A few problems with IMAP on N78
Hello,
I'm the owner of a Nokia N78 and i'm trying to read my email using IMAP over TLS. It partially works, but I encounter several problems.
The mail server is a dedicated server I run with some friends. It runs Dovecot as an IMAP server, and it uses the Maildir scheme for mail storage. I also sort my mail using many subdirectories. The overall setup works well, I've been reading and managing that mail account using IMAP with Thunderbird for years.
I configured the phone to use my mail account, and it connects to the server and download headers from the inbox without any problem. The two problems I encounter are the following :
- Reading messages is abnormally complicated. When I want to read a message from the inbox which is not downloaded yet, the software asks me if i want to download it, i accept, it connects to the mail server, downloads the message, and displays... a blank screen showing only the "Subject:" word, as if the mail was totally empty. When i go back to the message list, the message I was trying to read has disappeared. I must then connect again to the mail server (using "Options > Connect") to make the message appear again (and marked as downloaded) in the list, and only then can I read it.
- I can't access the other directories. The phone manages to list them, I can see them in Retrieval settings > Folder subscriptions, I can subscribe to some of them and they appear in the list with the Inbox, but when i navigate inside them they are always empty. Options > Connect and Options > Download mail > All don't do anything.
I searched the web and this forum but I found nobody with a similar problem. I tried it many times with many different connections (UMTS, GPRS/EDGE, several wifi networks). I have no problem sending mail (through SMTP/StartTLS) using the same application and the same server. The phone's firmware is up to date.
Message Edited by endyfourbe on 21-Oct-2008 09:08 PM
hello,
I never tried to connect to a dovecot server but I do use N78 to connect via IMAP to Gmail on a standard, not secure, connection. I usually retrieve only the headers for the Inbox then I decide if I want to retrieve the message and then I ask for the attachments. So I guess the 3 steps approach to the email is correct, usually you do it with the same connection open but it could happen that the remote server is closing the connection and so the phone is bringing down the interface for packet data connection.
I mean nothing strange in the 3 stage retrieval, the disconnect could be some problem with dovecot.
The rest looks really weird, maybe I will try to subscribe to different folders and see what happens.
Similar Messages
-
Hi Apple! I am having a few problems with my 6 month old iPad mini (ios 7.1.1). I am using my iPad and then some time later it just restars! Don't know why and it just keeps doing it! Please fix or if I restore my iPad will it do any good? Thank you
Plug your iPad into your computer, open iTunes, and click Restore. This will reset your iPad to factory settings, so make sure everything important is stored safely. Once the restore is complete, do NOT restore from your backup.
If you still have problems, take the iPad to the Apple Store or another AASP (Apple Authorised Service Provider). If you're still within warranty, any service will be of no cost. Check your serial number here or find your receipt.
Hope I've helped!
PS: This is a peer-to-peer forum. Apple generally doesn't pay attention here. -
Ive installed gnome on a fresh arch install.
Ive got gnome and GDM working now but im having a few problems with some of the apps in gnome.
