
    when I click on   Modify    it doesn't open and I have this window
    file:///Users/main/Desktop/Screen%20Shot%202014-11-26%20at%201.21.07%20PM.png
    and if I click  REOPEN  , I still have the same message
    Lucie

  • Help! Where should I post this question, so I can get it answer?

    I'm with the greastest Apple communuty on earth, but know ones responds to my question, except once. Is it worded incorrectly or difficult to understand. I been at for 4-5 months. Any help is well appreciated.
    see below for my past adventures:
    Can you help? I have pot this problem on the discussion board times 3 with no response except this time. See below.
    down;oading podcast
    Posted: Jun 23, 2007 8:04 AM
    
    Reply
    
    Email
    Can Itune get too full whereas it will stop downloading podcast automatically or manually? I just exported my 2006 " bibleonradio" podcast to a folder on my harddrive. Immediately itune started downloading podast from that site. But for the last 4-5 months it would hit and miss with downloading and the last 2 weeks it quit altogether.I would go to the site and download the podcast to a selected itune folder as a mp3 for listening.
    Do I need to do some type of maintenance to prevent this from occurring? The site is simple reading of bible scriptures. Could itunes get confuse with 2006 podcasts, thinking I already have the podcast, even though the release date for the new podast are mark 2007?
    imacG5 , super drive   Mac OS X (10.4.7)  
    
    Diane Wordsmith
    
    
    Posts: 266
    From: Nashville
    Registered: Feb 20, 2007
    Re: down;oading podcast
    Posted: Jun 24, 2007 9:23 AM    in response to: Austin Smith2
    
    Reply
    
    Email
    Look at the Podcasts in your iTunes Library. Do you see a little exclamation point to the left of the listing? If so, click on that.
    iBook G4 (& an iMac running OS 9)   Mac OS X (10.3.9)   iPod Video
    
    Austin Smith2
    
    Posts: 114
    Registered: Oct 31, 2001
    Re: down;oading podcast
    Posted: Jun 25, 2007 3:35 PM    in response to: Diane Wordsmith
    
    Reply
    
    Email
    Thank you for your reply:
    I have that symbol on some of my other podacst sites, but not this one because I listen to it daily, sometimes 2-3 times a day. Could the exclamation symbol for the othe sites, which goes away if I start listening to them again affect this podcast? but these site with the exclamation also hit and miss when itunes downloads, as much as 2-3 weeks once I start it back up.
    imacG5 , super drive   Mac OS X (10.4.7)  
    
    Diane Wordsmith
    
    
    Posts: 266
    From: Nashville
    Registered: Feb 20, 2007
    Re: down;oading podcast
    Posted: Jun 25, 2007 3:49 PM    in response to: Austin Smith2
    
    Reply
    
    Email
    What's happened to me is that some Podcasts I subscribe to I might get lazy about listening to. Several of the Podcasts will pile up, and after a while iTunes will stop updating if you haven't listened to them. When I click on that little exclamation point in a circle, it will tell me that iTunes hasn't been updating that podcast because I haven't listened to it in a while. I think it asks if you want to continue (or maybe you have to click on subscribe again to get them started back).
    If you are listening to this particular podcast every day, that shouldn't be a problem. And not listening to the other ones shouldn't affect this one. Sorry I can't be of more help, but I'm not sure what is causing it.
    You might go to iTunes> Preferences and click on the tab for Podcasts and see what your settings are there.
    Diane Wordsmith
    iBook G4 (& an iMac running OS 9)   Mac OS X (10.3.9)   iPod Video
    
    Austin Smith2
    
    Posts: 114
    Registered: Oct 31, 2001
    Re: down;oading podcast
    Posted: Jun 25, 2007 8:07 PM    in response to: Diane Wordsmith
    
    Reply
    
    Email
    Thank you again for your reply.
    My settings in preference for podcast are::
    check for new episodes-every hour
    when new episodes are available-download all
    keep-all episodes
    does anyone else have this problem or any idea how to fix it?
    2nd post
    
