A few Q,in editing Adobe Premier Elements #12

A few Q, if anybody can help me. 1. How do i edit/zoom only one section? 2. How do i close all gaps (not tracks). how do i switch between tracks  Thank you,

theizzy
On what computer operating system is your Premiere Elements 12 running on?
Edit/Zoom only one section of a whole clip....that introduces the concept of keyframing and specifically keyframing the Scale property under Applied Effects/Applied Effects Palette/Motion Panel expanded where you can find the Scale property (for Zoom) and the Position property (for Pan).
Adobe Premiere Elements 11 * Changing effect properties
There are also way of keyframing at the video and audio clip's rubberband level.
ATR Premiere Elements Troubleshooting: PE: Rubberband Options Detailed
Provided there are no clips above or below that particular area which would interfere with the process, right click the gap, click on the resulting "Delete and Close Gap" pop up. There is always the consideration of closing the gap using the mouse curse to click and drag the clip over to close the gap. There can be problems...
http://atr935.blogspot.com/2014/02/pe-delete-and-close-gap-failures.html
What exactly do you mean "switch between tracks"? The content on the upper track will be what is seen in the monitor unless there are transparency in the file. You open the track, select it contents, and work away. I suspect that you have something else in mind, so please give more details on what you seek in this regard.
Thanks.
ATR

Similar Messages

  • I am attempting to upgrade from Adobe Premier Elements 9 to Adobe Premier Elements 13 after using 13's trial version for a few weeks.  I am unable to find where and how to do this without losing the project I have been working on.  Please help?

    I am attempting to upgrade from Adobe Premier Elements 9 to Adobe Premier Elements 13 after using 13's trial version for a few weeks.  I am unable to find where and how to do this without losing the project I have been working on.  Please help?

    Vere Clarke
    Premiere Elements 9.0/9.0.1 and Premiere Elements 13 are standalone products.
    So, you can have both on the same computer, but only open one for your work.
    The classical recommendation is to finish a project in the version in which it was created since there
    is no guarantee that a project from an earlier version will open in the later version. Probably will, but
    no guarantees. And, when you do explore this, do it from a copy of the earlier version project. Once you
    take the earlier version project into a later version one, you cannot go back to edit the later version edited
    project in the earlier version program.
    If you have both versions (9 and 13) on the same computer and you have not moved, deleted, renamed any of the version 9's files/folders,
    right click the saved closed Premiere Elements 9.0/9.0.1 project file, select Open With, and then Adobe Premiere Elements 13.
    (Your 9.0/9.0.1 saved closed project file should be found in Libraries/Documents/Adobe/Premiere Elements/9.0.)
    Please review and consider. If any questions or need clarification, please do not hesitate to let me know.
    Thank you.
    ATR

  • ADOBE PREMIER ELEMENTS 7 Starts OK but Crashes during Editing

    This program lets me open and import up to 30 small Video clips ,while editing  it's about this stage that it displays the following warning box :-  ADOBE PREMIER ELEMENTS IS RUNNING LOW ON SYSTEM MEMORY. PLEASE SAVE YOUR PROJECT & PROCEED WITH CAUTIION........OK (button).
    My computer is a HP ELITE PAVILION with 4 gb. of system memory , I have taken it for granted that this should be adequate for this type of program.... is this correct or there something else wrong ??
    The program case has a note that it is for Win.XP or Vista & I am using Win.7 is it posible that it might nead a patch to make it better ??
    I would appreciate if someone could ASAP be of a help to me....All the best....Bill Ellis

    Hi Bill
    Open the program and click Edit >>Preferences >>Scratch Disks
    This should show the amount of spare memory for performing tasks.
    If low you could add more disk space e.g. an external hard drive rather than main memory.
    In general the software pre-dates Windows 7 but if it will run on Vista it should perform satisfactorily on W7.
    If you need any more advice I would recommend going directly to the video forum.
    http://forums.adobe.com/community/premiere_elements

  • I am a professional photographer of many years standing and at the moment I have a student for 12 months, who I am teaching how to use various Adobe programs, but to introduce her to video editing, I have purchased Adobe Premier Elements 13 which is less

    I am a professional photographer of many years standing and at the moment I have a student for 12 months, who I am teaching how to use various Adobe programs, but to introduce her to video editing, I have purchased Adobe Premier Elements 13 which is less complicated than the Premier Pro that I use. The program works perfectly, except for one thing.... when adding a title to the short video sequence we are working with, if I use a particular font (Metallophile Sp8) which I obtained from my Adobe Typekit, it crashes the program,.... all other fonts work perfectly....can anybody help me please?