The first problem ive noticed is when i attempt to open "Apperance Preferances" the bug report is:
Distribution: Unknown
Gnome Release: 2.22.3 2008-07-02 (Archlinux)
BugBuddy Version: 2.22.0
System: Linux 2.6.26-ARCH #1 SMP PREEMPT Tue Aug 26 21:15:43 UTC 2008 i686
X Vendor: The X.Org Foundation
X Vendor Release: 10402000
Selinux: No
Accessibility: Disabled
GTK+ Theme: Clearlooks
Icon Theme: gnome
Memory status: size: 0 vsize: 0 resident: 0 share: 0 rss: 0 rss_rlim: 0
CPU usage: start_time: 0 rtime: 0 utime: 0 stime: 0 cutime:0 cstime: 0 timeout: 0 it_real_value: 0 frequency: 0
----------- .xsession-errors ---------------------
(gnome-appearance-properties:3609): Pango-CRITICAL **: pango_color_parse: assertion `spec != NULL' failed
(gnome-appearance-properties:3609): Pango-CRITICAL **: pango_color_parse: assertion `spec != NULL' failed
(gnome-appearance-properties:3609): Pango-CRITICAL **: pango_color_parse: assertion `spec != NULL' failed
(gnome-appearance-properties:3609): Pango-CRITICAL **: pango_color_parse: assertion `spec != NULL' failed
(gnome-appearance-properties:3609): Pango-CRITICAL **: pango_color_parse: assertion `spec != NULL' failed
(gnome-appearance-properties:3609): Pango-CRITICAL **: pango_color_parse: assertion `spec != NULL' failed
(gnome-appearance-properties:3609): Pango-CRITICAL **: pango_color_parse: assertion `spec != NULL' failed
(gnome-appearance-properties:3609): Pango-CRITICAL **: pango_color_parse: assertion `spec != NULL' failed
the next error is when i open the preferances for the file browser
Distribution: Unknown
Gnome Release: 2.22.3 2008-07-02 (Archlinux)
BugBuddy Version: 2.22.0
System: Linux 2.6.26-ARCH #1 SMP PREEMPT Tue Aug 26 21:15:43 UTC 2008 i686
X Vendor: The X.Org Foundation
X Vendor Release: 10402000
Selinux: No
Accessibility: Disabled
GTK+ Theme: Clearlooks
Icon Theme: gnome
Memory status: size: 0 vsize: 0 resident: 0 share: 0 rss: 0 rss_rlim: 0
CPU usage: start_time: 0 rtime: 0 utime: 0 stime: 0 cutime:0 cstime: 0 timeout: 0 it_real_value: 0 frequency: 0
----------- .xsession-errors ---------------------
(gnome-appearance-properties:3609): Pango-CRITICAL **: pango_color_parse: assertion `spec != NULL' failed
(gnome-appearance-properties:3609): Pango-CRITICAL **: pango_color_parse: assertion `spec != NULL' failed
(gnome-appearance-properties:3609): Pango-CRITICAL **: pango_color_parse: assertion `spec != NULL' failed
(gnome-appearance-properties:3609): Pango-CRITICAL **: pango_color_parse: assertion `spec != NULL' failed
** Eel:ERROR:(eel-preferences.c:116):preferences_gconf_value_get_string: assertion failed: (value->type == GCONF_VALUE_STRING)
seahorse nautilus module initialized
** (nautilus:3623): WARNING **: Unable to add monitor: Not supported
** Eel:ERROR:(eel-preferences.c:116):preferences_gconf_value_get_string: assertion failed: (value->type == GCONF_VALUE_STRING)Ive installed gnome on a fresh arch install.
Ive got gnome and GDM working now but im having a few problems with some of the apps in gnome.
The first problem ive noticed is when i attempt to open "Apperance Preferances" the bug report is:
Distribution: Unknown
Gnome Release: 2.22.3 2008-07-02 (Archlinux)
BugBuddy Version: 2.22.0
System: Linux 2.6.26-ARCH #1 SMP PREEMPT Tue Aug 26 21:15:43 UTC 2008 i686
X Vendor: The X.Org Foundation
X Vendor Release: 10402000
Selinux: No
Accessibility: Disabled
GTK+ Theme: Clearlooks
Icon Theme: gnome
Memory status: size: 0 vsize: 0 resident: 0 share: 0 rss: 0 rss_rlim: 0
CPU usage: start_time: 0 rtime: 0 utime: 0 stime: 0 cutime:0 cstime: 0 timeout: 0 it_real_value: 0 frequency: 0
----------- .xsession-errors ---------------------
(gnome-appearance-properties:3609): Pango-CRITICAL **: pango_color_parse: assertion `spec != NULL' failed
(gnome-appearance-properties:3609): Pango-CRITICAL **: pango_color_parse: assertion `spec != NULL' failed
(gnome-appearance-properties:3609): Pango-CRITICAL **: pango_color_parse: assertion `spec != NULL' failed
(gnome-appearance-properties:3609): Pango-CRITICAL **: pango_color_parse: assertion `spec != NULL' failed
(gnome-appearance-properties:3609): Pango-CRITICAL **: pango_color_parse: assertion `spec != NULL' failed