    Converting
    Posted: Jun 13, 2007 8:49 AM
    
    Reply
    
    Email
    Trying to come up with an alternative to incomplete podcasts downloads from a website. What I'm trying to do is convert some the missing podcasts file from a website that itune don't download-reason unknown. I'm able to download a mp3 file of the podcast from the web site to my desktop, but I would like to add this to my podcast library under the same name of the podcast that I subscribed, then add to my playlist for continuous playing. Is this possible?
    Thank for any Help,
    Austin
    3rd post
    
    automatic podcast downloads incomplete
    Posted: Jun 9, 2007 10:54 AM
    
    Reply
    
    Email
    I was on the wrong forum. Hope someone might have an answer.
    Austin Smith2
    Posts: 102
    Registered: Oct 31, 2001
    automatic downloads incomplete
    Posted: Jun 4, 2007 7:54 AM
    Reply Email
    Some Podcasts have many episodes and when I subscribe, I get them all at once. But with some podcasts ( http://www.bibleonradio.com/ ), only a few episodes download, and I know there are many others available either because I can see them listed by going directly to the site or because they are numbered and some are clearly missing. I have tried setting my preferences both to download the latest edition of a podcast when I update or to download ALL editions. No difference either way.
    Strangely enough, if I am patience , sometimes the gaps will fill themselves in or all at once when I choose to click update. Anyone have any ideas why this might be happening? Any help would be greatly appreciated. I email the web administrator and they said they were able to go to the itune store and download all the recent episodes. Below is my email conversation.
    Thanks,
    Austin
    imacG5 , super drive Mac OS X (10.4.7) Report this post
    Austin Smith2
    Posts: 102
    Registered: Oct 31, 2001
    Re: automatic downloads incomplete
    Posted: Jun 7, 2007 4:07 PM in response to: Austin Smith2
    Reply Email
    Oops, I left off the dialog. Hope someone can Help.
    Austin
    From: Austin Smith [mailto:[email protected]]
    Sent: Monday, February 19, 2007 7:16 AM
    To: [email protected]
    Subject: podcast
    no podcast downloading after feb 17th. Can you help?
    On Feb 19, 2007, at 8:45 AM, MasterMedia wrote:
    Austin,
    If you mean podcasting of the One Year Audio Bible, then whenever the podcasting is behind you can always go out to the website and download from there. That’s usually been updated even when the podcast has not. Sorry for the inconvenience but the podcast should be brought up to date soon.
    MasterMedia
    From: Austin Smith [mailto:[email protected]]
    Sent: Tuesday, February 20, 2007 7:21 AM
    To: MasterMedia
    Subject: Re: podcast
    Thank you for your quick reply.
    I was able to get itunes to download all the updates except,
    Feb 18 New testament,
    Feb 20 New Testament,
    Feb 22 Old and New Testament.
    Is this a problem on my end?
    You wrote, "If you mean podcasting of the One Year Audio Bible, then whenever the podcasting is behind you can always go out to the website and download from there."
    If I manually download the mp3 from your website, can I put them into the postcast library?
    From: [email protected]
    Subject: RE: podcast
    Date: February 20, 2007 9:14:44 AM CST
    To: [email protected]
    Austin,
    I just went out to the iTunes store and tried to download those dates you had a problem with and I was able to download them without any problem. Maybe you should try again. And yes, you can manually download them from our website and store them into your podcast library. I’ve done that before and it works too.
    MasterMedia
    imacG5 , super drive Mac OS X (10.4.7) Report this post
    StarDeb55
    Posts: 6,134
    From: Chandler,Az.
    Registered: Jan 8, 2005
    Re: automatic downloads incomplete
    Posted: Jun 7, 2007 4:12 PM in response to: Austin Smith2
    Reply Email
    Just a suggestion, since this is a podcast issue, you might find more help in the podcast section of the Mac forum.
    iMac G5 2.0 Mac OS X (10.4.9) 60GB 5G iPod, 2G iPod shuffle, iTunes 7.2 Report this post
    Austin Smith2
    Posts: 102
    Registered: Oct 31, 2001
    Re: automatic downloads incomplete
    Posted: Jun 9, 2007 10:50 AM in response to: StarDeb55
    Reply Email
    Thanks.
    imacG5 , super drive Mac OS X (10.4.7)
    imacG5 , super drive   Mac OS X (10.4.7)  
    Report this post
    Austin Smith2
    