    clivephoto
    What computer operating system is your Premiere Elements 13 running on? And what video card/graphics card does this computer use?
    From your description, can I assume that this Mettallophile Sp8 font is being recognized by Premiere Elements 13 to the extent
    that it can be seen and remains seen in Titler's list of font choices - even after the crashes?
    If you opened a new project, imported nothing, and created a text title in the Titler with this Mettallophile Sp8 font, does the program crash?
    Please review the following which discuss fonts and Premiere Elements and determine if anything in it helps.
    Fonts & Crashes with Titler
    Let us start here and then decide what next.
    ATR

  • Buying a new computer and want to also get Adobe Premier Elements 9 to video edit.

    Buying a new computer and want to also get Adobe Premier Elements 9 to video edit.
    What cpu/ram/video card etc do I need to get to ensure good performance from software eg when rendering etc.

    Hi RossW57,
    For the system requirements for Adobe Premiere Elements 9, see http://kb2.adobe.com/cps/863/cpsid_86324.html#main_System%20Requirements
    If you are planning to upgrade to Adobe Premiere Elements 10, use the doc http://www.adobe.com/products/premiere-elements/tech-specs.html
    Thanks,
    Preran    

  • Why does adobe premier elements render my video everytime i change something in it even when i have lots more of the video to edit? other editing software only seems to render at the start then lets you edit until your ready to save at the end.  Constant

    why does adobe premier elements render my video everytime i change something in it even when i have lots more of the video to edit? other editing software only seems to render at the start then lets you edit until your ready to save at the end.  Constant rendering means its almost impossible to edit anything. Please help.

    H TheGamer
    What version of Premiere Elements and on what computer operating system is it running? It will not influence my answer but will give me information in case I need to get into version specifics to detail my answer further.
    Timeline rendering is a preview matter. It does not fix anything, but it is your window of opportunity to catch of problem sooner than latter. If the Timeline rendering indicator displays orange (11 or higher) for the line above the Timeline content, that is the project telling you that you are not getting the best possible preview of the playback of that content in the Edit area monitor. And, every time you edit a file, you have altered the file from the time before. So, if you want to see the best possible for what you now have, you Timeline render. This is particularly helpful when you are dealing with titles, effects, transitions, and non native formats. You cannot turn off the Timeline render indicator system, at least none that I have ever found nor seen reported. You can do selective Timeline rendering by having the gray tabs of the Work Area Bar span only the Timeline segment that you want Timeline rendered.
    Consequently, you either ignore the Timeline render indicator system, move on in the project, and take your chances in the outcome or you Timeline render to get your best possible preview if the Timeline render indicator is suggesting that you do so.
    I am not approving or disapproving of this project feature, just commenting on the what is.
    This is not Adobe. Rather user to user. If you want to have your voice heard at Adobe, you might consider filing an Adobe Feature Request Bug Report Form.
    https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
    Please consider.
    ATR
    Add On...it is also possible to do Timeline rendering in a project, save close the project, and reopen it to find your previously "green" lined content now "orange", indicating unrendered. Yet the preview files generated originally by Timeline rendering are still existing in their hard drive save location. That is another story for other time.

  • .FLV Format to Adobe Premier Elements 4 for editing -- Difficulty

    Hi:
    Have Dell Dimension 4600 with 2.4 GigHz CPU
    WINXP with SP-2
    RAM = 1 GIG
    2 HD's (20 & 200 gigs)
    I recently downloaded from YouTube a lot of
    videos by using RealPlayer's software (version 11),
    which uses the .FLV format.
    I want to transfer them to Adobe Premier Elements 4
    for editing, but it will not accept this format.
    I tried using Virtual Dub and/or MPEG-Streamclip
    to change this format and they too would not
    recognize this .FLV format
    Any suggestions??
    Thanks