(gnome-appearance-properties:3609): Pango-CRITICAL **: pango_color_parse: assertion `spec != NULL' failed
(gnome-appearance-properties:3609): Pango-CRITICAL **: pango_color_parse: assertion `spec != NULL' failed
(gnome-appearance-properties:3609): Pango-CRITICAL **: pango_color_parse: assertion `spec != NULL' failed
the next error is when i open the preferances for the file browser
Distribution: Unknown
Gnome Release: 2.22.3 2008-07-02 (Archlinux)
BugBuddy Version: 2.22.0
System: Linux 2.6.26-ARCH #1 SMP PREEMPT Tue Aug 26 21:15:43 UTC 2008 i686
X Vendor: The X.Org Foundation
X Vendor Release: 10402000
Selinux: No
Accessibility: Disabled
GTK+ Theme: Clearlooks
Icon Theme: gnome
Memory status: size: 0 vsize: 0 resident: 0 share: 0 rss: 0 rss_rlim: 0
CPU usage: start_time: 0 rtime: 0 utime: 0 stime: 0 cutime:0 cstime: 0 timeout: 0 it_real_value: 0 frequency: 0
----------- .xsession-errors ---------------------
(gnome-appearance-properties:3609): Pango-CRITICAL **: pango_color_parse: assertion `spec != NULL' failed
(gnome-appearance-properties:3609): Pango-CRITICAL **: pango_color_parse: assertion `spec != NULL' failed
(gnome-appearance-properties:3609): Pango-CRITICAL **: pango_color_parse: assertion `spec != NULL' failed
(gnome-appearance-properties:3609): Pango-CRITICAL **: pango_color_parse: assertion `spec != NULL' failed
** Eel:ERROR:(eel-preferences.c:116):preferences_gconf_value_get_string: assertion failed: (value->type == GCONF_VALUE_STRING)
seahorse nautilus module initialized
** (nautilus:3623): WARNING **: Unable to add monitor: Not supported
** Eel:ERROR:(eel-preferences.c:116):preferences_gconf_value_get_string: assertion failed: (value->type == GCONF_VALUE_STRING) -
Problem with IMAP email in E52
Hello,
I have that problem with the email on my E52 v034.001:
I am using my personal email (Gmail via IMAP) and it is working fine, on this one I am receiving few emails a day.
When I am trying to set up my company's email, all the settings are ok, receives emails and then just hangs up, frozes. Sometimes even for like 10 miutes! I can always click on "hang up" button, and it goes back to home screen, but then again it ignores me when i want to go to menu or email for at least 10-15minutes. Then I'm going back to email when it's fine, opening it, it connects and then after few seconds crashes again. Every time I go near email it crashes. I went to settings, i wanted to get my companys email preview on to my homescreen, i just higlighted "email" field and it crashed.
Tested couple of different emails (POP3, IMAP, Exchange) and all of them are working fine. It's this particular one which i am having problems with, and i have no idea why is it happening. My workmates are using blackberries and iphones and it's working fine for them.
Did any of you hear about something like that?I can confirm that this bug was fixed with version 054.003 (15-Jan-2011).
-
Few problems with PS Elements 11
Hi everybody,
I have a problem with my PS Elements 11. I was working on trial and then decided to buy full version, however few things seems to work different than on my trial and I can't find solution.
1) When I copy one image to another it makes transparent layer on it altho capacity is set on 100% still. On my trial image copied or cuted to another pic was looking exactly as original and after I could lower transparency by lowering capacity.
2) When I want to use normal brush and make just one spot, or paint with one line not with a lot of points or other symbols. I thought aerograph function is the reason but it paints with it and normal the same (as many symbols)
3) When I select part of image with square selection tool it makes a circle with it or rounded field but somehow square selected image is finally copied. It seems it finds some borders on img by itself and changes selected square to it.
I would be very glad if someone could help me to resolve those issues. I will feel free to post others also if I they will come to my mind.
thanks!Welcome to the forum.
As Pierre points out, this is the Photoshop, and not the Photoshop Elements Forum.
I will Move the post, and your link will follow, along with any e-mail subscriptions. The PsE Forum is very active and helpful.