    Posts: 114
    Registered: Oct 31, 2001
    
    Re: seeking wisdom-please help-automatic podcast downloads incomplete-
    Posted: Jun 13, 2007 7:29 AM    in response to: Austin Smith2
    
    Reply
    
    Email
    Guys am I asking the wrong question? I have posted this question 3 times, but I don;t get a reply. Am I in the wrong section? Am I the only one experiencing this problem?
    imacG5 , super drive   Mac OS X (10.4.7)  

    Hi I found the answer from another post. So far everything is working find. I been trying to fix this since march,
    from
    Mike N. (nahyun...
    Posts: 2,814
    From: New York, NY
    Registered: Oct 1, 2003
    Re: itune application and itune folder
    Posted: Jun 27, 2007 7:16 AM in response to: Austin Smith2
    Solved
    Reply Email
    Deleting the application rarely solves anything on Macs. A better starting point is normally to delete the preference file for the application (in Users/~/Library/Preferences/com.apple.itunes.plist) or see if you have the same problem in another user account on the computer.
    PM MDD(1.25GHz 1.25G-RAM 320G-HD) Mac OS X (10.4.10) 20"ACD USB2Connect MacBook (2.0 White)-2GB Report this post
    Austin Smith2
    Posts: 118
    Registered: Oct 31, 2001
    Re: itune application and itune folder
    Posted: Jun 27, 2007 12:51 PM in response to: Mike N. (nahyun...
    Reply Email
    Mike, deleting the preferences did the trick, but I don't know why. Itunes downloaded 5 days of podcast! Hurray!! Thank you!!!!!!!!!

  • I'm not sure if I am writing this in the correct area (this is my second attempt at posting a question), but I have a comment about a recent store experience in Sandusky, OH.  I am not a current Verizon customer, but I was visiting friends and we had to g

    I'm not sure if I am writing this in the correct area (this is my second attempt at posting a question), but I have a comment about a recent store experience in Sandusky, OH.  I am not a current Verizon customer, but I was visiting friends and we had to go to the store to get something taken care of.  First off, allow me to compliment the nice, new store.  Boy, its changed over the past few years ago when I was in last. My comment is mostly directed to one specific employee.  When we entered the store, we were "welcomed" by a sloppy dressed gentlemen (his clothes were probably two sizes two small), which really struck me as unusual because every other employee in the store was dressed really "casual" with nice sporty clothing and red shoes.  Either way, after being entered into the computer, the gentlemen told me to wander around or have a seat in the back and someone would be with us soon.  As soon as we walked away from the door, the gentlemen handed his "duty" off to another employee who took over welcoming people coming in.  For whatever reason, I felt glued to him as he stood out to me.  After leaving the door, he immediately went to the back of the room, hunched over a cabinet, where he stood for the next 30+ minutes playing on his phone, frowning and not speaking to anyone around him.  Again, I found this unusual because everyone else was overly friendly and smiling.  I finally decided to walk by and see what he was doing.  It appeared that he was texting someone.  He paid no attention to me whatsoever as I walked by, just continued to frown and text on his phone.  I did take not of his name tag for future reference.  His name was Justin.  I am assuming he's the manager of the location as he was just standing around while everyone else worked.  I do understand that managers aren't necessarily doing the "dirty work" of the employees, but he could have at least found some better fitting clothing (I find it hard to believe Verizon doesn't supply it), been a little friendly, pretended to be busy, and not been texting the entire time we were there.  Again, the store was great, the other employees were very helpful, but the manager seemed to be doing is own little thing and it didn't put off a good image for the rest of the store.  Just wanted to share my comments.

    lisab101,
    We appreciate you reaching out to us. We greatly appreciate the feedback that you have provided us. Please know that we will lift this up to management and the issues will be addressed.
    Thank you,
    RobinD_VZW
    Follow us on twitter @VZWSupport