    Hi again:
    Have some questions about the Moyea FLV Plug-in:
    As previously stated, I have been using the Prism Video converter,
    which does seem to convert the FLV file to some type of an AVI file.
    I then load this AVI file into Premium Elements 4 (PE4), and it first
    has to be "conformed" in the PE4 software.
    Then, if one attempts to open and edit this file, it either is an ex-
    tremely slow process, or the software freezes, requiring a re-start
    (sometimes multiple times) to complete the editing before rendering
    it into an edited AVI file.
    Curious to find a work-around, I avoided this first time editing
    and just had the PE4 software just re-render the whole intact
    Prism-generated AVI file into a PE4-generated AVI file which has
    apparently much less "overehead" and can easily be edited in PE4.
    so, I end up re-re-rendering the original FLV to get the edited AVI
    file I want.
    Does the Moyea FLV Plug-in avoid this labor-time intensive task??
    Also, its web site advertises 2 different packages:
    1) FLV Importer Pro for Adobe Premiere:
    "FLV Importer Pro for Adobe Premiere is a plug-in program for Adobe
    Premiere. Adobe Premiere is a professional and popular video editing
    tool, which allows importing video and audio in various formats, like
    AVI, MPE, MPG, M2V, MP3, WMV, WMA, WAV, etc.
    Yet, it does not support the FLV file, which is widely used on the
    web. FLV Importer Pro for Adobe Premiere is just a program to make
    Adobe Premiere accept the FLV file for video editing and composing."
    Price: $60
    2) FLV Importer for Adobe Premiere:
    "FLV Importer for Adobe Premiere is the same with the Pro version,
    except the Flash 8 alpha video import and cheaper with 20$ off!
    It is a plug-in program for Adobe Premiere.
    Adobe Premiere is a professional and popular video editing tool, which
    allows importing video and audio in various formats, like AVI, MPEG,
    MPG, M2V, MP3, WMV, WMA, WAV, etc. Yet, it does not support the FLV
    file, which is widely used on the web.
    Support FLV files encoded by any codec,like:
    Flash 8, H.263, RAW, ADPCM, MP3, Nellymoser.
    FLV Importer for Adobe Premiere is just a program to make Adobe Prem-
    iere accept the FLV file for video editing and composing."
    Price: $40
    (version 2)
    The product sites of Moyea Software:
    Video-to-flash.com, Flvsoft.com, My-video-converter.com.
    The homepage of Moyea Software:
    http://www.moyea.com
    Which one is the most practical to get??
    The site offers a "Free Trial"--is that worthwhile??
    Finally, is this site trustworthy??
    I am using the PE4 mainly for the conversion of FLV files and would
    appreciate any rational method for accelerating the process.
    Thanx.

  • I need to know that Adobe Premier elements 12 will do the following; allow for zooming in of recordings (i,e, can zoom in on items I edit); Can display orgiinal and zoomed recordings side by side; and allow for frame-by-frame playback

    I need to know that Adobe Premier elements 12 will do the following; Allow for zooming in of recordings (i,e, can zoom in on items I edit); Can display orgiinal and zoomed recordings side by side; and allow for frame-by-frame playback.
    Is this possible?
    Any input is appreciated! Thank you.

    Tom
    Thanks for the reply.
    Your thoughts on frame by frame viewing are can do. However, the real time playback feature includes the concept of rendering the Timeline, when the program indicates the need to do so,  to get the best possible preview of what you are seeing in the Edit area monitor. That is a major novel in itself. Each time you do a new edit you will get the render indicator message to ignore or act on.
    Definitely go the free 30 day tryout route for Premiere Elements 12. I have Premiere Elements 12 (updated to 12.1) and it runs fine on Windows 8.1 64 bit.
    Best start with the Premiere Elements 12 Help PDF.
    http://helpx.adobe.com/pdf/premiere-elements_reference.pdf
    Also please review by blog posts Premiere Elements 12 First Look and Premiere Elements 12 Daily Discovery.
    http://www.atr935.blogspot.com/2013/09/premiere-elements-12-first-look-details.html
    ATR Premiere Elements Troubleshooting: Premiere Elements 12 Daily Discoveries
    When you get to the point of hand on with a mini test run project, I can offer to work with you through some specific workflow details in post exchanges in your thread(s). And we can sort out the can and cannot do.
    ATR

  • Trial edition of Adobe Premier Elements

    I want to make my video on Adobe Premier Elements 11 but im using the trial version. Everytime i put a picture, in the background, it says "created with adobe premier elements trail version". How do i delete that from my movie?
    Please someone help me. I'm desperate.

    Welcome to the forum.
    As has been stated, as long as the copy of PrE is the "trial," that watermark will appear, and be embedded in any output file.
    When you do purchase the program, and plug-in your S/N to convert from trial to full-paid, you can remove that watermark, for subsequent output, but be sure to Delete any Render Files, as mentioned in that FAQ Entry, posted by John T.. That is an important step, and remember, any files output FROM the trial, WILL always have that watermark.
    Good luck,
    Hunt

  • How to import AVI files created in Adobe Premier Elements 2?