Good luck,
Hunt
[Moved to PsE Forum] -
Hi everybody,
I have a problem with my PS Elements 11. I was working on trial and then decided to buy full version, however few things seems to work different than on my trial and I can't find solution.
1) When I copy one image to another it makes transparent layer on it altho capacity is set on 100% still. On my trial image copied or cuted to another pic was looking exactly as original and after I could lower transparency by lowering capacity.
2) When I want to use normal brush and make just one spot, or paint with one line not with a lot of points or other symbols. I thought aerograph function is the reason but it paints with it and normal the same (as many symbols)
3) When I select part of image with square selection tool it makes a circle with it or rounded field but somehow square selected image is finally copied. It seems it finds some borders on img by itself and changes selected square to it.
I would be very glad if someone could help me to resolve those issues. I will feel free to post others also if I they will come to my mind.
thanks!Thank you for your information about my problem with PSE 11. I have since tried the programme on 2 different computers and it works fine. Seems like the problem is with my computer although my old PSE 10 works okay. I'd appreciate any ideas about what could be wrong with my computer to cause my photos to break up into various segments which don't join together particularly when I move them into 'before and after horizontal' or '......vertical' and even when zooming them. ( HP Pavilion Elite) Vista Ultimate.
Regards,
Stervogel. -
Problems with IMAP account in mail
Recently I reconfigured my email accounts from POP to IMAP. My provider supports both.
With POP, never experienced problems in Mail (Lion)
With IMAP, I always get the exclamation mark behind the mailbox name.
Sending messages is no problem. Receiving works from time to time, but i'll always see that error. When I click on the mark, it says that the server returned a fault: reading information from server 'imap.myserver.be' failed.
I checked the settings several times and all is correct. I contacted my provider and everything works fine on their side.
It's very annoying because I'm not sure everything works flawlessly.
Anyone any idea how to solve this issue?Hi,
I am working on this in a topic with another person with some IMAP issues. I have 4 IMAP accounts, and in two of them Use IDLE is checked and in the other 2 it is not. But neither of the ones checked is gray -- in screenshots for support I have not seen it grayed out either.
I think it might be worthwhile to setup the account to NOT have that selected if that can be done -- it may happen by default, but perhaps if caught during setup, not. One very safe way to do this would be to create a New User Account on your Mac, and as that New User, set up Mail to use this same IMAP account, taking care to see if that can be left Unchecked. However, it may happen automatically by some process.
You can also, in your normal User Account, safely remove any IMAP account, if all mailboxes of importance are stored on the server, and add it again. However, let me know first if you have any other accounts in Mail other than this IMAP?
Ernie -
Hi I have had my player for just over year now and a few problems have just come up. First off the power switch is getting harder and harder to use. I am having to push the power button pretty hard now and have to hold it for a little while. Also when connect my player into the computer and go into the creative mediasouce player and click to access my zen micro it says its not connected.
Can anyone help me with these problems.
Its a 5gb zen micro version .02.05 if that means anythingRegarding your connection problems, are you using WMP? It is known to cause connection problems with the Zens.
Have you tried reinstalling the Creative Software?
Have you tried the connection with another PC IF available?
And regarding the power button, I'm guess that it is due to aging? I still have my Zen Micro (even though I use my ZVM) and I do have to hold the power button a little bit longer than before (3-5 seconds more) for it to turn on. Same happens when I use the lock mode (I just tried it)
and it's kinda rough for it to push instantly (effortless but still feels a little rough).
Good luck with your connection, let us know if it worked! -
A few problems with my site I'd be grateful for help with...
Hi, I'm encountering some strange problems with my website, and I'd be really appreciative if anyone could help me. The site's live so I've included links to help anyone kind enough to respond. Thanks in advance.
1. On many of the pages, a scrollbar appears at the width of the container as opposed to the browser window. The 'clear' property doesn't seem to work, (although I am quite new to it so could have made some sort of basic error).
http://austinlindsay.com/suretowin.html
2. I'm having difficulty with the 'screenshots' on the left hand side of the page. First, the larger images should only appear when hovering over the thumbnails, but they seem to appear when hovering over the space where they appear.