  • Voice GW Config Question

    Hi Everyone
    Yesterday I posted a question about redesigning the way our voice network looks, I'm removing 6 CUCM 4.3 boxes and I'm going to have those sites register with our Sub which is 10.5.1 in our data center across the WAN. Jaime answered my question and gave me some good insight on what to do for each site.
    1.Create DP,CSS,PT on the Pub
    2.Enable SRST on the GW
    3.Make necessary changes on GW
    4.Create LRG to have the site use their local GW
    I've been reading on how to get these task done and I have a question about #3, I'm looking at the config from the GW for the  test sight and the VoIP dial peer is referencing the CUCM node currently on site. Would modifying the IPV4 address to reflect the new CUCM node at the data center be the only change that I would have to make to the config?
    I also want to say thanks for all the help that everyone has given me with really quick responses to my questions. I just changed jobs and I went from doing primarily MACD to now I'm actually the person who is doing the implementation. I've never done implementation before but I know if I stick with it and help from this board I'll be a super star yet.
    Eric

    Correct, need to change the IP address on the DP to reflect the new one. Also, need to look at SCCP resources (conference bridge or transcoders if any) and those need to be changed. 

  • Posting a question

    I am new to the Discussions forum and want to post a simple question. I would think that posting a question would not require me having to search "how to post a question". It's a bit annoying that it's not obvious. When I click on a category I think there should be a blank space (or something) that says "ask your question here"--like in Yahoo Answers.

    Welcome To  Discussions karibuboo!
    If you have a question, or suggestion, about using Discussions, from this page Feedback about Discussions, click on Post New Topic.
    If you have a Technical question about Apple Hardware, Programs, Services, Technology, Software, Applications, Products, etc, from this page Discussions - Forum Home, select an appropriate Category from one of the sixteen divisions.
    For example, under Mac OS X Related Software, choose the Category Mac OS X v10.5 Leopard.
    On the page that opens, select a Forum, such as Installation & Setup, or Using Mac OS X Leopard.
    Most Category pages, have numerous Forums within them.
    But some may have only one, two, or three.
    For example the Safari Category page has four choices listed under Forum / Category, but only two of them, are Forums:
    Safari For Windows
    Safari for Mac Support forum.
    And the Apple Remote Desktop Category, has only one Apple Remote Desktop Forum.
    On Forum pages, there is an option to Post New Topic.
    Click here for all iPod Forums.
    Click here for all iTunes Forums.
    Click here for all iPhone Forums.
    More info here How Is Discussions Content Organized.
    It can be confusing, but explore the different areas, and you will acquire a better understanding of the hierarchy.
    ali b

  • Not able to post any question

    I am trying to post a question related to PM module but i am not able to post it.
    Can anyone help me in this regard.

    but i am not able to post it.
    this will raise so many questions
    a)  are you able to login ?
    b)  if so, are you able to see "Post New Thread"  ?
    If your answer is "YES" for both the above, then there should not be a problem in posting your question.
    thanks
    G. Lakshmipathi

  • Lost my contacts in ios8 update and now I can't post my question here

    I posted my question here and it got deleted and they told me to go post it on the Developer forum cause it contains info about the new version of OSX coming out next month, but I'm not a developer and the developer forum sends me here if it's a question about using a product. And I have a question about using my iPhone 5s. Please don't delete this question again.
    I updated my iphone 5s (64 gig) and ipad 2 (16 gig) to ios 8 last week and I stupidly said yes to iCloud Drive before I read all the warning signs not to. My photos are still there cause I didn't have them in icloud, but my contacts are gone on my phone. I updated my Mac Mini to (the new version of OSX after Mavericks and I'm hoping if I don't say the name of it this post won't get deleted) and I still see all my contacts on my computer, I'm just not sure how to get them back on my phone. Should I restore my phone in itunes to a previous backup from last month? Figured I'd check here before I went with that.
    Please don't delete this post cause I can't post it in the developer forum. This is a question for the support forum. I am an end user.

    An error message came up on the computer and said it couldn't complete the installation.
    When I plug the ipod into the computer nothing happens.  It sill shows the apple icon on the touch and a bar.  It doesn't show in itunes at all.

  • After posting a question on the community forum page, will I be notified when an answer appears?

    After posting a question on the community forum page, will I be notified when an answer appears?

    Yes, it will be in your mailbox unless you setup not to receive.