    I have captured video in Adobe Premier Elements 2 on my PC from my Canon Optura camcorder. I have a few hundred small .avi files that I need a friend to import into his Final Cut Pro so they can be edited along with other footage that he has created. What is the best way to do this? Should I output a different file type from Adobe to make it easier for him to import?
    Thanks in advance.
    Bob

    David Bogie Chq-1 wrote:
    Should I output a different file type from Adobe to make it easier for him to import?
    <
    No, it would be easier to give him the camera and let him capture natively.
    bogiesan</div>
    Unfortunately the clips are dispersed throughout many tapes so it is not reasonable for my friend to capture directly from the tapes.
    I'm new to video editing and I don't know what format is recorded by my camcorder. Reading in this forum indicates that the .AVI files are just "wrappers". Is the compressor part of Final Cut? Would he be able to convert the files? Is it a problem if the time codes are lost. Can I do anything else in Adobe to make the conversion easier?
    Sorry for all the dumb questions.

  • Adobe Premier Elements 9 stopped working randomly, Please help!

    Just recently when I try to open my Adobe Premier Elements 9 and an error message keeps popping up that says "We have detected an incompatible display driver, please update. HD Graphics 4400 3.0.0 - Build 10.18.10.3977." I went and updated the driver but every time I try to open Premier the pop up keeps popping up and when Premier does open, the video tracks on my timeline will not show on the play back screen so it makes editing impossible.
    I have had this same Adobe Premier Elements 9 since 2011 and had no problems until about a few days ago.

    If you are on Windows, it is VERY likely that a Windows update has changed something
    Display driver & Baddriver http://forums.adobe.com/thread/1370916?tstart=0 may help
    If you are on Windows, do you have dual graphics?
    Go to the Windows Control Panel and select Hardware and Sound and then select Device Manager... In Device manager you click the + sign to the left of Display Adapters... and see if 2 are listed
    IF YES, read below
    -http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
    -http://forums.adobe.com/thread/1001579
    -Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
    -link to why http://forums.adobe.com/message/4685328
    -http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2

  • Adobe Premier Elements 7- crash-when burning says" Please insert a blank disk" and already a disk in

    I have a Adobe Premier Elements 7. I have had a lot of problems with it of crashing and not burning.. I just had my computer wiped out and installed everything back on like windows xp service pack 3..etc. First I have Windows XP service pack 3 with an Intel Core 2CPU ,6400 @213GHz, 2.13 GHz, 1.98 GB of RAM.  When I went into disk menus premier elements 7 crashes... why is that??? also I tried to burn a DVD and does the progress of burniing and almost done burning WHILE there is a dvd in the drive and says"Please insert a blank disk and click ok to burning" why doe sit do that also? I just had adobe reinstalled and my computer wiped out? Please respond and help.. I am using this program as a business of video editing and nee this solved.

    Along with Steve's questions, let's talk about the process of Burning a DVD-Video.
    From PrE, which is doing the authoring of the DVD-Video, the first thing that happens is a quick check of the Project and the Menu Set chosen. This happens in an instant. Next, the program must Transcode the Timeline to MPEG-2 that is fully DVD-compliant. This takes some time and is a very intensive process, stressing the computer, and also heating things up greatly. This process will often cause a poorly ventilated, or poorly cooled computer to crash with either a reboot, or a BSOD (Blue Screen of Death). Every component, save for the video card, will be stressed like few other programs can do. PrE uses a 2-pass Transcode, where it goes through the entire Timeline, and maps out sections with high motion, or great detail. It builds a "script" on how to proceed, and then goes back at the Timeline with that script, but also still looking for ways to improve things. This is about 90% of the entire Burn Disc process. Nothing has yet to be burned. Instead, files are created in the Scratch Disk folders. Now, the program takes those newly created MPEG-2 files, the Menus, and all navigation such as Markers, and assembles them into another working folder, in the full DVD structure of VIDEO_TS folder with the IFO, BUP and VOB's. When this is done, the actual physical Burn starts. This is quite a ways into the total process. It is at this point, that the program looks at the burner and the blank media, and not before.
    When the program cannot get the necessary info from the burner, or the blank media, it will throw an error message, similar to yours. Also, "SenseCode Errors" usually indicate a problem with the burner, or the media.
    Now, let's address this last bit. Is the firmware for your burner up to date? If not, update/flash the firmware. This will be available from your burner mfgr's. Web site. Next, what brand of blank media are you using? Verbatim and Taiyo Yuden are the most recommended brands. Memorex, TDK, newer Ritek and all store brands should be avoided at all costs. Last, is your burner a fully-certified multi-drive? If so, it should be able to handle +R, or -R media. What type are you using, and are you sure that this is blank media, and not a disc that you have already burned, or even attempted to burn?
    Hope that we can stop the crashes, and get you to burning.
    Good luck,
    Hunt