The second problem is trying to make the background of the larger images consistent with their individual images in the foreground. Problem is the background always have a fixed width across the page. You can see what I mean when hovering over the final screenshot (called 'Scoreboard')
http://austinlindsay.com/virtuoso.html
Two problems with the 'Featured' section. The central link jilts slightly when hovered over. It's really strange. I've tested it by changing the order and putting a different link in the centre, and found it's not a problem with a link, it's a problem with it being positioned centrally. I couldn't find a solution for it, though. The final problem with this is that a horizontal scrollbar appear when hovering over any of the links (apart from the final one, Logos, for some reason).
http://austinlindsay.com/
I know there's a lot of problems here, but thanks in advance to anyone who can help!No, there is definitely no height property on the container (or the content which is causing the problem). But to be fair, it may be because the content that gets hidden is, until hovered over, not visible. I've posted the code for that below, along with the container if anyone could help?
/*main container*/
#content {
position: relative;
left: 0px; right: 0px;
width: 960px;
background-color: #333;
padding-bottom: 3em;
border-top: 0.1em solid #FFF;
border-bottom: 0.1em solid #FFF;
overflow:hidden;
/* container for the screenshots content below this*/
#main_content {
position: relative;
margin: 0 40px;
top: -160px;
/* screenshots - content that seems hides itself*/
#screenshot_list {
position: relative;
left: 72px;
#screenshot_list a {
border:none;
text-decoration:none;
padding: 5px 0px;
display:block; /**space between icons**/
position: relative;
width:150px;
#screenshot_list a span {
visibility:hidden;
display:block;
position: absolute;
/**adjust positioning of full size images in px or %**/
left: 130px;
top: 0px;
/**optional image captions**/
font-size: 13px;
line-height: 1.2;
color: #FFFFFF;
text-align: left;
background-color: #455c5a;
background-repeat: no-repeat;
/**optional image borders & padding**/
border: 2px solid#455c5a;
padding: 15px;
z-index: 100;
#screenshot_list a:hover span, #screenshot_list a:active span, #screenshot_list a:focus span {visibility:visible; z-index: 100;
padding: 15px;
#screenshot_list a:hover, #screenshot_list a:focus
{visibility:visible;
border: none;
z-index: 100;
padding-left:2px; -
A few problems with the ipod touch
Hi all,
Just trying to get some feedback from everyone. Firstly I love the ipod touch, I reckon it was a great buy compared to all the other new ipods (please dun shoot me on this, this is my opinion :P) but I've noticed some problems with it and was wondering if anyone else has the same problems.
Firstly when I sync the touch to my computer and change the name/details of 1 movie file, when I go back to the touch in the videos section the frame that is used on the list goes missing and defaults into the generic one (the grey looking monitor). I'm not sure why. I cannot get it back no matter what I try.
Another thing, I swap back and forth syncing using my MacBook Pro and my Toshiba Tecra (XP SP2) depending on which one I'm using at that particular moment. It's fine for music, but when I try to upload any kind of movies on the Tecra it seems to give me a BSOD. Something to do with the QT program files clashing with the system. Anyone had this problem before? And as a result I would just go to my MBP to upload movies and such.
Any kind of feedback and help is greatly appreciated. Thanks for your time all.Try here (you likely tried most of these).
iOS: Not responding or does not turn on
If not successful then time for an appointment at the Genius Bar of an Apple store. -
I'm having quite a few problems with Muse, here's one of them.
When I edit my site in the Muse application, this is how it looks:
When I publish it, this is how it looks:
On top of this, similar things are happening with the length of master pages not correlating with the individual content pages. Can anybody explain this and maybe suggest how I can fix it? Obviously this is unusuable at the moment so I'm in need of a fix. Thanks.As to your installation problems I'm not sure I have enough information to help you there. What do you mean by initialize? Are you having this problem with every program you install? What program and version are you trying to install?
As to the problem playing Windows Media Files there are plenty of players out there. One that I use is called VLC. It's a free solution and will play a wide variety of formats.
http://www.apple.com/downloads/macosx/video/vlcmediaplayer.html
Good Luck!