  • Workshop Weblogic config questions

    I'm using Oracle Workshop for WebLogic 10.3 and I'm hoping someone can answer some setup/config questions.
    When I double click on the server (WebLogic Server v10.3 at localhost) a window opens with various settings that manage how workshop and weblogic work together.
    Under "Startup & Deployment" I have the following turned on:
    Launch WebLogic server in Eclipse console
    Always start WebLogic Server in debug mode
    Ignore project compilation errors when publishing (I have this turned on because of errors in a portal project, the errors aren't inmportant, and don't prevent the project form running)
    Run stand-alone web module directly from workspace
    So, first question, with these settings I was able to quickly switch to debug mode, with out restarting the server, now the server restarts whenever I turn debugging on. What have I done that has stopped this working correctly? How can I get it to start debugging without a full restart?
    next question, what happens if I turn on "Start WebLogic Server in Express Mode"? As far as I can tell nothing happens.
    Lastly, under "Automatic Publishing" I have it set to "Never publish automatically", if I choose another setting workshop essentially freezes because it's constantly publishing. So whenever I make a change, even in a jsp, I need to remove the project, then re-add it to see my changes in the browser. This is frustrating, not just because it takes 8 or 9 minutes (8 or 9 MINUTES!!!), but because the project doesn't run properly until it is redeployed. You'd think that if it needs to be re-deployed, then none of my changes should matter on the server until it is re-deployed.
    So, my question is, Is there any way to get this re-deployment to happen faster?
    Thanks for any and all help

    Well, in my experience performance is not bad as you experienced. Is it locally connected server or remotely connected server? If it is a remote server, network issue could cause this latency issue.
    Is performance better if you run the server without enabling debug mode? If yes, probably you can also review any break points set.
    You could also try out the following options
    1) Run workshop with -clean option, by opening command prompt and navigating to workshop_home\'workshop.exe -clean'
    2) Untick the option 'Launch WebLogic server in Eclipse console' and start server which would enable server to start on command prompt
    3) This would enable you to take multiple thread dumps (cutl +Break) on the server console output, while performance is very bad, to see where threads are halt.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • I have no idea where to post my question

    I just bought a brand new MacBook Pro. I have so many problems trying to get up and running with this machine, I don't know where to post my questions. My mouse doesn't work right any more, the thing doesn't recognize my printer any more, it won't launch my scanner any more... I have been at this for 4 days now. I just don't know where to begin to ask my questions here I am having so many problems getting this brand new machine to work.
    I was migrating from a Powerbook G4 that worked beautifully. As soon as I got this brand new Macbook Pro and tried to use my Kensington wireless mouse, my HP Laserjet, and Epson flatbed scanner, it seems like the new machine just won't work with any of these items and I don't know where to begin to ask here.
    It took 2 days to get Apple mail working properly on this new Macbook Pro and even my ISP was baffled by the problems encountered.
    Could someone please tell me where I can post my question here about how to get the above stuff working with my new Mac? I am completely exhausted and ready to just return the whole thing.

    Actually Human,
    Here are some possibilities.
    Using Your MacBook Pro
    Any of the the other MacBook Pro Forums
    Printing (Leopard)
    Mail And Address Book (Leopard)
    Using Mac OS X Leopard
    Or any of the other Mac OS X v 10.5 Leopard Forums
    ali b

  • Redundant FWSM Config Question

    Hello All,
    I'm going to be configuring failover with FWSMs for our 6500 at my job and I have a config question. There is one current 6500 chassis with 2 FWSMs installed. They are both online but currently since failover isn't setup, only one FWSM is actually active. My question is since we are using mutiple contexts where do I setup the failover interface, and do I need to configure failover on every single vlan on the FWSM? We have over 10 contexts each with 2-3 interfaces on them, so do I need a failover IP for every vlan that exists on every context? Also, does the failover config get setup on the admin or system context? Any help would be greatly appreciated, and thank you so much in advance!

    Hi John.
    Failover config goes in the system context. For the data interfaces in each context, you will need a primary and a standby IP i.e. 2 IP's per VLAN. Once failover happens, the secondary FWSM will assume the active role and the secondary FWSM will take over the Primary IP address thus making the failover process transparent to end users.
    HTH.
    Regards
    Zubair

  • Why am I required to register BEFORE posting a question?

    Hello,
    In the recent past, I always saw a notation that anyone who wanted to post a question was NOT required to register before posting a question. Now all of a sudden, I would like to know why.

    New rules and new forum software.

Maybe you are looking for