  • Hi, After I try to load either an existing or new project in Adobe Premier Elements 9 I just get a blank grey screen with none of the timeline, etc. boxes on view. This has suddenly happened, one day OK next not! At the top of the screen I get the normal

    Hi, After I try to load either an existing or new project in Adobe Premier Elements 9 I just get a blank grey screen with none of the timeline, etc. boxes on view. This has suddenly happened, one day OK next not! At the top of the screen I get the normal Pre icon, File, Edit, Clip, etc.
    I am planning on purchasing Premier Elements 13, would it be better if I bought a new program rather than download an upgrade, just in case the upgrade doesn't load properly due to the error with my existing program?
    If I the deleted Premier Elements 9 on my PC would I lose all my existing videos that were produced using Premier Elements 9 or would they be saved so that they can still be worked on in Premier Elements 13?
    Does Premier Elements 13 work with Windows 7?
    Thanks
    Terry

    Premiere Elements 13 absolutely works with Windows 7!
    In fact, I'd highly recommend you download the free trial and give it a test run.
    Meantime, go to Windows Update and make sure you have all of the latest Windows updates, including those that don't install automatically. Then go to the nVidia or ATI site and ensure you have the latest driver for your graphics card, and go to Apple.com and ensure you have the latest version of Quicktime, per the program's requirements.

  • Sorry, a serious error has occurred that requires Adobe Premier Elements to shut down.

    I have Adobe Premier Elements 7. When I launch the application then try to begin using it an error is presented which advises Sorry, a serious error has occurred that requires Adobe Premier Elements to shut down. We will attempt to save your current project.  When I click OK the program shuts down. I have tried fixes I have found on the Forum. I have also uninstalled and reinstalled the program.

    From the Premiere Elements Information FAQ http://forums.adobe.com/thread/1042180
    •You MUST use an account with Administrator Privileges to run Premiere Elements
    •(Doing Run as Administrator http://forums.adobe.com/thread/969395 [says Encore and also for "All" versions of Premiere] will sometimes fix "odd" errors)
    •What version of Premiere Elements? Include the minor version number (e.g., Premiere Elements 12 with the 12.0.1 update).
    •What operating system? This should include specific minor version numbers, like "Mac OSX v10.9.4"---not just "Mac"
    •Has this ever worked before?  If so, do you recall any changes you made to Premiere Elements, such as adding Plug-ins, brushes, etc.?  Did you make any changes to your system, such as updating hardware, printers or drivers; or installing/uninstalling any programs?
    •Have you installed any recent program or OS updates? (If not, you should. They fix a lot of problems.)
    •What kind(s) of image file(s)? When talking about camera raw files, include the model of camera.
    •If you are getting error message(s), what is the full text of the error message(s)?
    •What were you doing when the problem occurred?
    •What other software are you running?
    •Tell us about your computer hardware. How much RAM is installed?  How much free space is on your system (C:) drive?
    •How many and what speed are your hard drive(s)... ie 5400rpm or 7200rpm or?
    And some other questions...
    •What are you editing, and does your video have a red line over it BEFORE you do any work?
    •Which version of Quicktime do you have installed?
    •What is your exact brand/model graphics adapter (ATI or nVidia or ???)
    •What is your exact graphics adapter driver version?
    •Have you gone to the vendor web site to check for a newer driver?
    •For Windows, do NOT rely on Windows Update to have current driver information
    •-you need to go direct to the vendor web site and check updates for yourself
    •ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
    •nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us

  • Upgrade to Adobe Photoshop Elements 4.0 plus Adobe Premier Elements 2.0

    I currently have Adobe Photoshop Album Starter Edition 3.0
    I would like to purchase the Adobe Photoshop Elements 4.0 plus Adobe Premier Elements 2.0. for more photo and video options.
    I'm offered one of two options. Either buy the Full Version or the Upgraded version of Adobe Photoshop Elements 4.0 plus Adobe Premier elements 2.0.
    I don't want to lose any of my videos or photos in my Adobe Photoshop Album Starter editon 3.0.
    Will the Upgrade over the Full Version be sufficient?
    Thanks,

    The upgrade only applies if you already have a paid-for version of these programs. You cannot "upgrade" SE.
    > I don't want to lose any of my videos or photos in my Adobe Photoshop Album Starter editon 3.0
    That isn't an issue. Your pictures aren't "in" PSA SE, it is just cataloging what's on your disk. In any case, the catalog will be usable by PSE 4 Organizer, so all your tags etc. will be preserved.

Maybe you are looking for