FW800 Dual 1.25Ghz & 15 PB G4 1.67Ghz Mac OS X (10.4.1) -
A few problems with Leopard running on my White iMac...
I have only found 2 problems so far with Leopard running on my iMac. First off, the most annoying one:
Sometimes, especially when switching users, the screen turns to the "gray screen of death." You know, the one with the request to restart your computer in like 4 languages and a huge picture of a power button... anyway, it is getting quite annoying and I wish I could make it stop. It has also happened when I have been dealing with moving large amounts of data, "large pictures, movies, etc.)
And now, the second problem. I was just looking up the memory left on my hard drive when I noticed something I hadn't before. my 160gb hard drive had 50gb left. not too strange there. but when I checked through all the things (apps, users, system, library, developer, etc.) in it (I simply did apple-i and checked the gb each of them took up) and after a quick add-up on my calculator widget, all the things in the hard drive added up to 50gb. so I have 50gb free, 50gb used and a 160gb hard drive. How does that work? Do I need to do something to get that extra 60gb back or is it just gone???STEVE!!! wrote:
Is there any way just to show hidden folders like on a PC?
There's probably a way to coerce Finder.app into showing everything
(all is possible in unix) -- but I don't know the OS-X magic words.
It told me that improper of the "sudo" command could lead to data loss
and i don't want to risk doing anything stupid (like a misspelling) that
could lead to my hard drive being wrecked.
Good advice. IMO, the 'du' (disk usage) command is safe, because it's
'read only' -- but I undestand that you'd be hesitant to trust your data
to advice fom an anonymous voice from "The Internets." I can't/won't
argue with common sense.
You can run the same command without the 'sudo' prefix. It might
miss a few things and/or spit some 'permission denied' messages,
but the results will at least be a lower-bound of disk usage.
...in the beginning was the command line,
Looby -
Serious performance problems with IMAP
Hi,
our Groupwise server runs on SLES10 SP4, has about 2500 accounts in 7 postoffices, one gwia, one mta and webaccess.
When IMAP is activated on the gwia, the cpu load goes to 99% after a couple of hours, making the server unusable. When I turn IMAP off the cpu load is stable under 1%.
We have already limited the number of items per folder to 1000.
Where do I look? What do I do? I'm at my wits end!!!
MikeOn 1//20/2012 7:05 AM, Steven Eschenburg wrote:
> We were having a similar issue with our 8.0.2 GWIA running under Windows
> Server 2008 on a VM, and adding a second CPU cut the CPU utilization
> down substantially.
>
>
> >>> tgm its<[email protected]> 1/20/2012 7:36 AM >>>
>
> konecnya;2169415 Wrote:
> > In article <[email protected]>, Tgm its wrote:
> > > When IMAP is activated on the gwia, the cpu load goes to 99% after a
> > > couple of hours, making the server unusable.
> > >
> > Is this just a single core single CPU system? If not make sure you are
> > running the SMP kernel.
> > uname -a
> >
> Yes, it is a single core singel CPU system. It's a virtual machine on a
> SLES10 xen host.
> uname -a:
> Linux gw1 2.6.16.60-0.85.1-xen #1 SMP Thu Mar 17 11:45:06 UTC 2011
> x86_64 x86_64 x86_64 GNU/Linux
>
> konecnya;2169415 Wrote:
> >
> > confirm that it is actually GWIA using up all that CPU and not
> > something else or a mix of things. Knowing what exactly is busy will
> > help.
> > top
> >
> > With 'top' if you have enough width to your terminal session, hitting
> > 'c' will tell you which POA is the offender if one is being the
> > problem.
> >
> Yes, I'm sure its gwia and not a postoffice. Gwia is using 99% of the
> cpu time.
>
> konecnya;2169415 Wrote:
> >
> > As per Michael, do make sure maintenance has been run on all the Post
> > Offices and do so from the top-down approach as per TID 3347260
> > (formerly TID 10007365)
> >
> http://www.novell.com/support/dynami...rd=nonthreaded
> <http://www.novell.com/support/dynamickc.do?cmd=show&forward=nonthreaded>
> > KC&docType=kc&externalId=3347260&sliceId=1
> > If you don't have most of this automated, I wrote up the steps a while
> > back that still does the trick, ideally not running them all at the
> > same time on that system.
> > 'GroupWise Maintenance' (http://www.konecnyad.ca/andyk/gwmnt5x.htm)
>
> Mike
>
>
> --
> tgm_its
> ------------------------------------------------------------------------
> tgm_its's Profile: http://forums.novell.com/member.php?userid=93411
> View this thread: http://forums.novell.com/showthread.php?t=451021
>
>
>
Yes, this would be my next step. You do have a fair amount of users. Is
allocating another core an option? -
Connection Problems with iMAP and Mail in Mountain Lion
Hi everybody,
since the Update on Mountain Lion I am having the following problem:
When my iMac wakes up after some time, Mail isn't working anymore by showing the triangle with the exclamation mark. By clicking on it it shows the following picture (sorry for being in german). What you see is, that the internet connection works fine but Mail says it cannot connect to the iCloud iMAP Server. I should check if iCloud supports SSL and if it does not, deactivate it...
After closing Mail an reopening it again, everything works fine until the next episode of waking up...
Any hints??
Thanks!!
StefanIf you do, I highly recommend wiping the harddrive and doing a clean
install. An upgrade install, especially from two versions back is going
to be nothing short of a crapshoot.
Deactivate any software before doing so. -
Nokia 5800Xpressmusic problem with IMAP notificati...
Hi everyone,
I've just bought the 5800XM in Hong Kong. Everything seems to work correctly so far except the new email notification. I have set up a 2 gmail account in IMAP mode and for the first one, everytime I active the automatic retrieval every 5min, I have two MAIN anoying issues :
1° it downloads ALL my emails headears (+2200!!!), the processor goes so slow as you can imagine during the first connexion NO POSSIBILITIES TO LIMIT the number of emails downloaded !!
2° After that it connects automaticaly every 5min as set up but these times it doesn't download new emails !!!
For the second account which has only a few emails in it, it retrieves every new emails but WITHOUT NOTIFICATION NO SOUND NO ALERT NOTHING !!! I have done everythings.
Thanks for some help !!You have to remember another important thing - this is not just the 5800, the business orientated E90 has the same problem in recent firmware which wasn't there in the original firmware. I don't really think your argument about it not being a business centric phone applies either, Nokia have already given the 5800 the standard S60 client so clearly they've decided that despite it being music-centric, it should still have a mail client. And this is a bug, not a feature - it's quite simply stupid to only allow the phone to download every mail, it would make far more sense to be able to use the limit system they have in place, only download new mail or to allow the auto-update portion (which has the limit) to connect to the mailbox automatically. The current system is actually more complex than either of those as it actually goes and downloads everything, unfortunately it's an undesirable 'feature' as the phone simply cannot do it as it will keep downloading until it actually kills itself.
Message Edited by johnmcl7 on 02-Feb-2009 05:21 PM
Maybe you are looking for
-
Using fieldnames table in GUI_DOWNLOAD method
Hi Experts, I need to download an itab data with field names as headers. I am using this but getting error 'Formal parameter "FIELDNAMES" does not exist. However, the parameter "FILENAME" has a similar name'. CALL METHOD cl_gui_frontend_services=>gui
-
When I go to do an update for my apps on my iPhone 4S it says that I am connected to the Chinese iTunes Store and tha I need to switch to the US store. How do you do that?
-
i have an old mac book os x version 10.4.11 and an old iphone 3g. i've never had a problem syncing and backing up before, but the last time i did, it deleted my contacts on my iphone and my phone/address book entries on my mac book. any suggestions
-
I just received my new t430 and having issue with dual monitors. I am using the Intel HD 4000. I have it connected to a ThinkPad Port Replicator Series 3 (Type 4336). The docking station only support VGA connection. My new t430 only has a VGA connect
-
Why can't I get the "Install App" button in the app store to work for OX Mavericks?
I am trying to install OS Mavericks and I can not get the "Install App" button to work in the App store. When I double click it runs for 2 seconds and then stops. I am running OS Lion 10.7.5 now so I should be able to install and run OS Mavericks.